CUCM DB access

Trying to get access to the CUCM database (we have version 10.5) to be able to run custom reports.
We currently have a linked server in SQL Management Studio for UCCX with an Informix ODBC driver set up as a system DSN... Is there a similar way of doing this but with CUCM?
Unable to find anything online
Help would be appreciated

No, we only provide AXL or run sql from CLI

Similar Messages

  • Accessing performance counters in CUCM version 6 and above

                       I do know that the older versions of CUCM allows access to windows performance counters using perfmon as explained in this doc
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/4_0_1/ccmsrvs/ssperf.html
    However in the later versions of CUCM which runs on Linux OS, is there any way that these counters are made available apart from the RTMT?
    I  have included monitors for CUCM using SNMP, however certain error conditions such as DB replication etc are not available using SNMP. What is the best way I can capture these parameters if I dont have the RTMT?
    Thanks in advance
    Roycey

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_01.html
    As to the other post, just copy the URL and remove partner/

  • Scripts in Unity Connection

    Hi,
    I have a Cisco CallManager 8.6 and a Cisco Unity Connection 8.6 on VMWare.I purchased the bundle (solution) Cisco BE 6000.
    I did the integration of the Unity Connection with the CUCM via SIP (I also created a trunk SIP on CUCM to access CUC).
    I would like to use the Unity Connection as AutoAttendant.
    My question is this:
    In Unity Connection, could I make scripts like I do in Cisco Unity Express with the CUE Editor?
    I want to use the Unity Connection as AutoAttendant as follows:
    - The incoming call goes to a Extension of Attendant Console. If the call is queued for 15 seconds the call is forwarded to Greeting of AutoAttendant Unity Connection saying "you will be attended shortly, please wait"
    - After Greeting the call is again transfered to the Extension of Attendant Console. If the extension is available the call is answered but if the call is again queued for 15 the call is again forwarded to the Greeting of AutoAttendant Unity Connection saying "you will be attended shortly, please wait"
    - After Greeting when the call is transfered to the Extension of Attendant Console.If the call continues queued for another 15 seconds the call is transfered to another Greeting of AutoAtendant Unity Connection saying "we apologize for the incovenience. Please call back in a few minutes"
    In Unity Connection, could I make scripts like I do in Cisco Unity Express with the CUE Editor?
    The only way I know to do this is with the CUE Editor or CCX Editor (Contact Center Express).
    Is there any way to do this with the Unity Connection?
    Thanks

    No scripting or queueing with Unity Connection.  With BE 6000, you would need to leverage UCCX.
    Hailey
    Please rate helpful posts!

  • How to configure AutoAtendant on Unity Connection

    Hi,
    I have a Cisco CallManager 8.6 and a Cisco Unity Connection 8.6 on VMWare.I purchased the bundle (solution) Cisco BE 6000.
    I did the integration of the Unity Connection with the CUCM via SIP (I also created a trunk SIP on CUCM to access CUC).
    I would like to use the Unity Connection as AutoAttendant.
    To do this I saw in the forum that I have to configure:
    - a CTI Route Point with a DN on CallManager.
    - To do a "forward all" on CTI Route Point to the VoiceMail
    - On CUC to Add a new System Call Handler and to assign the same DN than the CTI Route Point
    - to go to the Call Handler and to change the default message via My Personal Recording.
    it would be well?
    would I also have to create a end user on CUCM with Associated Device the CTI Route Point to see this DN as User with Voice Mail on CUC?
    I would like that the AutoAttendat after Greeting to transfer the call to the DN which is the Pilot of Attendant Console. This action I don´t know how to do it.
    I'm confused because I see on Call Handler a field called "After Greeting" with some settings (Call Action, Call Handler, Directory Handler, Conversation, User with Mailbox) but I don´t see any parameter where I can configure the DN to transfer the call.
    I also the field called "Call Transfer Rules" but I am confused.
    Another thing, could I to configure the CUC for the Auto Attendant works in one way some days (office hours) and out office hours and holidays works in other way?
    It is possible to do on CUC to upload "Recorded Prompts" as UCCX Express to configure them as Greetings or I have to record My Personal Recordings with a Phone?
    Can you help me, please?
    Thank you very much

    Hi,
    I continued doing tests but I don´t get that the call is transfered to the Attendant Console Pilot after Greeting.
    Sometimes I think that the Unity doesn´t know how to get to Atendant Console Pilot Point.
    I read in the forums that I need to configure a call system transfer, by default transfer numbers that are recognized are only elements from CUC and to dial any other number which is not configured on CUC you need a call system transfer.
    I also that I need a caller input or a routing rule to reach a call system transfer.
    But in my case I want that after greeting the external call (DID) goes to Attendant Console Pilot without dialing any key, ie the outside caller call and he gets the greeting and after is redirected to the Attendant Console Pilot. Therefore I think I don´t need to configure any "caller input".
    I did some tests with routing rule but I had not any luck. Could be due to the Unity Connection doesn´t know to get the Attendant Console Pilot.
    Remember that I did the integration between CUCM and CUC via trunk SIP. How the Unity Connection knows that to get the Attendant Console Pilot it has to go to the CallManager (via SIP)?
    I am confused.
    Can you tell me how can I do this?
    Regards

  • Making changes to web access phone setting CUCM 8.6.2

    Hello,
    I have a question on a change I need to make on our Call Manager. We use the Berbee Informacast product for emergency notification. It requires that the Web Access parameter be enabled on the individual phones in order to send audio broadcasts. I have learned that after a certain version of CUCM (8.6 perhaps) this setting was set to disable by default on the Enterprise Phone Configuration section on CUCM. We have had this version running about a year now and many many phones have been installed since then. These phones have the web access disabled I believe because of this being disabled on the server settings side. My question is this...
    Would it be better to go into System > Enterprise Phone Configuration>Web Access setting and set to enable
    or
    Do a bulk edit on all phones to enable, reset phones.
    What I am not sure about also is if I change on the system side if it will automatically update and reset phones.
    Just not clear on the right path to take on this...
    Any ideas?
    Thanks,
    -Nick

    Thanks for the great info. This is what I did.
    Changed web access to enabled in Enterprise Phone Configuration. Clicked Ok, manually rebooted a couple of phones with no web access. Still didn't work.
    Changed web access to enabled in Device>Device Settings>Common Phone Profile>Standard Common Phone Profile. Clicked Save and rebooted the same two phones. Worked great.
    Ran job scheduler to reboot all phones (1600 of them) and all seems to be good now.
    Thanks again Chris!

  • CUCM 8.6.1.2000 - Call History not logging, and no ring tone access.

    Hello,
    A little background:
    Recently, I setup a UCS C-210 M2 with CUCM 8.6.1 and restored our Pub and Sub to it. Also migrated to from physical Unity to Virtual CUC, same with Presence.
    I've also setup a 2nd CUCM Sub, as well as new CUC and CUP subs on a second UCS C210. I also upgraded CUP to 8.6.4. before adding the Sub CUP node.
    I'm thinking my problems began when I added the 2nd Subscriber CUCM node on our 2nd C210. Here is a description of what's going on.
    -  I cannot change ring tones on an IP phone. I get "Ring List Unavailable" when I try to change a ring tone. I noticed that my phone had changed over to the CTU ring tone around the time I brought up the VM environment. The CTU ring tone was a custom one I had loaded at one time.
    - I cannot access any call history on my IP phone. My Jabber client logs call history just fine.
    Seems to be a TFTP issue, but I restarted the Cisco TFTP service yesterday, and it did not help. I also reset the Device Pool, which didn't seem to do anything.
    Also, I'm still a bit unclear on which services I should be running on my new Subscriber node.
    Any help is very much appreciated. Thanks again, guys!!
    -Jonathan

    I had this issue and resolved it. The problem was that we had changed DHCP servers over to a different platform and the new DHCP server didn't have Option 66 defined to point the phones to a TFTP server. Once we re-specified the TFTP server IP's for option 66 in DHCP and reboot the phones the issue was resolved.

  • Accessing CUCM DB

    Dear Experts,
    How can I access the CUCM 6.1 Database to get some data from the logs?

    Logs are accessed via RTMT; however, you can access the database via the CLI or the AXL toolkit. AXL is your only direct SQL interface option under the VOS appliance model.
    http://developer.cisco.com/web/axl/docs

  • Getting error "Http 404 not found" while accessing CUCM GUI..

    Hi,
    Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
    Please find attached screenshot for ur referance.
    Thanks & R's
    Harish

    Hi Aaron,
    I have restarted dat service bt still the issue is persisting.
    Now its showing attached error.
    Thanks and R's
    Harish

  • Cant access serviceability from one CUCM server to the next

    If I log into my pub and serviceability, I try to access my other subs. I keep getting an error when trying to access the other servers from the drop down list. Although, everything is replicating throughout the cluster, I can log into another CUCM and only use serviceability for that one server also.
    Im going to do a reset tonight on the cluster. the logs are clean and clear on RTMT on all servers. It's very odd. I thought maybe a security password would be wrong, but there are no errors anywhere on any server in the cluster.

    Hi,
    there is a bug associated to this issue
    Unified Serviceability Tools can not connect to other nodes
    CSCud67438
    Description
    Symptom:
    Cisco Unified Serviceability pages Tools -> Service Activation or Control Center Feature or Network Services can not connect to other nodes in the cluster.When another node is selected the Status indicates Connection to the Server cannot be established (Unknown Error)
    Conditions:
    CCMService Tomcat logs indicates the following error message when attempting to connect to other nodes in the cluster,
    {http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLException: Certificate not verified.
    Workaround:
    We have the following workarounds
    - Accessing SUB serviceability pages directly
    - Restarting tomcat on PUB ( once ) after the upgradeFor SNMP configuration where same Community string needs to be added or modified on all nodes, again using a Subscriber node instead of the Publisher also seems to work in this case.
    regds,
    aman

  • Cannot ping or access web GUI on CUCM 8.6 after re-started

    Hi,
    I have re-started cucm sub/pub on esxi host 5.0 and now i'm anable to access web GUI and can't ping to server IP.
    can access the console on vmware ping between two server work fine.
    Any idea to resolve this?

    Hi Terry,
    This is the response from TAC.
    Sometime i'm able to ping and can access but suddenly stop connectivity. there is a unity server on same host it has connectivity all the time.
    below comment from cisco tac.
    Ping to SUB was failing.
    Logged in to VSphere Client, did not see any error/events for the server.
    “utils diagnose test” and “show network eth0 detail” did not give any errors.
    Able to ping the PUB, NTP and the default gateway from the SUB.
    SUB is reachable from the PUB as well with DB replication in a state of 2.
    By this time SUB was reachable as well.
    Pulled Syslog to check for any errors and we did not see any.
    No issues on the SUB.
    Thanks,

  • Access Denied: CUCM Licensing Bulk Capabilities Assignment for CUPS

    Hi,
    I am building a CUPS 8.5 server. On CUCM 8.5 Administration System->Licensing->Capabilities Assignment->Bulk Assignment is giving me an error.
    Access to the requested resource has been denied.
    The attempted action was a violation of security protocols and will not be allowed. Please try another action.
    I noticed that the Bulk Assignment button is crossed out with a red sign.
    I can assign CUP/CUPS by clicking on the users individually.
    Any ideas why this might be happenning?
    Regards,
    Alp

    While Bulk Assignment doesn't work in the GUI, it is still possible to do Capabilities Assignment in CUCM 8.5 using the Bulk Administration Tool.  Format the comma-separated file according to the instructions in the View Sample File link in Bulk Administration -> CUPS -> Update CUPS/CUPC Users:
    User ID,Enable CUP,Enable CUPC
    xmzhou,t,t
    ddaiker,t,f
    |____|  | |
       |    |  |
       |    |  |
       |    |  |
       |    |  |
       |    | Enable CUPC (1 char, mandatory)
       |    |
       |     Enable CUP (1 char, mandatory)
       |
       |
       User ID ( 1 to 128 characters,  mandatory)
    Upload the file in Bulk Administration -> Upload/Download files as a CUP Users target and Update CUP Users transaction type, then apply the file in the CUPS user update page where you got the sample file.

  • Access to Corporate directory doesn´t work in cucm 9.1

    Hello,
    we are trying to access Corporate directory from ip phones without LDAP integration. The IP Phone gives me that answer when I press directory button.
    Error XML[4]: error analisis
    My question is if LDAP integration is neccesary to access Corporate directory.
    Thanks in advance

    Are you using a locale different from the default (En-US)? Can you check if the phone locale that was installed on the CUCM is compatible with the phone firmware? Can you try a higher phone firmware and higher locale which is compatible with that phone firmware?

  • Feature Access Codes on CUCM

    Dear Colleagues,
    I have to implement some Openstage IP phones (as a 3rd party SIP phone) under our CUCM v9 and I need an advice.
    The registration was success, and the call forwarding as well, but I stucked to implement couple calling features. After some research I tought that I should use Feature Access Codes, but what I found it is all about CUCM Express only.
    For example this page: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefacs.html
    Is there any way to use Feature Access Codes on CUCM? And how can I use this possibility?
    Kind Reagrds,
    Laci

    No, you're correct, that's CME only.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Web access to ip phones is not working although it is enabled on CUCM

    Dear All,
    i enable web access for ip phone ,but still not able to access the phones through web.
    Regardsm
    Moath

    What call manager version are you using?  If you're on 8.x there is security by default and if you're on an older version it's possible you have security enabled (CTL files) which would be causing your phone not to trust it's TFTP configuration file, which is where the web access setting is passed to the phone.  If you look at Settings > Status Messages on the phone do you see anything such as trust list update failed?  If you see that it's likely an ITL file issue.  If you go into Settings > Security, and delete the ITL from the phone it will download a new one automatically from your TFTP server.  Once the ITL is correct the phone should trust the TFTP configuration file and update the web access setting on the phone.

  • Jabber 9.1 Registration To CUCM 8.6.2

    Good evening,
    I have a problem I am hoping someone can answer for me. I have a CUCM/ Unity Connection/ CUP platform which are all 8.6x
    I have configured all the components and I am currently trying to get Jabber to work, I have 1 user who has 2 clients he wants to use. One client is is home Mac and the other his work Windows based laptop.
    Jabber 8.6.4 on the Mac works 100% the client can call, access voicemail and use IM with no issues. The same user when he tries to login with his Windows based client gets IM and authenticates to Unity Connection OK but the client does not register with CUCM and therefore he cannot dial out and so all telephony functionality is unavailable. The options in the windows client only show Phone accounts for the voicemail server which all look OK.
    It looks to me that the windows client is not getting the correct paramters from the jabber-xml file (infact I cant find one in the tftp server which is CUCM) or maybe I need to have 2 softphones detailed in CUCM, i.e one for each client (MAC & PC). I have all the CCMCIP and trunking etc working fine, along with the relevant AXL, LDAP and CTI users set up ok.
    Anyone have an idea of where I may be going wrong ?
    Thanks
    S

    Hi Jonathan
    I have tried your suggestion but while the symptoms are slightly different I am still not able to get the Windows client to register with CUCM.
    If I disable the softphone on the mac client then exit Jabber on the mac, then I open the Windows client initially the results are exactly the same. However if I then sign out of the windows client and back in I get the option on the bottom right of the client to choose the softphone source (i.e computer or deskphone) but then no matter which one I choose the client sits at the setting phone prompt and still does not register.
    I guess one option for me may be to run a WIndows client on the home Mac using VMware fusion and use the same client, hopefully then the graceful softphone registration may work between devices running the same client?
    Many thanks for your reply, very much appreciated.
    Best
    Steve

Maybe you are looking for