Domain name monitoring

Hello,
I am looking around for domain name monitoring service, whereby i can get an alert for any new domain registration that contains a specific word. ex. the word spiceworks - myspiceworks.com, spiceworkssoftware.com
I found
https://research.domaintools.com/monitor/brand-monitor/
https://www.cscglobal.com/global/web/csc/domain-monitoring.html
Do you have other good suggestions?
This topic first appeared in the Spiceworks Community

Make sure you run the config script (config.cmd or config.sh) that is in %MIDDLEWARE_HOME%/Oracle_ECM1/common/bin/ directory as opposed to the standard creation wizard. This runs the Domain Creation Wizard with a different set of settings so that the jython script that runs the WLST commands at the end doesn't fail. If you are on windows and using the shortcut it is under Start -> Programs -> Oracle ECM 11g - Home1 -> Configure Application Server. One of our other guys had an issue where the "start in" entry for this shortcut was wrong as well. On mine it is %MIDDLEWARE_HOME%/Oracle_ECM1/install/bin.
http://kr.forums.oracle.com/forums/thread.jspa?threadID=1083661

Similar Messages

Windows 8.1 will not issue a Domain Name Request.

I have a windows 8.1 system that will not issue a Domain Name Request to resolve a simple query such as www.microsoft.com. It works OK in my Windows 7 system on the same computer. I know this is happening because I run the Wireshark packet
trace on each system. Windows 7 issues the request; Windows 8 does not. I can flush the DNS cache with "ipconfig /flushdns, net stop dnscache, net start dnscache". When I try to do email, Thunderbird can't find the server; when
I try to browse the internet, the browser(Opera, Chrome, Mozilla) can't resolver the name. ipconfig /all looks normal. The Domain Name Server is hardwired (8.8.8.8, 8.8.4.4, or 208.67.222.222, 208.67.220.220). Any ideas?

Hi,
If you ping the server with its IP address, could it work? If so, it should be your Windows 8.1 DNS components problem.
When this problem occures? If this problem just occures recently, it would be better to make system restore to revert your system to a former normal time point.
In not, firstly, try to reinstall NIC driver for test. Also check Event Viewer if it identify the problem.
As you said, you run Wireshark Packet. In my opinion, it would be better to run this tool to capture you network communication trace in Windows 8.1. This maybe could help you find the reason of the problem.
In addition, Network Monitor also a good choice to captuer network trace.
Roger Lu
TechNet Community Support

Nodemanager doesn't display the domain name

Hi
Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
First i invoked the wlst.sh shell script
then i started the nodemanager by using startNodeManager command
Then i tried to connect to nodemanager through nmconnect
Now if i type the command nm() it displays the following
Currently connected to Node Manager to monitor the domain {0}.
It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
Can you please let me know what is that iam missing.

To ask Apple to fix this, you need to repost it at
http://www.apple.com/feedback
If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin. But it could also be a simple oversight.
Each browser may be different: Do Firefox and Chrome behave the same?

Why is most of the URL address, except for the domain name, in gray font? It's difficult to read. I would like to make the entire address font in black

[http://pics.livejournal.com/tersa/pic/006gzfsf Screenshot of the behavior]
Before I upgraded to Firefox 6.0, the URL address was displayed in black text.
After upgrading, it is now displaying only the core domain name (e.g, mozilla.com) in black text, while any extra text (like, https://support. ) is grayed out.
It is very difficult to read this gray text on my monitor. I'd like to make it so that the entire address is displayed in black text, but I couldn't seem to find any kind of configuration setting under Options to change this.
Please let me know if I can modify the URL display to be all black again.

That is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to make the entire URL dark.
Change a preference:
#type '''''about:config''''' in the Location/URL bar and press Enter.
#if you see a warning, accept (promise to be careful)
#Filter: '''''browser.urlbar.formatting.enabled'''''
#in lower panel, double-click that item to toggle value to '''''false'''''
I am not sure whether or not you need to re-start Firefox after doing the above for the change to take effect. Test and if it does not work, then re-start Firefox and test again.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

Old Domain Name showing in User Profiles

Sharepoint User Profile Sync is showing some users with our Old Domain name (from years ago). This domain name is NOT in our Active Directory. I'm guessing that the profiles that show the old domain name must have been in our Sharepoint
2007 and got ported over when we upgraded to Sharepoint 2010.
This is causing conflicts and some workflows not to work (ones where its looking up a user's profile). And when I look in Microsoft Forefront Identity Manager, there are some users listed with this error: Exception while trying to migrate user "abc\johndoe"
to "xyz\johndoe".. Microsoft.SharePoint.SPException: The user does not exist or is not unique.......
("abc" being the old domain name...and "xyz" being our current domain name)
I'm wondering what is the best way to get rid of the old domain name in our Sharepoint 2010 user profiles? Should I update them in the User Profile database in SQL?
Does anyone know how to fix this?
Also, in Central Admin under Health monitoring, we have this message
"People search relevance is not optimized when the Active Directory has errors in the manager reporting structure. In Active Directory, only company leaders should have the 'manager' property set to NULL. As a result of errors, the Active Directory can
incorrectly have the 'manager' property set to NULL for other users that can cause a decrease in people search relevance. By specifying the actual leaders of
the company, these inconsistencies are not taken into account and the relevance problem is corrected.
Remedy
Specify the company leaders explicitly. Use the following PowerShell
commands: $upap = Get-SPServiceApplicationProxy [appid]; Add-SPProfileLeader
$upap [Domain]\[UserName]. Run 'Get-SPProfileLeader $upap' to check whether the
leader was successfully added. As a last step, run a full crawl on the content
source containing the start address (URL) of the user profile application.
Not sure if this is related.
Any help would be much appreciated... thanks!

If Mysite Clean Up job is running then this issue should be fixed(removed all old profiles) in couple of User Profile Sync( Full followed by couple of Incremental). Basically, FIMs
responsible to mark the user as deleted within the UPA then CleanUp Job purge these profile.
http://www.harbar.net/archive/2011/02/10/account-deletion-and-sharepoint-2010-user-profile-synchronization.aspx
How many users you are seeing, are they showed in the Profile missing options? if less numbers then you can simply remove the IDs from USer Profile manually.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Connection Errors to Remote Desktop from OSX after Domain name change

We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

Change domain name clients and server

Hello,
I want to change the domain name from eg ".vancouver.gov" to ".vancouver.local" on all of our devices in the network. Zcm has been installed with ".vancouver.gov" and the clients also are registered with ".vancouver.gov". When i change the domain name on the workstations and change the corresponding dns entries of the workstations to ".vancouver.gov" i cannot register workstations anymore and wol does not work anymore. Distributing applications to the workstation does work.
Anybody now how to accomplish this change.
We have about 400 workstations and 1 zcm 10.3.3 server.
Thanks.
Ren

I would recommend an SR.
Changing the DNS of Devices should not impact any of that, so long as
the clients can still properly resolve the servers and you are not
destroying the old DNS zone.
This may indicate that the CA/Server CERTs do not have the fullied
qualified DNS name of the server but perhaps just the short name.
Also, I would not recommend attempting to fix any certs right away, but
rather using the "Additional DNS Name" setting on your server, since
changing a Cert could cause lots for work on client PCs.
Later versions of ZCM make changing server certs a little easier but for
10.3.3, I would just use the server setting instead of a change.
But since I suspect you can create an SR as most government accounts
can, it may be simplest to go that route but keep my thoughts avoiding
any cert rebuilds in mind if there is any issue with the names in the
server cert.
On 6/4/2012 11:16 AM, rengelha wrote:
>
> Hello,
>
> I want to change the domain name from eg ".vancouver.gov" to
> ".vancouver.local" on all of our devices in the network. Zcm has been
> installed with ".vancouver.gov" and the clients also are registered with
> ".vancouver.gov". When i change the domain name on the workstations and
> change the corresponding dns entries of the workstations to
> ".vancouver.gov" i cannot register workstations anymore and wol does not
> work anymore. Distributing applications to the workstation does work.
>
> Anybody now how to accomplish this change.
>
> We have about 400 workstations and 1 zcm 10.3.3 server.
>
> Thanks.
>
> Ren�
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

How to change (NT)Domain Name after installed ERP?

Hello,
We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
However, we do not have enough time and budget for doing that.
Questions:
1). If the (NT) Domain name will be changed, we only need to change the
OS users of service for SAP-System?
(I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
2). The method of only changing users of SAP-service is not supported in this case?
(The customer will be not taken the SAP-Official support after doing that?)

Dear
Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
You will probably not get support by SAP after you change the domain name once system is live.
There are a bunch of changes you will need to perform as well.
The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
You will need to update those entries at Oracle level.
SAP parameters containing domain name
Java environment where domain name is contained
Reset hostname buffer
Service marketplace
SAP Logon
STMS
Monitoring perhaps, non SAP job scheduling
Please reward points accordingly
Kind regards
Tom

Is it possible to restrict the ability to e-mail a pdf outside a specific domain name?

Hello,
I am trying to find a solution to a friends problem. She has a quarterly publication that she sends out to big banks and financial institutions. Recently she has had some problems with press leaks. I am trying to find some security options for her however the task is difficult. Because these institutions have firewalls I am not sure encrypting or tracking is the right answer because the publication might not make it through. She wants users to be able to print the publication because many of the readers are older and prefer to read during their commute and at home. Essentially I am looking for any ways to make readers think twice about sharing the information. I thought if I could restrict e-mail to a specific domain name that would help this way users can only e-mail within their specific company. If any one has any suggestions please feel free to share.

Thank you Todd, I was able to get it to work but I do have a few more questions...
1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
(It was actually much longer than that)
Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
Thanks,
Evan

Postfix relay=none, ... status=deferred (Host or domain name not found...

Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
Elle

Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

Application is not working when changing of oracle server domain name

Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.

Mohd khalid wrote:
Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.I am really confused that what's not working? What I have understood is that you recreated the EM repository. So where does "some of the future not working like date,etc." come into it? Are you checking date from EM ? Which application is not working, your application or EM or both or somethingn else? Tell us the complete version, error information and also post the output of
emctl status dbconsoleHTH
Aman....

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Reverse proxy to applications on a server by just domain names possible?

Hi All
I am looking for a solution to set up a single server, that hosts four J2EE web applications running on a Glassfish application server with just only one IP address.
When a user wants to use an application, he/she can just type URL without specifing port and path, and the corresponding web application will be displayed accordingly as shown below
http://sub1.domain1.com -- > webapp1 at port 9100
https://sub2.domain1.com -- > webapp2 at port 9200
http://sub1.domain2.com -- > webapp3 at port 9300
https://sub2.domain2.com -- > webapp4 at port 9400
I am wandering whether I could use reverse proxy of Sun Java System Web Server 7 to route the traffic from the domain names to their own application on Glassfish as shown above? I tried by creating two HTTP listeners to listen at port 80, and 443 respectively, but I could not access different applications based on domain names without specifying specifix path or port.
Is there any recommended resources or example of the mapping, or any other suggested solution?

Thank you for your reply nsegura. I created 4 different virtual servers as you suggested and it worked :)
However, I have a problem in reverse proxy base on path.
The scenario is below
I have an J2EE application that needs to be deployed in three different environment (production, training, testing). It
is the same application for three environments, so I want them to have the same context-root. I want to use Sun Web Server 7.0 to reverse proxy to the application in each environment based on path, not URL redirect. Example of URL are shown below
https://sub.domain3.com/app -- > http://localhost:9500 (with context-root /app)
https://sub.domain3.com/training/app -- > http://localhost:9600 (with context-root /app)
https://sub.domain3.com/testing/app -- > http://localhost:9700 (with context-root /app)
So far, it works if I set context-root of the application in each environment differently
https://sub.domain3.com/app -- > http://localhost:9500 (with context-root /app)
https://sub.domain3.com/training/app -- > http://localhost:9600 (with context-root /training/app)
https://sub.domain3.com/testing/app -- > http://localhost:9700 (with context-root /testing/app)
I am wandering whether there is a solution with Sun Web Server 7 that I can use to achieve reverse proxy of the same application in different environments without having to modifying context-root for each environment and use URL redirect?
I was thinking about using rewriting path with reverse proxy, but I did not see this function under reverse proxy tab.
Any ideas?

How do I use my own domain name with Mac server with iWeb

For a number of years I have had my own domain name that when typed into a browser it would redirect the browser to my site on the .Mac server. I hear with iLife ’08 I can have my own domain name hosted by .Mac so I know longer have to have the long addresses for each pages the I have now for my site (i.e. the http://web.mac.com/thewildhearts/WildheartPhotography/NatureGalleries.html). How do I go about getting my domain name (wildheartphotography.com) so that Mac will host it and do I need to notify the current host that Mac will be hosting my site now?
Thanks. I really appreciate the help I get from this forum.
Pat

It's very easy, really. You go to your domain control and redirect the address. IPower, for example points the domain name very easily: you just type in the URL of your site and it will point to your mac server.
I've used GoDaddy before and it is a bit more difficult to "point".

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

Domain name monitoring

Similar Messages

Maybe you are looking for