Error While Entering Transfer Postings

Hello Friends,
When i try to enter transfter postings, click on TO PURCHASE ORDER push button, i am getting error " NUMBER RANGE FOR TRANS/EVENT WA IN THE YEAR 2012 DOES NOT EXIST", can any one pls help me how to rectify this error .
Thanks
Krish
Moderator message:
Locked. Please try to search for answer before posting.
Please also read the forum rules and guidelines.
Edited by: Csaba Szommer on Feb 19, 2012 4:20 PM

Hi,
Use tcode OMBT click on the groups button, select the
Material documents for goods movements and inventory diffs.
WA and maintain number range for WA for 2012
Regards
Kailas ugale

Similar Messages

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error while activating Transfer Structure

Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,

Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

Hi,
I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
1. Transfer structure 0CUSTOMER_TEXT_BA does not exist and
2. Data element for TXTMD could not be created.
Can you please suggest me how to resolve these issues ?

did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

Error while activating transfer structure and communication structure.

Hi all,
I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
I mean same datasource comming from two R/3 instances and connecting to one infosource.
<b>Maximum length of segment is 1000 characters, current length is 2567</b>
Please let me know.
thanks,
Sabrina.

Hi Sabrina...
there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
Anyway, it suggests:
"the transfer method in the transfer rules must be set to TRFC with ODS"
Hope it helps!
Bye,
Roberto

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

Error while entering the time card

Hi,
while entering the time card,I am getting the error in APPS.PA_OTC_API api.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20020: Pa_Otc_Api ::: ->Validate_Otc_Data->Validate_Process :: Check for quantity being negative. : ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-01403: no data found

Hi
Please clarify where are you entering the time card.
Is it on a form of Preapproved expenditures? Are you using OTL, or any other time application?
Are you are trying to load transactions thru the PA interface?
Dina

Error while entering transaction for a new customer in release 12.1.1

Hi,
I created a new customer in receivables (am using the version 12.1.1)
First i got an error while creating the customer saying, "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively"
I corrected the profile class amounts and now am allowed to create the customer but now the error comes while entering a transaction for this new customer:
"The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system administrator"
please suggest a solution.
regards,
Shilpa

I faced the same problem, Doc ID 420194.1 solved the problem. Shilpa kindly post the solutions moving forward so the users can benefit from it. Thank you!
Solution
run Geography Reference Program with parameter "Country code" for all records.
Navigate to Trading Community Manager ->
Requests -> Run
Select "Geography Name Referencing" program
Processing for Table : HZ_LOCATIONS and Run Type : ALL
Parameters: Country Code :US
Usage Code :ALL
From Location Id :NULL: To Location Id:NULL
Start Date :NULL: End Date:NULL
Number of workers:1
Total number of Processed Locations:9
Number of Successfully Processed Locations:9
Number of Locations in Error:0

Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Error while doing transfer posting

Hi,
While doing transfer posting I am getting an error given below:
"Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
Please help me in this regard.
Thanks in advance.
Sonal

Hi,
Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
Also check if there is any return material in the storage loc.
Regards,
satyajit
Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM

Error While entering GR/GI slip number in MIGO (Message no. NR751 )

Hi Experts,
While entering GR/GI slip number in MIGO,system throws an error
"For object XABBELEGNR , number range interval does not exist OMJ6"
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code: OMJ6
Configuration settings are already done in OMC1.
external number range already maintained for this plant and year 2010 in OMC1 OMJ6 .but still this error comes.
would appreciate the help.

Check these links:
Posting a "goods issue" msg NR751
Re: GR posting problem
Check in OMR4 - document types in IV - document type assigned to Tcode MR11 (say KP) and then check document type tab in same Tcode for number range series assigned to doc type KP - maintain series in FBN1. You can check in NRIV database table with object RF_BELEG for number range series maintained.

Tax code error while entering Expense Receipts in TRIP transaction

While entering Expense Receipts in the transaction TRIP (Travel Manager), I get an error saying..
"Entry TAXUSJ V0 does not exist in T007A (check entry)".
1) Please help me understand the cause for this error. As the Travel Expense system is connected to the FI (Finance) system, is any config in the FI table causing the error?
2) Please suggest how to resolve this error.
Thanks

Hi,
TAXUSJ--Sales Tax USA w. Jurisdictions and VO is a Tax code.
Please mainbtain above combinations in below tables and try
GOTO SM30
J_1BTAXCODEV
J_1BTXMMCV
V_T007A_DEF
Bhairavareddy
Edited by: Mudupu123 on Dec 14, 2010 8:04 AM

Error while entering number range

Dear All
While entering number ranges for Assets using t-code AS08 i am getting the following error:
Company code........ 2000 does not exist
Message no. NR011
The company code 2000 is assigned to Chart of depreciation also.
Please advice.
Thanks & Regards
Kanwaljit

Hi,
In AO11, for your company code 2000, you might have assigned a diff company code for number range as cross company code asset number range.
Change it to 2000 and then go to AS08 and enter 2000 and enter the required number range intervals to it.
Thanks,
Srinu

Error while entering Applicant Data PB10

Dear Experts...
While entering the initial data of applicant when in save the data ann error occurs : "No application assigned to this applicant no. (Infotype Application)".
I have checked all integration components they are working fine. I also check the number ranges they are also assigned properly. Plz help.

Dear Delik...
I am selecting that.... Even then system gives me error....Even number ranges are properly choosen and activated. Basically this is not error message....its simple message but system doesnot allow us to save the data. Simple message means it is marked with Green tick... not red cross.

Error While Entering Transfer Postings

Similar Messages

Maybe you are looking for