Can not connect itunes to the internet!

I have a LAN connection, I have allowed itunes through the firewall, I ran the network connectivity test and it said network connection timed out and it never successfully connected to the internet. I'm not very good with computers, and could really use some help!
Thanks!

Try this:
Head to your Start Menu
Then click Control Panel located in the right hand menu part.
Then look for Network & Internet and click on that.
Then you want to click on Internet settings
Next, head over to the "Connections" tab
From there, click LAN Settings at the bottom.
Make sure, try putting a check mark next to the "Automatically detect settings" or remove it and hit Apply and then try reconnecting to the store.
If that doesn't help, try flushing the DNS. Instructions on how to do this can be found in the Apple document below. Hope this helps.
http://support.apple.com/kb/HT1527
B-rock

Similar Messages

  • I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
    Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac.

  • Can't connect wirelessly to the Internet

    Hi all,
    hope someone can help me with this.
    I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
    My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
    However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
    When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
    Any help greatly appreciated!
    thanks
    Nat

    OK, here it is again
    First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
    I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
    Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
    There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
    The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
    Michael

  • My safari icon vanished from my desk top in a puff of smoke.  I can not gain access to the internet

    I believe I might have accidentally deleted my Safari icon from off my desktop.  I can not gain access to the internet even from a link off an email.  How do I make safari active again?

    1. Finder > Applications > Safari
       Try launching Safari from Application folder.
    2. If this doesn't help, reinstall OS X.

  • Safari is not connecting me to the internet

    Safari is not connecting me to the internet.  Any idea why?

    It could be any number of things ranging from your ISP's DNS settings, the router being out of date or in need of replacement, a simple software update, the modem, high Wi-Fi traffic in your neighborhood etc or maybe you have a corrupt cache and need to restart in Safe Mode which is where I'd start.

  • I frequently get the messages "windows couldn't sign you out" (I am signed out) ,"not connected to in the internet" with prompts to sign in again (I don't) and "you're currently working offline", with a prompt to connect to my own locked wireless. None of

    I frequently get the messages "windows couldn't sign you out" (I am signed out) ,"not connected to in the internet" with prompts to sign in again (I don't) and "you're currently working offline", with a prompt to connect to my own locked wireless. None of these statements are true and I ignore the prompts (although my husband did re-sign on to our router once). I find that if I unplug the phone line and then plug it in again, it works. Strange. Is someone trying to get my password?
    == This happened ==
    A few times a week
    == when we had internet installed by comcast

    Try Settings > General > Reset > Reset Network Settings.
    Read this:
    http://support.apple.com/kb/TS4008

  • TS1424 Message I get (can not connect iTunes store) help me please

    I can not connect to iTunes store ,I need to upgrade lots of programs

    Is this on your iPad, iTunes your computer, or another device ? If on your iPad then can you connect to the internet in other apps e.g. Safari ? If you can then try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • My iPod was stolen last week. Its offline, not connected to internet and I don't know what to do! And I can't connect it to the internet to find it because, once again, it was stolen! Please help!

    I got this for Christmas and its one of the only convient ways to communicate with my aunt who is currently living in another country! Someone stole it and its not connected to wifi or online. This happened last week and I just got it 2 weeks ago but I didn't know what to do then...I never installed any app for tracking or anything like that and I can't afford a new one! Even with the discount! Someone please help me.

    Sorry, but if you didn't set up Find My iPod, and/or the iPod is not turned on or otherwise connected to the Internet, there's no way to track it nor affect it in any way. Notify the police and change the password to your Apple ID and any other applicable online services.
    Regards.

  • Can not connect to printer and internet at the same time

    I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
    I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

    The only way to print and use the internet (or university network) at the same time is to do one of the following:
    (1) Connect the printer via USB to your computer.
    (2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
    The AEBS can NOT wirelessly join the network.

  • My airport network will not connect to to the internet via my modem. My host computer is a hp running windows xp. I have had great connection for 3 years. Then suddenly can not connect. Please can you assist

    My airport will not connect to the internet via my modem. Worked for 3 years. Suddenly stopped. Main host computer is hp running windows xp.
    When trying to connect windows states connection was cancelled. I have had hp checked by compputer repair and still have same problem?

    The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
    Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
    Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
    If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

  • My old computer crashed completly. I have a new computer now. It is a HP with internet 8 on it. I downloaded itunes but can not sync itunes to the new computer. Every time I try I get a warning that if i proceed then all my stuff on the phone will erased.

    I recently bought a new computer becouse my old computer crashed. Now I can not sync my itunes account. I get an error when I try. It says that itunes will erase my phone content and replace with what is on the phone. I do not want to lose all my stuff so what do I do?

    This is how it works.
    Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    Copy everything from your backup copy of your old computer to your new one.

  • HT3971 I can not buy gam in the game clash of clans says can not connect itunes store

    please help me ..

    Hi baroofromelcajon,
    You do not mention what you are trying to use to connect to the iTunes store, but if it is a PC troubleshoot using this article -
    iTunes for Windows: iTunes Store connection troubleshooting
    http://support.apple.com/kb/HT1527
    For a Mac use this one -
    iTunes 11 for Mac: If you have trouble using the iTunes Store
    http://support.apple.com/kb/PH12305
    And from an iOS device use this one -
    iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch
    http://support.apple.com/kb/HT1491
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • TS3297 Having trouble connecting iTunes to the internet

    After two days of troubleshooting and following every relevant article in the iTunes support forum, I still cannot get the newest version of iTunes to connect to the internet.  All other internet-abled devices on my network can connect so it's not the network, just iTunes on this machine.  Have run diagnostic test after diagnostic test, reset firewall permsisions and flushed the DNS.  I am so frustrated!  Any guidance would be welcome.

    My guess is that there is a firewall configured in the router.  When that happens, the results are weird.  Laptops ar not affected but iPads are.  You need administrative access to the router.  Look for presence of a firewall.  If one is there, turn it off and test.  If that cures the problem, turn the firewall back on but weaken it a notch and test again.  You want the firewall to be as strong as possible without blocking iPad web access.

  • Can not connect iTunes Store message

    Hi,
    İ bought my iPad from US and it's sync. to Turkey conditions by itself. İt's been just 1 months, so i iTunes store gives a Message which says " can't connect to Store" and just one option, you need to pick "OK" button. on my user manuel says iTunes store not aplicable in many countries, not many more,
    how can i change my iTunes Store settings? Or may i use iTunes Store from Turkey?
    Thanks,

    Is this on your iPad, iTunes your computer, or another device ? If on your iPad then can you connect to the internet in other apps e.g. Safari ? If you can then try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • Can not view video over the Internet on WVC80N

    I set up the web cam, set up the port forward etc so now I am able to:
       1. view/change web cam settings inside my home network.
       2. view video inside my home network.
       3. view/change web cam settings over the Internet.
    But I am not able to view video over Internet. Every time I did so (using IE browser), after clicking the view video button, I got an error : There are too many user connections or the device is busy, please try again latter.
    Anyone has a fix on this? I set up port forwarding on port 1024 (that's how I can chage settings over Internet).
    I spent 2 hours on the phone with Linksys tech support but they could not find the reason.
    Thanks,
    Sam

    Who is your ISP? How you are trying to access your Camera from the remote location? Along with Port 1024 you need to do port forwarding for port 80 on your router for the Cameras IP address. As WVC80N works on your HTTP Port.
    To access your camera from the Remote location, you need to use http://wan ip:80.

Maybe you are looking for

  • Need Help With Sync problesm Log File Below Thanks

    Win XP Palm Desktop latest ver DL two days ago and installed Treo 755P HotSync operation started for TerryCano on 01/06/09 10:33:20 Quick Install - Sync configured to Do Nothing. OK Memos Calendar synchronization failed Contacts synchronization faile

  • TS3694 Error message in App Store saying "Can not connect to iTunes Store"?

    Just started using my iPad 3 that I just recieved for my birthday a few days ago. Last night went to download a new App from the App store, which was free. After hitting the "free" button and continuing on and hitting the "download App" button I rece

  • What app plays audio previews in Finder

    When I'm in column view in Finder I can play any audio file right from Finder without actually opening the file or any application. So what app is used to play these audio files?

  • Links to images not working when saving to JAR

    Hi Okay Ive created a Java GUI app with Eclipse and it all works fine until I try to save it to JAR. Basically the images don't load. grassIcon = new ImageIcon("images/grass.jpg"); antIcon = new ImageIcon("images/ant.jpg"); lionIcon = new ImageIcon("

  • Problems with reinstalling Office 2010 for windows 7

    So, I had Office 2010 installed on my PC. Then for some problems with other programs, I had to format my PC. Then, I opened Microsoft Office 2010 to reinstall it, then I inserted the product key I've written on a sheet, and it gave me error: the prod