FTP Adaptert - Junk Filename is created in archive folder

Hi All,
Junk filename is getting created in archive directory.
I have one ftp adapter,after the file is getting processed the file's are getting moved to archive directory.
But with some different Junk file name suffiffed with timestamp/ filename are randomly generated. But the content of the file remains the same.
Pls suggest me as to how to retain the same file name while archiving.
Thanks & Regards
Nithya

Are you on 10.1.3.3, there is a bug 6414848 which encrypts the file name. There is a stand alone patch of the same name (6414848)
It is also part of 10.1.3.4, or any MLR patch greater than MLR#6 for 10.1.3.3
Depending on your project I would recommend upgrading to 10.1.3.4 and apply the latest MLR patch MLR#6 (8279781) if you apply the MLR patch make sure you apply the one off patch 8416391 as well as there is a know issue around memory.
If this is not possible I would apply the latest 10.1.3.3 MLR patch MLR#17 (7375080) if you apply the MLR patch make sure you apply the one off patch 8416391 as well as there is a know issue around memory.
If this in not possible then just apply the one off patch 6414848
cheers
James

Similar Messages

  • Weird filename are getting created in archive directory.

    Hi All,
    Weird filename are getting created in archive directory.
    I have one ftp adapter,after the file getting processed the file's are getting moved to archive directory.
    But with some different file name/ filename are randomly generated. But the content of the file remains the same.
    Pls suggest.
    Thanks.

    This is standard functionality, it uses the original filename with a suffix of the datetime.
    cheers
    James

  • FTP sender channel filename issue

    Hi ,
    I have created a sender FTP channel with Filename Smart_*.csv.
    But channel is not picking files from FTP server, even not working for *.csv.
    Although when I have mentioned the complete filename in channel, its picking the file from server.
    Please guide.
    Thanks & Regards,
    Nida

    Hello,
    >>Only * is also not working
    Strange...I was searching SDN and found these two links describing the same issue which u are facing now...You can try to implement Mugdha's reply and see if it works?
    File adapter  (file name)  Wild Card * not  working
    In addition to that, check solution 36 in 821267...
    FTP & Wildcards (File adapter issue) - asterisk not working
    Thanks
    Amit Srivastava

  • How do I create an archive system for a blog created with a custom app?

    I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
    Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
    I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

    You can use classifications but there is no auto feature to archive like that on web apps.
    In terms of the blog, Like I have said to everyone that has posted about blog preview images:
    http://www.prettypollution.com.au/business-catalyst-blog
    Just one example of an image at the start of the blog post rendering out, not hard at all.

  • How do I create an Archive Mailbox for a pop3 account on an iPhone4?

    How do  create an Archive Mailbox for a pop3 email account on an iPhone4 running iOs6?

    You can use classifications but there is no auto feature to archive like that on web apps.
    In terms of the blog, Like I have said to everyone that has posted about blog preview images:
    http://www.prettypollution.com.au/business-catalyst-blog
    Just one example of an image at the start of the blog post rendering out, not hard at all.

  • Problem with FTP Adapter in creating a new Folder

    Hi all,
    I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
    CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
    passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
    adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
    But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
    file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
    be a problem with FTP adapter....can some one help.
    Iam using SOA 10.1.3.4
    Regards,
    Edited by: 0racler on Mar 9, 2010 4:46 AM
    Edited by: 0racler on Mar 9, 2010 5:49 AM

    any thoughts????

  • E4200 v1- problem creating a shared folder for the FTP server.

    Hi, 
    I'm trying to share an external USB harddrive (4TB- HFS+) that is attached to my e4200 router.  I'm trying to set up the FTP server, but when I try to create a shared folder, I get kicked out of the browser based interface for the router just as I'm trying to save the new shared drive.  I have tried many different things to get it to work: different computers (PC and Mac) different browsers, reflashing the firmware (which is version 1.0.06, build 3), I tried all of this with an NTFS formatted drive as well-  everytime I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure.
    I can see my drive on the local network, and I know the FTP server is working, because I can log into it from the outside- but I don't see anything shared, when I do.
    I have successfully gotten the media server to work using the same drive- but I can't create shared folder there either...  It seems to have shared the entire disk automatically when I first connected the drive to the router.
    Anybody have anything else for me to try?  
    Help!

    Same problem. Has anyone found a solution? I contacted tech support and got nonsense responses. I was of course asked to Factory Reset even though I told them I had done it before I called - classic brush off. Basicly here is the problem. 
    1. I cannot create a share on a USB connected HDD - this worked on the older Firmware. Now every time I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure. I am not the only person with the problem. Crazy thing is I had a share created and it worked after the upgrade. I wanted to add an additional share and now it wont share anything. HDD plugged into my PC works great. I was asked to try a different PC - even though I told them I tried from IE, Chrome, Firefox on a Windows 7, Vista, windows XP, IPad, Kindle and Samsung phone.
    2. While troubleshooting with the agent I discovered that although I have remote access disabled in the Administration>Management page but I can still access the router remotely. This is a huge security issue.
    3. Linksys is no longer a Cisco Company - if the code is this bad Belkin should take the Cisco logo out of the GUI. Don’t blame Cisco for your poor SW.
    I am ready to buy a new router and avoid Linksys and Belkin all together in light of these issues.
    Additionally, I would simply downgrade but the older Firmware is not available. When I asked for it I was told I could not get it. 

  • Workbench is too slow and creating an archive in Workbench takes an eternity

    Creating an archive in Workbench is taking too long.
    Creating an archive for 1 four page document is taking 15 minutes and 15 seconds to prepare then another 9 minutes to create the 150K archive file.
    We are experiencing this constantly and we need to figure out why. Are there configuration settings that can be made to correct this situation. We are running workbench in Citrix. Are there known issues about running workbench in Citrix.

    How big is your 4-page document source file?
    I had an issue recently where one of my .process files grew to 34MB. There was a bug where it just kept inserting blank lines into one of the xml tags every time I saved it. But because it was constant, it compressed down in the archive quite well.
    Rename the .LCA file to .ZIP, open it and see how big the files are in there. If there is one huge file, you might want to try copying the offending file to a new file in Workbench, delete the old one and see if that reduces the size.

  • Apple deciding what is junk mail and creating folders on my Mac

    I am becoming far less enthused with Apple.  For Apple to be filtering my email, to decided what is OK for me read and what is not, Apple must read my email and decide for me like a Big Brother, reasoning "it's for my own good". 
    Further Apple has demonstrated that not only can they direct where in my computer information is placed Apple can also create folders remotely in my MacIntosh computer as if Apple owned my computer, not me.
    My computer belongs to me, not Apple.  I decide what is SPAM and what is not.  I decide where information in placed not Apple.  I decide if a folder is created not Apple.
    With iCloud based email service Apple is not just coordinating  your email, Apple is deciding for you what is appropriate for you and where information is to be stored.  Its a small thing ownership, but its an important thing.  Good people died so we can have ownership.

    jimoase wrote:
    Csound1 wrote:
    jimoase wrote:
    Let's assume for a second that no one has a complaint: would there be a problem to solve?
    Reasoning that because someone else does something that makes everyone else doing it OK, seems a little weak in the unalienable rights department.
    I agree that if you like someone deciding for you what is good for you and what is not appropriate, that is your right to make that decision for you.  Neither you or Apple can assume that right for others without their consent.  Until the first part of April this year Apple did not make that decision for you.
    Has Apple asked you for your permission to read your email and decide/censor what you information you can store in your InBox and what you can not?
    More nonsense, Apple do not read your email, or add folders to your Mac, you are living a fantasy.
    And please note, you do NOT own OS X (which is what you are actually talking about) you have been granted a license to use it under Apples terms, if you don't like that the answer is clear.
    Here is an experiment to try. In Preferences: turn off Junk Mail.   Delete the Junk mailbox with in Mail.  In a few minutes, depending on your email traffic, Apple will recreate the Junk mailbox and place email in the newly create Junk mailbox.
    Who read the email to determine its junk?
    Who created the new Junk mailbox?
    If it wasn't you, it's either Apple or ghosts.  You decide.
    I have no intention of allowing your nonsense to affect me.
    Do it yourself.

  • How to create news archive? thank you

    How to create news archive with filter by years and months? (example: Makati Portal - News).... thank you

    Hi Amit,
    Create ur  folder in the portalContent.
    Right click on that folder u will get the option <b>new</b> ,select that u will see the option like new iView select this ,u will see all the iViews and select one of then it will ask u give the name of the iView and id for the same and click on finish.
    open the workset u have created and right click on the iView which u have created now u will see the option like <b>add to the workset</b> the select this the iView will be added to the workset.
    add this workset to the role
    add this role to the user/group.
    Check out this link for further information
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm.
    Regards
    Ajay
    Plz reward points if u feel this as useful

  • Creating an archive

    I want to create an archive of my master images. I am working off of a managed master library, where that library is kept on an external drive. I have created a vault of my master library, so I am backed up there. I would like my master images archived outside of Aperture though, and I would like to be able to use that as an alternate backup. I do not want to export my images, because I do not want to compress the images any further by exporting as JPEG's. I know that I could export as TIFF's, but I really don't want to take up that much room on my hard drive.
    As a second strategy, could I relocate my master images to create a referenced library and then just copy those images to another disk? I am assuming that by relocating the images, I am not exporting them, so the typical export presets won't have an effect and I will not be compressing the images, but simply relocating the masters. I could then either choose the keep the referenced library, or consolidate those images back into the Aperture library to get back to a managed master library.
    For anyone reading this post with knowledge of what I am talking about, does this make any sense and sound like a viable strategy? I plan to backup all of my images upon import as well as keep the masters in my managed library going forward, so I will not run into the issue of ever having to export in order to keep a true archive of untouched masters.
    Thanks for reading and responding.
    Mac

    I don't want to convert to a Referenced Masters library for good, just until I can make a copy of my images for archival purposes. Once that is done, I would convert it back to a Managed Masters library. Once that is done, I would use the Backup on import feature, so that I could simultaneously back up the files while importing them into my Managed library.
    I would of course export the Master images, and not the versions to create the archive, but even exporting the Masters requires that you export them at a certain setting. Aside from TIff, or one of the other file types that doesn't add compression, I am left with JPEG, original size and choosing a DPI setting (perhaps 240 to 300). Any way that I cut it, the images will be exported as JPEG's and it is my understanding that this will cause further compression. Besides, I have a lot of RAW images, and I do not want to export those for archival purposes as JPEG's. I would like to keep the RAW version intact for my archive should I ever want/need to import them again in the future.
    Am I missing something here with the export feature that you guys are talking about? Even if I export the Masters, they will still export as JPEG's (even if I choose original size...). Again, I'm looking for the file, as if it were first coming off of my camera.
    Mac

  • Creating photo archive/catalog

    Using iPhoto 08 on a grant-funded Mac Book Pro to create an archive/catalog of historic photos for a garden conservancy. Probable outputs: to Power Point for presentations and website for display.
    1) How to export "Description" data from iPhoto along with the image, title, and keywords?
    2) Is there more appropriate Mac-compatible software than iPhoto to create archive/catalog records of photos and export the data and images?

    Both iPhoto and Aperture are aimed squarely at Photographers rather than Librarians. The features are designed to help the photographer process the output from a shoot to a usable format, and the databasing is aimed at making photographs easily found. From your description the entire Photographers end is wasted for you. It’s the DB that’s of interest.
    To your specific questions:
    --The sidebar data input area displays in very small font size, which makes it difficult to enter and edit data efficiently. Is there a way to increase (to full-screen size?) both the image and data entry areas when working on an image
    Just like any app on your Mac, you can drag the bottom right hand corner to make the app full screen. No, there is no way to increase the size of the display font.
    As imported, the jpeg file number appears in the Title area. I would like to change the Title to a descriptive one; e.g., "Longthorpe Garden, front entrance," for future display purposes. To preserve the jpeg file number, I've been moving it into the Description area, following general notes about the image. In iPhoto is there a better place to put the jpeg file number? Could that field be sorted upon? Can additional fields (e.g., File Number) be added to the iPhoto file manager structure to customize it? Could that field be sorted upon?
    There’s no need to move the JPEG file number. That’s the *File Name*. It remains the File Name even though you add a title to the photo. You can search - either in the Search box at the bottom of the Window, or by using a Smart Album (File -> New Smart Album) on either the File Name or Title. The sorting options are in the View -> Sort Photos menu. You have more sorting options on more metadata in Aperture.
    --date: for the Conservancy archive the most important date is the date the photo has taken (1927, 1957, etc.). Currently I'm adding this date to the Description field, following general notes about the image, and before the jpeg file number. Is this the best (only) place to put historical date information? Can other fields (e.g., Date of Image) be added to the iPhoto file manager structure to customize it?
    Again, no need to do this. You can edit the date of any photo in the Information Window (click on the ‘i’ lower left) - the date field is perfectly editable.
    I think you need to look at other options. The standard database app on a Mac is FileMaker Pro. A little daunting at first, but it’s not too difficult to create a database structure that meets your specific needs. Other apps that you might look at include MS Expression, Extensis’ Portfolio. There are other options I’m sure: search on MacUpdate
    Regards
    TD

  • Creating z archive objects???

    Hello gurus,
    in one of my assignment we need to archive z tables.. its understood that we need to create z archive objects for them..we have differenct types of tables.. input, output and masterdata tables...
    1. can i create a single archive object for these tables.
    2. can i create a separate objects for input , output and master data tables
    <<removed>>
    Edited by: Matt on Feb 1, 2009 9:09 PM

    Hello my friend I have  the same situation in my case I have a tutorial of sap which I have read and I recomend you that you need to read in order to under stand archiving.
    in this tutorial there are some parts in which you can see some pages where it mentions some sample of writing, delete, reading archiving progrma  that there are in SAP system.
    Check this link and I think it can help you.
    In my case I do not understand all the code sample.
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/2a/fa043a493111d182b70000e829fbfe/frameset.htm

  • Uploading to FTP Host, getting stuck on Creating CSS Folder

    Please help

    The problem isn't connecting to the FTP host, it registers the source etc.
    The problem is that when it is creating the CSS Folder during the upload
    time it doesn't go past 89 percent. Muse is still responsive however. I've
    left it render 4 days in a row for the entire day and it stays at 89% I
    attached a screenshot of what I'm talking about. Please help, I did call
    godaddy and they said it wouldn't be the preference problem since I am
    already able to connect to the FTP Host through the settings.
    Please get back to me soon

  • How to create a new folder at the specified FTP location

    Hi everyone,
    Please guide me for the following query:
    How to create a new folder at the specified FTP location if the folder does not exists at that location through ABAP program.
    Please guide.
    Thanks and Regards
    MP

    Have a look at the function group SFTP. Use function module ftp_command to create the directory sending the mkdir command.
    Use the where-used list to find sample programs.

Maybe you are looking for