FM for changing address in functional location

Hi all
I wanted to change address in functional locations in my report, but I don't know any function modul for this. I've found BAPI_FUNCLOC_CHANGE, but it's not possible to change address data with it. Normaly it's done through IL02 transaction. I would be grateful for any help.
BR

Pete Atkin,
If you go to transaction IL02 and on tab Location you push pencil button, than on new window you can change some of address data but not all that are storred in ADRC table. For example you can change street name or city name, but there is no place that you could enter city code or street code. So if this is not possible to enter these values in this transaction it is not possible to run this transaction from report with BCD data so that street code and city code were changed in ADRC table.

Similar Messages

PM-Change label of functional location

Hi
Can we change label of functional location?
Rgds
Pooja

Hi,
check this link http://help.sap.com/saphelp_46c/helpdata/en/41/c11662ee8411d29a640000e8a529f3/content.htm

Change structure for list editing of functional location

What is the significance of change structure for list editing (t code il04) of functional location?

just enter the functional locations you need to create and descriptions and save

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

ESS Workflow 10000015 Approve request for changing address thru Portal ESS

Hi Experts,
We want to implement ESS workflow 01000015 u201Cchange (infotype 0006) Address will be blocking until approved/rejected by Administratoru201D. The workflow is trigger OK from R3, user creates a new address and IT0006 is blocking till administrator approve or reject.
What we want now is to trigger this workflow from Portal, but here is the problem:
1.- I do not see any option (button) for creating a new address from Portal iView, what else is missing??? I believe creating new address from Portal could trigger this workflow, but I am not sureu2026
2.- If the first option does not work I would like to trigger this workflow by the event u201CChangeu201D, so I need to edit the address. From R3 is blocking IT0006 OK, but from portal is not blocking the address at allu2026 What else is missing??? I do not know if this could be an issue from R3 or Portalu2026.
We already check u201CNote 495971 - Workflow 01000015 is not triggered when changing addressu201D and workflow is working ok only from R3.
Regardsu2026..
David Cortes

Hi Swamy,
I am a little confused of you requirement. The scenario here is that Person A (Any person using ESS) must not change any of his/her own personal data until Person B Approve/Reject the new Data. For example: if a user A want to change his/her address, personal data etc. must be approve or reject for another person B. This is a validation that most of the companies want to have in order to validate this information. Employees may change their personal data, but how HR area validates if this new information is real or not... One way to verify this new information is a validation for a Person B who will be to approve or reject this information. Now if you do not have this scenario I believe you will not have to do this implementation class because ESS do not have this scenario. The standard ESS functionality is available for change any data without validation and this should be working right now on your Enterprise Portal.
If you want to have a validation for a third User, Person B, you may check these points:
1. Edit 2. New Permanent address
Edit - Will change the record irrespective of dates. This will modify the current record which is valid as of today.
New Permanent address - This will create a new record effective today and previous record will be delimited.
If I use lock functionality in Edit scenario, then in the portal it will dispaly previous record which is not the correct data.
For 2nd case, this will insert the new record, so Lock may work in this case. I will check this.
I believe you will work most of the time with "Edit" button. If Person A edit address, the new register will be created and locked in PA30 Infotype 6 until person B Approve/Reject. How Person B knows if someone has edit his/her address?? You may achieve this using Universal Work List and notification. You may have to create a task for person B with email notification, so person B will be enter into Portal and check his/her new task from the UWL. This task will be ITS UI front end and from here person B decide if approve or reject. If Person B approve, the new register will be unlocked and replace the last one (Also in Portal). If person B reject, the register blocked will be gone and the last one remains.
This should work for any infotype . Check only the type of event generated for any of them in order to trigger the workflow.
Do you have any idea how to achieve this for Personal details where the Lock/Unlock functionality is not available.
Standard ESS works without any lock/unlock functionality. remove the current workflow if you have used any.
Regards
David Corté

'Carry-out Mass changes in Equipment/Functional Locations

Dear Experts,
Through one SCN thread, I came to know that there is a functionality namely 'Carry-out Mass changes' in the GOTO menu in the List editing ALV screens of Equipment/Functional Locations (IE05, IH08, IH06 etc)
But, I am not able to find any such (Carry out mass changes) function in any of the menu items in IE05, IH08, IH06 etc.
Can someone help clear this situation.
Regards
Jogeswara Rao

Hi
Can you check whether the following business function set were actviated
Business Function LOG_EAM_CI_1
Business function LOG_EAM_CI_2
Regards
thyagarajan

Contact changes address to wrong location every time

ok so input the address "655 W. Irving Park Rd. Chicago, IL" to maps.
the location is accurate.click the arrow and add to existing contact
add it to a contact the the contact is opened
I click on the address to show it on the maps
the same address is now displayed far southwest in the middle of a forest preserve!
Try it at home kids!
no idea how to fix this or who to tell.

Complain to Google... it's their mapping service. I'd hope this would be fixed with iOS6 once Google Maps gets dumped.

Avoid Email address check while creating or changes functional location PM

Hi Experts,
We have upgraded 4.6C system to ECC 6.0 with EHP4.
We are tring to change the existing functional location created in 4.6c through tcode IL02 -> location tab -> Email address.
and tring to maintain value as 'CAP 20/20/97' in email address field but it pop-ups with the error message as
'Email address 'CAP 20/20/97' is invalid'.
We know this is a SAP standard check but as part of the AS IS functionality, end user is able to maintain the same value in 4.6c and expecting same in ECC 6.0.
NOte : End user is using this field SMTP_ADDR (Email address) for multiple purposes.
When we reached SAP, following is the SAP responce.
This validity check is in compliance with RFC 2822.
This behaviour is standard since note 799902. If you would like to see
this functionality changed then please proceed as outlined in the
attached note 11.
Can any one provide work around solution to avoid the Email address validity check ?
Regards,
Suresh Goud.

Hi Pete,
I just want to find out the reason for occuring this issue in ECC 6.0. Is because of any incomplete validation / missing configuration / implementation of any other SAP Note ? PFA the SAP note details for your easy reference.
SAP Note No. 1546997
Number 1546997
Version 1
Processor
Processing Status New
Implement. Status Cannot be implemented
Language EN
Short Text Correction of translation of '<Email address & invalid>'
Component XX-TRANSL-NL
Long Text
Symptom
Wrong translation /
Reason and Prerequisites
Solution
Translation of objects using transaction SE63 (see further below)
Transport Object(s):
PgID Object Name
LIMU MESS XS138
Package: SCON
Software Component: SAP_BASIS
Application Component: BC-SRV-COM
Translation Guideline:
English Text: Email address
Other terms
SE63, SE91
Valid Releases
SAP Basis component
SAP Note No. 1546997 11/11/2013 Page 2
46C
620
640
700
710
711
701
702
720
730
Links to Support Packages
Software Component Release Package Name
Thanks & Regards,
Lakshmi S

PM: Transaction IE02 functional location change creates new EQUZ?

Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date). There is a scenario where we do NOT want this to happen. In other words, we have an equipment, say EQ123. We want this equipment to have one history record per a cycle that might include several changes in the functional location. When the cycle is complete, then we can create a new history (EQUZ) record. That cycle might be warehouse departure to warehouse return.
Is this possible. If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
Thanks in advance,
Glen.

Glen,
I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
thanks
Bala

Table for maintenance plant for equipment & functional location

Hi,
I am trying to identify a table that will give me maintenance plant for a particular equipment & functional location.
Can you help me identify this.
Regards,
Vijay

Hi
ITOB is Table for Functional Location which will give Maintenance Plant & for Equipment which will give Maintenance Plant
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Jul 29, 2010 4:32 PM

Log action - Functional Locations (PM)

hi everybody,
I want to view the action log and the changes of a functional location or an equipment in SAP PM, but when i go to Extras - Action Log or Extras - Display Changes, appears the message:
No change document positions found
Message no. CD649
Diagnosis
No change document item was found which satisfies the selection conditions.
Procedure
Pleas check the specified selection conditions.
Maybe i have to activate something.
Please help!

Hi anali.cm
Please note that the following are not recorded as part of change documents for equipments:
Status changes
EQBS data changes
You can view status changes if instead you use the status history or
the application log.
If the changes you make to the equipment are to the status or to a field in the table EQBS then this could be the reason
why you get the 'No change document positions found' CD649 message.
Theirs no customizing that i know of to influence this ...
Thanks -
Enda.

Error while updating the classification in functional location

HI
I'm adding the classification to the fuctional location, When i save the functional location it is poping me this information.
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
When i run this program RCCLUKA2 tried to run as per the information provided in the Help.
When i execute this program for class type 003-Functional location i dont get any results.
still the problem persisit, If any one has come across this problem please let me know to solve this issue.
Thanks
Abdul Mujeeb

Hi Pete
The message appears like this
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
Message no. YMD01 000
Thanks & regards,
Mujeeb

Creation of Work ceter based on Functional Location.

Hi all, Greetings.
I have a query regarding creation of work center in PM. i m new to this module and this is my first implementation.
The scenario is as follows.
Here there is one Plant and which i will be considering as maintenance plant as well as maintenance planning plant. i m planning to classify the technical objects based on both Functional location as well as Equipments. there are 8 functional locations and almost 10 to 20 equipments under each functional location. Can i create work center based on functional location if so i will have to create 8 work center or can i create 3 or 4 and consider 1 work center for 2 or 3 functional locations.
please help me on the same and correct me if i am wrong. i have no much knowledge on the same.
Thanks in Advance.

Hi,
Thanks Seenu,
So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
Thanks in advance
Ramya

Equipment Hirarchy with functional location

Hi, I am trying for Equipment Hirarchy in functional location. I have one main equipment and 4 sub equipment of same type. I want to give specific description each sub equipment.Everytime when I dismantle and install this sub equipment, I want the description and position remains unchanged. How can it be done.

I will be dismantling the defective equipment and installing new equipment. I will the assign same position number to the new equipment. Here I want to give a name to the position number. example "Cylinder Position 1". So whenever I dismantle and new equipment to that position, I should get the position description automatically.

Listing of Functional Locations in a Heirarchical Order in PM module

Hi Gurus ,
                 I am working on a requirement to display the Functional Locations in a heirarchical order for a given input Functional Location from table IFLOT. This is to be done by selecting all functional locations with the same String Indicator and the next lower heirarchy level for a given functional location.
    The above procedure is to be done upto 2 levels.
For eg .
Input given: AA (Functional location with heirarchy XX-NN-XX)
Then , my report should display
Level 2      Level 3
AA-22       AA-22-BB
Kindly provide me some useful tips .
Regards,
Venkatesh.

Hi,
When you are fetching the data from IFLOT
first table TNAPR field.
For each TNAPR you have to check Superior FL(TPLMA) field repeatedly till all the below levels have been fetched.
So the IFLOT select should be in a loop pass.
After fetching all the Levels of Values for FL, then you can put them in a string by concatenating as per your requirement and display.
Regards,
Anji

FM for changing address in functional location

Similar Messages

Maybe you are looking for