Down payment Receive at Sales order Level

Hi....is it possible to receive customer down payments against sales order line items?
please provide me the steps to configure this,
Thanks
Prathima

Hi,
U can fulfil ur requirement by using milestone billing process, where u assign billing plan to the sales document type, by which in the salews order u will get an additional tab BILLING PLAN, by using this billing plan u can design ur requirement with the use of billing block option.
Regards,
Ravi Duggirala

Similar Messages

Customer Down payment clearing during sales order

Dear all,
I have create a customer down payment via tcode F-29.
now, i want to clear this down payment along with sales order.
ex :
day 1 : customer pay advance 10
day 5 : customer buy item with amount 80 (cash sales)
can we deduce by down payment 10 during invoicing process then receipt 70 only.

But my document is not having any clearing documents and it can't be reset by FBRA, these documents get posted by mistake , while debugging from SD side , so any idea on it ?
Thanks
Deepak

Down Payment processing for Sales orders using Milestone Billing Plan

Hi,
The business scenario is as follows.
The delivery for the sales orders are to be created only after the pre payment( a percentage of the total sales order value) is made by the customer.
Hence the sales orders while creation are blocked for delivery creation using credit block by means of a userexit.
The credit manager checks the blocked sales orders using VKM1 transaction and verify if there are any payments made by the customer to cover this pre payment to be made.
If it is enough to cover then he releases the sales order manually for delivery creation.This is a complex process since there are too many sales orders and the payments made by the customer may not match the amount to be paid(it can be greater or lesser).The customer just pays a huge amount which is to be distributed among the sales orders for pre payments.
Later, when the invoice is created, the customer account is cleared manually using F-32 transaction for the oldest open invoices.
Here again there is a huge manual effort involved since he need to distribute the amount against the invoices using oldest open item principle.
As a solution we are planning to implement "Down Payment processing for Sales orders using Milestone Billing Plan".
Is this the right solution?
Can you please give the steps in detail to implement this functionality for above scenario?
We are using SAP 4.7 version without Project Systems.
Thanks in advance.
Regards,
Ragesh

Hi Ragesh
Check the links where you will get the entire down-payment configuration
[https://forums.sdn.sap.com/post!replydownpayments ]
Regards
Srinath

Down payment issue against sales order

Hi
I have some down payment of 100000 and it is to be executed in 20 parts against a sales order. there was some error in the payment processing and while debugging we have posted some five of above payments as cleared although there was no clearing documents aginst these five. Now my balance due is giving incorrect amount. I want to move these wrongly cleared item in uncleared list, reversal can't be done as this is having other 15 parts.Any best way to reinstate mentioned 05 parts as uncleared.
Thanks

But my document is not having any clearing documents and it can't be reset by FBRA, these documents get posted by mistake , while debugging from SD side , so any idea on it ?
Thanks
Deepak

Cash discount calculation at invoice level not at sales order level

Dear Friends
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
where these setting incurred in this process. i have verifies all the routies, there is no such kind of logic to calculate in a particular palce.
treat this one as high priority and let me know.
Thanks
Raju.

Hi
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
Please check your Pricing Procedure, whetehr against your Cash Discount Condition Type, Requirement 24 or 23 is maintained? If it is maintained remove these requirements and save. Then try to run the transaction.
Regards,
Amitesh Anand

Down Payment Received - Output Tax Account definition

Hi,
I have defined reconciliation account for down payment received under OBXR, and it works fine. However, the issue comes when we post output tax received along with customer down payment. I get the error "No taxes on sales/purch.are allowed for account 214010, O1 is not allowed". 214010 is our customer down payment account.
It looks like I have to define tax account under "Define Tax Accounts for Down Payments Received (OB40)" and also "Define Account for Tax Clearing (OBXB)". I am not sure where in OB40 and OBXB I have to define these accounts. Or is it enough if I just define tax account for down payment under OB40 and don't do anything in OBXB.
I appreciate your help.
Thank you

> Hi,
>
> I have defined reconciliation account for down
> payment received under OBXR, and it works fine.
> However, the issue comes when we post output tax
> received along with customer down payment. I get the
> error "No taxes on sales/purch.are allowed for
> account 214010, O1 is not allowed". 214010 is our
> customer down payment account.
> Go to your GL account 214010 in FS00 in change mode and make the following settings from F4. < Output tax account
> It looks like I have to define tax account under
> "Define Tax Accounts for Down Payments Received
> (OB40)" and also "Define Account for Tax Clearing
> (OBXB)". I am not sure where in OB40 and OBXB I have
> to define these accounts. Or is it enough if I just
> define tax account for down payment under OB40 and
> don't do anything in OBXB.
> Once u make the above settings then the system will tell you whether you need to define other accounts for postings once you make postings.> I appreciate your help.
>
> Thank you

AR Down payment receivables account

Dear Experts,
Can you please throw some light on AR Down payment receivables account? Should this be an asset account or liability account?
I have linked a down payment receivable control account and have posted AR DP invoice, but it gets posted against regular debtors control account. So when I click view by control accounts, I see no balance in the down payment receivable control account. How do I ensure that when I account AR DP invoice, it is posted against this control account and not the regular debtor's control account?
If an AR Down Payment invoice is paid, would there be any balance left in the down payment receivable control account?
Please clarify on these queries related to down payment receivables account.
Thanks,
Arun

Hi Yeni and Arun,
I have a requirement similar to Anual Maintenance Contract. Please share with me your solutions
Here are the details:
Customer buys a warranty contract for an appliance for a specific period of time say 1 year and pays 100% Down payment
Down Payment must be posted to Down payment account
During contract validity time, free of charge services and spare parts are delivered to customer ( Customer calls service department if he has a problem)
At defined time e,g end of year, we need to post to revenue account. This posting should automatically reduce the value on the down payment account.
Questions:
Which sales process should we use to cover this requirement?
How can i set Gl account determination of "downpayment account" in every customer. This was a suggestion from Yeni in the previous post
Many thanks for your help.
Regards,
MKW

Down payment received through POS

Hello,
According to our internal procedure customer down payments are posted with special GL indicator. Sometimes payments are coming through our store's system (POS). We want electronically to receive such payments (IDOC) and post them like it is done in transaction F-29 - Down payment. We investigated problem a litlle bit and found that IDOC FINSTA (electronic bank statement) could be useful for us, but we are not sure. Have You any ideas, how this problem can be solved (for example, payment advice note)?
Thank You,
Natalija

> Hi,
>
> I have defined reconciliation account for down
> payment received under OBXR, and it works fine.
> However, the issue comes when we post output tax
> received along with customer down payment. I get the
> error "No taxes on sales/purch.are allowed for
> account 214010, O1 is not allowed". 214010 is our
> customer down payment account.
> Go to your GL account 214010 in FS00 in change mode and make the following settings from F4. < Output tax account
> It looks like I have to define tax account under
> "Define Tax Accounts for Down Payments Received
> (OB40)" and also "Define Account for Tax Clearing
> (OBXB)". I am not sure where in OB40 and OBXB I have
> to define these accounts. Or is it enough if I just
> define tax account for down payment under OB40 and
> don't do anything in OBXB.
> Once u make the above settings then the system will tell you whether you need to define other accounts for postings once you make postings.> I appreciate your help.
>
> Thank you

Account detemination possible at sales order level

Is revenue account detemination possible at sales order level ? When I created the sales order and checked account detrmination analysis, most of the screen is blank. Is it expected to happen at sales order level ?

Hi,
Account determination should take place at billing doucmnet level.
Sales order doesn't give you the idea of how much did you sell to the customer.actual sales comes into picture when yu receive the money from customer after the billing is done.
Accounts will be hit at the time of PGI but those are controlled from the configuration of valuation class which you put in your material master.
Reward if it helps.
Regards
Karan

Down payment report by purchase order

Hi,
Is there any report available to see the down payment/down payment requests by purchase order.
I am trying to execute the transaction code ME2DP but it does not exist. We are in ECC 6.
Please note we cannot use FBL1N (noted item/sp GL) as there is no PO in selection.
Regards
Shanif

HI,
You can try using Transaction code: ME2N with Scope of List 'BSET' and Selection Parameter which has option Down payment validation. If such selection parameter is not available in your system than you can create it using below path:-
SPRO - Materials Management -Purchasing -Reporting -Maintain Purchasing Lists -Selection Parameters
Please find below screen shot for the same:-
ME2N
SPRO Path- (Selection Parameters)
Regards,
Anand Raichura

Credit check at sales order level?

Dear experts
I want to set credit check at sale order level with following conditions
consider open deliveries for credit exposure
consider billing documents for creadit exposure
do not consider any open orders
Also if oldest items are open for more than 7days then block the sale order creation
e.g suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-. In this case system should block the new sale order created of value more than Rs.50000/-
plz suggest the configuration steps
regards
kailash

dear friend
For i am already having the same setting but still my scenario is not working. i will explain my scenario again
suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-.
In this case system should block the new sale order created of value more than Rs.50000/-
But with the said settings purpose is not getting solved.
my settings are;
In OVA8 ;
Update: 000015
Static check: TICK
Status: TICK
open deliveries: TICK
Plz suggest
kailash

SD Stock checkint at Sale order level

Dear Gurus
I would like to know that, instead of delivery stage i would like to give control at the time of material entry in sale order level. Whenever user enters a material code system should not allow unless stock is there.
regards
Prasad

Hi there,
Are you asking that in order entry if a material is not available, then the system should not allow to even enter the material?
May I know the reason for that?
Through customizing it is possible. But consider this scenario which you will surely come across in that case. Consider that you will code in such a way that material will have a block if stock is not available. Consider that on 13th Oct you will carry out stock inventory in your plant & find that 100 quantity is available. So you will remove the material block & allow order entry for that material. Consider that you have an order with quantity 150 logged in. Since there is no block on the material, user will be allowed to enter the material. Customer requires 150 but you have just 100. That means there is no sufficient stock available to fulfill your order. This will contradict your requirement. Right?
Unless the material is entered, system will not be able to carry availability check. Coz only then you will come to know what quantity the customer requires. Only then you will be able to confirm when the item will be available.
So what I feel is that your requirement may be feasible through customized user exists but it will surely have issues like above.
Regards,
Sivanand

How configure the credit limit at sales order level

Hi
how can i configure the credit limit at sales order level..
ex: when i create sales order ... if exceeds the sales order value to credit limit value ...sysyem does not accept to save this sales order ...is it possible...pls help me in this issue
regards
sesidhar

Hiiiii
It is very much possible in SAP
first you have to create credit control area
then assign your company code to your credit control area
then create your customer and assign credit control area in billing tab (for that u have to activate credit control area for your transaction by OB20)
Then go to t-code VOA8
assing credit check to your sales document type
create credit control area automatic with your credit control area.
Regards
Shambhu Sarkar

At sales order level

Hi,
In sales order level i am opening MWST condition i am getting "CondRoundDiff ". 0,01-, where it is getting this value and how to remove this one , and what is the solution for this please help me any one..
Thanks,
KK
Edited by: Anand2mnp on Apr 26, 2011 6:57 PM

This is likely due to the MWST being a group condition - meaning that SD recalculates the condition on the basis of the sum of the items in the group. This is quite normal for tax conditions -as customers expect tax to be calculated in the total.
You can remove the group setting - however, you may get customer complaints when the tax amounts on the item add up to more than the tax calculated on the total.

Route not determing automatically at sales order level for some sales order

Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
Venkat

Hi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB

Down payment Receive at Sales order Level

Similar Messages

Maybe you are looking for