FBL5 mass change error

Hello,
I am using t-code FBL5 to update the payment method to 'I' and want to set the Part bank type to use a specific bank account.  I get an error that Field 'BSEG-BVTYP. does not exist in the screen SAPMF05L 1301'   Mass change uses bdc to call FD02.  When I go into FD02 to the additional data screen, the fields indeed does not show up (the field is on the screen but set to invisible). 
Any ideas what needs to change to get this field to show up?  Is this config or a program error/
thanks!
Brent

Are you sure you are changing the correct line item in this case?
Sorry - I was thinking of another transaction.
Rob
Message was edited by:
        Rob Burbank

Similar Messages

  • Material BOM mass change error

    Hi gurus,
    When doing mass change of BOM via tcode CS20, i'm getting below error result.
    The following messages were displayed:                                                                               
    Material BOM 00016478 : Delete Item(s)
       19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
       0130 L 01/01/2002 12/31/9999              1.00  PC     >               1.00  PC
       No batch input data for screen SAPLSDDT 0010
       Folder created/extended
    I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
    I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
    Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
    Hope to hear advise from you all on how to deal with this.
    Thanks and regards,
    Chad

    Dear,
    Error message no is 00344 ?
    Please refer the OSS note  Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
    Regards,
    R.Brahmankar

  • OCL 4.5.1:  Mass Changes; error received when creating CDS

    I receive the following error when attempting to create a Response Mass Change with the following criteria:
    QG Name: XX
    Question Name: YY (Single CHAR variable with default text, only one question specified)
    Criteria:
    Response, (<XX.YY$F> like '%±%')
    Error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at "RXC.RXCMCMCS", line 30
    ORA-06512: at "RXC.RXCMCCRTCDS, line 1107
    ORA-06512: at "RXC.RXCMCCRTCDS, line 1477
    Any help is greatly appreciated.

    Thanks Satish,
    It seemed that this problem was going to go away on its own as we ceased to need the mass change. However, it has arisen again.
    I have no problem creating a like set of criteria using responses. It is only when the special character is included in the filter that the error appears. It is somewhat odd as the character renders correctly in other areas of the interface, however, I begin to wonder if isn't still fundamentally a characterset issue.
    Despite the efficiency of using the special character in the sql statement, I think I will need to simply define the change in another, probably more laborious manner to correct the problem.
    Any further ideas are welcome.
    Thanks again,
    JK

  • Mass change of Vendor Line Items Payment Terms

    Hi all
    We are trying to make a mass change of payment terms for vendor line items.  We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed.
    The log gives us the following error - 'Field BSEG-ZTERM. does not exist in the screen SAPMF05L 1302'.
    Please how can we solve this error.
    Many thanks
    PRG

    Hi,
    According to note 640908:
    " Notes on error handling:
        If the mass change does not occur as required even though you
        changed and activated all program parts, note that the error log
        for the mass change (Environment -> Mass change -> Error log of
        line item list) may contain useful information for error
        handling."
    " Note: SAP cannot guarantee that the modified mass change will work
      correctly even if you carry out all of the steps as described in the
      manual tasks."
    It is not planned to enter the payment terms by using of
    the field payment term ZTERM but by using of the fields ZBD1T/ZBD1P and
    ZBD2T/ZBD2P and ZBD3T.
    With Best Regards,
    Gladys Xing

  • Mass Change of Functional Locations - error message "Objekt PM_MASS.....

    Hi Experts,
    We have activated autorization object I_MASS - to make it possible to carry out Mass Change on Functional Locations.
    The  menu patch are now visible - but I get error message "Objekt PM_MASS_TECH_OBJECTS is not maintained"
    How is that done in SLG0 - any one have experience?

    Hi Pete
    Thanks for helping
    Best Regards
    Keld

  • Releasing Mass Change Worklist-Error Message No Administrator for this task

    Using transaction AR01 we create a Worklist and assign it to the Substitution Rule.  When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message.  "No Administrator for this task".  We've tried a user id with SAPALL and still get this error message.
    Does anyone know what this means and how we can get around this message?

    We have this working in our Test system without having to set up any workflow tasks for Fixed Assets.  I'm wondering if this has to do with the Productive client settings.  We had to make some changes so that we could use transaction OA02 in a Productive client.
    Any suggestions would be greatly appreciated.

  • Error in mass change for info records -MEMASSIN

    Hello Friends,
    We want to mass change the info records. We want to set the "Unlimited del" indicator to all the Info records which is not there currently.
    When we tried to do the same, we came across an error saying  -
    "5300177458 : Enter Purch. Group (5300177458)" ....message type ME083.
    but purch grp is maintained in all the Info records.
    Can anybody help us to fix this issue ?
    Thanks in Advance,
    Vidyadhar.

    Hi all,
    Thanks for your inputs.
    1st thing - pur grp is maintained in customizing also. ..not deleted in customizing.
    2nd thing - in MASS trans selection, I selected pur org, plant, and unlimited del options....still its giving me the same error.
    any other solution pls ?

  • Service Desk - need IB52 iBase "partner assignment" mass change

    Dear Ladies and Gentlemen,
    We are using SAP Service Desk in Solution Manager 7.0 EhP-1.
    There are many satellite systems connected to SolMan using Service Desk.
    Of course all of them are setup in SMSY, have a valid iBase entry in IB52, and have the "sold-to-party" assigned in IB52 -> Goto -> Partner.
    Now we need to assign a new business partner as "sold-to-party" for all these systems.
    We do not want to rename the current business partner, but have to assign a new business partner to not influence existing tickets.
    Thus, manually we would need to go to IB52 and change the partner assignment in IB52 -> Goto -> Partner and enter a new value for all the systems.
    Q: is there a way to perform a mass change for the "sold-to-party" partner assignment of the iBase entries? Is it possible to update or replace all or multiple existing partner assignments in iBase?
    Many thanks,
    Peter

    Hi Christian,
    Can you please tell me how did you create iBase for NON-SAP Systems? I know it is IB51/IB52? I am not sure what do you do after that? For an example I went to IB51 and create iBase number 403? now I go to IB52 and put the 403 in the installed Base field and click on Green arrrow to go inside correct? what do I do after that? where is the options to create the iBase name call "Network Group" ?
    How did you solve your issue for not showing when you went to F4 in NOTIF_CREATE? was that authorization error? if yes, do you know the object name?
    any help is much much appreciated
    Thanks in Advance
    Kumar

  • Contract Mass change enhancement in SRM 7.0

    Hi Experts,
    We are using SRM 7.0 & implementing new Contract mass change functionality for header P.Org. & P. Group data. I have created a Web Dynpro Component (with View similar to /SAPSRM/WDC_UI_AO_CT_MC_D), & implemeted a BADI /SAPSRM/CTR_MC_BADI & added an entry in Table BBPV_CTR_MASSOP.
    After selecting the change method i am getting the error "View O_V_PURCH does not exist in the component YWDC_UI_AO_CTR". Actually, O_V_PURCH is an outbound plug of the WEb Dynpro Component. I am not sure why this eror is coming.
    Could you please help me out in this. That will be a great help.
    FYI - I am using Operational Contract Configuration document as reference.
    Thanks & Best Regards,
    Vishnu

    Hi Azad,
    Thanks for the reply.
    I checked that the outbound plug is linked to the Window correctly. I do not understand why the plug is considered as a view.(as per the error message"
    Thanks & Best Regards,
    Vishnu Reddy

  • Validation not working during Mass Change of Vendor Line Items

    Hi All,
    I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
    Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
    I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
    Please provide your suggestions in resolving this issue.
    Thanks
    sandeep

    Hello Sandeep,
    I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
    Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
    I hope this explains the behaviour.
    Thanks and regards,
    Suresh Jayanthi.

  • Mass Change ERS in PO + BAPI

    Hi All,
    I need to make mass change in lot of PO at itme detail level. I need to uncheck ERS and GR based IV check box in invoice tab.
    I dont want to make use of Mass change tcode for this as it cause lot of work and chances of manual error are lot.
    I have never used BAPI in LSMW  but I have come accross BAPI for PO Change......I am pretty good at recording method in LSMW but I think that wont help me in this case due to the table control in PO. I have also found a tutorial on BAPI + LSMW for PO creation so I got some rough idea for it.
    Can someone tell me the sturucture I should use for the BAPI in LSMW for my requirement and the points which I need to take care of. also tell me do I have to actiavte the inbound idoc processing for it.
    Please guide....
    Also suggest if i need to create 2 flat files for this ....like 1 for header and antoher 1 for item level.
    Edited by: Sap: IN on Apr 30, 2011 2:36 PM

    I am able to map my flat file with the structure sucessfully
    But I am facing problem
    1. IDOC segment E1BPNEPOITEM  does not have the field GR based IV and ERS.
    requirement : as I want to remove these 2 check boxes from couple of PO for different line item I have mapped the fields with the segement mentioned above but I am passing blank value from my flat file...so in the display imported data I am getting PO number and line item number and for those 2 field blank value.
    due to this in the step display converted data those 2 fields along with all the fields of the segement itme data are blank and so the IDOC gets created with out any field in the item segment.
    question: how to over come this problem ...I need thoes 2 field in the segment but with balnk value. as the check box need to be unchecked in the po.
    Edited by: Sap: IN on May 1, 2011 11:56 AM

  • Mass Change for Parked documents in FBL1N

    Hi Friends,
    Please help me on the following client requirement...
    When the user wants to do the mass change (eg..payment block remove) for parked documents in FBL1N transaction, he is getting the error "Unable to change every document".
    System Response
    The items from the documents not changed are marked in red.
    Procedure
    You can display a change error log for each of these items (function in application toolbar). In the individual document change procedure you can check which fields are changeable and change the documents individually if necessary.
    Kindly respond.
    Best regards...

    The error message is self explanatory.
    You are trying to change fields which are not changeable. You view the change error log. Rectify the errors and try again.
    Else you can try FBV2 to view list of documents and change individually.
    Rgds
    Harmees

  • Mass change of certain fields thru list of equipments IE

    Hi,
    Instead of writing LSMW, i am looking for mass change option for list of equipments available thru IE05 under Go To----> Carry out a mass change.
    Its giving me a error message :
    Objekt PM_MASS_TECH_OBJECTS is not maintained
    Message no. BL010
    Diagnosis
    An application log entry is to be made for object PM_MASS_TECH_OBJECTS. This object is, however, not maintained as an application log object.
    Objects and subobjects of the application log are created using transaction SLG0.
    System Response
    The program had to be cancelled.
    Procedure
    Inform the system administrator.
    I went thru the forum link: Mass Change of Functional Locations - error message "Objekt PM_MASS..... and read the note 1166820.
    Please tel me the steps to do in order to include Object    : PM_MASS_TECH_OBJECTS
    Object Text: Mass Change of Equipments and Functional locations
    in table as per the note...
    Please provide some detailed steps..
    Authorization is no issue as i have profile: SAP_ALL
    Thanks
    Murad..

    Hi All,
    i'm trying to change a filed value as null. i.e. a value is maintained in pp work centre field for functional location.  i want to delete this value to keep this field as blank. By using this mass change functionality i'm not able to do so. can any body hep me out to this problem.
    Raj

  • Mass changes in PO's - Change vendor number

    Dear Expert,
    I would like to know your advice.
    I have one clinet requiremnet , they want to do some mass changes in a PO's -  they want to change the vendor code in a purchase orders.
    these purchase order just created and not any inventory or financial posting has been done.
    Some PO's are released completely and some are not released completely.
    They want to change the vendor , the new vendor which they want to incoroporate is having different payment terms and also the partner function may vary.
    The new vendor is from same location and country.
    I tried in MASS but it is giving some error messages like PO is still faulty and not allowing to make a changes.
    My Question is :
    1.If we want to do the chages then is it possible?
    2.If yes then what are the min things needs to be consider while doing the changes ( which data or fields of vendor master from old to new vendor)
    3.is there any other way to do changes other then MASS.
    4.Is it a advisable to change a vendor ( if possible) or shall i write to the client that cancel the all existing PO and create new PO with ref to old PO for new vendor.
    Kindly advise on above.
    Thanks

    Hi ,
    Thanks for your response.
    I would like to add on my existing things,
    The PO's those are partial release , I can cancel those partial release and can able to bring to the original status( w/o any released)
    Is it possible if the PO is not at all released then we can make a changes.
    Appreciates your earnest response.
    Thanks

  • Maintenance order Operation mass change with Ehp5

    Hi Experts,
    We are currently working in ECC 6.0 Ehp3 and we are exploring the additional features with Ehp5.
    To explore the Ehp5 functionalities (Maintenance order Operation Account Assignment and Operation mass change) we did the foloowing:
    1. LOG_EAM_CI_2 to LOG_EAM_CI_5  and LOG_EAM_LINEAR_1 business function is activated
    2. LOG_EAM_OLC: Operation Account Assignment business function is activated
    3. Under Define Cost settings configuration, the relevant Plant and Order type checkbox is activated
    4. The user role is adjusted to enable the Maintenance order Operation mass change functionality
    Suppose the LOG_EAM_OLC business function is activated on 01.02.2012
    The Maintenance orders created before 01.02.2012 is allowed to do the Maintenance order Operation mass change.
    But the Maintenance orders created after 01.02.2012 is not allowing to do the Operation mass change and throwing the error message.
    Error message: Operation Account Assignment orders (order type XX) are not supported
    Program name: SAPLIBAPI_ALM_ORDER_PROCESSING
    Message Class: ERP_CO_OLC_E (Messages for Operative Level Costing)
    Message number: 066
    I have reffered the supporting documents, but it didn't helped.
    Please help me.
    Thanks,
    Raj

    Hi,
    I expect the issue is with BAPI_ALM_ORDER_MAINTAIN. The mass change functionality usues this BAPI but the BAPI does not currently support OLC orders. When you try to change OLC orders via the BAPI (or the mass change functionality tries to do it) this is prevented and the error message is issued.
    At the moment, you will not be able to use mass change for OLC orders.
    -Paul

Maybe you are looking for