Error 513 in Satellite System Service Desk

Hello Experts,
I have a big problem in my satellite system, when I try to create a support message.
Till I began to configure the change management it works fine.
I don't know what happend.
Here are some screenshots of the configuration.
This is the error:
[Error Message in SatSys|http://dr-dream.web44.net/error_message.jpg]
this is bcos_cust in the satellite
[bcos_cust|http://dr-dream.web44.net/bcos_cust_satsys.jpg]system:
Dno_cust01 in SolMan:
[dno_cust01|http://dr-dream.web44.net/dno_cust01.jpg]
dno_cust01 in SatSys:
[http://dr-dream.web44.net/dno_cust01_2_satsys.jpg]
dnocust01 in SatSys:
[http://dr-dream.web44.net/dno_cust01_3_satsys.jpg]
dnocust01 in SatSys:
[http://dr-dream.web44.net/dno_cust01_satsys.jpg]
dno_notif in SatSys:
[http://dr-dream.web44.net/dno_notif._satsys.jpg]
dno_notif in SolMan:
[http://dr-dream.web44.net/dno_notif.jpg]
and here again on the left side DNO_NOTIF and on the right side CRMC_NR_RA_SERVICE in the SolMan
[http://dr-dream.web44.net/dno_notif_crmc_nr_ra_service.jpg]
I hope somebody can help me. I need the support Desk urgent!!!
Thanks a lot!

Thx Markus,
just an FYI for Everyone .
In the satellite systems :
In Transaction SM30, view BCOS_CUST, make the following settings for the application OSS_MSG:
Column 1: Application: OSS_MSG
Column 2: + : W
Column 3: RFC Destination: <RFC destination to the SAP Solution Manager system>
Column 4: + : CUST620
Column 5: + : 1.0
Note:

Similar Messages

Getting error on status symbol in service desk

Dear Expert,
In my service desk when i m using the T.Code crm_dno_monitor.On clicking on transaction data tab and after that on action tab in status symbol is coming red (incotrrectly processed) and message getting Find support team responsible ,when message created. I m new for service desk.
Kidly suggest me why its coming...
Regards
Ashok

Dear Antony,
Thanks for your reply,I m having doubt regarding Service Desk.Our senerio is such a manner that end user will raise a issue from satellite system then message processor is forward this issue to relevant consultant .So when using the T.Code crm_dno_monitor in transaction data tab
there is Action tab (what is exact function of that tab) in this tab i m finding error. i talk to person who did service desk in our company he told taht its related to mail)So i m confused in that as i m getting six red light there as error.
Three message are coming :-
1.Find support team responsible when message is created.
2.Send message to SAP.
Please suggest me i m get confused.
Regards
Adil

Getting Error in Solman 4.0 Service Desk

Hello Everyone,
I have installed Solman 4.0 on windows 2003 server and oracle database, I am starting to configure solman for different features like service desk, solution monitoring, sdccn etc
after i configured service desk from SPRO when i create a message i am able to fill all the fields excect for the field component i am not able to see any components inside the drop down list and without specifying this it is not allowing me to proceed further to create the message (notif_create)
and also how do we create a message from the other systems that we configured in solman through the RFC's.
Can anyone please reply to this message. I will definitely reward points. I need to configure the solman ASAP.
thanking you
srikanth

> i configured in the child system the rfc connections before and also checked in BCOS_CUST table to make sure that this rfc connection is existing.
> but still i am not able to see the components in the solman.
> i do not have access to market place,
Interesting... so you won't be able to download (and apply) any necessary notes or get the documentation or necessary BC-Sets that are attached to notes...
> are there any other configurations i need to make in child systems. what transactions do i need to use in child systems to send problem ticket to service desk in solman.
You either doubleclick on the SAP icon in the upper right corner in the SAPGUI or you use the "help - send support message" menu.
This is all covered in the documentation.
Markus

Error while uploading document to service desk ticket

Hi all,
I get error while uploading document to ticket
Message No: SKWF_SDOKERRS119 .
If iam correct I have given all the required authorisation mentioned in security guide.
what could be the reason for this kind of behaviour
Best Regards,
Alok

hi
what is your solman version? chk the sap note
[ Note 1401196 - Work Centers: attachment not saved in Incident Management|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1401196]
might be this helps,
[Message No: SKWF_SDOKERRS119|Message No: SKWF_SDOKERRS119]
jansi

Error 513

hi,
one of my user is getting error message while creating supprot message from R/3 system for solutionmanager. Other users are able to create the support message.
The message is:
Because of error 513, no support message has been created in support system
What is the reason for this messgae and how

Hi as,
the following SAP Notes might be helpful:
[864195|https://service.sap.com/sap/support/notes/864195] Error 513 when you enter Support Desk Message
[1261046|https://service.sap.com/sap/support/notes/1261046] Service Desk: Read Messages Using Local RFC Destination
[498984|https://service.sap.com/sap/support/notes/498984] Error 513 when sending support message
Best regards,
Andreas

Error creating Service Desk Message in Satellite System

Hi all
We have two satellite system from which I want to create a Support Message. With my current profile/role and can do it from one system and not from the other system. I get "Error in local message system, message xxx not complete". I dont think it is an Authotization fault, but not sure.
How should the Number ranges be setup for more than one satellite system?
Thanx
Jaco Snyman

Hi Tina
This was my answer in a previuos thread:
Hi all
I also struggled with this for 2 weeks. But the problem is fixed.
Do your "normal: config from the IMG and then:
1) Make sure that you have selected for the system NOT to check for the User in SolMan
tr: DNO_CUST04, Go to Detail, Select the field NO_USER_CHECK, "X", this is very important, otherwise you will have to create a username for everyone on the satellite system... far too timeconsuming.
2) In your satellite system under OSS_MSG: Col1:Application: OSS_MSG, Col2: + : W. Col3: RFC Destination: SM_"SOLMANRFC"_BACK. Col4: + : CUST620. COl5: + : 1.0
In the Solman side you maintain Col3 as "NONE".
3) Make sure that ALL users in the satellite system has the following roles: SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN.
4) Make sure that you have TRUSTED RFC to and from your Satellite system and Solution Manager.
The main one to be sure of is: SAP_ALL for all SOLMANxxx user in the Solution Manager system for every satelite system, because the standard roles from SAP does not work.
This should have your Service Desk Messaging working.
Jaco Snyman

Error 513 while raising the message from satellite system

Hello All,
When I try to send message(Service desk) from satellite system, i get following message
"Because of error 513, no message was creat
Support Desk System"
I gusses there is some problem with authorisation.
please guide how can I fix this issue.
Regards,
Shyam.

Hi Gurus,
I have assigned customized action profile to SLFN transaction.
When I try to send message(Service desk) from satellite system, I get following message
"Because of error 513, no message was created
Support Desk System"
But when we check in crm_dno_monitor , the message is created at the backend,but without assigning external number range.
Whenever I am making any modification in action profile, it is creating the first messgae after restart
of SAP Solman System, but for next message, Error 513 message is raised and message is created at backend without assigning external number to it
I think there is some problem in number range or buffer in number range
Can some one help me in this
regards
Swati

Because of error 513, no message was created in Support Desk System

Hello all...
Currently setting up Service Desk and when I create a service message in my satellite systems (ECC DEV, QAS, PRD, etc.), I get the error 513 as described in my subject line.
I am able to create messages within the Solution Manager environment without issue, but nothing but the error in my satellites.
Any information / assistance is greatly appreciated in advance.
We are using SM 4.0
Thanks!!!

Is your table BCOS_CUST configured so it points to the Solution Manager? If you do a test connection via SM59 for the given destination, does it work?
Markus

Error 513, no message was created in support desk system BCOS005

Hi All,
After completing the ITSM config on Solution Manager 7.1, I am stuck with the following error when creating message from any of the satellite system, or from SM itself.
"Because of error 513, no message was created in support desk system"
Message no. BCOS005
Error logs from SLG1:
"No message created from SAP message 00xxxxxx 000xxxxx 2013 due to missing IBase"
Transaction: SOLMAN_INCIDENT_UPD
Program:AI_CRM_IM_UPDATE_FROM_SAP
I have already checked various threads and suggested notes including 1522809 / 1741109, but unable to fix the issue.
RFC's between both the systems are working fine. The entry for BCOS_CUST on SM is maintained as
OSS_MSG W NONE CUST 6.2 1.0
The number range for SLF1 is maintained as 01 in TCode DNO_CUST01
I suspect this to be related to IBASE or Number range, but seem to have the correct values maintained as mentioned in above notes. Would appreciate your valuable inputs on this.
Thanks,
Varun

Hi Vivek,
Tried updating the parameter, but no luck
"Because of error 513, no message was created in support desk system"
Message no. BCOS005
Should be something to do with BCOS, can't figure out though.
Any further thoughts?
Regards,
Varun

Because of error 513, after applying BP in service desk

Dear All,
i'm now configuring service desk, and have problem "Because of error 513, no message was created in Support Desk System" when creating message from help --> create support message , Gurus please help me..im in trouble right now..
Regard,
dinie.

Hi,
Please have a look:
Error 513 while creating support message help menu in Solman system.
Because of error 513, no message was created in Support Desk System
Rajeev

Service desk RFC destination in the Satellite system

HI All,
can any body tell me the RFC destination that is to be maintianed in the satellite system so that the message reaches the solution manager service desk.
I am creating messages they are being send to the service desk successfully but are not visible when I go into the service desk of the solution.
But they are visible through the transaction code CRM_DNO_MONITOR .Can any body help the RFC destination to be maintaned in the BCOS_CUST table so that the message reaches the Service Desk.]
Currently I am using the RFC destination to the service desk client in the solution manager ie SIDCLNT200
Thanks in advance
Regards
Amit

Hi Amit,
I think your expectation is not correct. I understood, you can create a message in a satellite system and you can see the ticket in SolMan service desk. Then everything is configured correct. What you are now looking for is to see the ticket in a solution when the sat. system is part of the solution. This is not working. If you create out of a solution a service desk ticket, these ticket get a special attribute that they belong to this solution, all other tickets can not be selected by a solution.
Sorry but I am quite sure that it is working like this.
There is only one option, that you define special variants so you can see only tickets from special systems, but these variants can not be assigned to a solution.
Regards,
uDo

Service Desk - Create Message from Satellite System

Hi Guru,
I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
Appreciate for your input.
Thanks and Regards,
Yan

Yes. It is very much possible.
Use transaction - SPPFCADM
select the row - DNO_NOTIF
click on - Define action profile and action
Select the action profile - SLFN0001_STANDARD_DNO
Select the action - SLFN0001_STANDARD_DNO_CRM
in processessing type, change the container value to ZSFN.
Hope this will be helpful.
Regards
K.Kumar

Service Desk Message Creation Error on R3E System

Dear Team ,
We are not able to create the message from R3E System.Whenever we are
creating the message from R3E Satellite system ,message is thrown "Error513 , No Message is not created in service Desk." At the same time, in
CRM_DNO_Monitor on solution manager system , I am able to see thismessage without external reference number. This solution manager is
connected to 5 satellite systems where service desk message creation is
working fine.
This problem is occuring only with R3E & R3T System.and it might affect
to R3P production servers also . Kindly look into this as urgent issue
Message creations on R3E systems was working fine upto 12/4/2008.
HR/ABAP/BASIS Patch Application activity was carried out on 17/4/2008 onR3E System.Kindly suggest if this has affected message creation.
Regards,
Pavan.

Hi pavan,
Pl check ,action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO) is correct or not also check
Number ranges are assigned correctly.
Assign the points ...
Regards
Chandravilas
Edited by: Chandravilas Sonawane on May 14, 2008 12:13 PM
Edited by: Chandravilas Sonawane on May 14, 2008 12:25 PM

Accessing the service desk message from satellite system

gurus ,
after creating a creating a service desk message to solution manager system via HELP->CREATE SUPPORT MESSAGE ,
how does the message creator from satellite system will view/change the message created by them at late point of time ?

Susin,
the problem is a commonly asked one that I get when I present the Solution Manager to customers. There is always the question: How can the user see the status of the ticket?
From my point of view you can give them access to the worklist but I guess it is really a pain for the user to log on to SolMan and to access the information from there through a complex transaction.
Alternatively to provide the user with access to the ticket system, you could consider sending out an email on (all or only critical) status changes from the system bei assigning an activity to the status change. That might be much easier for the user (and for you).
After looking at and working with work centres I think it would be worth to install the neccesary patch level. It is really beneficial, for the user reporting a problem, as well as for your help desk monitoring their issues.
Since it is a very common question, and Ruediger seems to be close to the source, can you (Ruediger) maybe provide some information how SAP is going to handle that in the future? Is SAP purely focussing on the work centers in Solution Manager, or is SAP planning on a track & trace possibility within the satellite system for the users?
I guess there is no easy solution to your problem, but maybe I was able to provide some ideas how to provide more funtionality.
Cheers
Markus

Service desk status in satellite system.

Hi All,
I have configured service desk in solution manager. I am able to create message from satellite system (Help->create support message). But i am not able to figure it out, how to check the status of my message from the satellite system (i.e. any transaction code is there).
Thanks,
Rohan

>
Rohanravindra Hardikar wrote:
> How to go to "Incident Management" through SAP solution manager.
See some general information on Work Center here
[SAP Support Portal - Work Center|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000707406&]
It's available as of ST 400 SP15.
Run transaction solman_workcenter to access Work Center.
Required configuration steps are documented in IMG (transaction spro). See activities under node "Cross-Scenario Settings -> Work Center"
See also section "Work Center Navigation Roles" in Security Guide.
Best regards,
Ruediger

Error 513 in Satellite System Service Desk

Similar Messages

Maybe you are looking for