Cost of UK 2.0 update?

I know that there's no speculation allowed, but does anyone have any ideas of the cost of the 2.0 update? Is it the converted amount of the US figure - $10? And does it come out on the same date as the, a) iPhone update and/or b) USA iPod touch update? OK, thanks for your help.

The January software update cost $20 in the US and £13 in the UK.
So, yes it was converted - but what calculations they used to convert $20 to £13 no-one knows.
If you halve the US price and add 30% it would get you the UK price.
However, no-one knows if it will be the same for the July Update.

Similar Messages

Cost Component Structure Price Not updating

Hi,
I have run cost estimate and successfully Mark and Released(CK40N). But when I see the cost estimate in CK13N its updating Ram Material cost (Overall and Lower level) but rest of the items not getting updated e.g. Mfg. Machine Time, Mfg Operter Labor, Quality Test Labour etc...
I have checked in Routings each acitivity is assigned and checked. In log "Mat xxxx, Routing does not match selection ID. ZC"
Please advise how can will get update fields(mach cost, labour cost) with values in cost componenst strucure in cost estimate..
Thanks
Srinu

Hi ,
About why routing not match. Please inform your PP consultant as below :
It could be your order type and plant selection id that assign are different. Please Check in OTD in OPL8 under routing tab also check in OPEB for automatic selection of routing also check the status of routing .
If above cannot slove , please goto
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
-check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Thank you.

Cost Centre Plan data not updating FAGLFLEXT

Dear Experts,
In our production environment, our cost centre plan is not updating FAGLFLEXT table. Profit centre plan using GP12N is fine.
We are using the New GL and have FIN-CCA and FIN-PCA scenario activated.
Integrated planning is ticked in the planning versions for both Controlling and New GL Plan versions.
Controlling plan version and New GL plan version have the same name.
In table Controlling table COSP, I can see the plan data on business transaction type RKP1.
I expect to see it in FAGLFLEXT with RKP1 but I see no plan values at all.
In fact, in the previous 3 environments, we have not had this problem and cost centre plan and actual has updated FAGLFLEXT. Only in Production...
Any suggestions? Help if you can! Thanks alot,
Deb

Dear Ravi,
I don't think this is the problem.
It seems that:
- the CC plan was created -> it updated CO tables e.g. COSP -> no update to FAGLFLEXT
- the CC plan was deleted -> it updated CO tables with negative value -> updated FALFLEXT with negative value
-the CC plan was update again -> it updated CO table -> updated FAGLFLEXT and balance with negative value is zero
- the CC plan was deleted again -> it updated CO tabe with negative value -> FAGLFLEXT is in minus value!
It seems like somewhere between first and second steps, the scenario FIN-CCA was not behaving like it was active!
Have you come across this before?
Thanks!
Debora

Cost center (KOSTL) is not updating in HR master table for infotype 0001

Hi ABAP gurus,
We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
While updating cost center, We have one issue regarding infotype 0001.
It is working fine for all the fields except: KOSTL, ORGEH, STELL. Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
While debugging the IDOC function module I found that one condition is there for these three fields.
CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
GRPID = PLOGI
SEMID = ORGA
In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
Can any please provide the reasona and solution for this.
Appreciate the help in advance.
Thanks,
Jitender

Dear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers!

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

"Cost Rollup - No Report" - allow updates getting flipped to No

Hi ,
We have an issue with "Cost Rollup - No Report" program.
When running the 'Cost Rollup - No Report' job in Oracle for the any cost type, whether it is all items or range of items, the 'allow updates' flag for the that cost type keeps getting flipped in the 'Cost Types' form. The flipping of this flag is preventing us from updating any costs in ERP. Can you please advise why this flag keeps getting flipped so we can prevent in the future?
Thanks in advance,
Abhishek

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

Hierarchical Cost planning in CJ40 not updating in CNS41

Hello Experts,
When i am planning cost using cj40 than checking report cns41 so this is not showing cost planned via cj40.
what will be reason of not showing this cost plan. Please guide.
thanks
Sunil

Hello Abdul,
Please check massage given when choosing version 0
You must not use version 0
Message no. BP067
Diagnosis
Version 0 is not intended for cost planning or flagged as a delta version.
System Response
Processing stopped.
Procedure
Choose a version which allows cost planning or
Notify your system manager.
Action by system manager
Release version 0 for cost planning.

Update of Price in Material Master when standard costing is released.

Hello SAP gurus,
When we created standard cost estimate, various cost estimate is created in various views Cost of good sold, cost of good manufactured and Inventory ( commercial ). Different view have different cost estimate.
But we I release costing , the material master is updated by cost estimate of Inventory ( commercial). The cost estimate from Cost of good manufactured should be update?
I am not able to solve the above issue , please help with customizing link
Regards,
Anand Agrawal

Hi Anand,
While you configure the Cost Componenet structure you define the attributes of cost Components in OKTZ.
When defining the cost components, you must specify whether the cost component plays a role in the creation of the different prices that are transferred into the material master record. You have the following options:
Standard price
Costs that are flagged as relevant for stock valuation form part of the standard price if the results of the standard cost estimate are marked and released. These costs also serve as a basis for the following:
The calculation of target costs in variance calculation
The valuation of scrap in variance calculation
The valuation of work in process for the confirmed yield for the operation (order-related production, process manufacturing) or at the reporting point (repetitive manufacturing)
Commercial price
Costs that are flagged as relevant for inventory valulation for the purposes of commercial law form part of the commercial price. This price is calculated in an inventory cost estimate and can be written to the material master record.
Tax price
Costs that are flagged as relevant for inventory valuation for the purposes of tax law form part of the tax price. This price is calculated in an inventory cost estimate and written to the material master record.
The above information will prove helpful.
Regards,
amol

Changes in poduction order,routing not updating in product cost estimate

Dear SAP Gurus,
i had done mto thru sale order and done some changes in production order,routing,and not updated the standard costestimate of newly updated can anybody tell me the procedure of updating the routings and production orders after production order released .
pls help me the standard cost estimate how to get updated while changing the routing,production order.
regards,
muralidhar putta

Hi Muralidhar,
Could you please share with us how your problem was resolved. It may help others too.
Thanks,
Manjula.S

Cost center not updated when posting in non leading ledger

Hello FI Experts
I have two ledgers - Leading and Non Leading Ledger.
When I posted expense entry it updated both the ledgers and updated cost center value. This updated value i checked in cost center report KSB1.
For Ex: Rs. 1,00,000
Now I posted another expense entry in non leading ledger only. For Ex: Rs.50,000
How ever this entry didn't updated cost center report value. I checked in report KSB1
So I want to know:
1. Are there any cost center reports / profit center reports in controlling module where I can get non leading ledger specific amount in cost centers and profit centers
2. Is it possible to run assesment and distribution cycle, cost reposting and other CO transactions for non leading ledger amount
Deepak

Hi Deepak.
You can verify is the cost center was posted on document running tcode SE16N on the FALGFLEXA table, put the document number to do research.
After you can trying to post the new document through Tcode FB50L choosing or not a legder specific, then verify the document was posted correctly running the Tcodes SKb1 or Se16N with FAGLFLEXA table again.
Also you can check this link Checking the Allocation of General Ledgers to Cost Centres
Kind Regards
Jandoval Nascimento

Budget Updation (commitment,actual) after cost transfer

Hi Gurus
we are going to start one project by next month.For that we are finalizing wbs element etc.this project will be in separate plant.
but initial expenses like land acquisition,statutory expenses are already booked against cost center.now we want to transfer the cost in cost center in to wbs elements.I know this can be done via KB11N. But the problem is when i am transferring cost budget details in CJ31 are not updating.means there is no effect in budget (commitment,actual,assigned)
My client wants to update commitment,actual in CJ30 after cost transfer from cost center to WBS
Can anyone help me on this?
Thanks in advance.
Regards
Haran.

Hi Hari,
The expenses transferred to WBSE will be in the form of actuals which can be seen in "Assigned" tab of txn. CJ30.
As per my understanding costing is already carried out in your project & you have used it for budget generation & these actuals were not a part of earlier costing then you can manually update the project cost & copy it again as budget in CJ30.
I hope it will help.

Updating Profit center and cost element in already posted transactions

Dear Expert
Example
we have one g/l account called:30200,& we made lots of posting on this G/l now business want to make it cost element ,and want to update that particular cost element in past transaction with profit center, Kindly guide me how can i do it with SAP
REGARDS
Ajeesh.s

Hi Ajeesh,
Please check this note, it might be helpful note: 98520
Regards...
Jose

Payroll cost codes update i r 12 Urgent

HI all
HRMS has upgraded to 12 .Financials was not implemented.Now they are implementing .When it comes to cost codes how do we update the cost codes !! Cause they have created cost codes and linked to elements at the link lelvel.But they are not using the Financial .i have no clue why they have created this !! But now financials are being implemented and now cost codes has to updated cause they are restrucring the Chart of Account values. How we can update the cost codes !!
Does oracle has API to update the cost codes once i hasbeen configured .Any suggestions on this Greatly Appreciated.

DEar Kumar
AS far as i understand there are no APIS for this where as in general practice we make use of the same valuesets which finance has used but where as in u'r case as the HRMs is implemented first now the Finance guys have to see the Cost Codes which have been defined in the HRMS and is even that is not possible there is nothing u can do rather change the valuesets of the COST Allocation FF.
Hope this information is useful
Regards
Srujana

If i updated my apps will it cost me?

Will it cost me if i put my app store automatically update with wifi? even for the free apps?

No, it won't. If an update in that Application is available, the App will automatically update, without yourself going to the App Store and updating it manually.
Bought Applications will be updated too without charge, however, in-app purchases might change due to the update.
But to answer your question, it does not cost to select the automatic update option.
For more info, here's the link.... Download and install app updates - App Store - iPhone Basics - Apple Support

Cost of UK 2.0 update?

Similar Messages

Maybe you are looking for