Define Flat Rate for Travel Cost based on location (Maximum points awarded)

Hello,
SPRO>Financial Accounting>Travel Management>Travel Expenses>Trip Reimbursement Amount>Reimbursement Amount Travel Costs>Define Flat rates for Travel Costs, in this path we can enter the reimbursement amount for trip country/ trip region. I created different reimbursement amounts for different locations(additional locations/regions can be created in table T702o for country US) for USA but in expense report its taking only default amount (0.36) that is already there for Country:US not the amount i gave (0.27) for different location even when I gave the location name in the expense report. Could anyone tell me what i am missing. Do i have create corresponding WT for these expense types based on location.
Thanks,
Latha

got solved

Similar Messages

How can I enter "Flate rates for travel costs" with more than 2 decimals?

Hi expert,
I want to enter flat rates for travel costs in table T706F.
I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
I don't want to change the decimals for this currency.
I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
This seems pretty drastic.
Do you know if there is another way to handle this issue?
Thank you.
Kind regards,
Linda Verding

Hello Christian,
I have checked it with consultants from SAP Brussels.
They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
I will create a new currency (EUR3) with the description "for travel expenses only".
Kind regards,
Linda Verding

Is an update of "Flat rate for travel costs " possible by company code?

Hi,
I want to update the reimbursement amount in SPRO in "Flat rate for travel costs "
I need to select a "Trip provision variant: e.g. Belgian accounting".
Can it be selected by Company Code as well?
Thank you for providing your feedback.
Kind regards,
Linda

I close this call.

Incorrect exchange rate for Actual cost documents

Dear all experts,
I have an actual cost documents which was created on 02.10.2006,it should be taking the value date for currency exchange as 01.09.2006,but it is taking 01.
04.2006 hence it resulting in picking wrong exchange rate.Any solution to solve it and what is the cause of this issue? Thank You

hie, the currency is set in the table TCURR. the time rederence ? sorry,I am very new to this.the user just told me to that the currency for actual cost taken wrongly,all i managed to check is tat the value date for currency translation for tat particular actual cost document is 01.04.2006,tat's y it took the wrong exchange rate. And i guess the exchange rate is already updated in BW.

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Is it possible to have one central user defined exchange rate for a project

When i create deliverables for a project. It asks for an exchange rate type. On entering user i am prompted to enter an exchange rate.
Is it possible to use the exchange rate setup at the workplan level for all deliverables rather than entering the rate at each deliverable.?

Hello
The exchange rate value you set in the workplan is only used for converting planed amounts entered in foreign currency. There is no standard functionality to configure a default value for USER conversion type.
Could you further elaborate on the business requirement? Why do you use conversion type as USER for events, and not a centralized conversion type managed on the GL daily rates?
Dina

Flat rate for Apple Depot screen repair? Downside?

I'm sure I could have found a better place for this, apologies in advance.
My friend's A1226 display is glowing, but striped and basically not working. Took it to a store and they said $450 repair in-store, $350 for the Apple depot. Are they assuming the display is no good, even though it might just be the cable? Is that covering a display repair? Is there a downside to the depot service, is it warrantied? I suggested he take that route as I didn't want to be involved in repairing the LCD, expensive proposition and dangerous if I mess it up or the issue is not the LCD. Is it going to get to the depot only to have them say its more?
Appreciate any guidance you can give.

Here is my experiance with Apple Depot...
Like many 2011 macbook pro my screen started to act up and ended up turning off (reports of issues with the GPU - logic board)
Took it to Apple, gave me 2 options...
1-In store repair which would cost more than $900 only for the logic board 0_o
2-Depot repair for $310
Guess which i chose?!..
Sent my 2011 macbook pro on wednsday and recieved it on the following tuesday
Depot replaced my logic board, memory ram, screen hinges AND battery...
All for $310
HAPPY HAPPY HAPPY

Need info for COPA (Cost based profitability analysis)- Archiving objects

Hi All,
SAP have introduced new 2 Archiving objects COPAA_xxxx, and COPAB_xxxx instead of the old archiving object COPA1_xxxx.
Where xxxx = operating concern.
Can any one please give the document path how to archive the COPA data.
Means exactly i want the variant parameters for the 2 new archiving objects.
Please waiting for your reply...
Thanks,
Nagendra

Hi Chandra sekhar,
I need to Archive the data in R/3 system & ECC6.0 not in BW system.
I want the steps how to Archive the 2 objects COPAA_xxxx, COPAB_xxxx in ECC6.0 System.
Please if have any info please help me...
Thanks,
Nagendra

How to define an owner for an organization/department/cost center

Hello Friends,
I have a requirement in which i need to route requisition approval to the cost center(fetched from the charge account) owner.
I am trying to find a standard way to achieve this. Is there any standard feature available to establish this relationship.
Any ideas?
Version : 11.5.10.2
Thanks for your help !
Regards,
Amit

Assuming that one person typically raises requisition for one cost center only, you can try the following approach.
You can define a position for each cost center manager.
Then you have do define one approval group for each cost center.
When defining the approval group, you have to use the a/c range such as
000-000-403-000-000 to zzz-zzz-403-zzz-zzz.
where 403 is the dept. number.
Then you have to assign the approval group to the right position.
Then you define your hierarchy (either purchasing or employee-supervisor) where each employee reports to his appropriate department manager.
This way, when an employee raises a requisition, it will go to his boss and his boss will have the authority to approve the requisition only if the requisition is for his department. If not, the requisition will go to boss's boss.
If your requirement is that one person may raise requisitions for different Dept. and they should get routed properly. I believe you will have to go for AME.
Hope this helps,
Sandeep Gandhi

Maintain overhead rates for cost centers

hello
could some one tell me when i should i maintain overhead rates for the cost centers.
thanks
ram

Hi,
If I do not misunderstand your question on "WHEN", to take the overhead calculation on cost center effective, you need to setup the costing sheet and assign the costing sheet to the receiving cost centers to collect overhead before you take overhead calculation for them.

Travel costs not appearing in the sttlement and in standerd form prf0

Dear Experts.
i could'nt get travel costs in the settlement and in the prf0 -standerd form
but i could get meals perdiem reimbursement and accomidation reimbursement.
could u pls pass some information
i have configured reimbursements for travel costs in the tables
V_T702N_H
copy from trip
copy from trip
travel costs flat rates for all trips.
in* V_T706F*
Car
All Vehicle Classes
All Employees
No Cumulation
India
India Thiruvananthapuram
Business Trip
All Trips
All Trips
INR Indian Rupee
100.00
1,000.00
and in the table V_T702N_A
1 3 0 0 2 1 0 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
out put in prf0 is like this
                                Travel costs
                   Car Tax-free Comp.          Tx-free    Addit.    Reimburs
Date               cl. amount amt. Mls/kms   amount    amount     amount
Tot. amounts travel costs in INR                  0.00      0.00       0.00
kindly help
thanks
vj
Edited by: k vj on Nov 11, 2009 9:54 AM
Edited by: k vj on Nov 11, 2009 12:24 PM
Edited by: k vj on Nov 12, 2009 6:05 AM

Hi Alagesan,
It seems the allocation structure for services is not maintained in controlling area. Ask your CO guy to maintain it properly.
Prior to this please check that you have assigned value categories to the cost element in Plant Maintenance & Customer service.
Thanks

Difference between account based and cost based in co-pa

hi friends,
what is main deffirencebetween account based and cost based in co-pa. what scenerio we use account based and what scenerio we use cost based.
Thanking u
suneel.

Hi,
It all depends on the OPerating oncern which you are going to use for the CO-PA implementaion.
For a account based Operating concern you can define accopund based copa.
For a Cost Based Operating concdern you will have tp define account based Copa.
You can create account based Copa on cost based operating concern and vice versa.
In most of the FI implemntaion is done before BW inplemetation and therefore Operating concerns are already defined by the FI people.
Thanks
Message was edited by:
Ajeet Singh

G/L account determination for shipment cost

Hi Experts,
I am having a problem setting up account determination for shipment cost document.
When saving shipment cost document, SAP generates "service entry sheet" (PO) and GR with accounting document,
but I would like to change the default G/L account by shipping condition type.
So far, I have set up automatic G/L account (OBYC), GBB and WRX, but I could only define the default one.
Could you please advise if it is possible to change G/L account for freight accrual?
and if yes, how to change G/L account determination by shipping condition type?
Thank you
JK

Hi,
1. Menu Path: Logistics Execution > Transport > Shipment Costs > Pricing > Pricing Control > Define And Assign Pricing Procedures
Transaction Code: SPRO
Shipment pricing procedure is same as the standard pricing procedure and uses condition technique to retrieve the data from condition tables.
2. Pricing Procedure Determination for Shipment Costs:
Based on the combination of Item category Determination group, Service Agent Procedure Group, Shipping Type Procedure Group, pricing procedure is determined
Menu Path: Logistics Execution > Transport > Shipment Costs > Pricing > Pricing Control > Define And Assign Pricing Procedures
3. Search Procedure for the PO:
TPPt: Transportation planning point is taken from the shipment document
SCTy: Shipment Cost type is taken from the shipment cost document
POrg: /Pgr/Plant: Purchasing Organization, Purchasing group and Plant is assigned to the combination of TPPt & SCTy.
On these values the purchase order is searched for the Vendor mentioned in the shipment document
Menu Path: Logistics Execution > Transport > Shipment Costs > Settlement > Assign Purchasing Data
4. Automatic G/L account Determination
I hope this information will help to you.
Thanks & Regards
Raju
From the Transaction u201CGBBu201D and combination of General Modification key u201CVBRu201D and valuation class the G/L account is determined for the posting to the freight accounts.
Menu Path: Logistics Execution > Transport > Shipment Costs > Settlement > Automatic G/L Account Determination
From the Transaction u201CWRXu201D and value of valuation class as u201C u201C the G/L account is picked for GR/IR accounts.

Restriction for Travel Expenses Type

Hi Experts,
Is it possible to restrict an expenses type not to appear for a company code?. if so what are the steps. Appreciate on your answers. Thank you

Hi Vignesh,
Sorry to say but I am not aware of any customization which restrict an expenses type not to appear for a company code.
There is a setting which can restrict Travel Expense Types based on Employee Grouping. Please go through below path.
Travel Management-> Travel Expenses-> Control Parameters for Travel Expenses-> Control Parameters from Travel Privileges-> Define Employee Grouping for Travel Expense Types
Hope this help you!
Thanks,
Vaibhav

FTXP: Mass Update US Tax Rate for procedure TAXUSJ

Hi,
I had searched here and there about the answer for the best way to mass update the tax rate for US TAXUSJ based on the jurisdiction code and transaction key (T030K-KTOSL). I attempted to use BDC recording but it doesn't work as FTXP required manual processing.
So is there any better solution on this? I am trying to direct update to database in the worst case if can't find any better solution.
In this case, I tried to find any table that consist of country code, procedure, tax jurisdiction, tax rate, valid from, transaction key. But it is none. I am confuse on which is the correct tables to update. I searched net and there are suggestions on these tables (A053, KONH, KONP, T007A, T007V, T030K, A003). But how is the linkage on these tables?Which one is the correct table to update?
Thanks for your time for reading this.
Thanks & Regards,
Sin Ying

Hi,
Please, refer to this link:
Re: Table for tax rate
Regards,
Eli

Define Flat Rate for Travel Cost based on location (Maximum points awarded)

Similar Messages

Maybe you are looking for