HT4759 connection error windows 8

I get a connection error when I try to login to icloud on a windows 8 pc

iCloud Control Panel or iCloud.com.. check your Internet Security Settings

Similar Messages

Wireless WRT160N Connection Error "Windows cannot validate certificate"

I installed and configured the WRT160N v.2 wireless router. My notebook running windows xp sees the network and has a good signal. When I try to connect, I get an error that "windows cannot validate certificate" or "validating identify". Does anyone know what the problem is and how to fix it?
Thanks...Rich

You need to change the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your new Wireless Network and attempt to connect...
If the above fails :
Please go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.Choose the Wireless Networks-tab and remove all the preferred networks from the list and click Add...Click the tab Authentication, in this window you have to choose Enable IEEE 802.1x authentication for this network and EAP type set to Protected EAP (PEAP?, now click O.k...
Try to re-connect to your wireless network, it should connect...

Error message when connecting to Windows

I have a newer Ipod, 4g, that Im trying to connect to Windows. I d/l the latest version of Itunes and installed but when I connect the Ipod, it says it has detected an Ipod in recovery mode and I will need to restore etc. I first did the restore and update as it said. It gave a message that it was successful but then the error message came back up. I looked online and it suggested I reset the Ipod itself, which I did but the message still comes up. Is there any fix to this or does it need to be sent in? The unit is just about new, no songs on it yet. It belongs to a friend of my daughter who asked me to put some songs on it for her.

I have the same problems. Also I sent my ipod to repair but nobody find anything. The only possibility to snyc is: Switching off pc, connect ipod with pc, starting pc and itunes and now I can sync. But after a while itunes comes up with the same error massage (recovery mode). I think some service from itunes or ipod does not start correct, but I do not know which one.
Has anybody an idea?

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
"iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
Any idea what may be causing the connection error in Windows Vista?

Hey TranceCadet,
This could be caused by a USB connection issue.
Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
http://support.apple.com/kb/HT2292
Jason

Crystal XI R2, Salesforce 3.0, Windows 7 64-bit, Java connection error

All,
I've got the same problem as this thread -- Re: CR XI R2: Salesforce 3.0 driver on Windows 7 64-bit?
Crystal XI R2, Salesforce 3.0 downloaded from the Crystal page. Using Windows 7 64-bit. Have applied SP 5 per another thread.
Continue to get JAVA error. Java being used is 1.4 as installed by Crystal in the Crystal program directory.
thanks, jhb

Don,
Still no go. I get the same error.
I uninstalled SP6, SP5, Salesforce Connector, and Crystal XI R2 SP2 and then re-installed everything.
1) Crystal XI R2 SP2
2) Salesforce connector 3.0
3) SP5
4) SP6
Still get the same Java Connection error. I've also disabled Windows Firewall. I'm not behind a proxy. I've tried with and without the security token.
thanks, jhb

IOS App 8.1.5 Remote Desktop can't connect to Windows 7 Pro after upgrade. Error 0x00000507

Nothing has changed between my network, Windows 7 computer or my iPad besides the upgrade of the ios app software to 8.1.5. Did not used to have any issues connecting but now when I try to connect, I get the above error when logging in.
I have tried reinstalling the ios app with no success and also confirmed I can still remote desktop to the PC from another PC with the credentials I've always been using.
I've also tried explicitly including the domain when entering the username with no luck. Looked through my Windows 7 event logs and can't find any more information on what this error means.
Has anyone seen anything similar or have any ideas what I can do to troubleshoot? Thanks!

Hi,
I have a same problem.
Although RD Client 8.1.4 worked great, now I cannot connect to Windows 7 Professional computer from my iPhone 5 (iOS 6.1.4) since the latest update.
Same as Twiggles, when I try to log in (just after entering username and password), the app gives me error code 0x507 "Disconnected from server".
Note that I connect to my PC over VPN using Cisco AnyConnect app.
After that, I've tried to connect to my PC in two different ways with same network settings as the above situation.
1. Use different remote app
I've tested free version of "PocketCloud" from Dell Wyse, and I CAN connect to my PC.
2. Use different version of iOS
I've tested the latest RD Client 8.1.5 on my another iPhone (5s) with iOS 8.1, and I CAN connect to my PC.
Therefore, I assume our 0x507 is not setting related, but probably some sort of iOS version dependent problem arise from the latest update.
Even though I tried PocketCloud, I believe RD Client is the BEST app for remote desktop for iOS.
I strongly hope this problem will be solved!
Thanks.

Windows ODBC connections error

I have oracle installed a client machine, linking to the server. When i sign into the server using SQL+ this works fine. However when i try and edit any ODBC driver connections in windows-control panel i get an error telling me that the networking components were not found. Also when i try to open the application that runs with oracle i get two similar errors.
The error boxes are as follows :-
little: Microsoft ODBC for oracle
Message:The Oracle(tm) client and networking components were not found. These components are supplied by oracle corporation and are part of the oracle version 7.3 (or greater) client installation.
You are unable to use this driver until these components have been installed.
2.Title: Database error
Message: IM004:[Microsoft][ODBC driver manager] Drivers SQLAllocHandle on SQL_HANDLE_ENV failed.
This is strange because i have the connection in SQL plus to the same server and the other client machines i look after are working fine.
Right before the crash the machine had Nortan antivirus 7.61 and a Disk Defrag on C:
To remedy this i have un-installed and re-installed oracle client several times with no look.
Any help would be greatly appreciated.
I have no further information about the Defrag of C: as our team did not run this, it was the IT support team we use.
Thanks in advance
Dave

I am trying to connect through ODBC to an external Oracle (Solaris) database from a Windows Server 2003 Web Edition machine. I am getting the exact same error scenario with the MS ODBC Driver for Oracle. I would love to use the Oracle ODBC driver rather than the Microsoft one, but OUI installation of it (any version) fails (with no explanation in the log) every time.
I am using Oracle9i Client 9.2.0.1.0 with Oracle 9iR2 Patch Set 9.2.0.3.0. Do I need to get rid of that and go back to an older version of the client? And, if I do, will it work with WIndows Server 2003 Web Edition? I know my attempted installation of an 8.05 client failed with no error information.
I have verified that %ORACLE_HOME%\bin is in the path and that the user has read/execute rights to %ORACLE_HOME%.
Thanks in advance for any help you can provide.
Bob Nelson
Spokane Community College

I have a Lacie External hdd and on usb 3. Now If I plug in the device it shows a message to connect to windows or mac (Parallels installed) so If I click on mac it works fine well and good but when I select connect to windows it shows a error.

I have a Lacie External hdd and on usb 3. Now If I plug in the device it shows a message to connect to windows or mac (Parallels installed) so If I click on mac it works fine well and good but when I select connect to windows it shows a error.
The error that pops up is:
The device "Lacie Rugged USB3-FW" was unable to connect to its ideal host controller.
Please anyone could suggest what the solution could be?
Thanks.

But my 1 tb hdd is already formatted via ex fat which can work on both mac and Windows no limitation of file size also like if we use ntfs or fat it has a restriction of 4gb file size.

ERROR TO CONNECTING MY WINDOWS PC

DEAR SIR I AM GETTING ERROR WINDOW AS LIKE " BLACKBERRY DESKTOP SOFTWARE CANNOT COMMUNICATE WITH THE CONNECTED DEVISE" AND SHOWING OPTIONS RETRY AND UPDATE AND CANCEL., AND I CLICKED ON UPDATE IT WAS NOT UPDATING... BUT MY PLAYBOOK ONLY 45 DAYS OLD, SO PLEASE SOLVE MY PROBLEM MY DEVISE S/NO. IS 1344-2383-4251 AND OS VERSION 2.0.1.358

If the playbook still works, don't touch the update option unless you really need it (see below) and preferably leave Desktop well alone. If Desktop says it cannot communicate, only an optimist would click on Update!
Use wifi to transfer data. It's safe. Ensure file sharing settings are all on and also set to "Connect-to-Windows".
If playbook is dead look up de-bricking, or call RIM support for them to walk you thru it.

"Unable to Connect" error continually shows up despite having reinstalled firefox and troubleshooting. How do I get firefox to work properly again? (windows 7)

I turned on my computer and before I could start firefox it said it was updating. When it said it had finished updating and there were no error messages indicating that the update had failed. When I opened firefox it pulled up the last tabs I had open before closing the program. None of the tabs functioned properly and gave me "unable to connect" errors even when I opened new tabs, no matter what the website was. Everything worked properly in internet explorer. I tried restarting my computer and firefox, troubleshooting, restoring firefox, uninstalling and then reinstalling firefox, checking my firewall and the problem persists. I've tried changing my proxy settings according the articles on the support page but nothing has worked. How should I fix this? Firefox is my favorite browser I would hate to give it up.

see: [[Fix problems connecting to websites after updating Firefox|Fix problems connecting to websites after updating Firefox]]
Also possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls

Errors connecting from windows

i try and connect from windows and it gives me this:
[2006/10/24 21:39:25, 0] pdbods.c:odssamgetsampwnam(2327)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'XXXX'!
funny thing is, if i connect using ADMIN and enter propper password, it works fine
it seems windows is trying to autofill the username (that is logged into windows) in the XXX field, and it doesn't match the server's account name.
thanks in advance!!

We're having something similar to this where Entourage users are apparently handing off the incorrect user name and password and thereby disabling their Apple user account on our mail/webmail OSX server.
I don't know how to stop the accounts from being disabled, nor do I know when the user has been automatically disabled by the server. We only know when the customer contacts us (which can't be by email).
This has already cost us some accounts and business.
Users who are not Windows or who are not using Entourage are having no problem. Since the problem also happens with Mac Entourage users, it may have more to do with Entourage than Windows.
Anyone know how to set the authentification of OSX or Entourage to be more friendly?

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

Haven't been able to connect to itunes for 3 days. Says connection error but im connected to the internet

I haven't been able to connect to itunes for 3 days. It says theres a connection error, yet I am connected to the internet. I have redownloaded itunes and still get this message.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I have a netgear router that I am trying to hook up to my emac and I keep on getting connection errors messages on the emac. why?

I recently received an eMac as a gift from a friend. I am having some problems setting it up. First, for some reason, I cannot get my osX disks to install onto my eMac. the eMac tells me the install disk is not bootable. Why would that be? So, I have os 9.2 installed on the eMac. I have the eMac connected to a netgear router, and when I set up all the ip settings in the eMac, I get connection errors. I do not know why. I can easily hook up any windows computer to a router, but when I try to connect an Apple Computer to a router or an ethernet modem, I always get connection errors. Why? What am I doing wrong? In the Apple System Profiler, the eMac tells me that it cannot identify the router. Why would that be? Do I need a special eMac driver for my netgear router? I have tried to find such a driver, but am having no success. I need help! Can someone please help me? I really want to use this eMac! But if I cannot get it set up for the internet, it is going into the junkyard! I really don't want that!

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

HT4759 connection error windows 8

Similar Messages

Maybe you are looking for