Cisco CallManager RisPort Problem

Hi All,
In my company we are upgrading Cisco CallManager 4.1 to 5.0,In ccm5.0 How to get the Real Time Information(like Ip address of the Phone). iam using SOAP to interact with CCM 5.0 if anybody worked on this , please send me the sample code for this it is very useful for me
Thanks in advanced
Regards,
Ravindra
my personal mail id:[email protected]

Create the CDR database manually by following the steps below:
Go to Start --> Microsoft SQL --> sql query analyser
Click on file -- open --- goto c:\program files\cisco\bin\ ---- select CDR --- click open and execute the sql query
Then try to install CAR again.
HTH
//Jorge

Similar Messages

  • Maintaining the Directory in Cisco CallManager Attendant console

    I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

    Hi,
    Thanks for the doc..4* for the info.
    This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
    1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
    2) Re-start the TCD service again.
    3) Shut down the AC client and re-open it.
    This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
    Please rate useful posts...

  • Cisco Callmanager Amtskopfanzeige

    Hallo zusammen
    wir haben ein kleines Problem in unserer Telefonanlage und zwar...
    Bei ankommenden Anrufen per Handy werden ja 2 Nullen von der Telefonanlage vorne angehängt.
    Wenn jetzt Handys mit Amtskopfanzeige (Rufnummer Anzeige bei Weiterleitung – Telekom option) auf einem Telefon(mit Weiterleitung auf Handy) anrufen, werden diese 2 Nullen noch angehängt.
    Siehe hier:
    0151xxxxx -> 089xxxxxxx (Weiterleitung -> 0175xxxxx)   =    +49 (0) 0175xxxxxx (am Handy)
    Somit wird die Nummer falsch angezeigt und kann auch nicht zurück gerufen werden.
    Cisco Callmanager
    System version: 6.0.1.2000-3
    Habe auch schon ein paar Sachen in den Routepattern probiert aber ich komme irgendwie nicht weiter.
    Vielen Dank und Gruß
    Harald

    Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

  • Cisco CallManager 4.1

    Hello.
    I am sorry for bad English. At me such question:
    As in "Cisco CallManager 4.1" in "Device Defaults Configuration" to add phone support cisco 7925
    By default such support is not present, it is possible to look a picture in an investment.
    Thanks

    Greetings.
    Yes, on tftp all is good, all files for an insertion 7925 are present. Here the list of files: CP7925G-1.3.2.LOADS, TNUXH-1.3.2.SBN, TNUXRH-1.3.2.SBN, SYSH-1.3.2.SBN, WLANH-1.3.2.SBN, APPSH-1.3.2.SBN, GUIH-1.3.2.SBN.
    In adjustment «Device Defaults Configuration» under cisco 7921 has substituted file CP7925G-1.3.2.LOADS, does not work, on phone the message «failure of updating of microprocessor maintenance» stands out
    And devices cisco 7921 at reboot begin перепрошиваться under 7925 but too there is an error.
    While leaves nothing!!!.
    Like all I do correctly.

  • Cisco CallManager 5.x Service Parameters

    Nothing shows in Cisco CallManager Service Parameters when a service is selected (CM, Attendant Console, etc.). Has anyone seen this before?

    Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

  • Cisco CallManager Installation

    As new in Voice Networks, I have a question ! Is Cisco CallManager Solution must be installed on designated / cisco recomended hardware. I want to try it before going a head with buying stuff. Can i install it on my server machines with Windows 2000 Server ??
    If any one was successfull please let me know.
    thanks,
    Shakeel

    This is how to get CallManager 4.1.3 running on non-MCS server.
    1. Install Windows 2000 server (15 gig partition). Make all passwords the same, including WIN2K account. (I used " cisco" )
    2. Keep all the default installation components,
    just add DHCP under ‘Network Services’,
    and SNMP under ‘Management and Monitoring tools’.
    3. Assign a static IP.
    4. If installing in VMware, install VMware tools (under the main VM tab ) .
    5. Install SP3 (at-least). (or make an win200 boot CD yourself with slipstream( google: XP slipstream)
    6. Setup DHCP scope and options, don't forget to add the CISCO TFTP option 150
    7. Copy the text below into a text file and name it with a .reg extension,
    double click this file to make the changes to the registry.
    7a) ccmreg1.reg
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
    "Hardware"="MCS7825H02"
    "Speed"="2268"
    "Memory"="2048"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
    "Version"="2000.2.6"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Service Release]
    "Version"="2000.2.6sr5"
    7b) install win-OS-Upgrade-K9.2000-2-7.exe
    7c) ccmreg2.reg
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
    "Hardware"="MCS7825H02"
    "Speed"="2268"
    "Memory"="2048"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Spirian]
    "ProductKey"="BTOOVQESCCJUIEBI"
    "Deployed"="0000000000000000"
    8. copy c:\program\cisco\updates\2000 2.7sr5\shutdown.exe naar c:\utils
    9. Install CallManager 4.1(3)
    ccmsetup.exe
    10. Go to Start >> Programs >> CCM 4 >> CallManager Administration and IE will open.
    11. Go To Menu >> Application >> CCM Serviceability >> Tools >> Service Activation.
    >>Click> on server u want to configure on left hand side.
    >>Click> "Cisco RIS Data Collector" and press update.
    >>Click> on all the services one by one and press update.
    12. You should now have CallManager 4.1(3) running.
    13. Upgrade OS and CCM with all patches if needed.
    14 you can use P2V to make an copy of an working CM to a VMware machine

  • Cisco Callmanager Version 9.X on Custom Made Server

    Hi Cisco
    May i know can we install Cisco Callmanager version 9.X on custom made server? i plan to buy one of custom made server from third party with free dos.
    Then i want to buy cisco callmanager version 9.x software to install on the custom made server. Is it possible?
    Since Cisco camoe out with UCS server all the callmanager was install with vmware platform. Is it possible i install the callmanager version 9.x into custom made server with free dos.
    Then i install the callmanager version 9.X into the custom made server.

    UCS are only for virtualised applications, they are different from the old appliance based MCS servers. You'll need to buy UCS server, VMware licenses etc.
    You can look into Cisco BE6k for that many users. BE6k is basically a UCS C220 server (other than small which is UCS E160D blade server) that comes as a bundled solution, with pre-installed VMware, pre-loaded software (CUCM, CUC, UCCX etc. install media) and normally a starter 25 licenses (you can buy additional add-on licenses as per need) so review the BE6K and see if that fits your needs. It comes in small, medium etc. different capacities.
    I would also recommend installing the latest version of CUCM which is 10.5, if you have no particular reason to stick to 9.1.
    Ref: http://www.cisco.com/c/en/us/products/collateral/unified-communications/business-edition-6000/data_sheet_c78-717454.html
    Please do rate all helpful posts and mark the thread as answered if you have no other queries.
    -Terry

  • RisPort problems - argument type mismatch

    Hi!
    I'm trying to get a list of devices via RisPort. I copied example from http://www.cisco.com/univercd/cc/td/doc/product/voice/vpdd/cdd/5_0/ccmdev/ccmdvch2.htm chapter Real-Time Information (RisPort)
    Selecting Cisco Unified CallManager Real-Time Information , but service returning following xml:
    <?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server.userException</faultcode><faultstring>java.lang.IllegalArgumentException: argument type mismatch</faultstring><detail><ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">CUCM6</ns1:hostname></detail></soapenv:Fault></soapenv:Body></soapenv:Envelope>
    And my question is: How can I recognize, which argument? There are no any notes or details :-(
    Many thanks for your ideas!!
    ps. or is it posible to get that list any other way? (CUM6)

    check your gmail~i sent my code to your email!
    here is the xml String:
    String strSoapMsg="<?xml version=\"1.0\" encoding=\"utf-8\"?>"+
    "http://schemas.xmlsoap.org/soap/envelope/\" "+
    "xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" "+
    "xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\">"+
    ""+
    "http://schemas.xmlsoap.org/soap/encoding/\">"+
    ""+
    ""+
    ""+
    "http://schemas.xmlsoap.org/soap/encoding/\" "+
    "xsi:type=\"ns1:CmSelectionCriteria\" xmlns:soapenc=\"http://schemas.xmlsoap.org/soap/encoding/\" "+
    "xmlns:ns1=\"tns:CmSelectionCriteria\">"+
    "2000"+
    ""+
    "Name"+
    ""+
    ""+
    ""+
    ""+

  • AT&T DSL & Cisco ASA 5505 Problems

    Okay I have been working with a 5505 for two days and finally got it configured and working on an AT&T DSL Modem then when I took the 5505 to the clients office and connected/configured it to their AT&T DSL with their IPs the whole thing quite working. I noticed walk through the Tech discussions that there are lots of problems with AT&T DSL deployments and I also discovered that one working configuration was attached to a DSL in AT&Ts standard deployment as a DHCP router using dynamic IPs while the second is in bridge mode using static IPs.
    So here's the question why won't the DSL Modem in bridge mode not work as a typical Internet connection like a Cable Modem? I have a Cisco Wireless VPN 4400 to it in bridge mode using static IPs and it works great and on the 4400 there are no special PPPoe settings that have to be set just standard IPs, DNSs, Gateways, Masks...
    I see in the Cisco Tech Notes that it is recommended/mandatory to configure Vpdn groups and the Vlan2 to take into account the PPPoe configuration of the AT&T DSL Modem but if the DSL modem is already set in bridge mode and is handling the PPPoe authentication why does the 5505 have do it again this see,s redundant. Will try to use the example configuration additions above and post here with the results.
    BTW the configuration with the DSL set as DHCP Router works without any special PPPoe configs.
    Very puzzling this DSL configuration conundrum... Last point for businesses if you can use Cable or nonDSL ISP you should do so this AT&T stuff is for the birds... Angry Birds...
    Thanks for the assistance in advance!!!
    If static ip address:
    vpdn group INTERNET request dialout pppoe
    vpdn group INTERNET ppp authentication {chap|mschap|pap}
    vpdn group INTERNET localname setroute
    pppoe client vpdn group INTERNET
    mtu outside 1492
    Sent from Cisco Technical Support iPad App

    Hi Ferdinand. I don't know what a Smartnet contract is. How do I know if we have one? This ASA basically hasn't been touched for 5 years. Almost the entire staff has rotated through this company since then and nobody knowns anything. I found the invoice for it this morning after accounts searched for it, but it appears to have been purchased from a non services retailer. I contacted them and while they confirm they sold it to us they know nothing about it. They don't offer service. 
    What are my options?

  • Sype connect Cisco UC520 authentication problem

    hi, 
    i havce configurated a skype connect account with credit and a sip profile. I have it configurated in my pbx cisco uc-520 but  dont works....
    skype page account said "El usuario de SIP no está registrado aún en sip.skype.com" and the log of my pbx said the same.
    i have a static nat ( bridging) with a dedicated public ip address. 
    i think is a problem with the configuration.
    please i need help
    thanks a lot
    Roman

    rwelsch wrote:
    hi, 
    i havce configurated a skype connect account with credit and a sip profile. I have it configurated in my pbx cisco uc-520 but  dont works....
    skype page account said "El usuario de SIP no está registrado aún en sip.skype.com" and the log of my pbx said the same.
    i have a static nat ( bridging) with a dedicated public ip address. 
    i think is a problem with the configuration.
    please i need help
    thanks a lot
    Roman
    If I understand your issue correctly, you are using User Registration and are unable to register your Cisco UC-520.
    Please verify that the following settings are correct in your PBX:
    Proxy Server (primary): sip.skype.com
    Registrar Server: sip.skype.com 
    Digest Authentication:  SIP User (99051000XXX)& password from Skype Connect sip profile.
    Note, if you cut and  paste the password, sometimes a space gets added to the field. If this happens registration will fail.
    Hope this helps.
    GaryB
    Skype Enterprise Support

  • Cisco callmanager config- Reg

    Hi,
    I have configured the Cisco 2821 Router with call manager express 4.2 (with PRI Voice)
    I have a problem two problem now.
    1. when i called from out side to this PRI line. It takes more time to ring the extensions
    2.It has totally 7 digit number (XXXXYYY). When i dial the first 4 digit, i get the encage tone from out side. So our customer feel that , this line is dead.
    Please give some idea to resolve this problem.
    Have a nice day...
    Regards,
    Sampathkumar.R

    Hi Sampathkumar.R,
    Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
    Regards,
    Cindy Toy
    Cisco Small Business Support
    Community Manager

  • Cisco vpn connect problem with 3g dongle

    Hi,
    I am trying to connect cisco vpn but every time i am getting following error while trying to connect from huawei 3g usb dongle in win8. for win7 it works fine with no issue. Also the problem is only form datacard, form lan and wireless interaface i can easily connect to vpn without any issue. Any help/idea/suggestion highly appreciated?
    Cisco Systems VPN Client Version 5.0.07.0440
    Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
    Client Type(s): Windows, WinNT
    Running on: 6.2.9200
    25     08:06:46.846  12/25/13  Sev=Info/4    CM/0x63100002
    Begin connection process
    26     08:06:46.848  12/25/13  Sev=Info/4    CM/0x63100004
    Establish secure connection
    27     08:06:46.848  12/25/13  Sev=Info/4    CM/0x63100024
    Attempt connection with server "116.68.208.113"
    28     08:06:46.849  12/25/13  Sev=Info/6    IKE/0x6300003B
    Attempting to establish a connection with 116.68.208.113.
    29     08:06:46.855  12/25/13  Sev=Info/4    IKE/0x63000001
    Starting IKE Phase 1 Negotiation
    30     08:06:46.858  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 116.68.208.113
    31     08:06:47.145  12/25/13  Sev=Info/4    IPSEC/0x63700008
    IPSec driver successfully started
    32     08:06:47.145  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    33     08:06:52.144  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    34     08:06:52.144  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    35     08:06:57.144  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    36     08:06:57.144  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    37     08:07:02.145  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    38     08:07:02.145  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    39     08:07:07.145  12/25/13  Sev=Info/4    IKE/0x63000017
    Marking IKE SA for deletion  (I_Cookie=97205EA6A12866F0 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
    40     08:07:07.645  12/25/13  Sev=Info/4    IKE/0x6300004B
    Discarding IKE SA negotiation (I_Cookie=97205EA6A12866F0 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
    41     08:07:07.645  12/25/13  Sev=Info/4    CM/0x63100014
    Unable to establish Phase 1 SA with server "116.68.208.113" because of "DEL_REASON_PEER_NOT_RESPONDING"
    42     08:07:07.645  12/25/13  Sev=Info/5    CM/0x63100025
    Initializing CVPNDrv
    43     08:07:07.645  12/25/13  Sev=Info/6    CM/0x63100046
    Set tunnel established flag in registry to 0.
    44     08:07:07.645  12/25/13  Sev=Info/4    IKE/0x63000001
    IKE received signal to terminate VPN connection
    45     08:07:08.146  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    46     08:07:08.146  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    47     08:07:08.146  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    48     08:07:08.146  12/25/13  Sev=Info/4    IPSEC/0x6370000A
    IPSec driver successfully stopped
    49     08:19:59.202  12/25/13  Sev=Info/4    CM/0x63100002
    Begin connection process
    50     08:19:59.202  12/25/13  Sev=Info/4    CM/0x63100004
    Establish secure connection
    51     08:19:59.202  12/25/13  Sev=Info/4    CM/0x63100024
    Attempt connection with server "116.68.208.113"
    52     08:19:59.202  12/25/13  Sev=Info/6    IKE/0x6300003B
    Attempting to establish a connection with 116.68.208.113.
    53     08:19:59.202  12/25/13  Sev=Info/4    IKE/0x63000001
    Starting IKE Phase 1 Negotiation
    54     08:19:59.218  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 116.68.208.113
    55     08:19:59.656  12/25/13  Sev=Info/4    IPSEC/0x63700008
    IPSec driver successfully started
    56     08:19:59.656  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    57     08:20:04.656  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    58     08:20:04.656  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    59     08:20:09.656  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    60     08:20:09.656  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    61     08:20:14.656  12/25/13  Sev=Info/4    IKE/0x63000021
    Retransmitting last packet!
    62     08:20:14.656  12/25/13  Sev=Info/4    IKE/0x63000013
    SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
    63     08:20:19.656  12/25/13  Sev=Info/4    IKE/0x63000017
    Marking IKE SA for deletion  (I_Cookie=46B8917FD54C64AC R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
    64     08:20:20.156  12/25/13  Sev=Info/4    IKE/0x6300004B
    Discarding IKE SA negotiation (I_Cookie=46B8917FD54C64AC R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
    65     08:20:20.156  12/25/13  Sev=Info/4    CM/0x63100014
    Unable to establish Phase 1 SA with server "116.68.208.113" because of "DEL_REASON_PEER_NOT_RESPONDING"
    66     08:20:20.156  12/25/13  Sev=Info/5    CM/0x63100025
    Initializing CVPNDrv
    67     08:20:20.156  12/25/13  Sev=Info/6    CM/0x63100046
    Set tunnel established flag in registry to 0.
    68     08:20:20.156  12/25/13  Sev=Info/4    IKE/0x63000001
    IKE received signal to terminate VPN connection
    69     08:20:20.156  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    70     08:20:20.156  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    71     08:20:20.156  12/25/13  Sev=Info/4    IPSEC/0x63700014
    Deleted all keys
    72     08:20:20.156  12/25/13  Sev=Info/4    IPSEC/0x6370000A
    IPSec driver successfully stopped

    Hi Karsten,
    Thank you for the reply !!! & best wishes for the new year 2014.
    The problem is like this, if i select datacard connection type to NDIS it works but it doesnt work when i select RAS(modem) connection type for 3G datacard it doesnt. (NDIS and RAS(Modem) connection types are the 2 modes currently supporetd by the datacard.). Is there any case the users are experiencing from the similar problem? and what they have done to solve the issues? And thank you for the workaroung, i have checked the shrew-soft with win7 and it was working fine but not on win8, i will check shrew-soft on win8 very soon. Also we can move to the anyconnect solution but just want to know if this can solve our problem or not? whether there will be any issues with anyconnect solution for win 8 or not? can you please confim.
    Thank you

  • Cisco SPA112 provisioning problem: FXS_Port_Power_Limit

    Hi,
    We have problems provisioning specific parameter in a SPA112: FXS_Port_Power_Limit. Here is a part of our XML:
    <Force_G729a_Code ua="na">*02729</Force_G729a_Code>
    <FXS_Port_Power_Limit ua="na">4</FXS_Port_Power_Limit>
    <FXS_Port_Input_Gain ua="na">+2</FXS_Port_Input_Gain>
    <FXS_Port_Output_Gain ua="na">+2</FXS_Port_Output_Gain>
    The parameter "FXS_Port_Power_Limit" is not provisioning the XML parameter (in the example: 4). It keeps the default value (3). Other parameters in the same section like FXS_Port_Input_Gain and FXS_Port_Output_Gain gets the XML value correctly.
    Thanks for your advice,
    Alejandro.

    I looked at the spc file for this model and don't see that parameter.
    http://software.cisco.com/download/release.html?mdfid=283998771&softwareid=282562500&release=1.3.1&relind=AVAILABLE&rellifecycle=&reltype=latest

  • Cisco IP phone problem with external directory http error

    Hi,
    I have a problem when I try to open the directory on different model Cisco IP Phone for new deployment.
    In CUCM (version 8.5) we have configured internal and external directory and on each device set the "service provisioning" to "both". For all the sites configured in CUCM this feature is working properly, but not in the new deployed site. I´ve already verified the url is written properly.
    I get the following error messages for these different models:
    - Cisco IP phone 8945: "HTTP connection failed"
    - Cisco IP Comm: "HTTP error [500] "
    Thank you for your help,
    Regards,
    David Lozano             

    Hi David,
    What firmware are you using? Do you have 8945s on the other sites? I found a bug, but I'm not sure it applies to your description:
    CSCty58000 Bug Details
    8945 freezes when directories is pressed
    Symptom:
    8945 freezes when directories button is pressed.
    Conditions:
    This issue happens when the phone load is 9.2.3 and the directories URL doesn't contain port number.
    Workaround:
    Please use http://X.X.X.X:8080/ccmip/xmldirectory.jsp for the directories
    URL instead of http://X.X.X.X/ccmip/xmldirectory.jsp
    You can try upgrading to firmware 9.3(1)
    Regards,
    Tere.

  • Browser issues - Cisco CallManager GUI

    I'm new to the forum so firstly let me say hi!
    I recently got a new iPad 2, absolutly loving it. However I have one major issue.
    I am a cisco voip engineer, and aqs such I need to log into my CallManager servers through the browser for the GUI interface. Through safari, and many other browsers I have tested, I can connect, login and start to work.
    The issue I have is that only what is viewable on the screen is available, if the page being viewed is outside the current viewable screen area, those areas of the wb page are not available. There are no scroll bars on the side to scroll up and down on th web page.
    Has anyone else experinced anything like this before, if so is there a sollution to resolve this issue?
    I hoping this is not to much of a major probolem.
    Thanks in advance
    iCWS

    You should be able to scroll the screen in those areas if you use two fingers on the screen when swiping.

Maybe you are looking for