HT4623 i up to date my i pad and it ask to connect to itunes but it give me massage with recovery mode
i made up date my i pad and it dosen't open it ask me for itunes and when i connect it says that my i pad in recovery mode what can i do?
Is your iPad disabled?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Similar Messages
-
My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked. Any way to unlock and keep data? (apps, gaming levels, music).
Hi,
Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
xxmitchxx90 -
I just received my IPad and it will not sync with ITunes and my Mac doesn't recognize it any form. The screen is black with the exception of the annoying ITunes/USB cable graphic on the screen which appears momentarily and then disappears. Any ideas?
Things you can try first off,
is make sure you plug in your USB at the back of the mac, rather than for example keyboard.
Check out another usb cable.
Hold down sleep/wake and home button at the same time to reset iPad.
Make sure you have the latest iTunes installed or you may have to reinstall iTunes.
None of these work then I suggest you to take it to an Apple retail store for the genius guy to check it out. -
HT4623 tried to update my phone and now asking to connect to itunes
i have tried to update my phone to ios6 it is asking me to connect to itubes and now asks me to restore my phone to factory settings
Hi phaniemae528,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
Acquiring data from daq-pad and saving video at the same time
I am trying to record data from my daq-pad at 100 samples per second. At the same time I am using a usb interfaced camera to record a video feed. The idea is that when i begin recording data i also begin recording the video feed.
The way I record the video feed works fine in its own VI (I need it to record at 30fps and it does this just fine). But when I integrate it with the data record/capture VI the framing rate slows down to only 10 fps. I suspect this is because the VI gets caught capturing the data from the daq-pad thus slowing down its ability to record the video feed. I was hoping you could give me some help with how to record the data at 100 samples per second and get the VI to capture 30 frames per second. Thanks in advance for anyone who helps out.
I've attached the VI that has both the data capture and the video capture already integrated.
Attachments:
usa_swimming with video21.vi 892 KBHi,
I took a look at your code and the problem is that you have both the data acquistion and the image acquistion in the same loop. Have you tried using parellel loops? There is more information about this in the labview tutorials that are available online if you are unsure how to do that. The problem is that you are doing a lot of things in that loop (acquiring data, doing some analysis, and writing to file), so you can't acquire images very fast because it depends on the speed of the loop iteration. I hope this helps.
Have a great day,
GG -
my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
my phone is disabled and says connect to itunes but i want to recover my data's and pictures before restoring it with itunes.
You may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you haven't synced it to that computer before then you won't have a backup on it to restore your content from. Do you have any of your content on it for re-sycning and/or have you been backing up to the cloud ?
You can re-download your apps (if they are still in the store) via the Purchased tab in the App Store app, and you may be able to re-download music, films and tv shows via the Purchased tab in the iTunes store app. -
I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?
If you didn't back it up, your data is gone. There is no "solution" after the fact.
-
I cant download any app from appstore my pad notifying me can not connect to itunes whats happening
my pad notifying me can not connect to itunes store while am trying to sign in or am trying to download any app today only iam experienced please try to solve my problem
Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings. -
Hi I have iPhone 4 with iOS 6 and a week ago I stop ressiv or send SMS. I tried everything but I still can't send.. I erase the version and all the data on the iPhone and now I can send SMS. But when I'm downloading my buck up the problem happened again
Please help me cuse I don't know what to do and my cellular company don't have an answer
Thank uI have to ad that its not an easy problem I did all the action in the book.
It's something with my back up -
I've update my iPad to iSO6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory stting & all media & data will be ereased. I DOT NOT WANT THIS TO HAPPEN. What can I do?
You have no choice now. Unless you want a brick for an iPad. After you restore to factory settings you can restore from your backup ..... And you do backup don't you? I would never update the iOS software without backing up first. After you restore from the backup, sync with iTunes again and you should be OK. Assuming that you do sync with iTunes .....
Read this for info on how to restore from the backup.
http://support.apple.com/kb/ht1766 -
I have an i-pad and have just got an i-phone but want 2 use a different I cloud? I've set up new email account and apple ID, but I can't change the I-cloud settings, can u help PLS??
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
-
Hi, i received my iPad 2, and i tried to use my iTunes, but when I opened it, it showed itunes U and podcast only..no other data like in pc..just only that 2.What i will do? There is no download tabs or anything at all. Please help!
When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
Any help in updating my I pad would be greatly appreciate,
Connect to your computer and upgrade with iTunes
Allan
Maybe you are looking for
-
I have just purchased a new iPad2. We have an iPad and would like to transfer files that are in iBooks as pdf and doc to the new iPad2 without e-mailing each as a attachment. Any ideas?
-
Mail attachments won't save - saying folders are Read Only
Every time I try save an attachement, mail pops up saying this location is read-only, Any help?
-
ESS Accounting business packages
Hi Friends, We are planning to implement EP7.0.ESS accounting business packages. To implement ESS do we need to have SAP HR module implemented in our System or not required. if we are configuring the SAP Users in portal. Is there any chance to reduc
-
Put freehand options in to Illustrator
I am a Freehand user that also uses Illustrator. Now it is official that Adobe will not develop Freehand. We will all have to start using Illustrator exclusively. There are some tools that are much better with Freehand such as paste inside and punch.
-
3d not on menu in CS5 extended why is it not there?
I have CS6 extended on monthly rental from Adobe - there is no 3d list on menu and I think there should be-I cannot get an email address within adobe to address this