I cannot get my ipad2 to work it won't let me put anything on to it and comes up with a picture of a usb cable and a music note and will not let me do anything

hi my son as resat my i pad 2 now i cannot get it to work i have tried to start it just as you would a new one but all i keep getting is a picture of a u,s,b lead and a music note it does not respond to any thing i try plug it into my laptop to set it on its way but still nothing

That means that you have to connect the iPad to iTunes on your computer and restore it with iTunes.
Read more here.
http://support.apple.com/kb/ht1414

Similar Messages

HT1267 I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????

I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????

Connect your iPhone to iTunes and restore or follow the prompts.

I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

Here's a good troubleshooting article about imessage "waiting for activation".
http://support.apple.com/kb/TS4268

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply

I received an error message when updating my iPhone that the update failed. My phone is now locked up with the iTunes icon and a picture of the USB cord on the display. It will not reset or turn on, what do I do?

My iPhone will not reset and is no longer recognized in iTunes. Any suggestions?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

My Apple TV couldn't connect to my network. I restarted it and now it is stuck on a screen with a picture of a USB cord pointing to the iTunes icon. Not sure what to do next.

I Checked my network, it is working properly. I tried unplugging the Apple TV. It's still showing the USB.

That image means you need to do a restore. See Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support for more details.
You will need a USB cable with a micro-USB connector on one end.

HT201210 My iphone had an error while updating. Now it is stuck with a picture of a usb cable & an arrow pointing to the itunes logo. I can`t get itunes to recognize the device

I just bought my iphon last night & tried doing it`s first update this morning. I got an error message that the update failed & now my iphone only shows a pic of a usb cable with an arrow pointing to the itunes logo.
I already tried holding down the on off buton & the home button like the instructions say. Problem is that when the instructions say I should be at the part where itunes is again recognizing my iphone, my itune is not recognizing my iphone. So I am stuck. I follow the instrustions, but the resluts are different, so I can`t continue to the next step. Very frustrated, as the nearest Apple store is over an hour`s drive away.

Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware. If the process Errors again, write down the error message and error #, on paper so you can solve the problem. If there are serious problems, all iPhone 4S have full warranty coverage with Apple.

I cannot get any TAGLIBS to work

I cannot get any taglib to work on my install of TOMCAT 4.0.1. I have even downloaded WAR files that from the jakarta taglibs project for their examples and they fail as well. Can anyone help me? I am receiving the following error:
org.apache.jasper.JasperException: This absolute uri (http://jakarta.apache.org/taglibs/dbtags) cannot be resolved in either web.xml or the jar files deployed with this application
     at org.apache.jasper.compiler.TagLibraryInfoImpl.(TagLibraryInfoImpl.java:194)
     at org.apache.jasper.compiler.TagLibraryInfoImpl.(TagLibraryInfoImpl.java:174)
     at org.apache.jasper.compiler.JspParseEventListener.processTaglibDirective(JspParseEventListener.java:1159)
     at org.apache.jasper.compiler.JspParseEventListener.handleDirective(JspParseEventListener.java:755)
     at org.apache.jasper.compiler.DelegatingListener.handleDirective(DelegatingListener.java:121)
     at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:243)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1133)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1091)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1087)
     at org.apache.jasper.compiler.ParserController.parse(ParserController.java:213)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:210)
     at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:546)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:177)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:189)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:382)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:474)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:201)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2344)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:164)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:462)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
     at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
     at java.lang.Thread.run(Unknown Source)

to wainstead ( I saw your post at the JTL forum, who knows when the authors will be around)
I tried using the <taglib-uri> and it works for me(I am using Tomcat 4.0).
In fact I can use just http://www.man as long as it matchs what I put in the uri attribute of the taglib directive of my JSP.
But the situation is confusing because according to the Servlet2.3 specification
"taglib-uri element describes a URI relative to the location of the web.xml document,
identifing a Tag Library used in the Web Application." Perhaps someone with more experience
can explain.

I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work do I need a regular router that is hard wired to my computer? Rocket

I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work
! Do i need a regular router that is hard wired to my computer?

I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work
! Do i need a regular router that is hard wired to my computer?

MacBook (not unibody) will not boot from Boot Camp USB Key

Hello
I have a MacBook Pro 2007 (17", 2.4GHz, 4GB RAM and SSD) with a defect SuperDrive, and I want to install Windows using an USB key instead. But the computer will not boot from the USB Key, even though the USB key works on my MacBook Retina. Also I was able to install Mountain Lion using USB Key, on the MBP 2007.
Here is a bit more details:
I've installed Mountaion Lion from the same USB Key (so boot from USB works).
I've installed a Windows 7 Boot Camp using the SuperDrive before (when it was not defected)
I've partitioned the harddisk using the Boot Camp assistant (this requires a Windows DVD in the SuperDriver... however it worked just enught to be able to have OS X recognize the Windows DVD, and create the Boot Camp partition). So far so good. Installing from the SuperDriver howerver does not work.
I've created an Windows USB Key using my MacBook retina. Because the Retina does not have a DVD, the Boot Camp assistant offers the creation of a bootable Windows USB Key from an Windows ISO file. I've used this USB key to install Windows on my MacBook retina.
When I try to boot my MacBook 2007 with this Boot Camp USB Key, it shows an "EFI Boot" option (with a orange USB logo) in the MacBook boot menu. When I select this nothing happpens. The mouse freezes, and the computer never boots.
Questions:
Shouldn't I be able to boot from an EFI USB Key on this MacBook 2007, when I'm able to install Mountain Lion using a USB Key?
When I installed BootCamp using the SuperDrive, I had to do som "magic" to make it bootable. Like this: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp. I tried doing the "oscdimg -n -m -bc:\efi-dvd\boot\etfsboot.com c:\efi-dvd c:\efi-iso\win7x64.iso" trick and create a EFI bootable ISO and created the from this USB key using http://unetbootin.sourceforge.net/. Same result... the USB key shows up in the boot menu, but nothing happens when I select it (except the mouse freezes).
Any suggestions? Right now it feels like I have a bricked computer, because my kids needs Windows to run their games.
: Thomas

Thanks... I just tried rEFIt... and it almost worked.
After installing rEFIt I got several different boot options:
Bootmgr.EFI - This failed quick with a "unsupported" message
Bootx64.EFI - This actually started the Windows installation with "Loading files.............". But after a few minutes when all files was loaded, the screen went black. I tried ataching an external screen, but the screen was still black.
Boot from "Bootcamp" drive... as this drive is empty nothing happend.
Boot from "USB Key"... I'm not sure how this is different from the first 2 options... but nothing happend. I belive this is what happens if I try selecting the USB key from the build in boot manager.
Ofcause, whan I saw the "Loading files......" I thought I solved the problem, but as you can tell, I'm still stucked.
Actually... I tried with both Windows 7 64 bit, Windows 8 64 bit and Windows 8 32 bit. Only Windows 8 64 bit, got me to the "Loading files.....". This was created with the Retina Boot Camp assistant.
I also tried my own home made Windows 7 and Windows 8 ISO (created with this link: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp).
I guess my problem is another now. I'll continue my hunt... but I don't have more time right now. So I've installed Parallels and Windows 8 for my kids. Not optimal, but at least the can play their games.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

Hi,
Which operating system are you running on?
Are you upgrading from a previous version of Photoshop elements or is this your first?
Are you trying to load the organizer or the editor or do both fail?
Brian

I cannot get my ringer to work, it will only vibrate

I cannot get my ringer to work, it will only vibrate

Check the mute switch just above the volume controls. If you see a red dot, it's on mute, flip the switch.

I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works.

I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works. I am trying to get the little microphone to show up for voice messaging.

I have since fiund out that the talk to text feature is only available on devices that support Siri, iPad3, iPhone4 and later. Hope this helps someone else.

My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

Sorry, no.

I cannot get my ipad2 to work it won't let me put anything on to it and comes up with a picture of a usb cable and a music note and will not let me do anything

Similar Messages

Maybe you are looking for