FOB price changes while copying GRN to Landed cost

Hi All
I have a problem that "Fob price changes while copying GRN to landed cost. There is no discount at GRN"
please suggest if any one with a better understanding
thnx n regards
Abbas

Hi,
If you choose to handle Freight in rows and choose 'Freight 1 Stock' field as YES, then the FOB price will be updated with the freight amount already.
Nat

Similar Messages

  • Sales order Price change while releasing the credit block using VKM3

    Hi,
    Please advice me on the following issue I am facing:
    I am creating a sales order, which is having automatic pricing. The price is getting picked up using the condition records correctly in the order. The pricing condition can be manually changed in the order (setting according to the condition type).
    So I am changing the price manually in the sales order (system determined price $230 and I changed it to $270) and saved the order. Cross checked the order while saving to make sure the price of the order is now $270.
    As the customer credit limit is exhausted, the system blocked the sales order (credit block). I released the sales order using VKM3, but when I checked the sales order, the system reset the price back to $230 (condition record value).
    Is this a standard SAP behavior?
    My requirement is: the system should not change the value back to the original condition value while releasing the sales order using VKM3.
    Please guide..
    Regards,
    Prasanth

    In the condition type definition T Code V/06, fin your manual condition type definition- for the field "Manual Entries" - Have option C "Manual entry has priority".
    In the pricing procedure, T Code V/08 in the initial screen - for your pricing procedure - under the column "pricing Type" have Option C - copy manual pricing elements and redetermine others.
    Try with these settings. Hope this helps
    Regards
    Sai

  • Price Change while creating a shopping cart

    Dear Srm Guru's
    We are in SRM 4.0 and following a classic scenarios.
    While creating a shopping cart  the price in the shopping cart is picked up from the price which we upload through EBP_GET_BACKEND_PRICES
    If there is a variation in the price can we change the price while creating the shopping cart. Currently the field is in display mode what settings should we make that it allows a change of price while creation of shopping cart.
    Regards,
    Nimish Sheth

    Nimish,
    for this you have to change the standard code.
    In screen communication structures, there is a flag "price_changeable" that controls the edit mode of price field.
    You have to change the standard logic to implement your behaviour in FORM price_changable_set from include LBBP_SC_APPF92:
      IF es_item-mode EQ gc_display OR
        ( es_item-rfq_ind EQ gc_yes AND es_item-price IS INITIAL ).
        CLEAR: es_item-price_changeable.
      ELSE.
        IF NOT es_item-catalogid IS INITIAL OR
           es_item-price_origin EQ c_price_origin_f OR
           iv_scenario EQ c_sc_generic_soco OR
           iv_scenario EQ c_sc_generic_history OR
           iv_scenario EQ c_sc_generic_workload OR
           ( es_item-price NE es_item-gross_price AND
             NOT es_item-price IS INITIAL ).
          CLEAR: es_item-price_changeable.
        ELSE.
          es_item-price_changeable = gc_yes.
        ENDIF.
      ENDIF.
    Rgds
    Christophe

  • Tax Code gets changed while copying from A/r Invoice to Credit memo

    Hello,
    When i am copying my A/R Invoice to A/R credit memo, at that time the tax code i have specified in the invoice gets changed to some other code in credit memo.
    Please suggest me what to do.
    Regards.
    ShriX.

    Hi!
    Really looking strange, unable to predict. Also, check wheather yo have defined anything in
    TaxCode Determination in Adminstration > Setup > Finance > TaxCode Determination.
    If so, delete those and check.
    Raise a support message to SAP.

  • Landed Cost - Weight/Volume information at Row Details on [Items] tab

    Hi, Experts,
    While copying GRs into landed cost, if [Costs] tab, we have weight or volume setup on "Allocation by" , then the Row Details on [items] tab need to be filled, otherwise, will have error msg.
    Is there any way, the information can install from Item Master Data automatically with those information has entered?
    Thanks.
    Emi

    Hi Emily,
    You may try Formatted Search to bring those value from Item Master if you have all info needed.
    Thanks,
    Gordon

  • Reversing Landed Cost document with more than one vendor

    Hi Experts,
    Reversing Landed Cost document with more than one vendor:
    My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
    Created Landed cost by selecting 2 vendors in the Vendor field.
    After you picked one vendor, you go to the vendor code/name again then choose another vendor you
    need, once you picked, the system will ask you whether you want to delete the previous data, then
    you say no, after then you will see the vendor name became "different vendors" and code be "********"
    (on the vendor tab: you will see two vendors)
    To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
    I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
    zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
    the vendors for Good Receipts & Landed Cost.
    Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
    To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
    can with one vendor to reverse the transaction.
    Can this functionality be added to future versions?

    Take a look at business area and groupings in they payment program settings...
    I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    Grouping Open Items and Individual Payments
    Wherever possible, the payment program will always group items together for payment.
    The payment program can only group together open items for payment if the open items in an account have the same:
    1. Currency
    2. Payment method in the item
    3. Bank in the item
    4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
    You can also pay open items from different company codes together, as well as customer and vendor line items.
    Items in an account are not grouped together if you:
    1. Make payments separately per business area. This procedure entails separate payments being created per business area.
    2. Want to make individual payments
    Items in which a payment method is specified are not grouped with items in which no payment method is specified.
    You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
    In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

  • Landed cost on import items

    Hi
    Our cient adds 2 cost in the Raw material cost ( Customs duty and Clearing agent cost)
    To manage this I have to added the following cost to my item price for which i am using landed cost functionality.
    GRPO: Raw Material Cost ( Qty x Price) = 400 x 100 = 40000
    Customs Duty ;                                        = 10000
    Clearance agent cost                              = 5000
    The total (10000+5000) is added to item cost through landed cost and my unit price is increased as per requirement.
    My concern is 5000 is gone into Clearance agent account created as an landed cost account.
    Later AP service is raised for agent which hits my vendor and clearing & forrwarding account.
    How to clear the value 5000 in clearance agent cost account.
    Guide me if i am following wrong steps for landed cost. Solution will be appreciated

    Hi Prince......
    This 5000 which was credited during Landed cost you have to debit this during AP service invoice as you mentioned in your thread where clearance agent cost account will be debited and your vendor account will be credited.
    This way clearance agent cost account credit at Landed Cost level and clearance agent cost account debited at AP Service Invoice Level will make this account settled.....
    Hope this is the right solution for you.......
    Regards,
    Rahul

  • Do we have option not to refresh the data in AP invoice while copying from GRN and change the date of the invoice in SAP 9 PL 0

    Hi
    I have update tax details in GRPO but while copy to AP invoice system pick posting date/ document date as system date and if i change the date the screen refresh and the tax details i have updated it change. that i do not want.
    Is there any option so that GRPO date will copy in ap invoice so that i need not to refresh the screen
    regards
    Ashish Garg 

    Hi,
    Please provide an example for tax details. Make note on these,
    1. Whenever copy GRPO to AP invoice, posting and document date is system date. This is default design system
    2. If you change these dates in AP invoice, your payment to vendor leads to confusion.
    For example:
    You have received items on 25-03-2014. But vendor raised invoice on 03/04/2014.
    Thanks & Regards,
    Nagarajan

  • Can anyone help me?Time Machine couldn't complete the backup to...  An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk.  What is the problem?  I've made no changes.

    I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files.  The problem may be temporary.  If the problem persists, use Disk Utility to repair your backup disk.  I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently.  I've made no major changes.  I've ran a diagnosis on my back up drive with no problems.  The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message.  I can see the shared drive in Finder.  The light on the drive blinks while it starts the back up.  I can see the shared folders on the networked drive.  The backup process starts but for some reason it just stops.  Can anyone help?

    You can't repair a network volume in Disk Utility.
    Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
    If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

  • Office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change

    office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change
    mac yosemite
    office365

    Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
    23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
    23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
    23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

  • HT4098 Can the price of a subscription change while auto-renewal is on?

    I just started an annual subscription for $.99 but the normal price is $11.99. Will the subscription renewal price change once the sale period is over?

    Yes. The sale price is not locked in for the duration of your active sub.

  • Price change in order and invoice

    Hai Experts.
    The current sales prices shall be included in the SD document while creating sales quotations and TA orders.
    The same shall be communicated to the customer (quotation resp. order confirmation) and accepted by customer.
    Since the item categories are set in such a way that a new pricing is generated. The prices which are valid at the time of billing shall be calculated.
    The preferred item categories of the delivery transaction shall be set as pricing type. C = take the manual price component which is incidentally newly established
    The price variance shall be calculated as a credit note, which eventually is considered as additional expenditure.
    The different prices in the order confirmation and commercial invoice can not be controlled by the processor of the order with the help of feasible expenditure.
    while creating order (TA,SO) there should be an option in Additional data B ask for Yes or No.
    Yes means the prices changes are allowed.
    No means the prices changes should not allow.
    How can i do this. what is the process for stoping price changes from order to invoice.
    please suggest me
    thank you very much.
    Varma

    Hello
    for stopping price changes from order to invoice.
    In your billing related copying control (Tcode VTFA- Order related billing & Tcode VTFL -Delv related Billing), in item maintain Pricing type as D - Copy pricing elements unchanged
    If in any case you want to change the price after applying above config change, then simply click Update buttomn in condition tab of Item data and as your requirement choose either of the following:
    - B - Carry out new pricing for total new pricing
    - C - Copy manual pricing elements and redetermine the others for copying manual condition type & chaging other
    - G - Copy pricing elements unchanged and redetermine taxes for tax condition type changes
    Thanks & Regards
    JP

  • Price change after invoice receipt

    Hi All,
    I am pretty new to SD and was wondering how this scenario would best be handled.
    Customer has ordered and received. He receives invoice and realizes his price was incorrect (in this case, to high).  We decide to extend the concession to the customer and resubmit the invoice with the corrected price. What is the best way to handle that in SAP?
    Thanks in advance!

    Hi
    If the price is incorrect then you have to go for INVOICE CORRECTION REQUESTS doc type.
    Invoice correction requests doc type is  RK.
    this doc type is used to raise the credit memo if  the price is wrongly charged to the customer or if the quantity received by the customer is less when compared to the invoice quantity
    to nullify this we use invoice correction request to raise the credit  memo.
    Ex1 :  price wrongly charged
    billed quantity - 10
    actual price billed - 100
    new price -95
    so the price variation is Rs.5/- . so to nullify this we use doc type RK  where in we enter the new price and at the invoice we get the credit memo for the difference amount
    Ex2 :   Quantity wrongly billed
    acutal quantity billied in invoice - 10pcs
    customer received quantity - 8pcs
    so here also there is a variation of 2pcs for this 2 pcs we enter and we raise the credit memo.
    when you create a order with doc type RK with reference to invoice no .you get  2 item categories G2N & L2N. go to L2N line item and if it is price change  the pirce and if it is quantity change the quantity.and when you raise the invoice you get the credit memo for the difference price or qauntity.
    SAP has delivered RK doc type mainly with the intention to create these differences only , but there could be scenarios where you have to raise debit memos also .for  that you dont have doc type .so copy RK doc type to ZRK. and change in the copy controls also. and in the item category L2N . you have the sales doc type as K which is cerdit memo . now when you create a for debit memo. change it to L and put MRP type as D. even for standard also plz check while creating these settings in the item category L2N
    Regards
    Srinath
    Edited by: sri nath on Mar 21, 2008 5:25 AM

  • Error while copying a process chain.

    Hi All,
    I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
    Please confirm.
    Regards,
    Shailja.

    Hi Shailja,
    That means that you can not change that type of object on Quality or Productive server.
    Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
    Beware that you must change the status not with a double click but with a right click
    also refer the following thread you can find your solution
    Error message after process chain transport
    Hope this helps
    Regards
    Karthik
    <3rd Reminder for points removed>
    Message was edited by:
    Moderator

  • Error while copying a movement type

    Hi all,
    I want to create an movement type alternate to 501which will only update the qty not the value.
    1. For  this I have copied movement type 501 through t code OMJJ.
    2. While copying I changed the target movement type as "Y01".
    3. Selected the option of "Copy all dependent entries"
    Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
    such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
    Similarly with field "Account grouping", system not allowing me to delete any entries.
    Please suggest.
    BKR

    Hi,
    You just need to delete two items from the customizing view, go to next step, that will be okay!
    Regards
    Tao

Maybe you are looking for