Hardware with VMware requirment

Hi alls
i am new in RAC and want to know something very begginers question.
I want to mock up RAC implemtnation within my PC with vmware.
Which VM ware server would be sutiable if
I have OS RHEL 5 for two node machine?
I have standard edition 11g rel 1?
what hardware requirment i would be need in terms of RAM,processor speed,hard disk space etc using VMware.
Thanks

The latest VMware server release should do. RH 5 was supported starting with VMware server 2. Any software that can run on RH 5 will work. The virtualization layer in your case happens between the Windows OS and the VM OS. Any software that can run on RH5 will be able to run on the VM. It's transparent that it's a VM. VMware Server has a lot of overhead because it's a virtualization layer between the OS running on the hardware and the VM (BTW, VMware ESX server, it's enterprise solution can run bare bones). I think that you should go with at least 3 GB of RAM considering that you'll probably have a small database for testing purposes (and I wouldn't go with more than 2 instances). Think about how many layers and how much you'll be running. Expect it to be very slow. You should go with a quad CPU since the PC will be doing a lot of multi-tasking and you'll probably want the faster CPUs as well. I'm not sure what you're planning on doing with the database but the standard Hard drive size should be sufficient enough for everything, but you'll have a lot of IO overhead, so get the top of the line harddrive.

Similar Messages

How to: IT Virtualization career with VMware as rock-solid foundation

Hello all,
I'm considering exactly what the title says. I've spent the better part of the past month reading/watching about the topic. I mainly researched the VMware product line (really, an ecosystem), along with Certification paths. I'm leaning towards the main DCV dish, with a side of CMA as needs come by. I am now building some sort of 'plan' for myself, contemplating the next 2-5 years or so with a VCP6-DCV goal in mind. There are a number of questions I need to ask to the actual pros, though. (highlighted in bold for anyone wishing to skip the following wall of text)
First of all, I'm heavily questionning my background. I wish it were enough to dive deep into vSphere right now, but is it? I mean, beyond VCA... I like to think "I can do this, I'm good admin material, I know it", but would an employer see it through the same lens? Probably not. My question is, would you hire ─ at the bottom of the IT/VMware ladder of course ─ this individual? Here's a quick, honest-to-god profile (please skip if you wish as none of this italic part speaks of VMware).
I'm 32, male, I live in France (but plan to move abroad to a more dynamic region, in terms of technology and the economy in general).
My 'official' pro background in IT is fairly limited ─ back in 2005 I trained & worked (at the same time) for about a year and a half on general admin/network. So, mostly windows 2000-2003-XP, general IT concepts; we had an HQ with about 30 users and 30 distant sites (car rental company present all over Paris), everything VNC'ed to the server room which hosted a dozen Dell Edge something (distant profiles etc.). Applications such as MS Office or credit card payments (Wynid) were served virtually through Citrix, and I had the opportunity to even run it at home in my lab to learn. It was back in 2005, but the basic concepts of networking, directory management or virtualization seem pretty clear to me, even as of 2015.
At that time I was young. Well, younger, at least. When I realized that what needed fixing weren't really the computers but the users (j/k... or am I?), I cut short my IT experience and did other, unrelated jobs, even spending some time back at the university to learn law and a bit of sociology (political theory, social interactions, things like that). Enriching, and I can use all of this to fuel my vision of technology, but now I want back in IT as a professional. It's an obvious vocation I've been ignoring for too long.
Ever since my teens, I've been dabbling in computers.
Learned Dreaweaver 3 with a bible in just over 3 months and made my first website back in 2000.
Since 2005 I've always had a windows server at home ─ it seems like it's not really my home unless it's a domain. I've been sharing coffee daily with ADDS ever since.
I like starting from scratch, designing and building entirely new IT systems (my home is my lab) every other year.
All my hobbies, at some point, got "computerized". For instance I learned everything I could about metadata for media/content files, from the Dublin Core principles to real-world popular DBs schemas (MusicBrainz notably) passing by actual implementations on my system, just because I need my music and video files to be properly sorted and browsed "smartly", you know... Also built a few home audio/video studios setups for friends...
Many people around me come to me for advice on technology, of any kind ─ I like science and tech, always reading up the latest and greatest, and apparently able to research what I have yet to know. I get good feedback on my advice, more often than not.
These are just a few examples of a trend in my life that says "I don't work in IT, but on a daily basis I spend a few hours, often having actual fun, with geeky-IT tasks, even just reading".
I'm extremely thorough by nature. Reading and carefully understanding, checking and applying a Best Practices whitepaper is often a paradoxical treat to me ─ it may be somewhat boring come page 14, but it's just beautiful when a system runs close to perfection, I often find a deep motivation for these ironing-out/optimization tasks. I'm also very practical, down to earth. I love ideas, I get my good share of it, but ultimately what matters to me are actual results ─ though I never rush things unless I have to, I'm infinitely patient with a project. I spend hours designing, testing (seeking real-world proofs-of-concept) so I don't mess up in actual production. I like things neat, sober and efficient, from variables to comments and names passing by external documentation ─ which I highly value, probably stems from my research-oriented mind. I do document my home setups to some degree!
Do these things matter? Do they help me, along with these certifications, or is my professional IT inexperience, at 32, the end of that road?
From what I've read, I'm fairly confident that with the right self-traning, hands on, I have a shot at VCA6-DCV. Practical questions:
I can get a good book, I can get online training, I probably can build a decent lab for virtualization at home. But how can I get hands-on with the software?
Evaluation doesn't seem like an option since it's limited in time.
Unless, maybe, one can get several trials as long as everything is freshly reinstalled. Being a lab we obviously don't care to break everything every 60 days or so, but does it work like this with VMware trials?
Is there any way I can run a non-productive fully-featured VMware ecosystem at home, just for the sake of training? (note: I'm willing to pay for that right, just can't or rather won't afford $2000 licences of course, I'd rather spend that on training classes)
I've discovered the fabulous VMware Hands-on Lab.
Is it really free, unlimited?
If yes, I suppose that's the recommended way to get hands-on VMware products?
Should it be the only way, how can I verify that my practices are good in the long run (days, months, years...) if I can't run the systems for more than a few hours? My understanding of IT is that making things work at first is only the prologue to a long day-to-day care and management of systems and apps, and I wouldn't want to miss that kind of understanding with mission-critical infrastructure such as virtualization. Seems like the mother of all critical-to-monitor and analyze/report/optimize etc. That doesn't happen in a few hours. I find myself puzzled by that apparent contradiction between training and real work.
Now, let's assume I pass my VCA6. Then what? How do I go from there to VCPx?
With my rather unconventional background, as seen from IT, can I land a level 1 vmware admin job if I get a VCA6-DCV? (I'm doubting, thus also considering maybe VCA6-CMA as well, to demonstrate *more* motivation and skills). I mean, are these VCA's even remotely enough, or should I brush up, say, on my Windows server/system admin and get a basic certification there before I aim at VCPx VMware certifs?
Assuming I manage, eventually, to have a job involving VMware datacenter products (ESXi cluster, vSphere, vCenter etc.), I understand that 2-5 years worth of pro experience are recommended to consider VCP-DCV. I assume a motivated individual, training at home on top of work, getting involved socially with the community and so on, would probably fall in the lower end of that range. From your experience, is being hands-on at work 'enough' to truly understand and master (read: work skillfully with) VMware products? (again, with VCP in sight) I'm asking since, more often that not, you don't touch critical settings, unless you absolutely have to, in a prod environment (for instance, if my company, back in 2005, hadn't allowed me to run citrix at home for a few months for training's sake, I just wouldn't have gotten my hands dirty enough with it to be able to administer it, later on this job). Which leads us back to my previous questions about hands-on in a lab environment. Which lab, where, and how?
And importanly enough, about how much would it cost me, overall, from VCA to VCP, including one mandatory class, and the necessary long-term hands-on training?
Sorry for such a long post but I wanted to hear back from the community with enough understanding of my situation. Please be frank and don't hold back, I need to hear the truth about my chances at this, and the sooner I realize how to proceed, the better. Currently, I'm beginning to train on ESXi and vCenter Server (awesome products, btw!) Any help in reaching my VCP endgame will be greatly appreciated, so thank you in advance for any light you might shed on my path.
PS: I apologize for any english mistake, it's not my mother tongue.

Thank you very much for your answer.
I think I do hear you. Assuming I can clear that first step you suggest (get a job supporting a company IT infrastructure, probably at the desktop), then I need to ramp up towards servers and eventually, it's somehow up to me to either help bring VMware to that company, or join another one where VMware is already present. And, as usual in business, ROI/TOC is the sinews of war. I suppose VMware, as a global IT leader, is somehow built on that premise. All of this makes a lot of sense to me. I think it will help me when making future choices. Very practical ideas are already popping up in my head.
I think, for now, I'll focus on
getting that first job in IT infrastructure,
while training for my VCA at home.
Then see from there. Regardless of my job, I can probably keep on self-training towards VCP ─ it never hurts to learn, and ultimately it may help me make the best out of a required class training.
Just a follow-up question, specifically about VMware and security. I'm digging this way because, thinking of your suggestions, here's one aspect of IT in particular that seems a very good bet to me. Here's the context in France (and several european countries):
Studies show that small and medium-sized french businesses (SMBs, up to 250 employees) have mostly missed the digital revolution of the last decade or so. The root causes go deep, as there are about 100,000 IT jobs available in France because of a lack of skilled workers, and the general population shows very poor technological culture overall. Thus, there's a lot to do in the backend to ease that necessary transition (cue for newcomers like me, willing to enter this market, I suppose).
More specifically, there is a huge need for security, which is, too often here, nowhere near acceptable standards. It would be easy to blame IT departments, but they in turn blame their CEOs for not understanding the issue ─ whose main reasons for negliging security are often misconstrued or outdated perceptions: increased cost, tediousness of the end-user experience; but more often than not, it's just blatant unawareness of the risks.
I think VMware delivers very good solutions to this issue.
Correct me if I'm wrong, but I understand that virtualization brings a layer of abstraction that makes it inherently superior, from a security perspective, to physical equivalents. And I think it's obvious the end-user experience, should it be different, is better virtualized than not. Therefore ─ you see where I'm going with this: if I had to show a company how VMware is interesting, not only for saving costs or ease of management/deployment, but above all in terms of security, what would be the main selling points, specifically? Also when training myself, which products, which specific designs or implementations or features, in the vast VMware ecosystem, are key to security if I want to bring that to my company? I'd like to have my eyes on that from the beginning. Basically knowing what to say when, one fine day, a manager/recruiter asks me: "how would using VMware be better for our security?" or "how will sponsoring you for VCP-DCV help us in this regard"? (again, rather from a small or medium-sized business perspective)
I'm thinking SSO, vShield and vSECR from the top of my head, but I confess the whole set of VMware server products and features is still a bit overwhelming to me. Obviously I'll do the bulk of research myself, I just need a few pointers.
Thanks again for the inspiration and support!

[SOLVED] No sound with vmware

I'm getting no sound with vmware, not sure why
Here's what I've been trying to test things:
$ cat /dev/urandom | aplay
Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
Here's some alsa info, if it helps:
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
sysdefault:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
front:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
Front speakers
rear:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC1
Rear speakers
surround40:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
4.0 Surround output to Front and Rear speakers
iec958:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
IEC958 (S/PDIF) Digital Audio Output
Last edited by specular (2014-08-27 19:52:45)

Don't think I was clear enough, but arch is installed as a vmware guest. Below is the requested output from the alsa-info script:
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.63
!!Script ran on: Wed Aug 27 18:29:05 UTC 2014
!!Linux Distribution
NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: VMware, Inc.
Product Name: VMware7,1
Product Version: None
Firmware Version: VMW71.00V.0.B64.1310020058
!!Kernel Information
Kernel release: 3.14.2-1-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.14.2-1-ARCH
Library version: 1.0.27.2
Utilities version: 1.0.28
!!Loaded ALSA modules
snd_ens1371
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0x1000, irq 19
!!PCI Soundcards installed in the system
02:01.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
02:01.0 0401: 1274:1371 (rev 02)
Subsystem: 1274:1371
!!Loaded sound module options
!!Module: snd_ens1371
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
!!AC97 Codec information
--startcollapse--
0-0/0: Cirrus Logic CS4297A rev 3
PCI Subsys Vendor: 0x1274
PCI Subsys Device: 0x1371
Flags: 4
Capabilities :
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
0:00 = 0000
0:02 = 0e8e
0:04 = 0000
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = bfbf
0:0e = bfbf
0:10 = bfbf
0:12 = bfbf
0:14 = bfbf
0:16 = bfbf
0:18 = 28a8
0:1a = 0000
0:1c = 0808
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 4352
0:7e = 5913
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 6 Aug 28 01:35 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 2 Aug 28 01:35 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 5 Aug 28 01:35 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Aug 28 03:28 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Aug 28 01:35 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 1 Aug 28 01:35 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Aug 28 01:35 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 28 01:35 .
drwxr-xr-x 3 root root 200 Aug 28 01:35 ..
lrwxrwxrwx 1 root root 12 Aug 28 01:35 pci-0000:02:01.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [AudioPCI]
Card hw:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 19'
Mixer name : 'Cirrus Logic CS4297A rev 3'
Components : 'AC97a:43525913'
Controls : 26
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 49 [78%] [-21.00dB] [on]
Front Right: Playback 49 [78%] [-21.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 23 [37%] [0.00dB] [on]
Front Right: Playback 23 [37%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Video',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 8 [53%] [12.00dB] [on]
Front Right: Capture 8 [53%] [12.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
!!Alsactl output
--startcollapse--
state.AudioPCI {
control.1 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.2 {
iface MIXER
name 'Master Playback Volume'
value.0 49
value.1 49
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -9450
dbmax 0
dbvalue.0 -2100
dbvalue.1 -2100
control.3 {
iface MIXER
name 'Phone Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.4 {
iface MIXER
name 'Phone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.5 {
iface MIXER
name 'Mic Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.6 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.7 {
iface MIXER
name 'Mic Boost (+20dB)'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.8 {
iface MIXER
name 'Line Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.10 {
iface MIXER
name 'CD Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.11 {
iface MIXER
name 'CD Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.12 {
iface MIXER
name 'Video Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'Video Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.14 {
iface MIXER
name 'Aux Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.15 {
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.16 {
iface MIXER
name 'PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 23
value.1 23
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Capture Source'
value.0 Mic
value.1 Mic
comment {
access 'read write'
type ENUMERATED
count 2
item.0 Mic
item.1 CD
item.2 Video
item.3 Aux
item.4 Line
item.5 Mix
item.6 'Mix Mono'
item.7 Phone
control.19 {
iface MIXER
name 'Capture Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.20 {
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1200
dbvalue.1 1200
control.21 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.22 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
comment {
access read
type IEC958
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.25 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.26 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
--endcollapse--
!!All Loaded Modules
Module
fuse
vmw_vsock_vmci_transport
vsock
nls_iso8859_1
nls_cp437
vfat
fat
coretemp
hwmon
joydev
snd_ens1371
mousedev
snd_ac97_codec
hid_generic
ac97_bus
gameport
snd_rawmidi
snd_seq_device
snd_pcm
snd_timer
snd
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
soundcore
usbhid
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
hid
psmouse
vmwgfx
ppdev
ablk_helper
cryptd
evdev
vmxnet3
mac_hid
pcspkr
vmw_balloon
i2c_piix4
serio_raw
ttm
microcode
drm
processor
i2c_core
intel_agp
intel_gtt
vmw_vmci
parport_pc
parport
battery
shpchp
ac
button
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
crct10dif_common
sr_mod
cdrom
ata_generic
pata_acpi
atkbd
libps2
ata_piix
libata
mptsas
scsi_transport_sas
mptscsih
uhci_hcd
ehci_pci
scsi_mod
ehci_hcd
usbcore
mptbase
usb_common
floppy
i8042
serio
!!ALSA/HDA dmesg
[ 5.342713] mousedev: PS/2 mouse device common for all mice
[ 5.345140] snd_ens1371 0000:02:01.0: enabling device (0000 -> 0001)
[ 5.391722] intel_rapl: domain package energy ctr 0:0 not working, skip
Last edited by specular (2014-08-27 18:45:55)

Trouble with installation of Windows 8 with VMware 9.0

When I start the installation of Windows 8 on a new virtual machine with VMware 9.0.
Here is the message:
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000005D
Parameters:
0x03060F0D
0x756E6547
0x49656E69
0x6c65746E
Can someone can help me?
Stephane Leblond, B.A.

Hi,
Please check if the method Carl shared helps.
Based on my understanding, the error message might be related to the hardware. If the method doesn't help, as it is a VMware virtual machine, please contact VMware support for further investigation:
VMware Support
http://www.vmware.com/support/
Thanks.
Nicholas Li
TechNet Community Support

SAP SSM 10.1, hardware and server required?

Hi
Please help me, what are the Hardware and Servers requirement for SAP SSM 10.1, can we use SAP BW 7.4 for this or any separate server or add on required??
Please also let me know weather cube builder and pas administration both can be used simultaneously for SSM??
Thanks and Regards
Rahul Sharma

Hello Rahul,
The 10.1 installation guide located on the Service Market Place > Release & Upgrade info > Installation & Upgrade Guides > Analytics > Enterprise Performance Management > Strategy Management > 10.1 lists the requirements. As well there is more information in the Product Availability Matrix, the link to that is in the install guide.
I would also recommend reviewing knowledge base articles 1954589 and 1979183.
As for using PAS and Cube Builder you can have both open but the limitations is that Cube Builder (along with Entry and Approval) use a model in Exclusive mode so you would not be able to work on a model in PAS at the same time you are working on it in cube builder.
Regards,
Graham

Problem with gross requirement planning pir is not getting reduced

Dear Gurus
I am trying to use strategy 11 for a particular finished product.(having bom and routing)
In the material master I have set mrp type pd lot size ex .strategy group 11, mixed mrp 2,item category group norm, availabilty checking group 02 .
Then I made manually pir for that material in md61 with BSF requirement type .
Then ran the mrp for that material in md02.
Planned orders came .(In md04 screen that gross requirement line text also came as usual )Converted them to prodn order and then did the gr in mb31 with 101 mvt type. After doing the gr the pir should get reduced in md04 screen which is not happening . Where I am going wrong
Regards
Sandip Sarkar

Dear Sandip Sarkar,
                                  It usually happens run MRP and ckeck.
Strategy 11 in summary :-
1. Sales Order creation - no impact.
2. Goods Receipt - minus the quantity for the oldest planned independent in demand management.
   For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
3. Delivery - no impact as delivery is issue from sales order.
This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
You need to maintain the following master data for the finished product:
Maintain strategy group 11 on the MRP screen.
Set the Mixed MRP indicator to 2 on the MRP screen.
Maintain the item category group (for example, NORM) on the Sales Organization screen.
Maintain the Availability check field so that you perform an availability check without the replenishment lead time (checking group 02 in the standard system).
Strategy                                                        10
Stock is taken into account                           Yes
reduction of planned independent
requirements takes place during u2026   u2026 goods issue for                                                                                delivery                                  order (discrete production),
11
Stock is taken into account                          No
Reduction of planned independent
requirements takes place during u2026            ... goods receipt for a production
                                                                        order (discrete production),
for a planned order (repetitive
                                                                         manufacturing), or for a purchase
                                                                         order (trading goods).
Edited by: Vachanala Rajasekhar on May 7, 2010 11:55 AM

Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

Hi,
the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
Is it possible. if so, can someone kind enough to point to me right directions?
Thanks in advance.

Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

How to map the bulk users with the required roles in portal at one time

Hi,
Would anyone tell me how to map the bulk users with the required roles in portal at one time?

Thanks for all the reply.
<b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
I tried the first option like
[group]
gid=
gdesc=
user=
Thr problem with this is I could n't put more no of users in the notepad.
I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
I tried creating seperate notepad but in Import it says "exists"
I'm not sure about LDAP. Would anyone explain me the best approach to do this.

Authorization to change BOM with history requirements

Hi Techies,
I m facing an issue now with respect to authorisation of changing BOM with history requirements. Our quality system was a copy from a production server which was used for CRM before. Usually in SAP when we change a BOM with a change number we cant again change it back without a change number.
In our case it is not providing an error but it is providing a warning. Now my requirement is to change this warning message to error message. So that people wont change BOM without a change number.
I tried to enter the transaction SU24 and found the authorizaton C_STUE_NOH with proposal YS. Then i tried to change the filed value to ' ' (NO) and saved it.
But still i m not able to change the warning message to error message.
Is there any other setting i need to carry out for this.
Please help me with this issue.
Thanking you in advance.
Regards,
Kris.S

Dear Krishu,
Below has been mentioned in OSS note: 420878. Check once again you have save as NO. Then go to tcode SU03 Object Class PP/ C_STUE_ROH
Summary
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
Regards / US

Compatibility of Adobe Connect 9 with Vmware

Is compatible Adobe Connect9 with Vmware ESX5 or only with ESX4? Thanks for your help.

VMware ESX 4 for Adobe Connect 9.
Source: http://www.adobe.com/in/products/adobeconnect/tech-specs.html

UCCX Advanced Quality Management with VMware View

Hi,
I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
There are a few issues that I would need to consider specific to their environment.
The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
Thanks!

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

Import the test results and doors links back to doors with NI Requirement Gateway

Hi together,
I will try to explain my problem:
We are using TestStand, DOORS and the NI Requirement Gateway.
We created a test specification in DOORS, TestStand used the DOORS IDs to connect the TestSteps in Teststand with the requirements in DOORS.
TestStand runs the test and creates XML-results, the NIRG is able to import these XML-results back to DOORS and creates a new(!!!) DOORS module, parallel to the said test spec.
This module contains some attributes like the single test steps, the results (pass,fail, whatever, ...) but now I am missing a relationship between the DOORS test specification and these results of the XML file or better, the XML-import in the new DOORS Module.
We want to manage our test results only(!) in DOORS so it should be possible to link(!) automatically the results of the XML to the DOORS TestSpec cause we are able to transfer the DOORS-IDs or other attributes (i.e.. The "un"unique NI ID#") too!
in ASCII-art:
DOORS_TestSpec -> NI_TestStand -> NI_Result -> DOORS_Result <--------- with LINKS to the DOORS_TestSpec!!!!!!!!!
Next Step is the DOORS Analyze Tool but we need the links to follow them and to show us the results.
Would be nice to know if somebody else knows the problem or perhaps someone has an other solution. Thanks for your time!
Greet

Regarding your statement "We will generate a chunk of XML-Results, so we are not able to link all the requirements by hand", are you concerned about having to update the path to the XML files each time you run the test? In this case, I would recommend creating a directory to store only the most recent report (the report path can be modified in the TestStand report options), and set the XML report project in Requirements Gateway to point to this directory. In your TestStand sequence, you could call code which moves the previous report file into a backup location so that only the newest file is in the specified directory. THis would prevent you from needing to modify the Requirements Gateway project to access the latest report; reanalyzing would reload the project with the new file. The traceability information will therefore always be up to date, and you can see that the DOORS requirements are being covered by the test results.
I agree that there is not really a good solution for importing the XML reports into DOORS, but I think you can acheive the result you are looking for using the report files directly.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

Open-vm-tools issues with VMware in Arch64?

Is anyone else having any issues with VMware Workstation 6.5 and open-vm-tools? I seem to have it installed properly, but my mouse isn't automatically disengaging or anything like it should. Do I need to edit my xorg.conf at all for them to be working properly?

E.g. just follow, if you didn't that.
Is there issue just with workstation or Server, Player too ? Dou you have issue with earlier vmware version ?
http://wiki.archlinux.org/index.php/Installing_VMware
http://wiki.archlinux.org/index.php/Ins … _in_VMWare

Split screen software of LG ultra wide monitor won't start with windows 7 installed with VMWare Fusion

I am using split screen sofware of LG but it is not working for me with vmware fusion 7. Is this a known problem? I am using an ultra wide monitor of LG (29um65), and installed windows 7 on my mac, by using VMware Fusion. But the software won't work of LG. It won't start. LG can't help me, because normally the software is working by using windows 7 on a windows pc. I got it also working on a mac , when I used other virtual software as Virtualbox VM, but it seems not to work with vmware fusion 7. Can somebody help me with this problem?

yes, I think you are right, but I used virtual box in the past, and had no problem with the LG software, so it has also to do wit VMWare Fusion I think.
Never the less we still don't have a solution :-)

Is it safe to install windows 7 in macbook air which just have 128gb of memory with vmware?

is it safe to install windows 7 in macbook air which just have 128gb of memory with vmware?

You need the USB SuperDrive or an USB disk to install Windows on the computer

Hardware with VMware requirment

Similar Messages

Maybe you are looking for