Error:An item with no delivery quantity is not permitted.

Hello,
We are receiving an error:
Only 0.00 UNT of material XXXX available.
An item with no delivery quantity is not permitted. Item will be deleyed.
This material has the following details:
Material Group: Asset
Material Type: VKHM
Ref. Mat Type: HAWA
Item Cat Grp: NORM
Industry Sector: A - Plant engin./ construction
I believe asset is not quantity based. My questions are:
1. Why is it when creating delivery, quantityis necessary. However,this was configured as asset?
2. How can i put/add stock in asset?
- In Define Attributes for material types, i searched for VKHM, and it was already maintained.
- Area for quantity/ value updating: both were ticked: By Valuation Area for Quantity and Value Updating.
- When i go to the folder on the left: Quantity/Value updating; Quantity Updating ang Value Updating were both ticked for Valuation area: 0001, material type: vkhm.
- i also tried to tick Quantity Updating and Value Updating for valuation area (plant name). Butnothing happens.
Thanks in advance for all of the help.

In this case, the reason why the delivery can not be created due to the first error:
Only 0.00 UNT of material XXXX available.
This error has number VL150, which means there is no avaiable stock when you create the delivery. To check how many
avaiblable stock you have, you need to check it in transaction CO09. usually for delivery, you should use check rule B.
In co09, if the ***. ATP qty is 0 or negative, you will get above error and the delivery can not be created. For more information regarding this error VL150, check note 153355 and 1481133.

Similar Messages

Error as An item with no Delivery quantity is not permitted. Item will be d

Hi,
When i process VL01N transaction i got below metioned error,
Error as An item with no Delivery quantity is not permitted. Item will be deleted for SD doc
Note:
I have checked in MMBE and observed Sufficient stock is there.
I have checked in MD04 and observed that for partcular S/O stock has been updated correctly.
I have checked the PO and observed GR has been made sucsefully for the required qty.
Apart from these if i execute VL01N still i got above highlighted error.
can anyone please guide me to resolve this issue.
Cheers,
Kumar.S

Hello Dear,
Could you please let us know what solution have you done to fix the Error as An item with no Delivery quantity is not permitted error. We are facing the same issue.
It would be great if you please write back to me ..
Regards
Rahul Chitte

An item with no delivery quantity is not permitted. Item will be deleted.

Sales order created, the schedule lines are confirmed for the delivery date and qty
order is not blocked for delivery
order is complete
still while creating delivery get a error message
An item with no delivery quantity is not permitted. Item will be deleted.
Message no. VL367
stock checked through MMBE that is also available in unrestricted use
kindly guide

Check this thread
[Re: Mesaage : while creation of delivery : An item with no delivery quantity|Mesaage : while creation of delivery : An item with no delivery quantity .);
In MMBE though the stock shows under Unrestricted column, it also includes delivery created and saved without doing PGI. So check in MD04 any delivery reference is flowing.
thanks
G. Lakshmipathi

Error: Reason codes with automatic charge-off are not permitted here(F-28)

Hi All
I creted a reason code in obxl t-code and assigned a gl code in OBXL transaction code, But when I am trying to clear a payment with reason code in F-28, System is throwing the following error..Can some one tell me why i am getting this error?
Reason codes with automatic charge-off are not permitted here
Message no. F5605
Diagnosis
The reason code entered is designed to ensure that the payment difference amount is posted to an account specially set up for this purpose. Postings of this nature usually require additional specifications (e.g. tax code, business area). If the difference stems from a single open item, the necessary specifications can be taken from that item. In the case that led to this error message, however, the difference does not stem soley from one item, which means that this method cannot be used.
System Response
The reason code entered is not accepted.
Procedure
You can either select a different reason code, which would create a new open item for the customer or vendor OR write off the difference using the function Charge off diff.. This function either takes you into a pre-configured account assignment model or into the document overview. From here you can enter the required difference postings.

Hi Venkata,
It seems while entering the payment (partial payment / residual items) ... you are clearing multiple items with differences. (e.g. if the difference amount is $30, then may the difference consists of two invoices underpaid by $15 each). In this scenario, F-28 doesn't know which additional account assignment fields should be picked up ... hence the error.
First of all, to validate that this indeed is the case, try clearing a payment with the same reason code where difference can be attributed to a single invoice. If you still get an error, then there is some other problem.
Then, to take care of a the business scenario where the difference can indeed be due to multiple documents, select "charge off difference" option and create an entry to post the difference as necessary.
HTH,
Manish Patel
Sr. SAP Solutions Consultant

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

Delivery is pulling items with different delivery dates from sales order

hi all,
i have a sales order with two line items with different delivery dates(eg 1st and 21st). material availability date for them is different. when i tried to create the delivery on 1st it is pulling the 2nd item whose delivery date is on 21st.
where can i control this.
thanks in advance
harini

Hi,
let us take one example>materials A and B,
A delivery date is 22.01.2008(maintained in schedule lines in SO)
B delivery date is 30.01.2008(maintained in schedule lines in SO)
now i want to deliver material A on 22.01.2008
by default system will give you only material A in the item line
material B will not be displaced in the second line item
now i want to deliver material B on 30.01.2008
by default system will show me material B in delivery line item
if in case material A is not delivered then delivery will show you two line items
i.e., Material A and B
i think you have understood the difference
regards,
US

Delivery Quantity is not equal to picked quantity.

Hi all,
I am having a issue related to VL02N VL01N.The issue is when we save the delivery which has materials with batch. and the batch quantity is less then the delivery quantity the system allows you to save the delivery with wrong delivery quantity that is the header quantity . and invoice is generated for the entire delivery quantity, Which is wrong.
The delivery should be saved with sum of all the batch quantity of the materials.
Could any one tell me how to save the delivery with the correct quantity.

Hi ,
Try adding the quantities of a item of the delivery and move this final quantity to the item quantity field . Perfrom this in save_document_prepare form exit of include MV50AZ1....
Hope this will solve your query... Award points if found useful...

Delivery quantity should not exceed order or confirm quantity

Dear Friends,
How to handle a below scenario,
Sales order is for 100 Tons.Partial delivery is allowed.
Now delivery quantity should be equal to 100 Tons.Delivery quantity should not exceed order quantity.
I mean delivery quantity must be equal to order quantity.
Thanks in advance.
Regards,
Shrikant

Dear Ram/Ramnath,
I have maintained the B for Check Overdelivery.Transaction code used is 0vlp.Item catg is TAN
Check Quantity 0 is A
Check Minimum Quantity is A
Now I ahve created a Sales Order for 10 Tons.
Created two delivery notes of 4 tons and 8 tons respectively.
While creating second delivery for 8 tons I do not get any error message.
Transaction code VOV7.Here completion rule is blank as it is relevant for Quotation and contracts.
Is there anything need to do?
Thanks in advance.
Regards,
Shrikant

Delivery quantity should not exceed order quantity

Hi,
in delivery delivery quantity should not exceed order quantity what should i do
please let me now what should i do it is urgent
Thanks in advance
Srinivas

Hi,
You may consider an enhancement with a user exit:FORM USEREXIT_SAVE_DOCUMENT_PREPARE in include MV50AFZ1.
Here you can put additional conditions to check the delivery qty and also can put a message for the user to correct the delivery qty in case he has manully increased it.
Please reward points if this helps.
Hemant

I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

I was in a chat box with skype and I clicked on the link to copy the text but it came back with "can't copy becuse not permitted in your browser"

I was in a chat box with SKYPE and I clicked on the link to copy the text but it came back with "can't copy because not permitted in your browser"
I can highlight copy and paste from other web screens with no problem.
The chat window however doesn't give access to the lines that have scrolled past the window so highlighting the text won't work. Other chat windows grab the entire text when the user clicks on the copy link or icon.
I just installed firefox and haven't tried other chat windows to see if the problem could be repeated.

Use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard

Mulitple line items with partial delivery in IDOC

Hi,
This is the scenario
I am testing 855 inbound PO confirmation using we19. How can I test with multiple line items for partial delivery. I have created new segment for each line item(E1EDP01). For one line item the scheduled quantity is less than the ordered quantiy.
Guys Please can u help me on this
Regards
Andy

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Items with zero stock quantity show negative stock value in Stock reports

When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value (negative value in my case)
How can this happen, and how can I correct this situation ?
System parameters are : negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
P.K.Johnsen

Hi Johnsen,
I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
Thanks,
Joseph

Copy/paste "Error list" Items with errors as plain text ?

When I attempt to run a Labview project main.vi I get a long "Error list" window, listing many .vi files within the .lvproj as "Items with errors". I would like to get this listing as a plain text file for documentation purposes (another developer checked this code in, and it is supposed to be working). However the small window cannot be resized very much and it is not a plain text field that I can copy and paste in the normal Windows way. Is there a way to export these errors as plain text?

Thanks for the responses. I'm using Labview 2014 SP1 Version 14.0.1 (32 bit) on Windows 7.
Certainly I do need to talk with the other guy but he won't be back for some weeks. The errors I have cause a "broken arrow" condition so the program does not even start. Does an error handler at the end help me in that case? Yes I can do a screen shot, but there are so many errors it would take about 5 screen shots to scroll through the (fairly small, non-resizeable) dialog box and capture them all.
I was hoping for an easy way to capture this, but now my guess is that LabView was just not intended to work that way. I'm more used to other programming environments, where errors were always available in plain text format.

Schedule line item with no confirmed quantity

I encountered that the schedule line item has no confirmed quantity. What are the possible reasons these happened?
Thanks.

Hi,
The 1st reason could be no stock ( can check using T.code .MMBE).
2nd reason could be not relavent for avaliability check ( check in VOV6 select the relavent scheduline category and check in transaction flow tab field availability if checked)
3rd reason could be either the customer is blocked for his credit.
Kindly Reward points if useful.
Regards
vK

Error:An item with no delivery quantity is not permitted.

Similar Messages

Maybe you are looking for