Costs and revenues for service contracts

Hello,
Does anyone know a transaction where you can retreive a simple overview of the costs and revenues for contracts (contract type WV Service and Maint.)? Within transaction VA43 there is a cost report but that report only lists only the data of the processed contract.
Sebastiaan Bakker

Hi,
Check out the following site for your querry.
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba8e6413911d1893d0000e8323c4f/frameset.htm
regards,
Siddharth.

Similar Messages

Forecasted revenues for Service contract

Hi
We have few service contracts which are in being processed status.
In the service contract if i go to cost report ( enivornment -->cost report) the settlement revenues to COPA is zero.
Why is this amount coming as zero. Should it not be equal to the value of service contract as this is forcaseted/plan revenue.
Thanks and Regards,
Satya

Some additional info:
The billing plan is maintained.
There are 2 partial invoices. with one invoice in the past data. The second partial invoice has a billing block.
Thanks and Regards,
Satya

Configurations and flow for Service contracts

Friends,
Can anyone tell me the configuration steps to configure Service contracts with Delivery related billing.
I need to configure from the scratch?
Thanks!!

I hope following 2 SAP Building Block will be helpful your requirement:
- [H76: Service Management - On-Site Service|http://help.sap.com/bp_hightechv1600/HighTech_DE/html/H76_EN_DE.htm]
- [H29: Configuration Service Contract Management|http://help.sap.com/bp_bblibrary/600/HTML/H29_EN_DE.htm]
Regards
JP

Cost and Revenue of Internal Order

Hi
The table for internal order master data is AUFK
but when we assign internal order to sales order and subsequently revenue and cost are booked ,it is accumulated in the same internal order
In which table do we find the actual cost and revenue for the internal order
Thanks and Regards
Sunil

hi..
For internal order level expenses elementwise please use table COEP. Earlier one i mentioned for Material Ledger related cost componant split.
thanks
kkumar

Resuls Analysis for Service Contracts - Revenue in Excess of Billing.

Dear Experts,
We are running RA for Service Contracts.
COntract period is 01/11/2010 to 30/10/2011.   Montlhy Value is 1000, Yearly value 12000
1) The Billing Plan is Quarterly Billing (deferred).If we Run RA in KKA3. Planned revenue showing is 12000 / 4 quarters = 3000 .
                             If we Run RA in KKA3 , the planned revenue shown is 3000 instead of 12000.
2)                          We have incurred some cost for the month of November 2010.   If we RUN RA on KKA3 for the month of november 2010 , we should get 1000 as Actual Revenue and 2000 Should be shown in Revenue in Excess of Billing(REB). But it is not showing as Revenue in Excess of Billing.
Please help.
Regards,
Shareeq
Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 28, 2010 2:55 PM
Edited by: K M AHAMED SHAREEQ HUSSAIN on Nov 4, 2010 4:18 PM

Dear Experts,
The Planned Revenue problem is solved now. We will have to run a Program(OSS Note). The Revenue in Excess of billing is there. Please help.
Regards,
Shareeq
Edited by: K M AHAMED SHAREEQ HUSSAIN on Nov 7, 2010 4:32 PM

Service Order Costs and Revenue

Hi,
Can you please let me know how to find costs and revenue related to service orders?
what tables to go to?
Thanks,
MS

Hi Mahesh,
Thank you very much for that quick response.
EKKO is for purchasing documents. Can you please let me know how to use it for my service order?
Thanks,
Maulik Shah

Service Order Actual costs and revenue

Hi,
Can you please let me know how to find actual costs and revenue related to service orders?
what tables to go to?
We are planning on going back to a service order from the billing document and get the actual labor costs.
Thanks,
MS

Hi Mahesh,
Thank you very much for that quick response.
EKKO is for purchasing documents. Can you please let me know how to use it for my service order?
Thanks,
Maulik Shah

How to create service items and sales order for service contracts.

Hi,
I have created item using Purchased Item template and one more item(service item) using service /warranty program template. Then I have used these items to create sales order with service item in it and closed that order , but Iam not getting this order in service contracts. Is this right way to create sales order for service items. I
item name:- personal_computer
copied from purchased order template. service is enabled and install base is checked and enable service coverage is enabled.
item name:- service_item
copied from service /warranty program template
service is selected to inactive,
service type: service
duration: 1 year
template: Gold
and saved the item.
Then I have used these two items in sales order for service contracts. But that sales order is not hitting in service contracts. Is there any error with item creation.
Thanks,
Bharat G.

Following SAP Notes to be referred for Service Tax:
1. 778976 u2013 Service Tax and Ecess on Service Tax
2. 1032265 - SEcess on Service Tax
Regards
AK

RA for Service Contracts.

Dear Experts,
We are running RA for Service Contracts.
The Contract period is 01/11/2010 to 30/10/2011. The Montlhy Value is 1000, so the Total value of the Contract is12000
The Billing Plan is Quarterly Billing (deferred). We have incurred some cost for the month of November 2010. If we RUN
RA on KKA3 for the month of november 2010 , we should get 1000 as Actual Revenue and 2000 Should be shown in Revenue
in Excess of Billing(REB). But it is not showing as Revenue in Excess of Billing.
Please help.
Regards,
Shareeq

Patch Updated.

Mile stone billing for service contract

Hi gurus,
can you help me for the following:
i want to configure mile stone billing for service contract in my client business process,
can any one send me the complete configuration process steps for mile stone billing.
I'll reward you full marks,
Thanks in advance
nitchel

Hiya...
Billing Plan for Milestone Billing
Milestone billing means distributing the total amount to be billed over multiple billing
dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of
the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a
billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and
cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone
billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the
individual milestones.
IMG configuration requires :-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System
confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the
basis of the requested delivery quantity and not on the total of the confirmed quantities.
The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
To display the project-related data for a schedule line, proceed as follows:
In one of the overview screens of the sales document, select
1. Item -> Schedule lines.
2. Mark the schedule line and select Procurement details.
The following figure shows an example of milestone billing where only the Contract have
been billed :
Order Item Turbine    100,000
Billing Plan
Billing date Description    % Value Billing Block   Milestone   Billing Status
01-10-94     Contract      10 10,000      -             x           x
01-03-95     Assembly      30 30,000      x             x
01-04-95     Maintenance   30 30,000      x             x
01-05-95     Acceptance    30 30,000      x             x
01-06-95     Final invoice ..    ..        x
Network/Activities
Milestone    Estimate      Actual
Assembly     01-03-95      01-03-95
Maintenance 01-04-95
Acceptance   01-05-95
For each billing date in a milestone billing plan, you can specify whether the billing
date is:
1. fixed
2. always updated with the actual date of the milestone
3. updated with the actual date of the milestone, if the date is earlier than the
    planned billing date for the date
Keep Sapping
Regards

Settlement of Project Cost and revenue to GL

I am trying to Settle the project Cost and Revenue to GL account. For the same I have defined settlement profile maintaining GL as optional receiver and then I have maintained Source structure for cost and revenue as to separate them at the time of defining settlement rule, defined Allocation structure where in receiver against source, I have assigned GL as by cost element receiver. After that I have maintained settlement rule for WBS element, but when I am running a settlement is done to either of the GL for cost or Revenue which ever is defined first in settlement rule. It is not creating any settlement for second line item of the settlement rule and system is not giving any error message as well.
Where as if I am trying individually only for cost or revenue , settlement is completed with all the values but with any accounting document generated, but if I see the entries to that GL, a settlement entry is created for that transaction.
Can anyone please help in solving this issue ASAP.
Thanks and Regards

Hi,
    If it is posting to the first line means....
Follow the steps below:
First try to create a project and post the actuals and revenues.
Go to cost element report pick up those cost elements both for costs and revenues.
Go to Soruce Structure in the config, define the structure with name for Ex: 'Z1' and define two assignments, one is Costs and other Revenue, by selecting the costs go to Source mention the cost element where the actual costs are posted on (Mention only that cost element no other cost elements), next select the Revenue assignment and click on Source and mention the only cost element where the revenue wsa posted (Mention only that revenue cost element no other cost elements) and save the transaction.
Come back to project builder, select the wbs and click on settlement rule, in the menu goto-->settlement parameters and check whether the source and settlement profiles are correct or not, incase source structure is not available mention the same.
come back to settlement Rule overview and fill the fields as mentioned below:
1st line:   Category: GL
              GL Account: GL Account Number
              Source Structure: COSTS
2nd Line: Category: GL
              GL Account: GL Account Number (Revenue Account)
              Source Structure: REVENUE.
Now Run the Settlement for the specific period costs posted, the costs will be posted seperately to the two different GL Accounts.
I think this will resolve your problem.
Rgds
Sudhir Reddy

How do I "run" an ldt file for Service Contracts?

Ref. BugNo. 4450150
How do I “run” an .ldt file for Service Contracts?
Do I use FNDLOAD and if so is this the way to do it
FNDLOAD apps/apps_password 0 Y UPLOAD @FND:OKS_TOP/patch/115/import/US/okskfinv.ldt
Thanks

See Note:142483.1
Subject: How to Define the ORACLE_SERVICE_ITEM_FLEXFIELD

BOM IN CRM Only for Service Contract

Hello
We want have a BOM explosion working in CRM for service contracts
Here are the details :
We have replicated the materials from ECC to CRM. We are not maintaining any BOMu2019s in ECC.
The idea is that we maintain the BOM Structure in CRM only, as we donu2019t want to have the Items as a billable item in a position, only for information purposes (or later on for metering)
We have maintained the product category for the header product in CRM so we are able to maintain depended components
(Relationship type SCDEC S Dependent Components (DC) )
Not we are able to assign dependent component to the header material
Item category groups:
We understand that the standard item category groups that should be used are ERLA for the header product and LUMF for the Item product.
In order to support the same functionality for the given item category group , maintained at the product level in ECC we copied the same setting for the item category group from the standard to
our settings.
Standart
Tx type     Item Cat Group          item category     structure scope
TA             ERLA                TAQ           A single level Explosion of Structured Product
TA         LUMF                TAP                   A single level Explosion of Structured Product
So we have copied TAQ to ZTAQ and TAP to ZTAP.
ZS01 is a copy of SC (service contract)
Tx type     Item Cat Group          item category     structure scope
ZS01     ZLEI                       ZTAQ          A single level Explosion of Structured Product
ZS01     LEIS                       ZTAP          A single level Explosion of Structured Product
But when we use a header product in the service contract, we cannot see the BOM is exploding.
We have also created some products in CRM with exactly the same Item Category groups as the standard and when we create a standard order (TA) in CRM, the BOM is NOT exploding.
Questions:
Is it possible to have the BOM setup only in CRM, like we try to do it?
Is it possible to use our own item category groups in CRM more is the functionality only working with ERLA and LUMF?
Is it possible to use the BOM Explosion in Service contracts as well ?
What steps are we missing to get the BOM explosion in CRM ?
Thank you for your help
Frank
Edited by: Frank Foerstner Foerstner on Dec 9, 2011 12:34 PM

Thanks Nablan, I could do that for multiple header coming in file. But I have a question for you on BAdI ALM_ME_006_GOODSMVT. I have implemented this BAdI , and this BAdI is called by a function Module ALM_MEREP_006_CREATE. When I test this FM giving the Material , Orderid and Movement type entries, this BAdI is triggered when giving a breakpoint. I've given this code for changing the movement type to 961. Cause the stanadrd scenario does not maintain Movement type 961 in Mobile Asset Management. The Movement type 961 for unplanned Materials comes to SAP and changes to 261 as maiantained by TCOKO table. To bypass this & retain the movement type 961 in SAP I'm using this BAdI. Currently this is what I'm doing and am stuck in the method interface how do I call the method.
method IF_EX_ALM_ME_006_GOODSMVT~CREATE .
break-point.
*DATA : i_ce_goodsmovement TYPE REFERENCE
          ALM_ME_CUSTOMER_ENHANCEMENT.
DATA : lr_badi_goods_movement TYPE REF TO if_ex_alm_me_006_goodsmvt.
DATA : ls_user_data TYPE ALM_ME_USER_DATA-USERID.
*DATA : goods_movement TYPE ALM_ME_MATERIAL_MOVEMENT.
CALL METHOD lr_badi_goods_movement->create
EXPORTING
       ce_goodsmovement = ce_goodsmovement
IMPORTING
       user_data        = ls_user_data
       custom_user_data = ls_ce_user_data
       goods_movement   = goods_movement
changing
       return           = return[].
CALL FUNCTION 'ALM_ME_COMMIT_OR_ROLLBACK'
       TABLES
            return = return.
endmethod.
Please help me to get the data in this method. How do I call this.

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
How would one go about arranging for such service?
Why is it impossible to contact a real human for support, either via online chat or phone?

Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely.

Automatic invoice generation for service contract

Hello,
I want to create the automatic invoicce generation for service contract based on the order.
whenever i raise service contract order system should create the invoice automatically.
could please let me know the settings?

Hi JP Reddy
You can schedule VF04/VF06 for your requirement, such that VF06 will run every 15/30 minutes and will generate billing document for your contracts automatically.
Else go for Z extension development which will assign as output type to your contract and once triggered it will create invoice.
try and revert

Costs and revenues for service contracts

Similar Messages

Maybe you are looking for