Distributed compile distribution issue

I have two computers: an iMac G4 17" 800 MHz machine that I use as my primary computer, and a PowerMac G4 450 DP. I would like to use both machines when compiling. However, when I enable distributed build in Xcode on my iMac and "share this machine for building" on my Powermac, while it distributes the build to the PowerMac just fine, it no longer does any building on the iMac. This is obviously less than ideal, as it means fully half of my processing power is sitting idle, not to mention the build being run on the less powerful (sort of) of the two machines. What am I doing wrong? how can I get Xcode to use both machines for the build? Thanks.

Two additional things to check.
1. Make sure both machines are using the same version of gcc.
2. Make sure the iMac isn't sharing.
If you're still having problems, ask your question on Apple's Xcode mailing list. Apple engineers hang out on the mailing list more than they do here. They know the most about the inner workings of distributed builds.
  Mac OS X (10.4)  

Similar Messages

  • CCA planning price distribution issues

    Hi Gurus,
    When we do cost center planning using KP26 it suppose to distribute the prices equally for all the periods based on distribution key. In this scenario we are using the standard distribution key 2 and the values are not distributed equally and it's happening only for few cost centers and not for all of them. I have verified the master data for the cost centers which are having issue and don't see any issues with master data. I am really wondering what can be causing this issue.
    I appreciate your help
    BR.

    Thanks Adi but user is saying he never inputted the planning date for 6 months and there is no way I can prove that. I did some testing and this is what I found. If we input the plan data for 6 months and if we try to view the same plan data for 12 months then system sets up different price (not the amount we entered) for previous months and it's going to default the price we entered from current month onwards.
    Thanks
    BR

  • Content distribution issue with message "Found package properties updated notification for package '00000123'"

    I've got strange issue with 1 of my primary sites that started just recently.  I've updated the content of 1 package and this now needs re-distribution to all DPs.  I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
    updated correctly.  One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
    Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==> 
    Checking Pkgxfermgr.log does not show anything either,  I've tried with 2nd application but again the same result it only shows the the notification message.
    I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
    does anyone have idea what this could be, suggestions are welcome.   Thx.

    Jason,  I've checked the flow from the CAS down to the primary below is quick overview.  The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
    1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
    CAS (Located in the US EST Time zone)
    Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
    sender.log  11:30am all 3 primary sites have received the content.
    C00 (Primary site in Singapore having the issue)
    distrmgr.log 11:27pm received notification of the package
    despool.log   11:32pm packaged content extracted successfully
    distrmg.log started to see message Found notification for package '000008B7' and followed by next message
    Package '000008B7' (priority 2) is already in queue.
    This goes one until 1:21am (Singapore time)
    Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
    The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
    Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
    Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
    STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
    ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
    After that nothing anymore.
    When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
    To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
    This is first time I see this issue.

  • VPP Distribution issues with OSX Server Profile Manager

    Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

    Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

  • Distribution issue

    Our business is Distribution. some times from our stock we use to send the material to customer and get it replaced by our vendor A for free. The issue is excise invoice. Our Vendor A does not give Excise invoice at the time of free replacement. We tried using a free replacement invoice and using the same excise to take the stock into sap using 511 movement. But, the issue is that cost impact in finance is missing. Could you please suggest an alternative method?

    can any one  reply...

  • Document Distribution Issue.

    Dear All,
    We have set of End users who are authorized for various types of Document Types.
    Suppose End user A is authorized for Doc types: IRR, IRC, IRP e.t.c.
                   End user B is authorized for Doc types: GRR, GRC, GRP e.t.c
    Now End user "A "has Distributed  "Released" Document type "IRR" to End user 'B'. But End user is unable to open the Document,bcoz he does'nt have authorization for the same. We can't authorize him for the same Doc type 'IRR' or create any role for him.Becoz in future so many pepole can request for Doc, but we can't create individual role for them to authorize.
    My issue is what settings can we make to authorize End user 'B' to view the Doc type 'IRR' based on his request.
    We have also tried 'ACL'(Access Control list) but the problem is when DIR is having status "RL" it doesn't accept any changes.
    Means when I try to feed End user Name and activity as a only "Read File" system proposes a message changes are not allowed with Doc type "IRR" and with Relased status "RL".
    Can somebody guide me on this issue.
    with regards,

    Hi,
    based on the mentioned error message number I think that this is not comming from the ACL entry but from a DMS authorization object which prevents this user from editing document info records of type IRR which have currently status 'RL' assigned.
    I think the best way to check the permission checks would be to execute an authorization trace in transaction ST01. The result of this trace should show which auth. objects are checked and where maybe an error is raised.
    Best regards,
    Christoph

  • Acrobat X fill in form distribution issue

    I created a fill in form in Acobat X for MACs and twice attempted to distribute the form to 32 recipients using my Acrobat.com account.  The distribution seems to stall while "sending".  The form does not show up on my Acrobat.com account nor were the forms distributed.  Suggestions?

    LiveCycle Designer Forms are very different from Acrobat Formtool forms.
    If you have a LiveCyle Designer form, then you need to create a master page and save as a dynamic form.
    There is a different forum for LiveCycle Designer under Adobe Forms.

  • Automatic Content Distribution issues

    Hi I am trying to test On Demand Content distribution in my environment and its not working. Feel like I am missing something obvious. Also I read over this article:
    http://blogs.technet.com/b/neilp/archive/2013/01/03/on-demand-content-distribution-fallback-distribution-points-a-2012-configuration-manager-micro-depp-dive.aspx
    My 2012 test environment:
    1 Primary site with co-located DP (Subnet in BoundaryGroup1)
    S01 (Secondary site 1) with co-located DP (BoundaryGroup2)
    S02 (Secondary site 2) with co-located DP (BoundaryGroup3)
    Only one subnet and one DP is assigned/member in each Boundary Group.
    All my packages are set to ‘Distribute the content for this package to preferred distribution points’ and fallback is NOT enabled on the deployments
    TestPackage1 is currently deployed to Primary site and S02 DPs. I have a client being managed by S01 and want to download TestPackage1. In the cas.log and execmgr.log it states No DP found with the package and deployment fails. The deployment is set for "Available".
    When I look at the distmgr.log on both Primary and S01 I dont see a DMB file created and package is never deployed to the S01 DP.
    Thanks for the help.

    Can you please zip mp_location.log and distmgr.log on site S01 to SkyDrive? I need to take a look at there logs.
    Suspected causes:
    1. The instruction file has not been dropped by MP.
    2. The instruction file has replication error.
    Juke Chou
    TechNet Community Support

  • Compilation CD Issues

    Good Day,
    I'm running into issues with iTunes and my compilation CDs. For example, if I have a soundtrack from a movie, it will show each song separately. I read through some forums and tried the "fix" for it. It goes as follows:
    1. Start by finding the album you want to modify. I like using iTunes' browser. You can open it by choosing View > Show Browser.
    2. If you are using the iTunes browser, albums appear in the right hand column. You can trim down your album list by selecting a genre from the left column, and an artist from the center column.
    3. Once you select the album you want to modify, choose File > Get Info, or use the Command-I keyboard shortcut.
    4. When you select more than one song to edit - in this case by selecting an entire album - iTunes checks to see if you really want to edit the settings for multiple tracks. Click the Yes button to dismiss the dialog window that says Are you sure you want to edit information for multiple items?
    5. If you are tagging an album as a compilation, choose Yes from the Compilation pop-up menu.
    6. Click OK.
    Even after doing this, it's not going to a "compilation" CD. Is anyone else having this issue? Any help would be great. Thanks!
    Regards,
    Brian
    Dell Laptop - Dual Core Windows XP Pro
      Windows XP Pro  

    This worked for me. Are you highlighting/selecting all the songs before doing this step?
    3. Once you select the album you want to modify, choose File > Get Info, or use the Command-I keyboard shortcut. <</div>

  • Vertical distribution issue

    I have a gant chart I'm working on. Each bar is the same height. There is text within each bar (actually on top of, but smaller than the height of the bars). I grouped together each "label" and bar separately. Then I try to distribute them vertically evenly... and the bottom 4 do just that... but the top one is much higher (further away) from the other four. I can't figure out why. I made sure nothing weird was grouped with the first bar. Nothing is. Any ideas? Thanks so much.
    julie

    Julie,
    Sometimes, Illy gets confused, and it may be in different ways.
    I believe we have never heard of this way, but you may try some of the things on the following general list of increasingly laborious/unpleasant actions.
    Obviously, you will need the actual issue to check.
    You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder http://www.bugge.com/Family-and-friends/Illy/illy.html (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);  Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Xcode Distribution Issue

    I have exported & imported my developer profile into Xcode.
    I have rectified the Bundle ID.
    I cannot get this App to get into distribute mode.  Can someone please help me?  This is my first time submitting an app and it is starting to get frustrating.
    If I go through Application Loader, I continue getting the error message "ERROR ITMS-9000:  “No.app bundles found in package”
    Thanks,
    J

    The script editor(s) keep track of how you capitalize your identifiers, and once created, it will use that even if it is wrong. There are a couple of techniques I've had success with - both start with closing the editor(s). You can then either edit the script text file with a text editor such as TextWrangler and reopen the corrected file in the script editor, or use a newly launched script editor to make your changes in the script before compiling it.

  • Form Distribution Issues

    I have two related issues regarding the distribution function in Arobat 9.0.
    We have an order form with a "submit by email" button on it. Myself and a co-worker, Leon, are responsible for completing that form for each order. I created the form in LiveCycle and with Acrobat 9.0, used the distribution function to send it to Leon and myself. I sent it to automatically collect the data on my own server.
    When I take an order and click submit, it doesn't go through the email process, Acrobat just notifies me that the message was sent and the order database is updated with Adobe Tracker. When Leon clicks submit, he has to go to the email process.
    Question 1: If I were to, and can I, move the collection folder that I originally set up on my own server to a common server that he and I share, would he be able to then skip the email process?
    Question 2: He only has the Adobe Reader 8.0, whereas I have the full program. How does this affect his ability to fully take advantage to the distribution and collection process?
    Thanks!

    We have a solution that allows you to do most of what you want, including bulding the form, having people fill it out either in Reader (as an XFA-PDF) or on the iPad (as an HTML form).
    You design the form once, and it will by styled correctly on the appropriate platform.
    For more information, check out these links:
    http://www.avoka.com/blog/2012/02/style/
    http://www.avoka.com/content/avoka/en/products/sff3/smartform-composer/features_and_demos. html
    http://www.avoka.com/content/avoka/en/products/sff3/avoka-smartform-factory.html

  • JDBC application distribution issue?

    My application use an ODBC entry to access a database. Should I create this
    ODBC entry for each client if I distribut the applet?
    Also, if the odbc is using file database system, such as Access, how to
    enable client JDBC access the access file on remote server?
    I used 3rd part java class (bean). is it possible to compile the bean into
    the applet so i needn't install the class on every clients' machine?

    My application use an ODBC entry to access a database.
    Should I create this
    ODBC entry for each client if I distribut the applet?
    Also, if the odbc is using file database system, such
    as Access, how to
    enable client JDBC access the access file on remote
    server?
    I used 3rd part java class (bean). is it possible to
    compile the bean into
    the applet so i needn't install the class on every
    clients' machine?you cannot compile the bean into the applet but you can archive the applet class and the bean class into a jar file and download the whole jar file at once. it will be much faster. A bigger problem is your data access. an applet cannot access an odbc driver on the local machine. you must use a type 3 or type 4 driver. remember an applet is limited to what it can access on the local machine.

  • Error while distributing a distribution model in BD64

    Hi,
    I am trying to send an IDOC from one client to another client of the same SAP system. To achieve that, i have created the necessary logical systems and made the necessary partner, port configuration as well as RFC Destination. In BD64, I have created a new model and added a BAPI 'SAVEREPLICA' and Object 'BUS1093' using Add BAPI button. But when I am trying to distribute the model it's giving the following error - 'Model view ABCDX has not been updated.  Rreason: Distribution model is currently being processed'.
    Kindly help,
    Thanks in advance,
    Deep.

    Using of BAPI is not accepted between two clients of the same system, you'll have to use different SAP systems

  • R12 compile fliexfield issue

    Hi;
    I have r12 (12.0.6) instance on aix,i took its clone and after clone process fliexfields(DFF_KFF) can be invalid? As i know in r11 there is opton for compile fliexfiled in adadmin utulity. In r12 how i can compiled fliexfiled (DFF-KFF) which is become corrupted or Invalid
    Thanks alot

    Hi,
    Compiles flexfield data structures in Oracle Application Object Library (FND) tables. Choose this task after you apply a patch that changes the setup of flexfields. Patches usually indicate when you should perform this step.
    Flexfields automatically compile data when you use them for the first time, so running this task is generally not required. However, compiling flexfields at a specific time can alleviate potential runtime performance issues. For example, you may choose to compile them when system usage is known to be low, rather than automatically on first use.
    Oracle Applications Maintenance Utilities
    http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admu.pdf
    Regards,
    Hussein

Maybe you are looking for