G4 - 1st problem since May 2014

Last night, the list of Recordings in 'MyView' wouldnt load ... and I also realised that a Scheduled recording wasnt running.
After 4 or 5 mins waiting, the box then wouldnt return from 'MyView' or even exit the YouView Menus .... it would however react to power off button & go into s/by - so I power cycled and it took a long time to 'wake up' and restart .....
Then it wouldnt populate the EPG, but did exit the menu and even changed channels OK, but as soon as I tried to view the list of recordings it just sat and spun waiting for the list to load ..... again a Power cycle / reboot (slowly) brought it back .....
This time I waited to see if it would complete loading the list of recordings - it did after 6 mins, and then took 2 to 3 mins to perform any other action to the list, like a deletion.
Decided to reset via the Settings Menu - after 35 mins it had done nothing but display the spinning wheel of dots.
Finally I did a manual reset with the buttons on top of the box.
That worked and it has been fine - except of course I've lost all my Judge Deed & Sharpe recordings and the final episode of Wolf Hall.
That aside and the work needed to reschedule the Series I want, plus 'hide' all the channels I dont want - is this the beginning of the sorry story one reads on here about the previous generation Humax/BT boxes ?
I'm quite concerned that it was 'disabled' so much that it wouldnt recover via a reboot or even perform a reset ....
Ho hum ...

loveAndPeace wrote:
Okay. How do I find the community ?
thanks.
One way is to go to this link:
<Dreamweaver support forum>
If you want other forums for different adobe products then you can start at this link:
<https://forums.adobe.com/welcome>
You can then search for the forum you are interested in.
good luck.

Similar Messages

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

Pathetic service, Bought on 17th May 2014 and within 13 days have so many problems but no resolution

I have bought Xperia Z2 on 17th May 2014 and have to visit service center situated in sector 18 Noida (Ambe electronics) on 26th May 2014 as my phone was getting heated up and restarting automatically, battery was draining and camera was not working, at the service center I was told that its just a matter of software update and it took 5 hrs to get things done at the service center, and the engg. at service center mentioned if the problem persists the phone would be put for replacement, on 31st May 2014 again I had to visit service center as same problem persisted and even internet stopped working.On receipt of my phone at service center they said we will keep it and update you the status on Tuesday we will call you to tell the problem. My question is if they mentioned it has to be replaced then same should be done rather that they again checking it for 2 days and confirming me the same.Worst part is service center doesn't have a manager whom we can talk to to get things fastened up and the staff at the service center is pathetic they don't know how to deal with customers. Biggest challenge is I have invested nearly 50K on the phone but within 13 days of purchase I have already made 2 visits to the service center and still don't know about my phone's status. Need Sony India to look into it and get the matter resolved on priority, we are buying Sony because of the brand and quality and not to make our own life miserable.
My Current Job number is: W114053102662
My earlier Job Number is: W1145052602690
Hoping to get a positive revert from your side and swift action to get my replaced new phone back with me as soon as possible

I am sorry to hear about your issue.You should contact:
1.Xperia care - http://www.sonymobile.com/global-en/support/contact-us/
2.A staff member - http://talk.sonymobile.com/t5/Welcome/Community-users/m-p/634967
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Sniffer Result Code: 3 / CUDA-Problems since Mavericks update

Hey Guys, first, thanks a lot for helping / or checking this out.
I have this problem since upgrading to Mavericks from Mountain Lion.
After upgrading I noticed there is a CUDA-Panel in my System prefs - which was new to me, having the classic onboard ATI Radeon of my MacPro.
Starting After Effects since then results in:
Last log message was: <140735271506704> <GPUManager> <2> Sniffer Result Code: 3
Generating crash log, which may take a few minutes.
then OSX tells me AE has stopped working.
System Specs:
MacBook Pro
15 Inch,
Late 2011,
AMD Radeon HD 6750M 512MB,
OSX 10.9.2 (13C64)
So it's the classic on Board graphics card and nothing NVIDIA/PC-fancy.
What I've done so far:
Installed newest CUDA-Version (even though, the system prefs plane tells me it needs an update, even when downloading the newest from NVIDIA)
Deinstalled and installed the whole CC-Suite, cleaned it, made a new admin-user, deinstalled again, installed on the news user (same problem), installed on the old one.
CUDA-drivers deinstalled from within the terminal (killing all relevant NVIDIA.kext and GeForce.bundle files), rebuild the extensions files with kext-utility.
Used disk-utility in the system and by rebooting with COMMAND+R, checked the volumen and the permissions, nothing Adobe relevant came back.
I'm kinda very stuck here...
Any help would be very welcome.
Thanks

The problem is that you installed CUDA software on a computer that has no CUDA-capable hardware. Don't do that.
You must remove the CUDA framework from your computer. See the last part of this article:
http://blogs.adobe.com/kevinmonahan/2014/03/19/avoid-installing-nvidia-cuda-drivers-on-com puters-with-amd-gpus/

PS CC (since JAN 2014 update) Layer-mask editing causes hangs/crashes

ONLY since JAN 2014 update, PS CC has been hanging/crashing when I paint/edit a layer mask. All may be well at first (or not), but suddenly the display of the mask (or mask overlay on the layer itself, as shown when hitting backslash key) is not shown in full but renders in s-l-o-w-l-y in rectilinear pieces <snapshot below was taken before video card upgraded but is still typical of what I mean>. When I view Windows' Task Manager for PS, I see my CPUs are each working at their upper limits (up to 80+-90+%), varying only by a few points, over a VERY long time... which could be MANY minutes. OR the System has decided PS is Not Responding.
In any case, whenever this happens, it means in all practicality PS CC is not working, so I either kill it or it's crashed.
Now, here's the thing: that VERY file, can immediately be opened in PS CS6 (which I have fortunately kept installed on my computer), and the mask will be as I thought it should be, and I can edit it as I always could, just fine! So it's obviously a PS CC thing, and I do NOT recall this happening prior to the JAN update. It is still a problem after the two subsequent updates.
I have not been able to determine the specific instances when this happens, as it seems to happen whenever I am editing a mask, no matter what size/softness/color brush, what magnification, what view mode, many or few layers, big or small file, etc.
I did upgrade my NVIDIA card (from GeForce GTX 260 [with current driver] to GTX660), just in case it was a factor (maybe kept it from crashing as fast? hard to tell... but it's still an unworkable problem). You can see from my Sys Info shown here from the PS CC Help menu that it should be more than sufficient for any PS CC task, and it's running the latest driver:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2664 MHz
Built-in memory: 16379 MB
Free memory: 12453 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 660/PCIe/SSE2"
gpu[0].RendererID=4544
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3221"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131219000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.16816e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]
I work on digital-photography files, and use a layer mask in almost every file, so this relatively-recent bug is a big PITA, having to switch back and forth between CS6 and CC!
Until there's a fix... is there a way to roll-back my PS CC version to BEFORE the JAN 15, 2014 update?

I am not qualified to comment on technical issues; I'm just a user whose son in IT is my 'technical support department.' (But he's not much of a PS user.)
I'm pretty sure, however, that all my Prefs were set to the same things BEFORE the Jan 16, 2014 PS CC update as after (unless the update itself changed something I was unaware of... the settings APPEARED to be the same but I can't easily locate my notes of what my Prefs were from long ago).
And they were the same as the PS CS6 I have had installed on this same system for a very long time, with older video card with older driver, with newer driver; newer video card with newest driver, etc. Yet after that CC update, CC has not (until this workaround) worked re 'the masking bug' for me, yet CS6 has always worked just the same.
So I conclude that the only variable (other than the video card upgrade I did in an attempt to solve this and of course those Windows auto-updates) in this scenario IS something to do with PS *CC*, and after Jan 16, 2014.
As for restarting the machine vs. restarting PS, well, PS is the major player of my system, so when I shut that (and LR) down, I might as well 'clean things up' by Restarting. BTW, I am in the habit of closing and reopening PS (CC or CS6) whenever I finish with a file and load another, in order to get back some of that memory which PS never seems to want to let go. (This is not new to the latest versions, I think. My son says it's a 'memory hog'? ;-) ) I track its memory use in Windows' Task Manager and find that seems to let it 'refresh' itself. (See, I told you I'm not a technical person. ;-) ) But I do not think this has anything to do with the bug. Just a quirk of PS. Like when a tool goes all wonky (for example, its little icon becomes just a 'plus' sign even though the tool is still performing correctly, it's telling me, I think, that it would like to be restarted. And that makes it feel all better... I mean, tool icon reappears.)
Anyway... it's up to Adobe to figure out IF and what may be wrong with PS CC -- it still doesn't work for me as I had it configured at first, and I think it should, right? -- and to fix that... PLEASE. SOON.

Problems since upgrading to v9.10

Has anyone else encountered problems since upgrading to v9.10?
Firstly there appears to be an issue with OLT no longer working in Firefox (3.6) as the "Build Scenarios" lists (select scripts) don't populate. Fortunately it still works in IE7, so I can at least revert to that.
Apart from that, what's more of a problem is that I've found some previously working scripts are no longer working in OLT (but I haven't yet found a pattern).
e.g. 1) One webservices script for product 'A' works, yet another for the same product comes back with "Orphaned agent" and "Failed to load script class for script X".
e.g. 2) A similar set of scripts for a different webservice 'B' also has one working and the other with the same errors generated.
e.g. 3) I have some web scripts that work, but others come back with the errors shown.
I have also noticed that if I attempt to run multiple scripts e.g. load a previously working scenario containing 12 scripts, none of the scripts runs (as the agent has failed to start because of at least one of the scripts). The same is true if I try and run a single working script with a single non-working script; both fail with the message from the non-working script (both would be using the same agent).
So far I have only tried converting a (new copy of a) single script to the v9.10 format but that didn't seem to make a difference. Pre-v9.10 scripts should still work in OLTv9.10 though; the conversion shouldn't be necessary.
I have tried the usual things (re-starting the services and even the OracleXE database). Any suggestions?

I too have FF3.6.3 but after signing in, I get the Build Scenarios page displayed but the "Select scripts & user-defined profiles" box with "Path: Scripts Only" list has nothing in it. Changing to "Scripts and Directories" makes no difference, still nothing is shown in the list. The repository should have multiple directories with multiple scripts (as shown when I try the same thing in IE7).
I now suspect this too may be down to some problem during the upgrade of the DB from v9.01.1 to v9.10 the odd thing with the script failures is the error doesn't seem to indicate anything wrong with the script itself; just that the agent failed to load the script. You get OLT Server Warnings that say "Stopped Autopilot because of error on agent "[name]" and the VU Grid shows my (single) VU with error "Failed to load script class for script [name]".
One particularly odd thing is that if I try adding 2 scripts in the same batch (a working and non-working one) with a delay between them the following happens:
1) VU1 with working script starts and completes OK (total time around 48s)
2) VU2 starts after delay (120s) but immediately comes back with the OLT Server Warning.
3) *BOTH* VUs on the VU Grid now show the same error about the agent (despite the 1st VU having completed sucessfully).
The agent seems to run happily with a working script until it is asked to load another (non-working) script which then kills the agent?
Here's the relevant section from the databaseConfig.log from when the upgrade was installed, as I suspect this is where the problem started:
+[Apr 16 10:21:42] INFO (SchemaUpgrader.java:43) - Starting upgrade for schema Oats+
+[Apr 16 10:21:48] INFO (SchemaUpgrader.java:50) - Schema Oats is version 9.01.1+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script db_users.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script init_ats_dbs.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script oats.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script oats_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt_sample_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm_sample_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4c Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.01.1.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:71) - Script upgrade-oats.9.10.1.sql matches the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script upgrade-olt.9.01.1.sql does not match the filter+
+[Apr 16 10:21:48] INFO (SchemaUpgrader.java:89) - Processing upgrade file upgrade-oats.9.10.1.sql+
+[Apr 16 10:21:48] INFO (SqlScriptRunner.java:51) - Running script file C:\OracleATS\data\scripts\en\upgrade-oats.9.10.1.sql+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:96) - Upgrade complete for schema Oats from version 9.01.1 to 9.10.1+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:43) - Starting upgrade for schema Olt+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:50) - Schema Olt is version 9.01.1+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script db_users.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script init_ats_dbs.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script oats.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script oats_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt_sample_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm_sample_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4c Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.01.1.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.10.1.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-olt.9.01.1.sql does not match the filter+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:101) - Nothing to do for schema Olt. Schema version stays 9.01.1+

Re: Leone's post May 2014 about how to best use an external drive with Aperture

I am trying to find Leone who had a great post May 2014 to Diane. I posted tho same message as a 'Reply' to the Leone/Diane posts but then was worried it would not show up since that was some time ago so I decided I should post it as new. Apologies if it comes through twice. I am having trouble as indicated below:
I found this response to the question about Aperture and external hard drives from last May. I bought a WD My Book 4TB and need to back up photos I have in Aperture (many!) to free up space. I am a photographer and need to be able to plug the external drive in as needed, pull a photo out from the WD and back into Aperture to work on it if needed.
I read your directions to Diane and have the external drive formatted Mac OS Extended (Journaled). I read the two ways you suggest to move part or all of my library to an external drive and still be able to use it in Aperture with all the metadata saved, as I need to continue to work with the images. I am not completely clear about the advantage of the 'referenced' method but decided to go with the Split Library because it sounded like the Referenced method would still keep originals (and take space) in Aperture. I'm not sure about this, but that was what I chose.
I have backed up my computer, formatted the drive then went to Aperture to begin. I do the 'Export' and it shows the external drive it will go to but when I click 'OK', it says "EXPORT LIBRARY FAILED - Library could not be create because the file system of the destination volume is not supported." I doubled checked to be sure the drive was Journaled which it was. I did call WD and talk to them but they told me this was outside their area.
Also, in Aperture, I have my photos in Projects by yymmdd. Is it possible to transfer Projects into the ext. drive without having to break them out of the Projects?
Any direction anyone might give would be greatly appreciated, Sandy

Hi Sandy,
I suggest taking a week or two to get to know Aperture better before proceeding. Aperture can do many things, and can do what you want. It's important to be specific about what you want, however. From what you've said, it appears that you don't yet know.
bybeeler wrote:
[1] I found this response to the question about Aperture and external hard drives from last May. I bought a WD My Book 4TB and need to back up photos I have in Aperture (many!) to free up space.
[2] I am a photographer and need to be able to plug the external drive in as needed, pull a photo out from the WD and back into Aperture to work on it if needed.
[1] A back-up is a copy of digital files stores on a separate device. A back-up is recommended because drives fail, and humans make mistakes. A back-up is not used to free up storage space.
[2] Aperture can be set up in many equally-usable ways. The program files reside (almost always) on your system drive. The data files can be anywhere you want them, as long as they are on locally-mounted drive(s). The main data file is your Library. The best place for it is on the drive that has the fastest throughput to your logic board. This is, in nearly 100% of machines, the system drive. But Aperture functions well with Libraries of secondary drives — internal or external — with sufficient throughput. USB-3 and Thunderbolt I (& II) provide sufficient throughput for using an Aperture Library on a secondary drive.
Nearly all photographers will fill whatever storage space is available (making data is what photographers do). The question is: what do you do when your Library no longer fits on your system drive? (And remember, you should leave at least 10% (I recommend 20% for heavy users of Aperture) of your system drive free.) The answer depends, primarily, on whether your computer is portable or fixed in location.
If fixed, just buy a more-than-large-enough secondary drive of USB-3 or faster throughput, mount it permanently, and move (using Finder) your Library to it.
If your computer is portable (and you can't increase the on-board storage), you have to select the best from several confusing alternatives:
• Put your Library on an external drive with throughput at least as fast as USB-3
— Pros: Easy to maintain and back-up.
— Cons: Must have drive with you in order to use your Library.
• Leave your Library on your system drive, but relocate your Images' Originals to an external drive.
— Pros: You can work on your Library without having the external drive available.
— Cons: You can't export (except Previews), Print, or make adjustments until your external drive is mounted. Significantly more difficult to administer, especially importing and backing-up.
• Leave your Library and and _some_ of your Images' Originals on your system drive, and relocate most of your Image's Originals to an external drive.
— Pros: You can do any work on those Images whose Originals are stored in the Library regardless of where the external drive is.
— Cons: Yet another level more difficult to administer.
If you are comfortable with the administrative overhead, the third set-up will be the most rewarding. Keep all _current_ Images Originals inside your Library, and routinely relocate the Originals of Images no longer current to the external drive.
In no case is it recommended that you at any time remove from your Library an Image (not the Original — the Image in Aperture) that you expect to ever use again.
HTH,
—Kirby.

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big

Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big and I can't change it with smaller. Apparently Ai said me that comes from AiPrefs... Could you help me please.
I tried to initialize my preferences but nothing change.
PS : Sorry for my English, I'm French
Pierre

Pierre,
You may try the list and see how far down you need to go; you have probably been through 1) and 2), and 4) is both reversible and more thorough than 3); 5) is hardly relevant, so you may end up with 6).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Why won't my orders go through?I had no problem until March 2014 now I get charged and no coins or nothing happens after it says it went through

Why won't my orders go through? I had no problem until March 2014 then I got charged 7 dollars plus and got nothing. No coins. I put in a new credit card today it said it went through but got no coins

    Motherto2, I'm sorry to hear that you weren't able to turn your phone on! I know how important it is to rely on a phone, especially when traveling. I'm hoping this issue has been resolved, but if you still need assistance I can provide a few steps. First try clearing your system cache.
1. Boot into recovery
   o Press and hold Power, Choose "Restart" option
   o When screen turns off, press and hold Volume Down and Power
2. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
3. Press the Power button to select “RECOVERY.”
4. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
5. Using the volume button, scroll down to “Wipe cache partition” and select it.
6. Select "Reboot system now"
If this is still not going thru, attempt an alternate master reset. http://goo.gl/MSrgE
If your phone is still not booting up after these steps, the device may need to be replaced thru warranty. Let me know if you still need assistance.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Patches installed since May 31 have wrong install date - always Dec 2005

Using updatemanager to display installed patch information I discovered that for many of the installed patches the latest version claims to have been installed last December while previous versions were installed at various times this year.
For example:
119082-15 installed 2006/05/13
119082-16 installed 2006/05/28
119082-20 installed 2005/12/24
But according to the patch log rev 20 was installed on July 24 2006.
Going through the patch logs any patch installed since May 31, ie in June, July, shows an installation date of 2005/12/x where x is the correct day of the month
Where does updatemanager get this information from?

Thanks to the support folk we have determined what is happening though not the exact reason why things started going wrong.
It seems that some patch/patches applied in June, possibly related to locale or at least affected by locale, changed the way pkg information was stored in the pkginfo database - specifically the installation date used full month names instead of three letter abbreviations.
[updated to correct the above. Actually it seems the full month has always been used. It was just that May, being only three letters long worked correctly regardless, so I only noticed the problem for June.]
Updatemanager uses the /usr/lib/patch/list_patches script to generate the patch information that it uses to generate its own display. That script assumes three letter month names and if it doesn't find it then a month of 00 is specified. Consequently the installation date for a patch becomes 200600nn where nn is the day. By chance/coincidence/design the zeroth month of 2006 is treated as the month before the first month of 2006, which is December 2005. As a result all the patches which generated a 200600nn date get displayed as nn Dec 2005.
As I said it isn't clear what patch (or combination of patches) resulted in the changed date format. There is a CR 6285720 that is somewhat related in getting the list_patches script updated to handle different date formats. Meanwhile you can edit the script directly to use:
case "$MONTH_ENG" in
Jan|January ) MONTH=01;;
Feb|February ) MONTH=02;;
Mar|March ) MONTH=03;;
Apr|April ) MONTH=04;;
May ) MONTH=05;;
Jun|June ) MONTH=06;;
Jul|July ) MONTH=07;;
Aug|August ) MONTH=08;;
Sep|September ) MONTH=09;;
Oct|October ) MONTH=10;;
Nov|November ) MONTH=11;;
Dec|December ) MONTH=12;;
* ) MONTH=00;;
esac
Message was edited by:
davidholmes

Serious overall loss of performance since cc 2014

Hi guys
While the last version of CC was working flawlessly on my mac, since the 2014 update its not the case anymore.
I really lost in performance with the "last" version and CC 2014 is at best really laggy and unstable when i use it.
I've ran multiple cleaner software, uninstalled and reinstalled, checked a lot of forums yet no answer for this unwanted lost of performance ...
Any kind of hint would be great. Thanks.

Hello Crispe,
Could you please share with us the test file @ "[email protected]" so that we can reproduce the problem at our end? Please be assured that your test file would solely be used for reproducing the issue and won't be shared elsewhere.
Please include the link (CC 2014 - another noticeable degradation in performance) in the mail you send.
Regards,
Dhirendra

I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this?

I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this? I just do not want to loose any data. Thank you for your help.

you should always make a backup of data regularly, especially when upgrading to a higher version of OS X. Just because it's free has no bearing on it giving anyone any problems. The only concern you may have is not all older programs will work with 10.9 that do with 10.6. Check here to see if you have any programs that would not run in 10.9: https://tidbits.com/article/12156

My icloud just stopped auto backingthings up...nothing saved since May 18...why? how can I get it working?

my icloud just stopped auto backingthings up...nothing saved since May 18. Why? how to fix it?

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

User should not delete Sales orders in CRM before May 2014.

Hi,
We have requirement in CRM i.e. user cannot delete Sales orders before may 2014 in SAP CRM.
Recently we have implemented Credit Check management in ECC (Cash n Carry Process especially for some customers)
Normally we do create orders in CRM it should be replicated to ECC, based on FD32 credit value in ECC, CRM order should give credit check massage.
go through the below notes n help us where to change BADI in CRM, plz.
We like to add a scenario where prior to April’14 period, user can not cancel/delete any order in CRM, so that the order cancellation data will not flow to SAP and below problem can be resolved.
While checking the credit Exposure of the INDL Customers, we found in some cases, user has deleted few old orders in CRM which creates a open sales order value as Negative in SAP System. Due to this for a customer, if there is ZERO credit limit, ZERO outstanding, ZERO liability, Credit Exposure is become Negative as open order value is there. In CRM order is being raised and credit block is not appearing if the order amount is below the Credit exposure.
Request you pls maintain the open Sales order value as ZERO for the INC customers (as per attachment list) for those who have a NEGATIVE open sales order value.
For the open Sales order Value which are POSITIVE, keep these as same as these are customer’s actual & current open orders.
NOTE: If user delete before may 2014 sales orders, all the deleted order values will be added to FD32 (Credit exposure -Negative),then user can able to raise sales orders for that value also.(It cannot be happened)
Regards,
JK

Hello JK,
I guess you can play around with the standard. You need to create a separate PFCG Role which only contains sales order related authorization object. Basically removing sales order related authorization object from the main primary PFCG role. And then controlling the secondary PFCG Role which only have sales order object. Controlling sales order PFCG role with validity period. Below is the screen shot of the PFCG role where you can maintain the validity period of the PFCG role for the specific user assigned to it.
I hope this solution was helpful for you!
Regards,
Neha Gupta

G4 - 1st problem since May 2014

Similar Messages

Maybe you are looking for