DSL worse than dialup.... no help from tech support

about 3-4 weeks ago we started to need to reboot the modem MORE than the typical 3-4 times a day.Then our phone landline went out completely.  Back within a day and since then, the DSL has been 100% useless. I run a speedtest and get 1.2.   I get on chat with tech support (super fun by the way) and run the speed test a few more times and am told it's ok. (the speed magically goes up when I'm on chat..weird). Last time i was told to run a speed test it took 2.5 minutes to LOAD THE WEBSITE for the speed test.then the speed test results came back ant about 2.7 Mbps. I have no idea how i can have a decent speed test yet it takes dial up speed times to wait for pages to load.I used to be able to stream shows without issue.  now it buffers for 90 seconds to watch 10 seconds of show.RIDICULOUS. I'm convinced our line was never fixed properly from the outage a couple weeks ago.Do I need to send in a repair ticket for 'noise on my line' to get service.  "Ansari" over in India is not worth chatting with. Done wasting hours of my life chatting about a problem that needs fixed here. Last time i complained to the PA-UC about the frequent phone issues in our area, Verizon's official response was there were "mouse nests in our box that were causing the phone line outages". I have zero other options.  Time-Warner won't run line out our way.  Co-Ax won't come our way either.FIOS?  ha yeah that'll never be an option.  Satellite internet is slow and expensive.  Cellular Mi-fi is barely tolerable. I have no idea what to do now to get something fixed.maybe the PA-UC or BBB needs notified again.

Hi buk542,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • Help needed..no help from tech support... V04/Line...

    hi..
    i'm looking for some help as i'm getting absolutely none from so called technical support..
    long story short, my home hub's broadband light started to flash orange last wednesday night so i called the helpline and was told there was a fault on my line... it all actually started when i tried to watch an on demand programme and got a "V04" error... now bearing in mind i've had BT Vision for about 6 months and the only time I had V04 was when i first started and "quality of service" wasn't on my line...
    anyway...
    the fault got fixed but i couldn't watch on demand still....V04 was still coming up... i was told by tech support that i had to wait for my broadband to get up to full speed again as the fault had essentially reset it and wouldn't take more than 48 hours...here i am 72 hours later and i still cannot access on demand and my broadband speed is still less than 1mb and now they're trying to fob me off saying thats my max speed despite me being a Vision customer for 6 months with no issue!!
    can anyone offer any advice on what to do next?? i feel i've taken it as far as i can with BT Tech Support

    The speedtester is at http://speedtester.bt.com/
    Just follow the instructions, enter your phone number and click the GO button. It will take a few minutes. When it's done there will be some text telling you the speed at which your router is sync'd to the exchange and it will also tell you the IP profile value.
    A speed test during my problem period included this text;
       Download speed achieved during the test was - 902 Kbps
       For your connection the acceptable range of speeds is 200 - 1000 Kbps
       Additional Information
       Your DSL Connection Rate: 6775 Kbps(DOWN-STREAM), 1107 Kbps(UP-STREAM)
       IP Profile for your line is - 1000 Kbps
    So my understanding is that I was connected to the exchange at 6775 Kbps but my download speed was limited to 1000 Kbps by the IP profile. I left the hub switched on for three days and after being continuously connected at 6775 with no disconnections the IP profile value increased to 5000 Kbps and Vision VOD started working again.
    If you see a DSL connection rate of only (say) 1100 Kbps then that's not good  In this situation I'd personally try rebooting the hub to see if it re-syncs at a higher speed but some people may say this is a bad thing to do (another disconnect event). However if you see a high connection rate but a low IP profile then the profile is capping you. In this case delve deeper into the hub information (Advanced -> Status -> ADSL Line -> Details) and see how long the connection has been establshed, i.e. does it keep disconnecting. If it's stable then the IP value should increase after the three days. If the hub has already been sync'd at a high speed for three days then the IP profile may be stuck, or there may be other things going on such as line noise. The broadband people should be able to connect to your hub to perform tests on such things, but my experience was that they wanted to wait the three days first to see if it would sort itself out.
    Hope this helps.

  • HP Probook 4510S says "Plugged in Not Charging," little help from tech support

    Hi there,
    I have a two year old HP Probook 4510S that has had a ton of problems. The most recent of which was an error message every time I turned on the computer saying "Batter is critically low" and it stopped charging and said that power was 0% (it continued to work though if it was plugged in and would die immediately if the plug was removed). I replaced the battery ($108), which took about a month to receive because HP apparently sent the store the battery that goes with the new model of Probook and said it would fit in the old model (it didn't and had to be sent back). When I finally got the new battery it worked for about a day and then I noticed that the message said "Plugged in, not charging" and when the charger isn't plugged in the battery seems to deplete rapidly. Now it's at 36% and not charging.
    I spoke to someone today at tech support and she said because it's out of warranty they couldn't help me, but that I should "try a friend's charger" to diagnose the problem myself, as though everyone has the same charger. When I said I didn't have access to another laptop to try another charger she just repeated that I need to try it on a different charger to see if it's a problem with the battery or the charger. But that if it's the battery and I provide them with proof of purchase they could replace that. The battery is brand new and doing the same thing as the last battery, so I doubt this is the problem. I said that I had seen messages all over the internet discussing this problem and that no one seemed to have the answer and she said "Those are on the internet, we haven't substantiated those claims." I'm shocked that HP doesn't seem to care that they get a bad reputation for offering so little help if a product is out of warranty. Because of this experience I doubt I would purchase another product from them, and I would warn others against it too. I've had more computer problems with HP than any other brand of laptop I've had or any of my friends/family have had. In the meantime, has anyone else had this problem? From the forums I've read it seems that occasionally people find solutions, but none seem to be working for me. Any insight would be much appreciated.

    I did a BIOS update on my ProBook 4530s and it took care of the problem

  • Have tried connecting my email account to my iPad...have had help from tech support from my server....everything on advance set up is correct, but iPad still says my username or password is incorrect.  Anyone have any other suggestions?  Tired of

    I have tried connecting my email account to my iPad, had help from my phone company/server tech support.  Everything is correct in the advanced settings...but my iPad STILL says my user name & password are incorrect.  Any other suggestions?

    I interesting note:
    MAILBIRD uses port 993 for incoming mail but THUNDERBIRD uses port 143
    When uses 143, it kept " checking capabilities...."
    then I changed to port 993 (like in MAILBIRD), it said "connected to.....mail," but then "timed out"
    Any idea please???? help....extremely frustrated...

  • I need help from Customer Support. Whatever this charge is on my credit card,

     He recibido un cargo de su tienda, que curiosamente he visto que se han hecho muchos cargos a diferentes personas bajo el mismo copncepto y tienda.Favor acreditarme dicho monto porque no he comprado nada con ustedes y ni tengo idea donde está Minesota.Este es mi cargo. 23/07/15323343GEEKSQUAD RENE00015826 RICHFIELD UUSRD$1,428.010.00 Y veo en Internet que otros clientes han hecho reclamos del mismo concepto.   Subject Author PostedGEEKSQUAD RENE00015826Care‎03-09-2015 06:30 PMGEEKSQUAD RENE00015826 Unknown ChargePriscillaQ‎12-29-2014 10:08 PMrandom 10 dollar charge from richfield MN to my ac...ChrisBurns‎07-01-2015 12:50 PMUnknown Geeksquad charge on my Credit CardHardingR‎12-01-2014 05:57 PMGeekSquad protection terms changed without being i... Lo que me hace pensar que algo anda muy mal en ese Best Buy.  Como es posible que no hayan corregido e identificado quienes están detrás de este fraude que lleva años. I need help from Customer Support.  Whatever this charge is on my credit card,jesmann‎10-05-2014 04:52 PM  

    Hola scj2000-
    Muchas gracias por visitar nuestro foro en búsqueda de una explicación al cargo que recién apareció en tu tarjeta de crédito.
    Entiendo su preocupación, ya que cualquier cargo extraño que aparece en un estado de cuenta puede ser alarmante. En este caso, el último cargo que puede recuperar usando el correo electrónico que usaste para registrarte al foro, refleja que se renovó un antivirus Kaspersky. Esta autorización nos diste cuando realizaste la compra de tu Lenovo, desde entonces se renueva automáticamente la licencia de antivirus.
    Las otras publicaciones que has leído, indican lo mismo. Un cargo que se ha hecho a la tarjeta de crédito que se presentó durante la compra con la autorización del cliente.
    Lamento mucho la confusión y espero esto aclare tu duda.
    Atentamente,

  • How do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

    qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

    For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
    For example:
    At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
    As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
    This may or may not assist you but, it hopefully explains how the issue may be happening.

  • ITunes Plus Upgrade--No help from iTunes Support

    I appologize for this lengthy post. Believe me I have more to the story, but want to keep it as short as possible. Bottom line is I'm looking for help with iTunes plus upgrade please.
    My specific problem is getting customer support to upgrade my old iTunes songs iTunes to iTunes plus so I can use them on our new Sonos player. It’s now been almost a week since this issue arose and there has been no help in getting my problems solved. My main problem is that there is no telephone customer support for iTunes. All of the support for iTunes is now done online through emails. That is a huge issue in my mind, but not the purpose for this post.
    Here is my problem..
    I have two iTunes accounts. Account # 1 was my primary account until 2008/09 time frame when I switched from a PC to Macbook Pro. I have 314 songs from 2006-08 that were purchased on Account #1 that I'm trying to upgrade to iTunes Plus. Account #2 is now my primary iTunes account. The Account #2 songs are all iTunes plus and do not need upgrading. I now have all the purchases from both accounts on my Mac Mini serving as a HTC, but the old iTunes DRM songs cannot be played on Sonos until they get upgraded.
    My issue solely relates to my old songs on Account #1. I have been trying to upgrade my account 1 songs since last Thursday. My iTunes store account is currently logged into Account 1 when attempting the updgrade. When I first made the purchase, I got the on screen message that I’d get an email with instructions to complete the purchase. Well three days passed and I never got the email. I also noticed that my purchase of $104 showed up as three “pending” credit card charges on my bank account records. This seemed odd so I called Apple for help. Big mistake!!!!!
    When I attempted to call Apple Support I was continually given to “technical support” for either my Macbook or Mac Mini. They never listened to what I was saying. In fact one rep told me I would need to pay the $39 fee for technical support on my issue!!!! Finally, after speaking to three different individuals one of the “tech support” reps was able to contact an iTunes support rep. Note, that I could not speak to them, rather it was strictly apple employee to apple employee. I was placed on hold for thirty minutes while they worked on my issue. After thirty minutes I was told to go to the iTunes store and start over. I went to iTunes store and completed the purchase again. Shortly thereafter, I received an email response from iTunes saying:
    Dear Tom,
    Your iTunes Plus music upgrade could not be successfully completed because there was a problem with one of the items that was to be upgraded. Please return to your Upgrade My Library page and click Buy and your upgrade should be processed successfully. We are sorry for the inconvenience and appreciate your business.
    Sincerely,
    iTunes Store Team
    Based on this email. I went to iTunes store again and tried the purchase….again. I then got the same email response a short time later. I have attempted two other times to buy the upgrades but got no email responses at all. Late Sunday, I called Apple again and also used their online iTunes support page. I got one response late Sunday evening asking a question about error messages, I answered their question by providing them the above iTunes notice. That email late Sunday night was the last communication I've recieved from iTunes support. It’s now three days later and I’m still waiting to hear back from someone at iTunes support. All I want to do is spend 104 dollars to upgrade my 300+ songs, but no one at Apple seems to care.
    I am really disappointed in Apple’s customer service. I’ve been a fan of Apple for quite some time, between my wife and I, we have 6 Apple products in our home. The lack of customer support is really disgraceful.
    Anyone have any ideas.

    This is a follow up. Finally, after almost 72 hours, I recieved another email from the original iTunes support representative. According to her, the problem is that one or more of my songs on the account are either not eligible for the upgrade or the file is corrupted and can not be upgraded. In short I cannot use the "Buy All" feature because I will always hit this roadblock. The only way to resolve this, is to upgrade each song individually or select a few songs at a time to upgrade.
    I will have to do this until I get the song or songs that is causing the problem. Once I have identified the song(s), I can chose to repurchase them and get a refund. All songs today are at the DRM free format so repurchased songs will automatically be the upgraded file.
    So I'll now begin the upgrade of the 314 songs. I guess it could be worse.
    Okay, I got an answer and an offer of a refund, but this answer certainly could have been provided three days ago. Am I being unreasonable?

  • Itunes crashed during backup and I can't get help from apple support on the

    website.
    Stupid Itunes crashed on disk 41 of 46 when backing up.
    There is no help available on the apple website and no way to request help on the apple website for any issue with Itunes.
    How do I fix this problem?
    How do I tell Itunes which disks it backup up so it won't try backing them up all over again. Did it destroy a list of what was backed up? What's going on with itunes anyways? Does it always crash when it backs up this many cds? I don't want to start all over again and ruin another 41 CDR disks trying to back it up. How do I get it to continue from where it crashed or do whatever has to be done to get it to resume where it crashed during backup?
    Stupid program wouldn't let me do anything after it crashed. said it will take a minute or two (more like forever) to cancel backup. Don't even know why it was trying to cancel the backup. I didn't tell it to.

    Apparently there are some bugs in the latest itunes. DO NOT USE ITUNES TO BACKUP YOUR LIBRARY! UNLESS IT COMPLETES THE BACKUP, ITUNES IS NOT SMART ENOUGH TO FIGURE OUT WHICH FILES WERE BACKED UP. TECH SUPPORT DOES NOT KNOW HOW TO MAKE ITUNES KNOW WHAT FILES WERE BACKED UP SO IT CAN CONTINUE FROM WHERE IT LEFT OFF. AFTER 41 CDS WORTH OF BACKUPS, ITUNES CRASHED AND IT TRIED TO CANCEL THE BACKUP BUT NEVER FINISHED DOING THAT.
    SO AFTER 60 CDS WORTH AND ABOUT 6 HOURS OF WASTED TIME, THE ONLY WAY IS TO BACKUP THE ENTIRE LIBRARY ALL OVER AGAIN WHICH IS A TOTAL WASTE OF MONEY, TIME, AND CDS WITH NO GUARANTEE THAT IT WILL WORK ANY BETTER THE SECOND TIME AROUND.
    EVEN TRYING TO RESTORE FROM CDS DOESN'T TELL ITUNES TO UPDATE ITS LIST OF BACKED UP FILES. I'M SURPRISED THAT SUCH A BIG BLUNDER WITH ITUNES HAS GONE UNNOTICED.
    ITS A SERIOUS ENOUGH ISSUE THAT SOMETHING NEEDS TO BE DONE ABOUT IT. I BACKED UP MY ITUNES TO HD AND THERE WERE NO PROBLEMS SO OBVIOUSLY ITS AN ITUNES ISSUE.
    NEEDLESS TO SAY, ITS A VERY ANNOYING PROBLEM TO PUT SO MUCH TIME AND EFFORT INTO GETTING NOWHERE.

  • TV remote control reset procedure from tech support

    I was able to get this information from Toshiba tech support. It is not posted in the Forums or Knowledge Base that I could find.
    I have a 42" LCD TV model 42RV530U. The top row of buttons (on/off, picture size were the 2 I needed today) on the remote stopped working. Other buttons work fine.I tried new batteries and the TV reset procedure. Neither worked.
    Here is what tech support said: Remove the batteries from the remote. Then press every button on the remote from top to bottom. EVERY button. Then re-insert the batteries. BTW, this did not work for me. So I'm ordering a new remote. They are only $19.99 plus shipping and handling. Having tech support talk you through the above remote control reset procedure is $35 if your TV is out of warranty. So the cheapest solution is just buy a new remote.
    Hope this helps you today.
    Cheers!

    Sorry, the problem is solved. I was lazy reading the instructions and I have figured it out. The instructions DO help you!

  • NEED HELP! Tech support told me to ask Best Buy???

    I just purchased a K410
    http://www.amazon.com/gp/product/B009AEP51Q/ref=oh_details_o02_s00_i00
    I need to hook up two monitors via a digital signal for an extended display (not mirrored), but i only have one digital out (HDMI), the other is analog (VGA).  So I'm pretty sure I need a new graphics card that has two DVI-D outputs OR one HDMI and one DVI-D output, b/c my monitors both have DVI-D inputs, but I already have a HDMI to DVI adapter cable. What graphics card should I replace the stock one with, and what's the deal with getting an extra power supply for it?
    Will this work instead?
    http://www.amazon.com/Sabrent-UGA-2K-195-2048x1152-1920x1080-DisplayLink/dp/B00ABNLEWO/ref=sr_1_1?ie...
    Tech support is so awful for Lenovo, multiple "technicians" either told me to get splitters or that I needed new monitors--all wrong.  Thanks in advance.

    hi alexfsu,
    Welcome to the Lenovo Forums.
    If you're in a budget and have already two HDMI to DVI-D dual-link adapters, you can get a low profile GeForce 210 PCI-E 2.0 for your dual monitor needs (DVI-I is compatible with DVI-D as long as they're both dual-link). If your machine came with a universal 240W PSU, I recommend you change it to a good quality 350W ATX with a +12V rail so that it could accommodate the power consumption of the graphics card specially when using dual monitors.
    I personally haven't tried the Sabrent UGA-2K-195 USB 2.0 to HDMI/DVI but it has good reviews and I think it will work on your setup.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How do I speak with someone from tech support for a issue??????

    I have tried many times to download the correct software for my HP OfficeJet 7410 printer. I always get a error message. "THE SYSTEM CAN NOT FIND THE FILE SPECIFIED". ("C:\Users\R61\AppData\Local\Temp\7z611S7\Setup\..\Setup\Blocksysus...) What is that???. Their wesite is of no value to help me. In frustration, then I tried to buy the driver software. Again, they could not help. I used to be able to print. Using their website, I was able to test print and test scan. All is well with that, so why can I not print? I have two other computers that are connected and print fine. My laptop will not print. It used too. Why are my downloads of the correct software not allowing the install of software?

    JDMAN
    The problem is likely one having to do with a previous installation failure or a minor corruption - a misplaced instruction, a bad link, something in the File System on the computer that is not where it belongs.
    Regardless, the issue is not likely the fault of the Full Feature Software.  That does not mean the computer is bad, it means that there is situation present on the computer that the normal installation program cannot handle.  Programs are smart, but there is a limit to what can be done during a standard installation.
    You can certainly call HP:
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Including UK and Europe
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    ====================================================
    You can, if you like, take a look at the following Post:
    From pcwizard  for Windows 7
    Solved - Install Error "The system cannot find the file specified" (hpzprl40.exe)
    The solution likely fits your situation.  Do understand that where the Post suggests the member install the Full Feature Software, that you would install / work with the Full Feature Software for your printer:
    HP Officejet 7410 All-in-One Printer Drivers
    The entire Post is lengthy; contains much in the way of repeated content, does not always stick the the subject at hand, and also contains some devisive comments that, frankly add nothing to the constructive solution.  You may take away from it as much or as little as you feel is useful for your situation.
    One of the last entries in that lengthy regale regards Windows 8.x -- the contents might be useful to Forum members running Windows 8.x:
    Printer Installation in Windows 8.1: 'System cannot find file specified' Message
    NOTE from JonW: In addition to the details in this document I would recommend TURNING OFF REALTIME SCANNING when you have MCAFFEE LIVESAFE 2014 installed.
    =======================================================
    Option - Install from the Device Manager
    This is an alternate method to install the Driver that may be useful under some conditions. In the context of this overall procedure, it is necessary to have at least downloaded the software from the Printer’s support pages (so that the software package is located somewhere on the computer).
    Control Panel > icons > Device Manager > Imaging Devices >
    Right-Click on your Printer >
    Update Driver Software > Browse my computer for driver software >
    Let me pick from a list of device drivers on my system >
    If applicable:  Select the proper device Version from the list >   Next
    You may be presented with a prompt asking permission to install the Driver:
    Select Install to continue
    Restart / Reboot the computer and log in
     =======================================================
    I am not a Printer Expert.
    I hope this helps.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • NEWS FROM TECH SUPPORT - UPDATED LINK COMING to SOLVE OUTLOOK SYNCING ETC

    I talked to Tech support today Regarding Outlook sync... there is a work around... defining a hotmail account (with hotmail connector)  in outlook , making hotmail the contact database.... it will sync to the online hotmail account . when you then create the hotmail email on your Z10 .. it does have sync options for your contacts, and calendar.. not a big deal for me because I already had a htomail account in Outlook (as well as 3 other business accounts...
    ALSO:
    the tech guy says by end of month ( I suspect before US release):
    Blackberry will have:
    * IMPROVED MIGRATION FROM OLD BLACKBERRYs
    * "OPPOURTUNITIES to IMPORT CALENDAR, etc. (whatever that means)
    * TWO WAY SYNC to OUTLOOK

    Thank you.
    This same coming Link upgrade was announced in this forum three weeks ago:
    http://supportforums.blackberry.com/t5/BlackBerry-​Z10/New-Blackberry-10-Sync-to-Outlook/m-p/2170993#​...
    And the Outlook.com/Hotmail sync is detailed here:
    http://helpblog.blackberry.com/2013/02/how-to-setu​p-outlook-to-wirelessly-synchronize-your-contacts-​...
    But I can assure you, the outlook.com/hotmail sync workaround is only a workaround, not a solution. I've been using this not for ~weeks and it works, just not a complete solution.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • World's WORST Tech Support ? (actual reply from tech support insi

    Hi,
    recently I sent a question via email to tech support and I got a reply. I have got bad replies from creative tech support before and also from other so called 'tech support' but this one just crossed all limits!
    It is insane. Either the guy is absolute moron or thinks that everybody that he deals with is a moron and will accept whatever he will say.
    Does creative have any kind Quality check in their system as to how their support techs are performing ?
    Do they even have any clue what they are telling their customers ?
    Do they even have any clue what kind of damage they are doing to the brand ?
    I also take it as my insult! Who the heck they think they are talking to ?
    Someone please read my question and tell me if it was too difficult to understand ? And Please read their response and tell me if my feeble brain is not able to make the connection between the question and the reply!!
    Attached below is the REAL and ACTUAL email copied and pasted word for word, including the ticket number!
    I think creative just lost another customer for life!
    ================================================== =======================================
    Dear ____,
    Thank you for replying back to Creative technical support.
    I understand that you're inquiring about the quality output of the
    sound
    card.
    Please be advised that the format output is up to 24-bit/96kHz. It
    depends on the settings
    You may also check your manual regarding this. You can get your manual
    online, please follow instructions below:
    - go to
    http://us.creative.com/support/downloads/welcome.asp?type=manuals
    - Select Your Product : Sound Blaster > X-Fi > Sound Blaster X-Fi
    Fatalty
    - click Go!
    -click on USB Sound Blaster Audigy 2 NX Users Guide English to
    download
    files
    Do get back to us with the results once you are done trying the above
    concerns so that we would know how to assist you further.
    In the interim, I'd like to introduce the ZEN Aurvana In-Ear Earphones
    Acoustically and ergonomically designed in-ear earphones that deli'ver
    superb audio quality, noise isolation, and comfort. Click on the link
    for more information:
    http://us.creative.com/products/product.asp?category=23&subcategory=27&product=470 2
    Thank you for your continuous support in Creative product.
    Best Regards,
    **name removed**
    Technical Support
    Creative Labs Americas
    Moderator's note: Please remove the name of the advisor when making such posts.
    High fidelity is simplified with Creative BasXPort Speakers for your PC
    and LCD TV -- Hear booming bass without the hassle and wires of a space
    hogging subwoofer.
    http://us.creative.com/redirect.asp?id=2293
    Accessorize your Sound Blaster with a remote control, console or dri've
    bay upgrade kit, home theater cable, premium headphones and speakers,
    and play hands-free with a versatile headset, and more!
    http://us.creative.com/redirect.asp?id=34
    Protect your Sound Blaster X-Fi by extending your warranty coverage to
    a
    full 2 years with a Creative Care Protection Plan.
    http://us.creative.com/redirect.asp?id=885
    Original Message Follows:
    ==================================
    Subject: CLI - Technical Support Request - (Audigy 2 NX)
    Name:
    E-mail Address:
    Self Description: Advanced PC User
    Region: Americas
    Country: United States of America
    Support Inquiry: ID(2) I need help with a Creative software
    application
    Product: Audigy 2 NX
    CCPP Certificate Number:
    Serial Number:
    Purchase Date: //2008
    Operating System: Windows XP
    Creative Model Number: SB0300
    Computer Brand/Model:
    Processor/CPU:
    Memory:
    BIOS Type/Revision:
    System Board/Chipset:
    Detailed Problem Description:
    When recording an analog signal at 96Khz from the Line input of the
    Audigy 2 NX, does it really sample the signal at 96Khz or does it
    sample
    at a different rate and then re-sample internally (DSP) to 96Khz ? If
    it
    samples at a different rate, then what is that rate ? Please let me
    know
    soon. Thanks! -.
    ================================================== =====================================
    Message Edited by whatcreative on 04-23-2008 06:07 PMMessage Edited by KokChoy-CL on <span class='local-date'> 04-24-2008<span class='local-time'> 09:2 AM

    Hi,
    I am sorry about your experience with support and have forwarded this to the respecti've department. The Audigy 2 NX will sample the signal at 96Khz when recording an analog signal at 96Khz from the Line input.
    Hope this answers your query.

  • Overnight my contact list went from 1492 contacts to 52.. With help from Apple support I retrieved all of my contacts.  Here is the problem, I lost the groups.  None of my contacts are sorted into groups as they used to be which is very important for me.

    Overnight my contact list went from 1492 to 52.  With help from Apple I retrieved the missing contacts using Time Machine.  The problems is that the contacts are not in groups as they used to be.  Any suggestions?  I really need them grouped for business reasons.
    Also, there are no longer pictures associated with each contact.
    thanks for any help anyone can give me getting contacts back into the groups that I had established.  By the way, the group names are still there, but they are all empty.
    thanks,
    Sparky

    What Mac do you have, with what version of OS X?

  • Need Help Finding Tech Support Contact Info

    I can't seem to locate the area where you can either email Apple with a question or talk to a tech support person via chat, phone, email ect.... Does Apple even offer tech support? I know that some sites do and figured that Apple would too but maybe not? Any help in this would be great! Thanks!

    Hi drzenmeister,
    Welcome to Apple Discussions!
    Well, this very forum is one very good place to find answers to any technical question.
    It is commonly admitted that you can find better, deeper answers with users who have no limitations (unlike Apple employees) in what they are allowed to reveal etc.
    Then when you buy a Mac, you get phone or email support, yes, 90 days free during the first year (warranty) or 1 year free if you purchase the 2 years warranty extension (AppleCare Protection Plan —> 3 years warranty)
    (about this one free phone year, I think it depends too on where in the world you purchased ACPP)
    HTH
    Axl

Maybe you are looking for