Error code 1603 While deploying symantec Endpoint protection through MDT Task sequence as Install a single Application
Hi ,
Am getting Error code 1603 (fatal error during installation) while deploying the SEP through MDT task sequence . am not getting such issue regularly but some time am getting and need to be fixed.
Shailendra
Shailendra Dev
Hi,
I am Chetan Savade from Symantec Technical Support Team.
Logs can provide more detail info, as said earlier by MrBrooks provide SEP_Inst.log from the affected machine.
Adding Windows defender related articles if they can help you:
Keeping Windows Defender Enabled when Deploying and Installing Symantec Endpoint Protection Client package.
http://www.symantec.com/docs/TECH168501
Windows Defender startup type registry value is Manual instead of Disabled after installing Symantec Endpoint Protection
http://www.symantec.com/docs/TECH206793
How to prepare a Symantec Endpoint Protection 12.1.x client for cloning
http://www.symantec.com/docs/HOWTO54706
Best Regards,
Chetan
Similar Messages
-
Installing Symantec endpoint Protection installtion failed
Hi ,
I have Symantec endpoint protection and have setup.exe. I have create a package and created a program as
setup.exe /s /v"/qn RUNLIVEUPDATE=0 REBOOT=REALLYSUPPRESS" but unfortunately installation fails as part of Task sequence.
just wondering if I am using some wrong command line arguments...pls. share any pointers. pls. find the screen shot attach from smstslog
Regards.Hi,
I am Chetan Savade from Symantec Technical Support Team.
See if Windows defender is causing any issue.
Can change it to setup /s /v"/l*v log.txt /qn RUNLIVEUPDATE=0 REBOOT=REALLYSUPPRESS DISABLEDEFENDER=0"
Refer these articles:
Keeping Windows Defender Enabled when Deploying and Installing Symantec Endpoint Protection Client package.
http://www.symantec.com/docs/TECH168501
Using MSI Command Line Switches to install Symantec Endpoint Protection (SEP) 12.1 fails to install or fails to abide by switch parameters
http://www.symantec.com/docs/TECH177946
MSI command line reference for Symantec Endpoint Protection
http://www.symantec.com/docs/TECH102668 -
Symantec Endpoint Protection Manager Installer Information Script Error
hi
I can't install SEP Manager 14.1 in our windows 2012 R2 server I got an error during the installation.While was installing symantec endpoint production 14.01 , I am getting an error right at the end of the install. I understand that . I should do it with
vbs running for symantec installing. however I dont know How can I do it ?,
"Symantec Endpoint Protection Manager Installer Information - Error 1722. There is a problem with this Windows Installer package. A
program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RunFIPSScript, location: c:\Program Files (x86)\Symantec\Symantec Endpoint Protection Manager\bin\, command: C:\Windows\SysWOW64\...\FIPSMode.vbs"
-install"Hi,
I am Chetan Savade from Symantec Technical Support Team.
I think you are talking about SEP 12.1 product. There is not any product by code 14.1.
With reference to mentioned issue there is a Public Kb available. Refer the following KB:
Symantec Endpoint Protection "Error 1722: There is a problem with this Windows Installer package..."
http://www.symantec.com/docs/TECH103131
Possible Solution as per KB: To fix the problem, run the Windows Installer CleanUp utility and then remove Symantec AntiVirus manually. Then, install Symantec Endpoint Protection again.
To learn how to obtain and use the Windows Installer CleanUp utility, read the
Microsoft article Description of the Windows Installer CleanUp Utility.
Click the entry for Symantec AntiVirus or Symantec Client Security, and then click Remove.
If more than one entry appears, remove the earliest program version first. After you remove all entries for Symantec AntiVirus and Symantec Client Security, remove Symantec AntiVirus manually.
To find directions for your version of Symantec AntiVirus, read
Manual uninstallation documents for Symantec Client Security products.
Symantec connect forum link to raise SEP related issue: https://www-secure.symantec.com/connect/security/forums/endpoint-protection-antivirus
Best Regards,
Chetan -
I purchased a 16gb ipod touch 1 gen and it wont restore or show the battery chaging icon. It shows the symbol of usb cable and what appears to be an itunes symbol without the itunes words being displayed. Upon trying to restore I have gotten error codes 1603 & 1604. I referred to the apple website for assistance and followed the steps to the letter with no results. So what else should I try or could I try because I have has no such luch thus far? I have held the home button and power button I tried to enter DFU mode but unsuccessful due to the screen boots with apple logo then immediately goes to the itunes screen and no further only when connected. Will not power on without usb connection have charged battery to see if it was the issue and no battery bar locator displays with or without being connected to PC.
So you did all this:
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1603
Did you try the last paragraph too? -
BSOD on XP with Zenworks and Symantec Endpoint Protection
After upgrading to Symantec Endpoint Protection (SEP) we are getting Blue Screen after imaging.
We have SEP included in our image and after pushing the image to another computer, we instantly get a BSOD, when trying to boot up the newly imaged machine:
*** STOP: 0x00000024 (0x00190203,0x8A4B0DE8,0xC0000102,0x00000000)
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
For test purpose I have tried doing the imaging job with Ghost 2003. This works perfectly, so I guess it is the combination of SEP and ZfD that is causing the problem. If I exclude SEP from the image, imaging with ZfD works fine. Imaging with Symantec antivirus ver. 10 also works perfect.
Anyone out there running ZfD and SEP 11?
Environtment:
Windows XP SP3
ZfD 7.01 sp1 ir1 running on Netware 6.5
Symantec Enpoint Protection 11.0.3001.2224 (getting the same error with 11.0.2010.25)There should an updated patch for ZDM7 available withing a few days. (ZDM7
SP1 IR3A HP1.)
I would strongly suggest testing with the updated files when they are
released.
The is a much newer Linux Kernal starting with IR3A which could effect your
problem.
If you are still seeing an issue, I would suggest opening a ticket with
Novell.
Unless somebody here happened to have a copy of SEP, helping here would be
tough.
But I have not heard of this issue myself, but anything is possible.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"martinusen" <[email protected]> wrote in message
news:[email protected]...
>
> After upgrading to Symantec Endpoint Protection (SEP) we are getting
> Blue Screen after imaging.
>
> We have SEP included in our image and after pushing the image to
> another computer, we instantly get a BSOD, when trying to boot up the
> newly imaged machine:
>
> *** STOP: 0x00000024 (0x00190203,0x8A4B0DE8,0xC0000102,0x00000000)
>
> Disable or uninstall any anti-virus, disk defragmentation or backup
> utilities. Check your hard drive configuration, and check for any
> updated drivers. Run CHKDSK /F to check for hard drive corruption, and
> then restart your computer.
>
> For test purpose I have tried doing the imaging job with Ghost 2003.
> This works perfectly, so I guess it is the combination of SEP and ZfD
> that is causing the problem. If I exclude SEP from the image, imaging
> with ZfD works fine. Imaging with Symantec antivirus ver. 10 also works
> perfect.
>
> Anyone out there running ZfD and SEP 11?
>
> Environtment:
> Windows XP SP3
> ZfD 7.01 sp1 ir1 running on Netware 6.5
> Symantec Enpoint Protection 11.0.3001.2224 (getting the same error with
> 11.0.2010.25)
>
>
> --
> martinusen
> ------------------------------------------------------------------------
> martinusen's Profile: http://forums.novell.com/member.php?userid=26795
> View this thread: http://forums.novell.com/showthread.php?t=345351
> -
Error Code 8024200D while installing update KB3000850 for Windows 8.1
Error Code 8024200D while installing update KB3000850 for Windows 8.1
I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
Hi Michelle,
Thank you for posting your query in Microsoft Community.
I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
Is your computer connected to domain?
Which security software is installed in the computer?
Do you remember making any specific change in the computer prior to the issue?
This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
improvements.
Cause:
This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
check the status.
Method 1: Depending on the architecture of your
Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
All supported x86-based versions of Windows 8.1: [link] Download the package now.
All supported x64-based versions of Windows 8.1:
[link] Download the package now.
Restart is required.
Method 2:
If the issue still persists, run the Windows Update Troubleshooter and check the status.
Click to run
[link] Windows Update Troubleshooter
Also refer to:
[link] Troubleshoot problems with installing updates
Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
Regards,
Niranjan Manjhi
Dear Niranjan,
Thank you for your answer.
To answer your questions:
1) Yes, my laptop is connected to the domain,
2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
In your answer, you suggested 2 methods for resolving the problem.
I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
Potential Windows Update Database error detected Ox800F08F: Not fixed
Windows Update components must be repaired: Fixed
And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
Michelle
Hi Michelle,
Thank you for keeping us updated on the issue.
Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
Please post your question in the link TechNet Forums.
Regards,
Niranjan ManjhiHi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Symantec Endpoint Protection 12.1 and Peopletools 8.53
Hello,
We're currently enabling virus scan for PT 8.53 with Symantec Endpoint Protection (SEP) v12. However, we are unable to configure it correctly. Our set up looks like this:
* PS webserver is insatalled on server 1, this is where we configure the virusscan.xml file
* SEP 12 is installed on a separate server, server 2. client and SEP manager is installed on this server.
* OS is Windows 2008 R2 64-bit for both servers.
May I know if anyone here have successfully used SEP for scanning attachments?
Unfortunately, as per oracle, only symantec scan engine was verified to work with peoplesoft, other versions are still not tested to work.
another question is, what should be the value for the virusscan.xml parameters below?
<Provider>
<name>SymantecManagementClient</name>
<class>psft.pt8.virusscan.provider.GenericVirusScanProviderImpl</class>
<icapversion>ICAP/1.0</icapversion>
<service-name>/SmcService</service-name>
<policycommand>?action=SCAN</policycommand>
<address>server2</address>
<port>8014</port>
<disable>false</disable>
</Provider>
we've mixed and matched the available service names from server 2, but we are still getting the error below:
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
INFO: Input OPTIONS Header = OPTIONS icap://server2:8014/SmcService ICAP/1.0
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
INFO: OPTIONS recieve header= HTTP/1.1 200 OK
Date: Tue, 10 Sep 2013 15:14:19 GMT
Server: Apache
Allow: GET,HEAD,POST,OPTIONS
Content-Length: 0
Connection: close
Content-Type: text/plain
ICAP header = ICAP/1.0 200
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient scanStream
SEVERE: Unable to connect to the Scan server SymantecManagementClient; Reason = CONNECTERROR
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
INFO: Scanning completed using provider = SymantecManagementClient Provider classname = psft.pt8.virusscan.provider.GenericVirusScanProviderImpl
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
INFO: Finish Scanning Request.
port 8014 is the client communications port for SEP and its the only port that gives us a response (INFO: OPTIONS recieve header= HTTP/1.1 200 OK..etc), when we try other ports we get a "SEVERE: Unable to connect to SymantecManagementClient" message on this line.
Hoping for your responses, thank you in adance for your help.Hello,
Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories. -
Oracle RAC and Symantec Endpoint Protection
Hello DBAs
I am installing Oracle 1gR2 (10.2.0.3.0) two node RAC on Windows 2003 Server.
The client has installed Symantec Endpoint Protection on the servers. It didnt allow us to install the clusterware successfully.
But we disabled the whole syamntec service and installation went smooth.
After that today we enabled SEPP and Clusterware services are not coming up properly...
Is there any setting in SEPP to be disabled or enabled ........
Please help...
The client needs SEPP itself on the server.
This is a Priority one case...Installer on site....
Please help...Hi Mahesh,
for: "+After that today we enabled SEPP and Clusterware services are not coming up properly...+" would be good to know why it did not come up... Besides, did you try restarting Clusterware before enabling SEPP? Just to be sure that the restart would work fine at all (without SEPP enabled). Anyways, while I assume the latter, we need some CRSD / CSSD and event manager information why clusterware would not start up.
Well, let me try a wild guess first (I was lucky lately ;-)): Do you use OCFS? If so, first thing, you may want to try is: exclude all OCFS file systems from SEPP.
Hope that helps. Thanks,
Markus -
T6x: IP Conflict after sleep mode using Symantec Endpoint Protection server.
Here is the problem I'm having: We have several t6x laptops running various versions of Vista (business, enterprise, ultimate, x86 and x64), and we have Symantec Endpoint Protection server with client distributed to laptops.
Every possible thing is at the latest level downloadable from MS, Symantec, Lenovo. HW is not malfunctioning in any way.
If a laptop enters sleep mode and wakes up, windows return an error stating there is an IP conflict with the other computer on the network (with the same IP address and the same MAC addr !?). Other than that bluetooth and tpm drivers fail as well.
If Endpoint protection is uninstalled laptops wake from sleep/hibernation without problem.
If anyone has a clue what is going on please share the info...
moderator note: title specified.
Message Edited by Agotthelf on 24-03-2009 05:25 PMHello redrum781, welcome to Lenovo forums!
I have done a forums search for "symantec endpoint protection".
It reveals there were a lot of problems with it, wireless disconnects or C++ errors.
I would suggest to use a different antivirus solution, if this is applicable for you.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
I can't print with symantec endpoint protection
I can't print with symantec endpoint protection.
I have to disable the firewall, or reboot my windows 7 computer for the print job to print. Any ideas what is blocking the printing process and how do I allow so I can print using my HP P2033dn that is connected via ethernet to my time capsule. ThanksIn the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
[ excessive quoting removed by admin ] -
Symantec Endpoint Protection on Mavericks Reviews??
It seems like everyone has a review or has reviewed Symantec Norton Internet Security and Norton Antivirus yet not too much has been tested or written on Symantec Endpoint Protection.
Unfortunately we are moving in a direction where we will be installing Symantec Endpoint Protection on all our macs and I am trying to find reviews, whether personal or professional, about SEP and macs.
I know Symantec products in general have been trashed on for mac for a while now but it seems I can't find a good AV test out there that includes it for Mac (as most only contain the two symantec products I mentioned above)
Anyone have any personal experience, or know of any testing done with the Symantec Endpoint Protection on macs within the past year?Hello Everyone,
I am Chetan Savade from Symantec Technical Support Team.
You can directly install an unmanaged or managed Symantec Endpoint Protection client on a Mac computer if you cannot use or do not want to use Remote Push. The steps are similar whether the client is unmanaged or managed. The only way to install a managed client is with a package you create with Symantec Endpoint Protection Manager. You can convert an unmanaged client to a managed client at any time by importing client-server communication settings into the Mac client.
Check the following articles:
Compatibility between Symantec Endpoint Protection for Mac and versions of Mac OS X
http://www.symantec.com/docs/TECH131045
Symantec Endpoint Protection for Macintosh Frequently Asked Questions (SEP for Mac FAQ)
http://www.symantec.com/docs/TECH134203
Send me DM here https://www-secure.symantec.com/connect/user/chetan-savade if you need any assistance with SEP for MAC.
Best Regards,
Chetan -
Installation failed with error code 1603
Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
NaveedI have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done -
Why is the Error Code 0x8002006E While Burning the Disc?
Hey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help!
Model: iMac (21.5-inch, Mid 2011)
OS: Lion OS X 10.7.4
I have the latest software updates and Firmware updates installed.
Thank you,
Sivarama Krishnan (kvsrkrishnan)
<Edited by Host>I found this article excerpt:
The few solution that where found where by calling at Apple and get technical support. There are a few solutions that might work.
The first one would be Go to users > your computer name / user name > library > Preferences > com.apple.finder.plist and delete this file. Also it’s advised to keep the burn speed at 8x.
The second solution found that Apple technical support gave is to unplug everything, including the AC power cord and then remove the battery. Press the power button for 10 seconds without replacing the battery or attaching the AC power cord and after the 10 seconds are up replace the battery. After the battery is in slot hold down the following keys with the left hand: Option + Apple (command) + R and with the right hand hold down the following keys: P + Power Button. You will need to hold all 5 of these buttons at the same time until you hear both sets of startup chimes Release all of the 5 buttons after you hear the two startup chime sounds.
Hope this helps -
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellmeWell here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance! -
I got the Mac error code -36 while trying to move a backup file
I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is:
The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.
Maybe you are looking for
-
I have an iphone 5 synced to my mac and also connected a samsung s3 to kies(samsung alternative to itunes). For some reason i now have all my dads contacts as well as my own and vice versa. How can i stop this happening?
-
Why does my Ipod play at a low volume? When I have my earbuds in I have to have it at almost full volume, and when I plug it into a boombox it doesn't play as loud as the radio or a cd. I have the volume limit turned all the way up in the settings
-
Trouble viewing online videos (streaming issue?)
Hello. I'm having trouble watching online videos. Video podcasts downloaded in iTunes are fine, but if for instance I want to watch a TV show online or a video clip from a news website, the picture is choppy and the sound breaks up. It's as if it isn
-
Adding dimension labes for "Pages" in simple dataform
is it possible, or labels only allowed for dimensions in composite forms?
-
Regarding installation and usage of oracle forms 11g on windows 7
dear all, i am new to the oracle forms and reports feature. i tried installing forms and reports following certain steps which i could find from the internet, but it could not be installed. i ended up crashing my system.can anyone of you help me in p