Duplex printing with HP Color Laserjet 4650dn

Dear all,
I wanted to print the handouts of a Powerpoint presentation (Office for Mac 2008, v12.2.5), but could not get a double-sided copy. The printer (HP CLJ 4650 dn) is installed with the OS X 10.6.4 embedded drivers etc. as HP CLJ 4650. Works fine otherwise.
The settings for the printer in System Preferences/Print Fax/General indicate that I apparently have a driver version 16.4. By accessing the Printer Webpage I have set the duplex option ON and checked all the other options for there settings. As far as I know it seems correct.
I have ticked the box Duplex Unit in System Preferences/Print Fax/Driver.
However, when I want to print the slides/handouts and open the print window I can only see Manual Duplex as an option in the drop-down menu Copies & Pages. No straight forward Duplex Printing or Automatic Duplex Printing option whatsoever of which the printer is capable.
No problem with the two remaining MS Windows Vista PC's, which frustrates me.
Have I missed something? Or done something wrong/different?
If anyone has a suggestion I would be grateful.
Kind regards,
John Keasberry

Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
But may be you have done this...
Bests,
Álvaro

Similar Messages

Can't print with HP Color LaserJet dn2605

I haven't been able to print my HP Color LaserJet from Early 2008 Mac Pro using 10.9.4. I have attempted to print on the network and USB to no avail. I have deleted the printer, reset all printers and scanners. Once I delete or reset the printers, I always have to recycle/rebounce the printer so it can be found. Once found and I select it by the "Use" drop down, there are two(2) HP Color LaserJet 2605 profiles. I can select either one and sets-up the printer. Once I attempt to use the printer, the print job goes to the queue and few minutes later the printer starts initiating and sounds like that a paper is getting ready to move and it stops or quits. I then receive the yellow light a problem occurs, thats all the farther it goes. I have the latest printer driver update 19.9.. I also have reloaded the OS 3-4 times. Here is what I receive the print queue when it fails: "Stopped - Unable to write print data: Broken pipe".

That's sounding like a printer problem, not software.
But just in case, try deleting the HP folder from /Library/Printers, then Reset the Printing System and add the printer again.
OS X Mavericks: Reset the printing system
If that doesn't work, use a browser and connect to your router, and see if you can identify the printer in "connected devices."
(a printer that changes IP address whenever there is some change on your local net will give symptoms like that)

How to duplex print with HP 200 Laserjet?

I'm having trouble duplex printing with my new Macbook Pro. Any suggestions? I have reloaded print drivers- Originally I was not able to select double sided printing but now I can, but it does not actually print double sided.

For cases where there is no hardware duplexer and the manufacturer's driver does not support manual duplexing, you could try HP's two-sided printing PDF workflow. I have not tried that for quite a while, so I can't guarantee it still works with the latest version of OS X.

Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
I'm having this problem on both my iMac and my MacBook Pro.
I get errors like:
"unable to write pirnt data broken pipe"
"unable to send data to printer"
"printer not connected"
I've been reading responses to others with similiar issues and I've tried
deleting and re-adding my printer.
reseting my printing system
Installing Guenprint.
re-adding my pirnter with a generic PCL driver.
None seem to correct the problem.
This problem happens both when connected directoy with USB and when connected through the network.
I have no problem printing with my work (Wondows) laptop.
Any help would be appreciated.

Thanks, a brody.
Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
I thought the issue may have been resolved.
I was finally able to print my bank statement on both the iMac and MacBook.
Today, I'm back to the the same issues.
Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
In my mind, it's pointing more and more towards a hardware issue.

Problem to print with HP Color LaserJet CP3525 (PCL 6) on Server

Hi,
I have a printer HP Color LaserJet CP3525 in a server, and I installed with the correct drivers for that but the printing output is strange. I'm trying to print in A4 paper, and everything is just printed in 1/4 of the page. The most strange is that the graphics are scaled to the 1/4 of the page while the text is exactly with the same size than the complete page, but all the letter are overlapping each other.
I also tried to print with a generic configuration and print in all the page but I can't print with color, just the black toner is used, so the quality is really bad.
Please, help me!

This sounds like a driver issue. You mention the printer being PCL6. Can you confirm which driver you are using when the 1/4 page prints occur. My guess is that it would be one of the Gutenprint drivers included with SL and this sort of output can occur when the printer driver is not supported by the printer.
Also, with regards to the Generic, which I assume is the Generic PCL Laser Printer driver included with SL, this by default is set to 300dpi. You can change this print quality setting to 600dpi, which will improve your output, especially the graphics. However this driver only supports black & white printing. So if you want to print in color from the Mac and the printer does not support PostScript, then you should look at installing the pxlmono package.
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o
Note that you will need the pxlmono, Foomatic and Ghostscript packages to use this driver suite.

Duplex Printing for HP Color LaserJet CP4005dn Setup

How can I get my duplex printing to show up/work from the printer pop-up menu. Have installed all HP CP4005dn drivers. Installed the printer with all installable options. Printer works fine except no duplex print options. Have followed Mac Help's "Displaying a printer's special features when you print" to the letter. Nada. Have UNinstalled the printer. Downloaded all Mac updates. Downloaded all HP updates. Have reinstalled the CP4005 printer with intallable options. Still no duplex print options. Where is the miss? Why can't I get the duplex to function?

Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
But may be you have done this...
Bests,
Álvaro

Grayscale Printing with HP Color Laserjet 2600n Using OS 10.6

Like a lot of people, I've been frustrated with the (lack of) support and functionality with this printer since upgrading to Snow Leopard. But at least it's working.
I have two questions:
1. Even with the printer set to Grayscale, all of my pages come out in color. Does anyone have a solution to this?
2. Has anyone found a good alternative printer to the 2600n that works well with Snow Leopard?
Thanks everyone
Steven

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC using windows 8?

Thanks for your reply.
Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
Drive productivity and save paper, using automatic two-sided printing

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Print Setup says use Adobe Color Printer with No Color Management even though I have my .icc printer profile selected

I have a ColorMunki Photo and a Canon Pixma Pro 100 that I have been using on my Mac with Photoshop CC. No issues. I must have changed something because now when I go to print, a popup says "Please use Adobe Color Printer Utility if you need to print with No Color Management". It is telling me that my I am trying to print without color management and this method of printing isn't supported. So, I reprofiled my monitor and printer and have brand new .icc profiles and it is still doing the same thing. Can someone tell me the exact things that need to be changed in Photoshop in order to use my .icc profile for color managed printing? I have no idea what I have changed. If I change to a different profile that message doesn't pop up. My document profile says that it is the same as the printer profile I am trying to print from. Does the document profile need to be set to my monitor .icc profile or the printer .icc profile that I want to print from? Any help would be appreciated! It is driving me crazy!

Please read these very recent thread, as it applies to you in full:
Re: color settings after calibrating monitor with Spyder 4Pro

Duplex printing with eprint?

Can I use duplex printing with eprint? If not, won't use much.

Hi valkman1291,
Unfortunately the option to use duplexing is not available in ePrint.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Duplex printing with hp p1102w printer mac book pro with retina display

duplex printing with hp p1102w printer mac book pro with retina display

Hello dekcanada,
I apologize, I'm a bit unclear on exactly what you are asking or describing. If you are asking how you would set up double-sided or duplex printing in Yosemite, you may find the information and steps outlined in the following article:
OS X Yosemite: Choose advanced print settings
Sincerely,
- Brenden

XP pro-64bit issue printing to a color laserjet cp3800dn

Need help troubleshooting this issue:
User is unsuccessful in printing to a Color LaserJet cp3800dn directly from an IP address.
I've tried to install the 64bit version of the driver - that didn't work
The version of XP is SP3.
Fortunately the user can print to this printer as a network shared resource. But when I tried to assign printer by IP address--because user wants to configure double-sided printing--i get the message "local downlevel document" failed to print. And I would have to cancel it from the print que.
I've tried to change the printer configuration to "print directly to printer" but seem to dislike that option because it freezes after selecting that option and try to print.
I've also tried to restart the computer once after installing HP printer drives and after making modifications to printer preferences, no luck.
Anyone encountered this issue before and have suggestions?

Phillip -- that did seem to work. Thanks!
One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
Randy

HP Pro 200 M276nw Color Printer Duplex printing with Mac OSX Yosemite 10.10

So, I have been trying to use the duplex printing feature with my Mac. However, I havne't been able to figure it out. I see the option for manual duplex printing, but the actual duplex printing feature is not working.
Any advice?

Hi @joshcooley09 ,
I see that you are experiencing issues duplexing from Yosemite. I will certainly do my best to help you.
Did you download and install the latest software for Yosemite for the printer?
HP LaserJet Pro 200 Color M276 Full Feature Software and Drivers.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet M276)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Now try and print two sided.
On the File menu, click the Print option.
Open the Finishing menu, and click the Manual Duplex tab or open the Manual Duplex menu.
Click the Manual Duplex box and select a binding option.
Click the Print button. Follow the instructions in the pop-up window that appears on the computer screen before replacing the output stack in Tray 1 for printing the second half.
If the issue persists, connect the printer to the Mac by a USB cable and test the printer. Just to rule out a network issue, if the printer is networked.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

Duplex printing with HP Color Laserjet 4650dn

Similar Messages

Maybe you are looking for