Depreciation Run in Ecc 6.0

Hi all,
I want to know is the depreciation run is same in ECC 6.0 and 4.6C versions? if differences is there kindly let me brief.
Points will be awarded
Regards
Raghav

Hi,
  In ECC 6.0 if there are errors no posting will be made and also the Tables will not be updated.
Until the corrections to the master data etc. are made no depreciation will be posted / updated.
(In 4.6c RABUCH updated tables when the Batch file was generated).
Note there are also due to this additonal checks made by the system in the FIAA Customising.
If you have periodic postings, these will also now be made realtime. (in 4.7 this could optionally be activated)
You will still need to run ASKB to:-
                                                      a) Check if any realtime entries could not be made/posted , if this was the case to create the posting update after correcting the cause.
                                                     b) At least once a year end so that the period area gets the status "posted" prior to closing that year.
Kind regards

Similar Messages

  • Problem in depreciation run -AFAB

    Hi,
    I hv uploaded asset balances as on 31.03.07 (FY2006) and closed the period . Subsequently, while trying to execute depreciation run in 2007 (period 1) system is giving error " year 2006 is not closed"
    while trying to run afab for period 12 in 2006 msg being thrown is " yr 2006 is closed".
    Can anyone give solution to this.
    we r i ECC 5.0 , but hv not activated document splitting.
    thanks in advance
    saibal

    Hi,
    Pls goto OB52 and open the previous period. then try dep run.
    after dep run again change period close back to normal.
    during this period change do not post any finacncial entries.
    Thanks

  • Collective document created in Depreciation Posting: SAP ECC 6.0

    Hi experts,
    We just migrated from version R/3 4.6C to SAP ECC 6.0.
    In version 4.6C, when executing Depreciation Run the system created several accounting documents (one per every cost center).  In new version SAP ECC 6.0, the system creates just one collective accounting document including all cost centers (in this way the document has a lot of lines).
    Is there any possibility to change this setting, so the system creates several accounting documents as in version 4.6C?
    We have this requirement for accounting porpouses.
    Thanks a lot for your help,

    I got response from OSS message:
    Either of these notes solve the problem:
    <<< 0000888696  Unexpected Venture Splitting on Depreciation Postings >>> or
    <<< 0001091477  RAPOST2000 creates docs with unexpected huge number of lines >>>

  • Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

    Hi
    We are upgrading from 4.6c to ECC 6.0.  In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type. 
    While executing depreciation run, it got terminated and I have done the above changes.  After that I have restarted the Depreciation.  I have got the following error Message.
    Message(s) during check of document ERROR00001
    Message no. AAPO511
    S:/SAPDMC/LSMW_AUX_020:006 20
    Message no. /SAPDMC/LSMW_AUX_020006
    If any body aware solution, kindly reply to this message
    Thanks
    siva

    Check this useful links
    Key differences between SAP 4.6 - ECC 6.0
    http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
    LE/WM functionality difference between 4.6c and ECC 6.0
    differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

  • Depreciation Run - Amounts mismatch

    Experts,
    I just ran the depreciation run for all the assets in a Co Cd, which created a document. The document currency, Local Currency and Group Currency for this Co Cd is all USD - However, when I checked the document posted by depreciation run, the Group Currency amounts are different from the LC and DC/FC amounts.
    I checked the OB22 setting and it looks ok - The Exchange rate used is same for determining LC and GC.
    Can someone let me know how this can be corrected ?
    All answers/thoughts/inputs/views will be duly appreciated and rewarded with points.
    Thanks,
    Nandita
    PS - We recently upgraded to ECC 6.0 (technical upgrade) from 4.6B

    Hi Nandita,
    the mismatch amount will get because of " % change or depreciation key change for asset".
    so u have to run AFAR ( recalculate depreciation). for diff amount.
    Regards,
    R.N.Reddy

  • Depreciation Run - Amounts mismatch in Doc

    Experts,
    I just ran the depreciation run for all the assets in a Co Cd, which created a document. The document currency, Local Currency and Group Currency for this Co Cd is all USD - However, when I checked the document posted by depreciation run, the Group Currency amounts are different from the LC and DC/FC amounts.
    I checked the OB22 setting and it looks ok - The Exchange rate used is same for determining LC and GC.
    Can someone let me know how this can be corrected ?
    All answers/thoughts/inputs/views will be duly appreciated and rewarded with points.
    Thanks,
    Nandita
    PS - We recently upgraded to ECC 6.0 (technical upgrade) from 4.6B

    Can u plz provide the ob22 company code settings.

  • Depreciation run issue.......

    Hi,
        I am trying to re run the depreication as it calulated wrongly for last 2 months. Now when i am executing it through AFAB T.code, it is giving me an error that posting period is not open for period 1. Our fiscal year start in Oct and ends in Sept. I checked the OB52 settings and there it is shoiwng that currently period 3 is open.
    So is there any other way through which i can re run the depreciation posted. I don't think business will agree to open the closed period.
    Please suggest.
    Regards....

    Hi
    To post an acconting document in a particular period, that period should be opened. And in case of depreciation run also, accounting document is generated by the system. So it's necessary to open the period to execute depreciation.
    Otherwise you can correct the incorrect depreciation in current period if it's ok as per your management.
    Rajib

  • Error while running Depreciation Run in FIXED ASSETS

    Hi All,
    When i am running Depreciation program for any book in FIXED ASSETS (R12.1.3), I am getting following error...
    FADEPR module: Depreciation Run
    Current system time is 19-OCT-2011 17:59:42
    Depreciation Program Exception Report
    APP-FND-01564: ORACLE error 6550 in FADEPR
    Cause: FADEPR failed due to ORA-06550: line 1, column 32:
    PLS-00302: component 'FAZCBCSOB' must be declared
    ORA-06550: line 1, column 14:
    PL/SQL: Statement ignored
    The SQL statement being executed at the time of the error was: and was executed from the file .
    Can any one help on this please.
    Thanks,
    Naveen Kumar.P

    Please see (Depreciation Fails with Error :PLS-00302 and ORA-06550 [ID 1094183.1]).
    Thanks,
    Hussein

  • Repeat depreciation run can change cost center in GL a/c or not?

    Hi Gurus,
    I have hit the following issue.
    Fixed Asset 1 originally assigned to CC-01 for month of March.
    And my user has run depreciation for March already.
    Later she changed cost center to CC-02.
    Then she repeat depreciation run for the month of March, from the depreciation result shows the new cost center CC-02.
    But there is no document generated and thus from corresponding GL account, there is no change, still point to CC-01.Which means CC-02 has not been posted to GL account yet.
    May I please know if repeat depreciation run can change cost center in GL a/c or not?
    If cannot, what should be the correct way to post the new cost center in GL?
    Thanks a lot.
    Best Regards
    Li Juan

    Hi, I have tried the method you mentioned.
    I managed to generate the new document (Message shows: Document is posted under number 7500000000).
    So can I say that repeat depreciation run cannot change cost center for corresponding cost element?
    Everytime user has to do manual posting.
    Thanks a lot.
    Rgs
    Lijuan

  • Depreciation run in 2007- batch posted in 2008.Csq: Can not close FY07

    Hi SAP Guru,
    My client has an issue with a depreciation run of 12/07 posted in 12/08. FY=calendar year.
    How can this be solved since a depreciation run CANNOT be reversed.
    They created an extra asset acquisition in dec 2007 but forgot to run depreciation program in repeat mode before closing period 12/07 in GL. Now end 2008, they couldn't closed FY07 in AA because depreciations were not completely posted. They executed the depr run in repeat mode for 12/07 but manually changed the posting date to 31/12/08 in the batch.
    How can this inconsistency between GL and AA be solved now?
    My idea is to change the asset key to 0000, execute the posting run of 12/07 in a repeat mode again and post it like they did on 31/12/08. This will create two inconsistency but with opposite signs.
    Then reopen 12/07 in GL and again post the depr run in repeat mode but with correct posting date.
    But I'm not sure this would work... Please advise? Any other solution would be higly appreciated!
    Many thanks!
    Stephanie

    Hi Tom,
    Thanks for the quick response!
    I am glad to hear that the log level is the reason for the output and not an issue with the broker!
    Thanks again....
    -Howard

  • Depreciation Run executed for a period but no posting found

    Dear Experts,
    I have checked a few of the FA in the Fixed Asset Master, and confirmed that they have not been depreciation run yet for period "2009-02". My current period is set to "2009-02" as well.
    But when I tried to run depreciation run for "2009-02", I always get no posting.
    What could have cause this problem?
    Much Thanks in Advance!
    Warmest Regards,
    Chinho

    Hi Chinho,
    1, please make sure there is APC value for the asset. Means:
    acquisition was created for the asset. You can check it from FA master data->document tab
    Or the asset was imported into system with a APC value.
    2, If the acquisition/import was done before current fiscal year, please make sure 'fiscal year change' to current fiscal year was done.
    Regards,
    Ivy Zhang
    SAP Business One Forums Team

  • Error in depreciation run - assets under construction

    Hi!
    Could someone please help me with the following:
    My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
    1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
    2) Executed depreciation in background.
    3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
    4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
    5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
    6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
    Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
    Please help!
    I am very thankful for any help!
    Many many thanks in advance!

    Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
    with regards,
    Prabhakar

  • Project Code to be included in Depreciation run

    Hi Friends,
    Previously, the Cost Center was mandatory for all assets. Now, they want the depreciation to flow to either a cost center or to a project code. In accordance with the requirement, I had made Cost Center optional, along with Maintenance Order. Previously Cost Center was mandatory and Maintenance Order was not shown in the asset class master data configuration screen.
    Hi Friends,
    Find below the description of the issue faced.
    Previously, the Cost Center was mandatory for all assets. Now, the depreciation HAS to flow to either a cost center or to a project code. In accordance with the requirement, I had made Cost Center optional, along with Maintenance Order. Previously Cost Center was mandatory and Maintenance Order was not shown in the asset class master data configuration screen.
    Further, there was a validation which checked that each asset master had a Cost Center field filled in and a substitution which filled the Cost Center field with a default Cost Center. I have changed the validation to reflect that either a Cost Center or a Maintenance Order is filled in. I have modified the Substitution to reflect either a Cost Center or a Maintenance Order.
    Before the above changes were made, the Depreciation run was being executed without any error. After the above changes were made in the system, the Depreciation Run is ending with an error "Account 551100 requires an assignment to a CO object - Message no. KI235"
    Even prior to the error, the Default Account Assignment tab in the relevant Cost Element was empty.
    I have checked the Field Status Variant and Cost Center is only optional in that.
    Can you suggest any further config. settings that have to be changed? Two SAP Notes, ‘827363’ and ‘98778’ have suggested patches, which have already been applied to SAP.
    Regards,
    GV Shivakkumar

    Answered .thanks

  • Depreciation run with special period

    We require 2 set of FS reports:-
    1.) FS as at 14/12/2007
    2.) FS as at 31/12/2007
    We have use the following period to derive the the reports
    1.) Period 12 (Transactions 1st - 14th Dec 2007)
    2.) Period 14 ( Transactions 15th - 31st Dec 2007)
    Q1.)Should Dec depreciation run on period 14?
    Q2.) If yes, will the depreciation run capture the depreciation from 1st - 31st Dec 2007?
    Q3.) We have tried to run Dec depreciation in period 14 but error "According to the posting cycle, you should post period 012 next."
    Pls advise
    1.) Steps to run Dec 2007 depreciation in order to capture the whole month depreciation.
    2.) Which period to open in OB52.
    Kindly assist as this is urgent. Points will be rewarded. Thank you

    Dear Hari,
    Thank you for the helpful points. Rewarded.
    FYI, our cut off date is 14th Dec 2007. Any transactions after this date will go to period 14. In OB52, we set only period 14 open to block user from posting to other periods. Will this affect the depreciation run (given scenario where we run AFAB for period 12)?
    When we run AFAB for period 12, this is the error we get:
    Period 12 is not allowed
    Message no. F5567
    Diagnosis
    The period entered (12) is different from the period calculated (14) and is also not in the interval for special periods (013 to 016).
    System Response
    Error.
    Procedure
    Correct the value entered for the posting period.
    What shoud we do?

  • FI-AA : Problem in Depreciation Run and Year end closing.

    i am doing asset year end closing and new fiscal year open, i followed the steps as followings..
    Step 1 Did depreciation run using T-code AFAB- no error
    step 2 checked depreciation run in AFAR was correct(no error)
    step 3.did actual run of new fiscal year open using tcode AJRW.
    step 4 : did actual fiscal year closing t-code AJAB.
    but now the problem is still i am not able to see any asset reports when open the report meg. says "fiscal year change not done for company code xxxxx"
    problem due to  is any patch need to be executed? or due to any other application error?, pls advice to solve this my issue.
    with best regards,

    Hello
    Choose Periodic processing ® Fiscal year change.
    Enter the company code and the new fiscal year.
    Choose Program ® Exec. in background.
    Process the assets with errors that were identified during the fiscal year change (Tools ® Assets with errors).
    Reg
    *Assign points if useful

Maybe you are looking for