Convert SNP Orders to PPDS Orders in CIF

We have a requirement to segregate the orders created in SNP and scheduled in ECC.  I know this can be done with the Production Planned and Production Confirmed key figures based on ATP Category as EE is for SNP and AJ, AK, AL, AI are PPDS.  The complication is we are not using PPDS for short term scheduling; therefore ECC will control the short term scheduling.  We are currently removing the Firm indicator on ECC for any SNP (EE) order using a user exit.  This allows for seeing the SNP orders as not scheduled (not firmed) in ECC.  When the scheduler firms the planned order in ECC we want the order to show in the production confirmed key figure in SNP.  This can be done by setting the EE Firmed to the Production Confirmed key figure, but now the SNP Planner has SNP Orders on two different key figures.  Therefore, our requirement is to change any SNP order (EE Category) to a PPDS order if it is firmed.   This way Production Planned are SNP orders only and Production Confirmed are scheduled or created ECC orders.
We have tried using APOCF004 to change the APOAPPL from a 3 to a 1 and BADI ORDER_INB_MODIFY_AFTER_MERGE changing cs_ordkey-appli from 4 to 2.  Neither of these options worked.  Possibly because of the difference in structures and number range, the system is not doing the convert.
Thank you in advance for any suggestions.

Hi,
Please check the settings in the heuristics  SAP_SNP_SNGL(Individual Conversion SNP --> PP/DS) or SAP_SNP_MULT, whatever you are using.
PPDS horizon is relevent for the conversion and SNP horizon may not be relevant.
The details are as below:
The conversion horizon for SNP to PPDS is decided as below.
Conversion Hprizon
The offset and the PP/DS horizon together define the conversion horizon, that is, the period in which you want to convert Supply Network Planning (SNP) orders and Capable-To-Match Planning (CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders:
Conversion horizon = PP/DS horizon + offset
You must specify a positive value for the offset. The conversion horizon begins on today's date and continues for the relevant number of calendar days into the future. So that the system converts an SNP or CTM order into a PP/DS order, the start date/time of the order must be within the conversion horizon. If you want to extend the conversion horizon to the end of the SNP or CTM planning period in which the end of the conversion horizon lies, you enter a daily buckets profile.
Hope this helps.
Regards
Datta

Similar Messages

  • SNP orders to PPDS orders

    Dear Experts,
    The system appears to have converted a number of SNP orders to PPDS while retaining the SNP orders too.but the orders should not have been converted to PPDS although they are outside the SNP horizon.
    What could be the reason?
    Kindly suggest the way out.
    Regards,
    Srinivas.S

    Hi,
    Please check the settings in the heuristics  SAP_SNP_SNGL(Individual Conversion SNP --> PP/DS) or SAP_SNP_MULT, whatever you are using.
    PPDS horizon is relevent for the conversion and SNP horizon may not be relevant.
    The details are as below:
    The conversion horizon for SNP to PPDS is decided as below.
    Conversion Hprizon
    The offset and the PP/DS horizon together define the conversion horizon, that is, the period in which you want to convert Supply Network Planning (SNP) orders and Capable-To-Match Planning (CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders:
    Conversion horizon = PP/DS horizon + offset
    You must specify a positive value for the offset. The conversion horizon begins on today's date and continues for the relevant number of calendar days into the future. So that the system converts an SNP or CTM order into a PP/DS order, the start date/time of the order must be within the conversion horizon. If you want to extend the conversion horizon to the end of the SNP or CTM planning period in which the end of the conversion horizon lies, you enter a daily buckets profile.
    Hope this helps.
    Regards
    Datta

  • SNP to PPDS order conversion

    Hi,
    I am trying to do small testing over PP run in SAP APO.
    I have created everything manually in SAP APO(Product,location,No source of supply at Plant)
    When running SNP at plant getting planned order without source of supply.Now i am trying to convert the same order into PPDS order using program(indicator is set).
    Getting the below error:
    "In-house production 188401198 is not valid for the conversion"
    Any suggestion if this conversion is posible?
    Thanks,
    Krishna

    Hi Krishna,
    Yes you can create the order without source of supply by doing setting in Model/Planning Version Management  /SAPAPO/MVM but you cant use that for conversion.
    Go to SPRO---Supply Chain Planning----Production Planning and Detailed Scheduling (PP/DS)---Production Planning and Detailed Scheduling (PP/DS) here you will get the Heuristic Conversion SNP->PP/DS in that it is define Use SNP source of supply.
    Regards,
    R.Brahmankar

  • Error:conversion of PPDS order from SNP order-error /sapapo/rrp_heur45

    Hi,
    I am converting a snp planned order from ppds order in transaction /sapapo/rrp_sap2ppds and using heuristic sap_pp_002.But it is canceling the heuristic and giving above error message.I have given 60days ppds horizon and 61days snp horizon.lot size:lot-for-lot.Please suggest what to do?
    Thanks&regards
    venkadesh

    Hello ,
    The hueristics sap_pp_002 you are using is based on algorithm "planning of std. lots".
    For converting Supply Network Planning (SNP) orders or Capable-to-Match(CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders, try to  use a heuristic based on the algorithm /SAPAPO/HEU_SNP_CONVERT, such as the standard heuristic SAP_SNP_SNGL..
    I think the above mentioned hueristics should be able to solve the problem .
    Also for more information refer to below link.
    http://help.sap.com/saphelp_scm2007/helpdata/en/8a/475c3c3906b106e10000000a11402f/frameset.htm
    Thanks & Regards
    Abhijit S Nakhwa

  • SNP PPMs from PPDS PPM and  manually creating PPMs in SNP

    I am a new user to APO and have a small question. I will appreciate if you could help me out.
    We are implementing SNP, with plans to implement PPDS in the future.
    Could you please explain the difference between converting SNP PPMs from PPDS PPM or manually creating PPMs in SNP.
    Thank you

    Also try this: http://help.sap.com/saphelp_apo/helpdata/en/84/23cb390165ad0ce10000000a11402f/frameset.htm

  • SNP Planned Orders to ECC Process Orders - no PPDS

    Hello Gurus,
    Is there a way to covert an SNP Planned orders to ECC Prod. orders? Can one switch off the PPDS in APO and still get the MRP/ MPS planning in APO and  and convert those SNP planned orders into ECC orders in ECC
    Thanks.

    Hi Abhi,
    When you CIF SNP and PPDS planned orders to ECC system there is no diffrenciation between both of them (Because component specific details for the orders are not captured in ECC). So in ECC system you can convert Planned orders to Process or production orders by switching PPDS off in APO.
    In APO system, SNP itself can plan for all the levels (RM,PM,FG,SFG) so no need of doing MRP.So you can switch off PPDS.
    MPS functionality is available in ECC and not in APO system.
    Thanks and regards
    Sravan maturu

  • Converting SNP Planned Order /Purch Req to Prod.Order/Purch.Order

    Guys
    What is the standard process to Convert the SNP Planned Order /Purch Req. into a Prod.Order/Purch.Order ?
    Can the conversion indicator be set in APO for SNP Planned Order /Purch Req.and then transferred to R3 as Prod.Order/Purch.Order  or can the convesrion of Planned Order /Purch Req to Prod.Order/Purch.Order  can be done in R3 itself ?
    I am not clear on how exactly this works. Would appreicate if you could provide me with the standard process and any config involved in the same such as Number Ranges and how to set the conversion indicator automatically through SNP planning runs ?
    Thanks

    When you set this indicator for a planned order or a purchase
    requisition, the system automatically converts the order into a
    Production order or purchase order after the transfer to the
    connected SAP R/3 system.
    The converted orders are then retransferred to the SAP APO system with a
    different category; a purchase requisition with category BS-ANF becomes
    a purchase order delivery schedule line with category BS-EIN.
    Please check configuration setting in SPro for transfer setting to R/3.
    1. Configure Transfer to OLTP Systems(SNP)
    2.Maintain Global Parameters and Defaults(PPDS)
    Also on R/3 side you can see it in MD04/MD07 collectively for a product . or individually on
    MD13 : planned order
    MB51n: PR
    Manish

  • Should PPDS orders consume capacity in the SNP Capacity view in 9ASNP94?

    Dear Gurus
    Should PPDS orders consume capacity in the Capacity View in 9ASNP94?
    We currently only use PPDS, but are looking to implement SNP for mid-range planning and S&OP.  I would like to demonstrate the simplicity of the capacity view in SNP, but the planned orders in PPDS do not consume the capacity of the Resource in the standard planning book/view SNP94(2).  We are using Single mixed production resources which I thought were suitable for both PPDS and SNP planning.  This is a particular concern because I would expect that the SNP and PPDS horizons will have to cross over and so PPDS and SNP will have to take into account the capacity consumed by orders in the other module.
    Any help will be appreciated!
    Elamobel

    If you are using PDS you probably need this BADI:
    Note 657185 - RTO: Sample code for calculating bucket consumptions 4.0
    As standard only the continuous consumption is maintained in the PDS by the CIF, the bucket consumption (which is the SNP view of capacity) is missing.
    Check the related notes too (especially 1462965)
    If you are using PPMs you can just maintain the missing data directly

  • Fetch SNP and PPDS orders

    hi,
    I am new to APO. How to get PPDS and SNP planned orders from livecache.
    Regards
    Dhanu

    1)     I am able to get all SNP and PPDS order using BAPI called BAPI_PPDSSRVAPS_GET_IO_NODES from Live cache. This BAPI fetching order id as key field.
    2)     I need to fetch the data from DMCP table using this order id but there is no link with this order id with DMCP table.
    3)     There is a field called GUID in DMCP table. I used one FM to convert order ids to GUIDs to get the data from DMCP table. All order ids got converted into GUID.
    4)     Till here everything is good.
    5)     But when I am trying to pull the data from DMCP table based on GUID, it is pulling only SNP orders not PP/DS orders.
    6)     I have tried so many ways but I am getting SNP orders only.
    7) I need SNP and PPDS orders
    Can you help me on this?

  • Convert Sale order to Planned order in PPDS

    I have nearly 400 Open sale orders to be uploaded in R/3 with some 6000-7000 line items,which needs to be converted to Planned order and subsequently to Production order in APO-PPDS .
    I tried using tcode RRP3 at all stages(Multi Level ), which is manual and time taking job.Is there any way to automate RRP3??
    I also tried via RRP2 by Sale order which is again a manual job.
    Can anybody suggest the correct method with FM/BAPI sequence.I also tried CDPSB0 and then RRP7, BUT because there is no field for quantity, the planned orders are created based on PDS, which does not match my requirement.
    Awaiting for the reply...

    Nawal,
    Sales orders are not 'converted' to planned or production orders.  Sales orders are demand, planned orders are supply.  They are different objects with different purposes.
    You mention that your PDS is not suitable.  Creating large numbers of orders using non-PDS compliant master data can cause future consistency problems for these orders.
    Exactly what do you wish to do, that cannot be done with the standard tools /SAPAPO/CDPS80 and /SAPAPO/RRP7?
    Best Regards,
    DB49

  • Restrict SNP orders on PPDS board

    Hi Gurus,
    When ever I am accessing the Detailed Scheduling board I am able to see both SNP and PPDS planned orders.
    I want to see only PPDS orders and not SNP orders.
    What settings I have to do to achieve my requirement.
    Regards
    Sravan Maturu

    You need to configure 'Decision tables for graphical objects' for the planning board profile you are using in the planning board .
    Here, you need to enter a condition for SAP APO Application eg.
    IF 
    Table Name      3    Order
    Field Name      SAP APO Application
    Relat. Operator NE
    Compar. Value  4  << SNP
    then process to next Decision group.
    I hope this would help.
    Rgs - Vikas

  • PPDS - Order should start at the shift start

    Hi Experts,
    We have SNP orders that always start at 00:00:00 and finish at midnight 23:59:59
    We convert them to PPDS orders, and we would like the orders to always begin at the shift start, which is 6:00 am. Any ideas on how we can make the PPDS orders to start or finish at a fixed time.
    Regards,
    Zeeshan.

    Thanks guys,
    I have shifts and correct start dates maintained in the resource. but the problem still remains.
    The system takes the end date of the SNP order as a basis for backward scheduling, and not the shift start or end date. I beleive that is the standard behaviour.
    Is there a way to force the PPDS orders to start or end at a specific time?
    Regards,
    Zeeshan.

  • Automatic Creation of Planned Order in PPDS Horizon

    Dear Experts,
    Kindly answer my following query.
    I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
    Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
    Best Regards
    Rinju
    Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

    Dear Rinju,
    Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
    Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
    Sree

  • Forecast Consumption in SNP for Make-to-Order products

    We are working on using APO-SNP for Make-to-order products (PlngStrategyGroup = "81" in R/3). We want to achieve normal forecast consumptino on FinishedGoodLevel and generate PlndOrders which shall derive component demand for purchasing (such PlndOrers wont be released to production - they should only function as demand driven on component level)
    What we have done so far: Forecast in APO-DP on Finished good level exists and has been released to SNP. The product gets "ciffed" from R/3 into APO material master with planning strategy group "20" (which is basically "make-to-stock") --> we were hoping this would allow us to use "normal" forecast consumption but nothing happens (FCST is not being consumpted by open Sales orders). Within the product view of such products APO is still "realizing" that this is a make-to-order product.
    Any other ideas / thoughts what could be done to achieve "normal" forecast consumption on FGI level for make-to-order products in APO-SNP ?
    Tks !

    I checked in /n/SAPAPO/RRP3 (Product View), unfortunately only FC exists there
    Seems that the open Sales Orders from R/3 are being created within another segment (the "element" Tab of RRP3 shows 2 segments:
    1) "Make-to-stock" (which contains the FC)
    2) "Make-to-order" (which contains the Sales Orders)
    That might explain the issue I see (FC and SOs are in different planning segment --> no consumption). Reading about planning segments in the help sounds like I need to find a way to bring Sales Orders for Make-to-Order products into the Make-to-stock segment  ... jus a thought .. any idea how to do this ? Does that mean I need to modify the CIF for Sales Order transfer for Make-to-order products ?
    Tks
    Thomas

  • Convert ConRel STO into Purchase Order#

    Hello Gurus,
    I am not very familiar with the SNP part of APO. The scenario is - I have created a TLB order (ConRel STO) in APO but I wanted to revert/convert it to Purchase Order # so that I can see it in ECC. How can I do that. Please advise.
    Thank you!

    Hello,
    On transaction /SAPAPO/RRP3 you select the order and click on button "Order conversion".
    The F1 help:
    Conversion Indicator for Orders
    Use
    When you set this indicator for a planned order or a purchase requisition, the system automatically converts the order into a manufacturing order or purchase order after the transfer to the connected SAP R/3 system.
    The converted orders are then retransferred to the SAP APO system with a different category; a purchase requisition with category BS-ANF becomes a purchase order delivery schedule line with category BS-EIN.
    You cannot set the conversion indicator for scheduling agreement schedule lines.
    Dependencies
    If you set the conversion indicator, and if a conversion rule has been defined for the product, the system executes the conversion checks defined in the conversion rule.
    Best regards,
    Michel Bohn

Maybe you are looking for

  • Firefox crashes everytime I try to open a new tab

    Since today, Firefox crashes every time without fail if I open a new tab (either using keyboard shortcut or the new tab button). This more or less makes firefox unusable. I tried to reinstall but didnt work. I also attempted to disable all addons. I'

  • How change orientation of  a letter before putting on a photo please?

    I have a Christmas photo. I wish to have several letters falling from the sky and some forming "Happy Christmas"at the bottom. I know how to insert letters on to a photo. I wish to change the way the letters fall so they fall at different angles. I h

  • Query runs slowly and times out in CF 8

    I'm trying to run this query using Coldfusion 8 and MySQL 5. If I run the query directly off the database the results are returned very quickly. If I run the query through CF 7, it's pretty slow but still runs. If I run the query through CF 8 it take

  • Different discount date from that of due date without using payment terms

    Hi, We would like have separate discount due date from due date without using payment terms for each invoice. We wants to modify ERDK-FAEDS but unable to find suitable event/exit for the same. So can anyone suggest any event where this can possibly b

  • Missing bill documents from PSA to Cube

    Hi Gurus! I'm looking for some help, I'm uploading billing documents with 2LIS_13_VDITM extractor with full update for testing purposes, I tried first uploading the data to the PSA and after that to the cube, all the data in PSA is ok, but in my cube