I am having hp 4500 g510h printer, in control panel display it is showing "redial in 0" if

i am having hp 4500 g510h printer, in control panel display it is showing "redial in 0" if we press it will show busy in the display panel.
This question was solved.
View Solution.

This was quite a pain to solve, and as my client's printer was out of warranty HP telephone support wanted at least $20 to even try to fix it.
Anyway, I was able to fix it myself by hard resetting the printer:
1) unplug the power cord
2) hold buttons '#' and '6' as you plug it back on
3) while still holding, power on the printer
4) after a few seconds, it will show semi NVM reset or something like that, and start the factory default setup (pick language, align cartridges, etc.)
You should be able to access printer functions again as usual after that.

Similar Messages

  • HP LaserJet M1120n Multifunction Printer, control panel display

    Hi,
    Yesterday here was an electrisity cut. After that all devices worked normally, except the printer. Control panel display of the printer was out of function and control panel buttons  didn't work.
    I turned  the printer off and waited some time. After that I tried to restart the printer. I heard that the printer started, but the display didn't work though, even I waited couple of hours . How could I solve this problem and can you help me?
    BR Vesa

    Hi @Vesa57 ,
    I see that the display isn't working on the printer since you had a power outage. I will certainly do my best to help you.
    Can you still print to the printer?
    Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
    The printer shouldn't be exposed to any electric or magnetic field.
    Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try another wall outlet in another room, on another breaker. Just to make sure that isn't causing the issue.
    Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded

    uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded@

    For starters, what exactly do you mean by "cannot print"?
    Are you getting an error message? Are you trying to print from within Reader or are you opening these in the browser? What version of Reader. Even though it's a new printer, the drivers that came with it (or the ones that were already on your computer) may be old so, have you downloaded the most recent drivers from the Brother site?

  • I'm having trouble signing into the iCloud Control Panel.  None of the iCloud suggested fixes work.  I'm using Windows 7 on a PC.  Is there a simple fix out there?

    I'm probably doing this all wrong.  Just in case here it is again.
    I'm having trouble signing into the iCloud Control Panel.  None of the iCloud suggested fixes work.  I'm using Windows 7 on a PC.  Is there a simple fix out there? 

    asdfjava-er wrote:
    The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
    asdfjava-er wrote:
    Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
    Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
    a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
    "Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help.

  • Print & Fax control panel takes 1 MINUTE to open, delays app launching too

    Hi everyone,
    This one is driving me nuts. The Print & Fax control panel takes around a minute to open even after deleting all printers. Application launching is delayed for a similar period (if the app accesses printer info on startup I presume). Has anyone experienced this before? Any tips or suggestions gratefully received...
    ~ Rodney

    Just documenting this in case any one else out there arrives at this thread with the same issue....
    Some progress. Deleting all printers, resetting the printing system and running disk repair didn't do the trick. However downloading Printer Therapy (http://www.fixamacsoftware.com/software/pt6/) has assisted. After restart there is still a 1 minute delay launching many applications (presumably while they try to connect to print system) but whereas this happened for every launch before, now it only happens for the first application launch. If I manually start the cupsd daemon this appears to take 1 min to start. After this everything is fine. My working theory is the issue is somehow related to cupsd. Does anyone know whether this process is normally started the first time an application connects to the printer (even though, in this case, I have no printers defined at all).
    I have no idea why cupsd is taking so long to startup, I have reset the cupsd preferences (using printer therapy) and permissions, deleted all temp files etc. Any additional suggestions/recommendations would be appreciated.
    ~ Rodney

  • Printing a control panel at a specific time of day automatica​lly

    I would like to be able to print out a control panel at a set time each day. I know that I can connect the print data member of the panel to another object. What should that object be?
    Thanks

    Try the "Time-Of-Day" object. Its parameters are on/off, Offset time, duration time and format (all parameters are “yellow” fields except format, which means you can use other object data members). On/off lets you disable the timer, offset time is when in the day to activate the timer (i.e. 17:00:00 for 5:00 PM), duration time is how long to pulse the timer (to tickle a panel to print you would only need 00:00.1) and anything would do for format if you don't intend to display the timer (00:00:00 would be appropriate if you display the timer). Connect the Time-of-day object implicit data member to the panel object writable print data member and you are done. When the offset time is the current time the time-of-day object pulses and the panel prints. Be aware that the area of the panel that prints is based on the Height and Width parameter values, not the position on the screen (the X and Y data members override the parameters if connected). There is more info on timers and panels in the on-line help.

  • HP Officejet Printer 6835 control panel not working

    Am trying to set up my new printer (HP Officejet 6835 All-In-One) but the control panel is not working. Followed directions, plugged it in and turned it on but control panel is black. Am I doing something wrong or do I have a faulty printer? Tried turning it off and unplugging with no results. Any help would be appreciated!

    Hi @colljerr,
    I do not suspect you are doing anything wrong. Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
     If you have the printer connected to a wall outlet and the issue persists, I suggest calling us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to install Adobe as a printer in control panel?

    I just changed computers. On my old computer, I was able to select Adobe in the printer list to save a document or excel file as a PDF file. However, on my new computer, I am not able to figure out how to get Adobe installed in the printer list. I'm running Windows XP Pro and cleanly installed Adobe Reader 9.0. I have searched the support and forums on this site but am unable to find my answer.
    Any guidance will be most appreciated.
    Teresa

    >I am not able to figure out how to get Adobe installed in the printer list
    Easy. Install Adobe Acrobat. Reader doesn't come with the PDF printer.

  • Unable to scan from the printer control panel to my computer using the HP Photosmart 5510

    Hi, I recently purchased the new HP Photosmart 5510 All in One --- and I’m not able to scan from my printer to my computer. I am however able to scan by initiating the scan from the computer. I spoke to HP customer care earlier this evening and we ran the print + scan doctor and did not find any problems. I’m running Windows 7 – 64bit and have installed my printer wirelessly using the Installation CD that came with the printer today. I wasn’t able to finish troubleshooting with the technician I spoke to because I had to leave for work. The Person I spoke with suggested possibly downloading the Full Feature Software from the hp.com website, which I’m happy to do but I feel that it is unnecessary because I have the install CD right here. (The rep I spoke to was very nice but I’d rather not have to uninstall and reinstall if it is not necessary) Because as I mentioned above, everything else works perfectly and I am able to scan --- just not directly from the printer itself.  When I'm trying to scan from my printer to my computer an error message comes up on the printer's control panel stating that: there is no scan destinations selected/no scan options. However, I can not find anywhere with my HP software where I could add/ensure that the destinations were there. (Like I could on my other printers. (Ie. Through the Solution Center) This printer does not seem to have a Solution Center that I could find and the Scanner Icon that was installed with the CD does not give me any options in terms of modifying the scanner settings I’m wondering: 1. Does the Hp Photosmart 5510 not have the capability to scan from the printer’s control panel? 2. OR Does the install CD that came with my printer only have the basic drivers like the tech support agent suggested? Which means in order to scan from my printer I’d have to download the drivers from your hp website? 3. Or is the issue due to something else completely?  Thanks for your help! 

    Hi Dublin, Follow the steps below to uninstall and reinstall the printer. 1. Open Control Panel2. Click on Uninstall a program3. Uninstall the Photosmart 6510 from the list4. Reboot your computer5. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html 6. Download the full feature software and drivers, and then reinstall the printer. Version 28.8

  • HP Officejet 4500 will print but won't scan - MAC OS 10.6.8

    Hi
    We've been using our HP Officejet 4500 for about 3 years with mostly no issues. Recently, we were having some issues. We uninstalled the software and then used Apple Software Update to reinstall. Now the printer works perfectly for printing wirelessly. But scanning is not even an option. I cannot scan from the control panel on the printer. When I go into system preferences, the little printer icon says "Print & Fax", not "Print & Scan" and there is no scanner option to be found once I am in "Print & Fax". I used to have an HP Scan program on my Mac that I could open and scan from there but now that is gone. The HP website tells me to simply use Apple Software Update for drivers and software. Apple Software Update tells me I have everything I need. I have performed "Repair Disk Utility", rebooted, deleted the printer and added it again. 
    Please help. Thanks.

    Hello @Yakbihn ,
    Welcome to the HP forums.
    I understand that you are having problems scanning with your officejet 4500.
    I would like to help.
    HP Scan software is not available through Apple Software Update (ASU) for some HP Multifunction Printers.
    And as you and I know, The Drivers are not available on HP.com.
    There are still ways for you to scan.
    The links below are for a laserjet and the other 10.9
    The steps will be the same.
    HP LaserJet MFP - Scan in OS X 10.9, 10.8, 10.7, or 10.6
    Scan from OS X v10.9 Mavericks
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

    I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9.  I am having trouble printing online maps from either Bing Maps or Google Maps.  It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
    I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine.  I do use the “Print” button located in each of the online Map sites (Bing, Google).  This is when the jobs get stuck.
    I do also have the HP Bing Bar installed with Smart Print.  The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
    Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature.  I can never get those to print (have to wait for the PDF statements to be available).
    Any ideas as to why I can print the maps or online financial transaction?  I get no error messages either.

     Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • Unable to print from Internet to HP Officejet 4500 Wireless printer.

    I have a new HP Pavilion g6 Notebook and an HP Officejet 4500 Wireless printer.
    The printer will print regular documents OK but will not print directly from the Internet. I get a message that says 'an error has occurred in the script on this page'.  If I save the Internet page to a document file, it prints OK.  Any idea how to fix this?

    I had the same problem.  The printer worked fine with all my documents, but would not print anything from the internet.  I tried several fixes that didn't work.  Then I realized that I was using the 64 bit connection and when I switched to the 32 bit the problem was solved.

  • Officejet 4500 wireless printing problem

    We have an HP Pavilion g7 laptop that has always worked great with our 4500 wireless printer.  Now the computer says the printer is offline.  The wireless button is blue.  The computer hard wired to the printer shows that it is online.  What else am I missing?  Can anyone help?!?
    This question was solved.
    View Solution.

     Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HOW CAN I DOUBLE SIDED PRINTING ON MY HP ENVY 4500 SERIES PRINTER

    I  recently bought my HP ENVY 4500 series printer and love it.  The only problem I have is I can seem to work out how to do double sided printing, cant see any options and the booklet doesnt tell me...maybe  I am missing something. Please help! I hate wasting paper

    have you already installed the software for the MAC?
    what is the OSX version of your MAC?

Maybe you are looking for