Final IV Indicator Check/Uncheck in PO Change results in PO Print

Hi
In ME22N when i check/uncheck the Final Invoice Indicator..... a new message with green Indicator is generated which is as well generating PO Print, inspite of removing Print relevant Changes for EKPO - EREKZ(Final IV Indicator) in Configuration.
If some can help me out as how to control this not to print.
Regards
Ratha

inspite of removing Print relevant Changes for EKPO - EREKZ(Final IV Indicator) in Configuration.
through coding we can control this ......get ur ABAPer help...

Similar Messages

Final invoice indicator for Service based IV

Hello,
For invoice verification based on Service entry, the system proposes the final invoice indicator checked. I'm trying to uncheck this indicator as in our case, vendors usually sends partial invoices.
We have FM implemented and applied Link: [note 583400 MIRO: EREKZ always proposed with services|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=583400] and it solved part of our issue, as leaving the commitment in the PO, but we need to find a way to unmark the indicator on MIRO so the GR - IV account is not cleared after a partial invoice.
I would appreciate if someone can tell me how to approach this scenario.
Thanks in advance,

Hello Bharat,
The indicator of the PO is set after this indicator on the invoice. It is actually a result of the IV unless you apply the note 583400.
What I need is that this indicator to be unchecked for Service items with service entry.
Regards,

Mass change final issue indicator in production order

Hi
Is there any report can show final issue indicator for all production order? How can I mass change the indicator?

Hi,
In reports such as COOIS and COHV you can select in the initial screen "List: Components" and check your "Change layouts" to view the report with the "Final Issue" indicator.
But you cannot do a mass change in this option. One way is : You can just select the particular order -> goto Component Overview of the order to be changed and do the necessary changes and save to get the required result.
-Thaila Shree

Unable to check / uncheck a checkbox in a JTable...

Hi all,
I know that a lot of people have asked this question before but I am unable to find a solution even after going all the messages. My issue is:
My initial rendering of the checkboxes inside the table works ok. I am using a TableCellRenderer and my input to determine the "checked/unchecked" is string like "true" or "false" and not boolean values. But I am unable to do check / uncheck any of the checkboxes.
I would really appreciate any pointers.
Thanks in advance.
Below is my code snippet:
public Component getTableCellRendererComponent(JTable table_,
Object value_, boolean isSelected_, boolean hasFocus_, int rowIndex_,
int colIndex_)
Component component = super.getTableCellRendererComponent(table_,
value_, isSelected_, hasFocus_, rowIndex_, colIndex_);
indicator = table_.getColumnModel().getColumnIndex("IND");
if (indicator == colIndex_)
     if (value_.equals("true")){
          component = new JCheckBox("", true);
     } else {
          component = new JCheckBox("", false);
     return component;
}

Your TableModel has to indicate that the column is editable. Your TableModel also has to implement setValueAt() so that when the user changes the value, it updates the data.
The table will know to use it's own boolean renderer/editor for that column because it knows what to do when a column returns a Boolean.

Final Issue Indicator on reservation

I am looking for the answer to how the Final Issue Indicator should function when it is checked doing a partial goods issue to a reservation.
I've found differing documentations.
1- Final Issue indicates that a reservation item is completed. Further goods movements in respect of this reservation item are not anticipated, although they are still possible.
2- If the Final Issue Indicator is set that it will no longer be suggested as a selectable item for issue.
My problem is that when the Final Issue Indicator is set while doing a partial goods issue, the item still shows up on MIGO as a selectable item when you are issuing remaining items. I did not think the item would still show up as selectable. (seems to be following #1)
When the Final Indicator is set before issuing anything on the item, then the item doesn't show up as selectable on MIGO. (Seems to be following #2)
Thanks for any help.

Hi
Final issue indicator behaviour in reservation.
1) Create reservation and in change mode set the FI indicator.
In this scenario system will not not allow you to use reservation saying that XXXX does not contain selectable item.
2) Create reservation and do the partial goods issue then set the FI indicator.
In this scenario system still allows to do the goods issue for the remaining item.As per standard SAP it is still possible to do the GI for the partial issed one even the FI is set. If you want to restrict then you can either set the deletion indicator or remove the movement allowed indicator.
Hope it helps at some extent.
Karthik

Final issue indicator for Reservation Item

Hi,
The issue is as follows:
The Componets for the Process order are issued through T. code COIK. Some componets are not appearing in COIK list . when the picking is done for the order, the final issue indicator is set in the process order where the componets are not picked and also the final issue indicator is not set where the componets are picked.
Can anybody tell me what could be the Reason/s for the above.
Regards,
Prasad

Dear,
FI indicator can be set manually via MB22 though the Reserved qty has not been withdrawn.
There is indicator in MB22 to tick for the final issue, this indicator is set automatically for a goods movement when the total reserved quantity has been withdrawn or delivered.
Final option is to clean only the reservation for a given material, just go to the ordern in change mode, and then to the material details, and set the flag "on" for the field "Final Issue".
Reservations are created when order gets released.
1. can clear these reservations at the time of the order confirmations by clicking on checkbox for clear open reservations.
2. You can also clear this reservations by using transaction code MB22 & deleting the reservations.
3. You can delete all reservations by deleting material documents or by cancelling process order confirmations.
4. Or by checking final issue in process order transaction COR2.
Hope this will resolve your querry.
Regards,
R.Brahmankar

Purchase order item of maintenance order still without final billing indic

In maintenance process, while closing the Maintenance order after MIRO and Payment, system is giving warning message as :
"Purchase order item 4520000023 00010 of order 4000020 still without final billing indic.
Message no. IW215
Diagnosis
An invoice receipt is still expected for order 4000020".
We tried with MM consultant but setting is not there for Billing indicator.
Any solution ?
Regards
Rewards if resolved...

Hi,
Goto respective purchage Order, Select Invoice tab in Item, put tick mark in check box of Final invoice. Then save the purchange order.
Preoceed further.
Regards

Purchase order - Final invoice indicator EKPO-EREKZ

Hi,
How is possible set Final invoice indicator in purchase order items - only manualy, or exists solution for automatical setting ?
Thank you for advice.
Bernard

Hi Bernard
The final invoice indicator has to be selected manually everytime you do MIRO.
Moreover, just to add on, the final invoice indicator will never stop you from posting further invoice and is used only as a information to the buyer. Make sure you check the PO history tab for finding the correct value of total invoice rather than seeing this check box
And
One more thing, incase you a line item in PO with 10 quantity, and you post 10 invoices for 1,1,.. quantity and you check final invoice in any one of them, the indicator is ticked in PO
For example, once you have final invoice in one invoice, the same is reflected in PO. but after this you post one more invoice without final invoice indicator, still PO will always have the final invoice indicator. You will have to manually remove in the PO if you want.
Regards
Vivek Singh

Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

Hi,
We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
Would be great if anyone could guide in this regard
Detailed Scenario:
1) Maintenance Order is created (IW31) is created in plant A
2) For non-stock items, reservation created by maintenance order creates a purchase requisition
3) Account Assigned STO (against maintenance order) is created from purchase requisition
4) Transfer Posting done from Plant B (351 movement) for complete qty
5) GR at Plant A done (101 movement) for complete qty.
6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
Thanks
Edited by: muthukumarv on Apr 2, 2010 8:59 PM
Edited by: muthukumarv on Apr 2, 2010 9:00 PM
Edited by: muthukumarv on Apr 2, 2010 9:03 PM

Hi,
Please check in the STO if the "Delivery completed" indicator is checked or not?
If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
Thanx.
Nilmoni.

Use spacebar to check/uncheck a checkbox in a datagrid.

I have a DataGrid that has checkbox in the first column. The user wants to be able to check/uncheck the checkbox when he selects a row, by mouse or up and down keys, and hits the spacebar. Currently the spacebar functions if the last thing that the use has clicked on is the Checkbox. If the user clicks in the cell where the checkbox in located(not the checkbox itself), the spacebar won't do anything.
<mx:TabNavigator>
     <mx:VBox>
          <ms:datagrid id="lgGrid" dataProvider="{this.lData}">
               <mx:columns>
                    <mx:Array>
                         <mx:DataGridColumn dataField="vis" id="dfID" sortable="false">
                              <mx:itemRenderer>
                                   <mx:Component>
                                        <mx:CheckBox click="data.vis = !data.vis" paddingLeft="4"/>
                                   </mx:Component>
                              </mx:itemRenderer>
                          </mx:DataGridColumn>
                          <mx:DataGridColumn dataField="name"/>
                    </mx:Array>
               </mx:columns>
          </ms:datagrid
   </mx:VBox>
</mx:TabNavigator>

Your TableModel has to indicate that the column is editable. Your TableModel also has to implement setValueAt() so that when the user changes the value, it updates the data.
The table will know to use it's own boolean renderer/editor for that column because it knows what to do when a column returns a Boolean.

Final issue indicator on the general data button on the work order

Hi Gurus,
can anybody please let me know why the final issue check box is checked automatically even before the goods are issued via migo against the work orders. This check box is on the general data tab of the material entered on the components tab of the work order. Please help. As a result of this, the store room clerk cannot issue the material againsth the work order, because this check mark is checked. I want to understand what is causing the check mark to be checked automaticallu even before tthe materials are issued out
Thanks
ANusa

Hello!
This might have occured due to completion confirmation of order before goods issue. Generally this happens if final issue indicator is set as default in completion confirmation tab. Please check and reply if problem is something else.
Regards,
Vaibhav Mishra
Edited by: Mishra_Vaibhav on Jan 27, 2011 5:23 AM

Spark check box on FlexEvent.CHANGE

Spark check box does not check/uncheck itself when the FlexEvent.CHANGE is fired on its own instance. Is it a bug in the flex frame work? but when the same is done on the mx;Checkbox it works properly.
i'm using flashbuilder 4.0 standalone with with 4.0.1 SDK in it.
eg:
checkbox.dispatchEvent(new Event(Event.CHANGE)); // this is for spark /mx - for mx the checkbox will
//uncheck/check when this event is fired
// for spark this event is not captured

I don't believe this should have had this behavior with the MX CheckBox. The change event should fire after the selected property is changed, but, dispatching it should not cause the selected property to change.
Can you describe why you would want the change event to update whether the CheckBox is selected or not?
Joan

Final Delivery indicator in PO

Hello,
I am not getting " final delivery indicator " icon in purchase order.
we are using ECC6.
Thanks in advance,
Vikas R.

Hi,
Active "Delivery completed" indicator for your plant in t.code: OMCD
For Service(external)
Check Field Selection Key for SERVICE PO Document type & make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Now assign Field Selection Key PT9F for SERVICE PO Document type & save.
Go for cycle service PO, SES & MIRO and can view Delivery completion indicator
For more check the SAP Note 735404
Regards,
Biju K

JMenu closes after checking/unchecking JCheckBoxMenuItems

I added a JMenu to an existing JPopupMenu, and added a few JCheckBoxMenuItems, followed by a JButton to the JMenu. Currently, when I open the JMenu and check/uncheck a JCheckBoxMenuItem, the JMenu closes.
So, my question is, how do I get the JPopupMenu, JMenu and all the JCheckBoxMenuItems to stay open while I click multiple JCheckBoxMenuItems? I basically want everything to stay open until I push the JButton. I believe this is possible, but I don't know how to go about it. And I need help ASAP. Thanks!

Hi, yes actually it is urgent. I'm doing this for work and it took me two days becuz it was the weekend and I didn't have access to code.
Anyways, I just created this SSCCE, as you had advised. As far as instructions are concerned, after launching the application, you need to right click on the JFrame and go from there. You will see that after selecting/unselecting one of the JCheckBoxMenuItems it goes behind the frame. I'm sorry if my instructions are confusing, all you need to do is right-click on the frame and you'll see what I'm talking about.
import java.awt.Point;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JButton;
import javax.swing.JCheckBoxMenuItem;
import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JPopupMenu;
import javax.swing.SwingUtilities;
public class MyPopupTest {
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          final JFrame frame = new JFrame("My Frame");
          frame.setSize(500,500);
          final JPopupMenu mainPopup = new JPopupMenu();
          final JMenu myMenu = new JMenu("My Menu");
          final JPopupMenu itemsPopupMenu = new JPopupMenu();
          JButton okButton = new JButton("OK");
          JCheckBoxMenuItem item1 = new JCheckBoxMenuItem("item1", true);
          JCheckBoxMenuItem item2 = new JCheckBoxMenuItem("item2", false);
          JCheckBoxMenuItem item3 = new JCheckBoxMenuItem("item3", false);
          frame.getContentPane().add(mainPopup);
          mainPopup.add(myMenu);
          myMenu.add(itemsPopupMenu);
          itemsPopupMenu.add(item1);
          itemsPopupMenu.add(item2);
          itemsPopupMenu.add(item3);
          itemsPopupMenu.add(okButton);
          okButton.addMouseListener(new MouseAdapter()
               public void mousePressed(MouseEvent e)
                    itemsPopupMenu.setVisible(false);
                    myMenu.setVisible(false);
          myMenu.addMouseListener(new MouseAdapter()
               public void mouseClicked(MouseEvent e)
                    if(SwingUtilities.isRightMouseButton(e))
                         mainPopup.setLocation(e.getPoint());
                         mainPopup.setVisible(true);
               public void mouseEntered(MouseEvent e)
                    itemsPopupMenu.setLocation(new Point(myMenu.getLocationOnScreen().x + mainPopup.getWidth(),myMenu.getLocationOnScreen().y));
                    itemsPopupMenu.setVisible(true);
          frame.setVisible(true);
}

Final delivery indicator

Hello
My question is
"Explain the circumstances in which the Final delivery indicator is automatically set when posting a goods receipt"
Thanks

Hi Sunil
Check help given by SAP
Set "Delivery Completed" Indicator
         the delivery completed indicator for goods receipts if the delivered quantity lies within the under/overdelivery tolerance.
     The "delivery completed" indicator has the following effects:
     o   The item is regarded as closed, even if the total quantity was not delivered.
     o   A further delivery is not expected, may, however, arrive.
     o   In the next goods receipt, the item appears on the selection list but has no selection indicator.
     o   The item can be reorganized even if the total quantity has not been delivered.
     Note
     Even if the "delivery completed" indicator has not been set, an item is'nsidered closed once the total quantity has been delivered. This mean that the "delivery completed" indicator is not necessary in this case.
    Vishal...

Final IV Indicator Check/Uncheck in PO Change results in PO Print

Similar Messages

Maybe you are looking for