Capture the log of RFBIBL00 after submit
When doing SUBMIT RFBIBL00 with DS_NAME = DIRECTORY
if in the flat file of Directory there is a worng posting key the RFBIBL00 terminate
with message "editing was terminated"
If this error message occur when submiting the RFBIBLOO
i need to find a way to retreive the message error since if this error message occur the processing is different
in the RFBIBLOO i search for memory id where i can retreive the message but there is non. In fact it is calling FM MSG LOG i think
Has anybody been in this situation before
Hello,
Try this,
DATA y_list_tab TYPE TABLE OF abaplist.
SUBMIT rfbibl00 WITH callmode EQ y_k_b
WITH ds_name EQ y_v_outfilename
WITH fl_check EQ y_k_keep
WITH XLOG EQ y_k_keep
EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = y_list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
TABLES
listobject = y_list_tab.
ENDIF.
Similar Messages
-
After my routine software update to 10.7.5, I can't log into my main log-in id. Whenever I put my password in, it takes me back to the log-in screen. I'm sure of the password not being wrong because i can access my other admin accounts from which i changed the password. All my files and data is in that id. Please help. Thank you.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/ -
Capturing the LOG OFF url click action in a Webdynpro application
Hi,
I have this requirement where I need to know when the User logs off in a webdynpro application.
I have several webdynpro applications, each independent, and each need to do some clean up tasks when the user clicks on the LOG OFF url in the portal login.
Is there some standard event attached with the LOG OFF Url of the portal login?
And could anybody please specify when exactly would the <i>wdDoExit()</i> method of the application view(s) or the application component controller get's trigerred when the application is run from the portal login?
Thanks in Advance.
Regards,
Swapna Priya.Hi Luciano,
I was successfully able to call the RFC from wdDoExit() method of the component controller.
Also I could successfully place a custom alert call when the user clicks on the LOGOFFurl in the portal browser.
Now I have one more pending requirement for me to completely use this cycle of events.....The Portal Browser close action i.e., 'X' action.
I did find a forum link with some code for the same but i did not understand where to place that code and have already raised a reply for hte same.
Below is the link:
/message/230174#230174 [original link is broken]
Do you have any idea about how to trap this?
Thanks for all your support
Regards,
Swapna Priya. -
How to capture the logged in user in SBO
Hi All
How can i capture which user is logged in sbo in that particular instance. Is there any possibility?
ThaHi,
Try this one
Dim SBO_Application As SAPbouiCOM.Application
Dim strSBOUserName As String
strSBOUserName = SBO_Application.Company.UserName
Regards
Arun TB
Edited by: aruntb on May 20, 2010 4:53 PM -
Logged Timecode Changes after Batch Capture
I'm working with the Kona 3 and the Panasonic D5 (HD3700B)
I'm having a problem with FCP changing my logged clip TC after Batch Capture in 720p 59.94. This problem only occurs in 720p mode, 1080i is just fine.
While capturing 720p 59.94 from the D5
In FCP when I log a clip at:
01:20:00:00 in
01:20:30:00 out
After Batch Capture is complete the clip shows up in the browser as:
01:19:55:05 in
01:20:25:05 out
FCP is effectively changing the logged timecode of the clip. I'm capturing with burned in TC and the Burned in TC is Frame accurate, but why is FCP changing the clip's TC?
In all my experience with FCP I have never encountered this issue and I am completely puzzled. I've contacted AJA and they have said that they do not know of this issue and were puzzled also. I am using a Tri-Level Sync and everything seems to be getting proper reference.
There is no reason why FCP should be changing my logged clip settings. (right?) Also, I tried a test where I made the clip that came in with the bad timecode offline, and then ran a Batch Capture again, and it changes the logged timecode even further. I've tried a variety of Device Control settings playing with frame offset etc with all having the exact same numeric result (see TC above).
Anyone who has any insight or similar experience your thoughts are greatly appreciated. Thanks for the help
Ted - Editor, NYCThe BITC matches the original Logged TC (even though the logged TC changes after capture)
Logged TC (Media Start/End in FCP)
01:20:00:00, 01:20:30:00
Captured TC (Media Start/End in FCP)
01:19:25:05, 01:20:25:05
Burned in TC Captured (Viewable on Video File)
01:20:00:00, 01:20:00:00
I'm very curious about what yourlooking at on the deck manual. Page 145??? I don't see a page 145. It's been my understanding that the Monitor HD-SDI does produce the 720p 59.94 signal, and that's what all my monitors and Kona say that their getting.
Also, could you clarify your last sentence.
*"Forgive my guessing but this deck looks like it really wants to work in 1080 and 720 is kind of there to step up from 8 bit DVCPro HD."*
I dont think that its a 23.98 issue and our source tape is not 23.98, even still if it was, it shouldn't effect the logged TC.... but I'll try it in the morning, could'nt hurt.
Update: A person over the phone at Apple "didn't" (did) say over the phone that upgrading to 5.1 (universal) would improve 720p capabilities.
So the next step will be giving more money to Apple for Universal and installing the new Kona drivers released yesterday.....and then let the testing fun begin again.
Thanks so much for your help, please let me know where to find that info in the D5 (3700B) manual. Cheers. -
On my iPhone 4, the Facebook app won't let me sign on with my account. I can sign on to another account just fine. The first time I sign on with the FB app it goes to the news feed page, says loading, and then flipps between loading and connection error. If I close out of that and try to sign in again it locks up on the logging in page. From Safari or google it goes to the log in page, after entering my email and password it goes right back to the log in page. I have tried resetting my phone, deleting and re-installing the app and everything else I can think of. Since I can log onto another account on my phone it can't be the app, any ideas would be greatly appreciated! Thanks
Sounds like a hard reset is in order...
-
Warning Capture in Log file using SSIS 2008
While doing insert from datasource1 (flat file/ xml source) to datasource2(Oledb) , some data is getting truncated . The User want to capture the log in some log file.
The field which got truncated along with the row details
and number of truncation which has occured.
I observe in flat file source we Redirect Row for Error and Truncation, but how to capture which row got truncated
and what value got truncated.
and it need to written in notepad/txt fileThe User wan't to insert length of specific character and discard the rest. I think redirect rows transfer the failed row so we won't have records inserted into the target db.
could you please suggest how to achieve the requirement. -
DMIS 2010 SP10 replication is not clearing the logging table
Hello,
We have installed the DMIS2010 SP10 on our test environment and for some table the replication is getting extreme slow. Initially I had a case when I started to load a new table and all the logs collected during the initial load was not processed after the load turned into replication. Every new entries to the table were replicated to HANA but the entries which were created during the initial load were still in the logging table.
After a while some other table got this issue, entries got left in the logging table and no replication done to HANA for those lines.
In the ltro I see really high latency for these tables where the replication is not ok.
Did anybody had similar issue?
OSS is opened, but no reply yet from SAP, so any help would be appreciated.
Thanks for any advice
TamasHi Tobias,
we need to upgrade the ECC kernel to be able to use DMIS2011 and that is not possible at the moment due to other dependencies. I requested our basis team to review the notes, maybe they missed to install any.
BR
Tamas -
Active monitoring logs randomly clearing after CU5
After performing the Exchange 2013 update to CU5, we have been noticing that some of the active monitoring logs are randomly clearing. Specifically the Throttling Config, Responder Definition, Monitor Definition, Probe Definition, and Maintenance
Definition logs. The only correlation I can find is in the Startup Notification logs I see an event every time the logs are cleared starting the Local endpoint manager. I looked back prior to CU5 and this event occurred infrequently, and accompanied by a handful
of other startup events, now it seems to be running by itself intermittently. It isn't happening at any consistent time or date range. Sometimes we will have 2 in one day, other times it will wait 2 or 3 days to clear. Default behavior even if the log
is full would be to overwrite old logs rather than perform a log clear, but I'm looking at the log and even after a full days worth there's barely 100 events in any given log. I reviewed the logs and there's no indication of trouble, no
errors or warnings. Is anyone else seeing this behavior on exchange?Hi Theantioch,
From the release notification of Exchange Server 2013 CU5, CU5 includes a Managed Availability probe configuration that is frequently restarting the Microsoft Exchange Shared Cache Service in some environments. The service is being added to provide
future performance improvements and is not used in Cumulative Update 5. More information is available in
KB2971467. As of Exchange Server 2013 Cumulative Update 5, this notice and the frequent restarts of the managed availability process are
considered not to be a concern. Our issue could be related to the frequent restart. And we can safely ignore the problem. Thanks for your understanding.
Regards, Eric Zou -
Clip is not logged after pushing the log button on the capture window!!
After entering all info I push the log button, the small log window opens and after pushing ok the logged clip does not appear on the browser at all.
Hi -
If you press the large oval Log Bin button, it will bring the bin forward so that it on top of the logging window.
!http://www.spotsbeforeyoureyes.com/LoggingBinDestination.jpg!
If you press it and still don't see a bin containing your clips, you may want to consider trashing your preferences -
http://www.digitalrebellion.com/pref_man.htm
MtD -
I have been capturing 24p footage from the DVX100a and the log & capture feature has been working fine, until after the print to video feature was used. Now the device control works, but it will only display color bars. I have checked and rechecked the audio/video settings, as well as user preferences. Am I missing something simple?
? Am I missing something simple? < </div>
Probably but it's impossible to tell from here. Search the forum for your camera model and for preview disabled. We get at least one post a day on these topics. I don't follow the threads, I just see them all the time.
Try shutting down your system, disconnect the FW stuff, restart. Usually resets the FW bus. But there are many cameras out there now that tend to drop in and out of the preview window.
bogiesan -
When I turn on my iMac it comes up with the login icons which I then choose and log into. The password works and I then get the apple icon and the spinning wheel. After about a minute the Apple icon turns into a prohibited icon. However, if I log in under the guest icon, I can access the wifi and get to Safari. I really don't know what to do next. Any help would be gratefully appreciated.
Are you running any A-V? If it's an iMac 21.5, I don't think you're running Leopard, 10.5. Probably at least Snow Leopard, 10.6. This is the Leopard forum.
This article says meant for 10.3.9 and eariler, but contains some still useful suggestions.
http://support.apple.com/kb/TS1411
Try a Safe Boot. Shift at the startup chime and expect a much longer time to boot. This will bring you to a login screen with "Safe Boot" in red.
Look at this as well.
http://support.apple.com/kb/TS1417 -
Is it possible to resize the log and capture window?
Hi,
Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps.
For a good overview of what I'm capturing at the moment, I would love to have a bigger capture window. For all I know, FC pro doesn't support the resizing of the log and capture window. Anyone an idea on how to solve this?
Thank you.In my case, the capture window is adjustable if I am capturing SD (DVCAM) video. I can also use the scopes in this case. (Good if you are recording to disk, or using a laptop for monitoring.)
However, both features (adjustable capture window and scopes) are not available if capturing HD (HDV in my case) video.
Message was edited by: amarasme -
How to capture the user who has logged into the portal.
Hi,
How do I capture the user who has logged into the portal.
HOw do I retrieve the first name and last name of the logged in username.
Could someone provide me a related link or PDF to work on this.
Thanks,
SuvarnaHi suvarna,
Check the following code
ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
IUserFactory usf = UMFactory.getUserFactory();
IUser iuser = null;
IUserListElement userElement = null;
int i = 0;
while (rst.hasNext()) {
iuser =
UMFactory.getUserFactory().getUser(rst.next().toString());
String email = iuser.getEmail();
String fname = iuser.getFirstName();
String lname = iuser.getLastName();
regards
Anil Dichpally -
Help! Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week and the shop didn't update it back to Mavricks which I had previously done...and now my Mac won't let me past the log in screen even with correct password entered. It just spins like I'm logging in and then goes back to the user log in screen. I did the process where I restarted and pressed control S and created a new user and password, but once created same issue and can't get passed that screen.
Super frustrated and any help is appreciated!I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.
Maybe you are looking for
-
Internal table not getting modified from Table Control
Hi Guys, I am developing a <b>Module Pool </b>Program where I am inserting data directly in table control of the main screen. In the flow logic of the Table control I have written : PROCESS BEFORE OUTPUT. LOOP AT itab WITH CONTROL tc1 CURSOR tc1-cu
-
When I log into facebook it takes me to the https version and not http. the https version is secure and when you play a game it will ask if you want to termporarily turn the secure feature off. When I do I consistantly get a message that says they (I
-
Issues with Search Filter Criteria Button in Search Help
Hi , I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of
-
Find my Friends. Shared Apple ID. His and her iPhones.
My wife and I each have iPhones. We share an Apple ID. Can we use Find my friends if we share the same Apple ID? thanks, eli
-
White balance option for stl 001
Hi Guys My z10 - stl 001 missing White balance option.This option to fix white color on screen of Z10 How to fix this problem OS 10.3 have this option for stl 001 ? Thanks