I have installed Lync Basic and Office 365 2013 | Lync will not sign-in

Hello,
I have installed Lync Basic along with Office 365 and the certificates are not available.
I am an indicidual user and do not have an account through a company so I have been using my Microsoft ID. The work I do will require me to use Lync meetings with those that are on a Business Lync system. I know that their system will be a private network
but I need to create and attend Lync based meetings.
Thank you.

So do you have an Office 365 for Business Plan? Listed here:
http://office.microsoft.com/en-us/business/compare-all-office-365-for-business-plans-FX104051403.aspx
I am a bit confused because you say you are using your Microsoft ID and don't have an account through a company.
If this is the case and you don't have an actual subscription, you won't be able to sign-in. Instead if a company sends you an invite for a Lync meeting, you can use Lync Web App (that they will host at their end) and interact that way.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

After installing elements 11 and using the editor, it will not reopen

after installing elements 11 and using the editor, it will not reopen

You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

HT3728 Express will not take software upgrade. Message says to install 5.6 and when I do it will not show, says not compatible with this version of Mac. 10.8 OS-X, why not?

Unable to update airport express. When connecting msg says to install 5.6, download and will not take install says it is not compatible.

This is a dilemma. Older Express models require AirPort Utility 5.6.1 or a similar, older version of AU. Mountain Lion will refuse to install it. What to do?
As it turns out AirPort Utility 5.6.1 runs perfectly fine on Mountain Lion. If you had the foresight to have archived it somewhere (such as with Time Machine or equivalent) you can simply copy the app to your computer and use it. The problem is that the installer package will refuse to work on a Mountain Lion system.
If you don't have an already-extracted version of AU 5.6.1 there is a solution: you simply need Pacifist to extract the app from the installer package. I also found another technique described on this page:
http://frank.is/mountain-lion-and-the-old-airport-utility/
Good luck!

Lync 2013 Android will not sign in

I deployed a test Lync 2013 environment on 3 Windows 2012 R2 boxes. I have one standard server, a reserves proxy and my edge server. I have able to access my Lync environment outside my network so my edge server is working correctly. I have created certifications
using an my Active Directory Certification manger and have installed the CA on the 3 servers and also on my Android device. When I sign into the client it says "Lync is attempting to redirect you to" and lists the certification from my proxy server
so I click continue and than the screen sits on the signing in screen and just spins. I am not sure what is causing this problem or how to fix it.

Hi,
Please double check the IIS ARR setting with the help of the link below (especially for the part of Proxy and URL Rewrite):
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
Also, please double check if you set Hair Pining where the Lync external web services URL in internal DNS resolve into the external interface of the reverse Proxy.
You can refer to the following link to configure the Mobile DNS records:
https://technet.microsoft.com/en-us/library/hh690040.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Have Installed Arch Linux and Xmonad on 2013 15" MacBook Pro Retina

I just recieved the latest stunning MacBook Pro Retina 15" (ME665) released in Feb 2013, couldn't wait to install the Arch Linux 2013.02.01 on it, dual boot with Mac OSX.
I'm impressed by the performance of this device after working with the combo of Arch Linux and Xmonad for several days, everything works out of the box, including touchpad, audio, video, wireless network, bluetooth, etc. Even the apperance of most apps are compatible with the high resolution of Retina display.
Another important thing is the battery life, 5 hours! Program and compile, listen music, download AOSP through Wi-Fi, watch YouTube videos with Flash hardware accelaration on.
For the installtion details, see my long blog post at http://vec.io/posts/use-arch-linux-and- … na-display
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by vecio (2013-02-28 02:22:38)

Can you tell me what your /sys/class/backlight/gmux_backlight/brightness and max_brightness values are? This has not worked out of the box for me.

I called my apple care for support. I purchased iTunes Match and after I brought I have been waiting 12 hours and it is still in step 1 of 3 waiting to complete????? I have shut computer down and brought back up still will not complete steps

I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

I loose text of emails randomly; I have tried the properties and fix file procedure, but will not work;

I use W7 and TB 31.2; when I sign on to Comcast.net, all message text is fine; if I forward the Comcast emails that failed on TB they then come through fine on TB with all the text; Should I reload TB? Would I loose my emails?

https://discussions.apple.com/docs/DOC-6131

My iphone 4s will not sign on to watchguard xtm wireless after installing ios 6.0.1,

My 4s downloaded 6.0.1 and installed. Since then I can not sign on to my Watchguard firewall with access point. All other apple devices using older operating systems have no problem.Even if I remove security it will not sign on, any suggestions?

I have been using WPA on my devices as well. I have two iPhone 4S with iOS 6.0.1 and an iPhone 4 as well. Have you tried checking the channel you are using on the router? If it is on auto, change to a specific channel, maybe like 11? See if that will help. Make sure if you make any changes to the phone that you reboot the phone before testing it again.

(second time) Two questions - One is, Firefox will not sign me in completely and remember passweords., shown in details. Two- how to stop the loading animations

Since no one is replying, i have to try again
Deatails for number 1:
Firefox will not sign me in and remember my passwords at all. It first started on this site, New Jersey Online (NJ.com). I created an account there and Firefox will not log me in. That happened, January 3rd, 2012.
About NJ.com problem
I created an account there. Then I signed into my new account. I did get correct username and password. But the browser does not log me into the acount. I looked all around NJ.com for answer and my problem was not in the forums/blogs.
On Jan 4, 2012 - On the City Data forum I logged into my account there.
About the city data forum problem
I logged into my account there.
Firefox asked me if I want to remember this passwod, i said Yes. The box in city data forum has a remember be box I checked it.
The result means- I did not get signed in at all.
I tried multiple times, none worked.
I allowed firefox to do these things -
1. Remember browsing history for at lease one day
2. Remember download histroy.
3. Accept cookies from sites, including third party cookies, until their expiration
4. Clear the folowing when firefox closes: browsing history, download history, and form/search history.
I feel afraid this problem is gonna hsppen forever (and maybe even on this site!), and it will not sign me in to any site on the internet.
Number 2 Question
Any way to disable the loading animation in Firefox 3.6.15? it makes me forget what I was going to do. it's also shown in the addon update information. PLease help me disable the loading animation Everywhere in the Firefox browser.
For other sites with loading animations, I can use the Adblock plus element hiding helper . Just need to remove the animations by firefox
Please help me ASAP (as soon as possible), thank you!

See:
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Can't you sign in at all or aren't you signed in anymore if you revisit that website another time (next day)?
See also:
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled
*http://kb.mozillazine.org/Cookies
What do you mean with the ''loading animation''?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

SP 2010 and Office 365 C2R owssupp.dll or interceptor.dll issues

Hello,
At my company we're having compatibility issues after upgrading our
Windows 7 SP1 64-bit NL-NL laptops
to Internet Explorer 11 and Office 365 ProPlus Click-to-Run
32-bit NL-NL.
Our
initial notebook configuration had Internet Explorer 9,
Office 2007 ProPlus and Lync Basic 2013 installed.
The upgrade path exists of deleting Office 2007 and Lync Basic 2013, installing the Office 365
Click-to-Run and letting Internet Explorer update via the Windows Updates
The issues we experience happen between our
SharePoint 2010 On Premise and the SharePoint Online environment.
While we had no issues before, now, when trying to edit a document on SharePoint 2010 On Premise
we get the message: "A Microsoft SharePoint Foundation compatible application could not be found to
edit the document"
Doing some digging around online a lot of topics point to the ‘owssupp.dll’ as a possible culprit
but to no avail we tried a number of suggested solutions, listed below. Some of these solutions might propably work for the Office 2013
MSI installation but none of them seem to apply to the Click-to-Run version.
- Repair Office (Fast and Online)
- Delete and reinstall Office
- Switch in IE between 32 and 64 bit mode but this is
not possible with Internet Explorer 11
- Tried the Microsoft Hotfix KB
2726997 but got the message that it
does not apply to our system.
- Check registry references if owssupp.dll points to Office 15
- Manually re-register owssupp.dll
- Replaced owssupp.dll by the Office 2007 version
- Checked if all SharePoint add-ons in Internet Explorer were enabled
-> 'Sharepoint OpenDocuments Class' refers to interceptor.dll
not owssupp.dll
- Check/Install “Microsoft Sharepoint Foundation Support”..
Click-to-Run doesn’t
have that option
- Create registry keys in:  HKEY_CLASSES_ROOT\Installer\Components\55EAFA0B8A4403B428FDE038B252C621
What there should be: HKCR\Installer\Components\55EAFA0B8A4403B428FDE038B252C621\x86\1033
What should be added: HKCR\Installer\Components\55EAFA0B8A4403B428FDE038B252C621\x86\1043
But the 55EAFA0B8A4403B428FDE038B252C621-key
doesn't exist with the Click-to-Run version and manually creating it doesn’t help
- Put the site in the 'Intranet Zone'
- Put the site in the 'Trusted Sites' list (prodsharepoint.kindengezin.be)
         -> HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\CurrentVersion\Internet
Settings\ZoneMapKey                    -> *.kindengezin.be
(REG_SZ, Data: 1)
- Check if our SharePoint 2010 On Premis environment is completely up-to-date
- Create
C:\Program Files (x86)\Microsoft Office\Office 15\ and placed the owsupp.dll in it; in case SharePoint would be looking for it in the wrong place;        -> Keep in mind that the folder structure with Office
365 ProPlus Click-to-Run is different than the 'normal' Office 2013 as the owssupp.dll is now located in C:\Program Files\Microsoft Office 15\root\office15\owssupp.dll
- Checked if our Firewall settings are up to date (IP-ranges and other settings)
The test where I got it to
work, but is not a solution in my personal opinion is: Open the Lync Basic 2013 setup and only check
Support for Microsoft SharePoint Foundation
In your Programs and Features list you now have 2 entries: Microsoft Lync Basic 2013 Microsoft Office
365 ProPlus – nl-nl
I do not trust this “solution” as I do not know the future consequences of this “solution” in terms
of updates or functionality.

Anyone? Have OWSSUPP.DLL issues with Office15 and IE11 as well - can't get the "Connect to Outlook" menu option on SharePoint calendars to show.

How to make sure Office 365 (2013) Pro Plus click to run updates after it is installed on a computer

We are getting ready to move from Office 2010 MSI to Office 365 (2013) click to run ProPlus. Everything is ready to uninstall and install the new product.
My question is if the Updates Enabled="TRUE" is not in the configuration.xml file will machines with the click to run office 365 pull updates from the cloud? I had been told that the Enabled=TRUE is not needed in the configuration file as
it is a default setting. We want our machines to pull down updates from the cloud in place of providing a manual update location on our network.
Our configuration.xml file looks like this:
<Configuration>
    <Add SourcePath="\\Server\Share" OfficeClientEdition="32" ForceDowngrade="TRUE" >
    <Product ID="O365ProPlusRetail">
      <Language ID="en-us" />
    </Product>
    </Add>
<Display Level="NONE" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="C:\temp" />
<Property Name="AUTOACTIVATE" Value="0" FORCEAPPSHUTDOWN="TRUE" />
</Configuration>
Thanks,
Brit

I am trying more to control the process via GPO with a start-up script and have created a batch file which executes the below command. It works and installs which ever version you define in your .xml file, the only issue i am facing is that re-runs the setup
at each reboot which isn't ideal. I am currently working on below script which could check the version of the office upon boot-up and only run if the specific version is not available. I have pasted the script right at the bottom of the page and if anyone
could shed some light in making it to read the version value
"\\server\c2r\Office365 update\setup.exe" /configure "\\server\c2r\Office365 update\Customconfign.xml" (this is the batch-file used as a startup script)
PLEASE NOTE: There are three <Add SourcePath in my Cutomconfig.xml and not all three are required I use the one i need by taking the  from the beginning and the end of each line
<Configuration>
 Can only be used to download latest version of ofice365 (specify sourcepath)
<Add OfficeClientEdition="32" Version="15.0.4675.1002" > Use to download a office version direct from microsoft servers
 to deploy software from internal network resource
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath="\\server\c2r\Office365 update" />
<Display Level="FALSE" AcceptEULA="TRUE" />
<Logging Path="\\server\c2r\Office365 update\Install Logs" />
<Property Name="FORCEAPPSHUTDOWN" Value="TRUE"/> force closes any running office application

</Configuration>
this is what i am working on and wondered if any one would be able to rectify an issue with it as it doesn't seems to work
setlocal
REM *********************************************************************
REM Environment customization begins here. Modify variables below.
REM *********************************************************************
REM Set DeployServer to a network-accessible location containing the Office source files.
set DeployServer=\\server\c2r\Office365 update\
REM Set ConfigFile to the configuration file to be used for deployment (required)
set ConfigFile=\\server\c2r\Office365 update\Customconfignonskype.xml
REM Set LogLocation to a central directory to collect script log files (install log files are set in XML file).
set LogLocation=%AppData%\Local\Temp
REM *********************************************************************
REM Deployment code begins here. Do not modify anything below this line (check quotes are quotes though).
REM *********************************************************************
REM Operating system is X64. Check for Office365 version in emulated propertyBag registry key
:ARP64
Reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\15.0\ClickToRun\propertyBag /v Version=%15.0.4711.1002%
if NOT %errorlevel%==1 (goto DeployOffice) (goto End)
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
echo %date% %time% Setup started. >> %LogLocation%\%computername%.txt
start /wait %DeployServer%\setup.exe /configure %ConfigFile%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
:End
Endlocal

I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

Hi, the problem is that my IT department was sent a link on his laptop to install Illustrator, however the request was for them to build me a workstation and install it on there. they have built the workstation and is having problem installing the CC desktop app on there, just to clarify would you be able to answer the following:
1) Do you have to have CC desktop app to install Illustrator from the given link?
2) If you have signed up & installed CC on your laptop, can you install illustrator on a workstation by simply installing the CC desktop app on the workstation, log into that with your username & activate the link to install illustrator, basically the provided link should not be specific to a computer or user?
Thanks

Spinning rainbow wheel for long periods on File Open commands in Acrobat and Office 365 programs

Hardware & Software:
MacBook Pro (17-inch, Mid 2009)
77GB of free hard disk space
8GB RAM
Running OS X Yosemite (Version 10.10.2)
Over the last few days, when I try to execute a File Open command from Adobe Acrobat or Office 365 programs (even from an innocuous location such as Documents), I get the spinning rainbow wheel for long periods of time (10 seconds to minutes) before I am able to select a file to open. I copied messages from Console after a File Open command for each of Adobe Acrobat and Excel (the selected location was Documents), given below:
Excel Log Messages
2/24/15 5:50:50.970 PM     WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Excel" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:51:01.280 PM     NetAuthSysAgent[684]        AFP error -1 mapped to EIO
2/24/15 5:51:01.281 PM     NetAuthSysAgent[684]        ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:51:01.281 PM     NetAuthSysAgent[684]        AFP error -1 mapped to EIO
2/24/15 5:51:01.739 PM     WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Microsoft Excel" after 11.77 seconds (server forcibly re-enabled them after 1.00 seconds)
Adobe Acrobat Log Messages
2/24/15 5:58:22.145 PM     bird[257]        Assertion failed: ![_xpcClients containsObject:client]
2/24/15 5:58:23.454 PM     WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Acrobat" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        AFP error -1 mapped to EIO
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        AFP error -1 mapped to EIO
2/24/15 5:58:29.722 PM     WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Acrobat" after 7.27 seconds (server forcibly re-enabled them after 1.00 seconds)
Can anyone give me an idea of what these messages mean and how I can solve this problem?
If I'm not in the correct Community for this question, could someone kindly tell me where I should re-post?
Thanks.
David Walker

Yes; I have previously connected to an iMac at this location using File Sharing. However, in my attempts to solve this problem last week, I had already unchecked File Sharing in System Preferences. Tonight, I also deleted the folder from the window in the File Sharing System Preferences page, then rebooted. The problem still persists.
I try not open files across a server line, i.e., I try always to copy a file to the local computer and open it there. I may have gotten careless and tried to open a file from the Windows server with either or both Acrobat and Office 365. Although this was an SMB share, is it possible that these programs are now trying to connect to the Windows server on a File Open?
I had about decided to quit chasing this problem; we spend about two weeks every two months at this Boston location, and I'll be returning to my Florida home this weekend. So I decided I would see what the situation was when I returned to my native habitat, although I may be chasing this problem again in our trip to the Boston area in April.
The other thing I wondered (I guess I can't quite let it go), is whether there is a command line in Terminal that would kill all AFP shares.
In any case, thanks for your help; you're very knowledgeable.

Do we have to subcribe to an office 365 plan before we can use project online standalone?

hi,
do we have to subcribe to an office 365 plan before we can use project online standalone?
how can we use it after purchasing? where do we sign in?
tnx

MGerio,
Just to add on to Paul's answer, Project Online is one of the applications that runs on Office 365, so you will need Office 365 to use Project Online.
Having said that, AFAIK, the Office 365 Subscription is included in the Project Online license fee. when you go straight to the link Paul provided, and purchase licenses, you will also get Office 365 as a base.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

I have installed Lync Basic and Office 365 2013 | Lync will not sign-in

Similar Messages

Maybe you are looking for