Issue in Absence Quota generation wrt to actions (IT0000);using schema TQTA

Hi
I wanted some clarification on Absence Quota generation through schema-u201CTQTAu201D
The client Scenario is that they want Earned leaves (absence Quota type 0002 and 0003) and Half-Pay leave (Absence Quota 0004) semi-annually.
Whenever an action is run (whether with employee status active or inactive) the absence quota is generated twice:
1. Last day of previous action
2. Last day of evaluation period.
Main issue is that when it is reflected in IT-2006 it is summing up the quota generated on both the above said dates.
Also the quota that is generated on the last day of the evaluation period is not prorated but for the entire accrual period.
When the employment status of an action is inactive; the quota is generated upto the last date of previous active action, but if any other action is executed with employee status as u201Cactiveu201D in the same accrual period and time evaluation is run; the quota gets generated again on the last date of accrual period for the entire accrual period i.e. the inactive period is also taken into consideration. Moreover, both the quota generated are added up and displayed in IT-2006.
Kindly advice me the solution for the same.
Thanks and Regards
Parul Jain

Similar Messages

Absence quota generation with PCR in Time Evaluation

Dear All,
I am generation absence quota Annual leave = 50 through PT60- ZM04. Its daily calculation and transfered at the month end.
The quota entitlement is 30 days per year.
I have written this pcr. Have configured a time type too. but not sure why its not generating any quota.
The time type I have configured is:
Time Type: 0097
Save as day balance - No Formation
Save as period balance - 1
Store for time accounts - 1
Have assigned the time type 0097 in Base entitlement for Absence quota generation as Day Balance and even in generation rules.
Have placed the PCR with ACTIO Z003 before CUMBT fucntion.
The PCR Z003 is:
000010 D HRS?0
000020 *
000030 = D OUTAQTYP
000040 = **
000050 = 50 Z GCY ZQTY
PCR ZQTY is:
000010 D OUTWPMOLGA
000020 **
000030 99 HRS=FR50C ADDDB0097Z ADDDB0097 HRS=D0097
I didnt mention anywhere in configuration or PCR that its 30 days per year.
Do I need to do this?
Have I missed out anything, please help me.
Thanks & regards,
Majid

Hi,
This you can do through config also without using PCR.
Base entitlement is 30 for calender year. Selection rule- Accrual period is daily and transfer time is time evaluation period.
Use appropriate rounding rule in selection rule.
Rgds,
Lata

Absence Quota generation / Accruals

Hi Gurus,
I am trying to configure Absence Quotas with the below mentioned rules.
1. To be eligible for PTO you must be on the payroll at least 6 months at which time 20 hours of Paid Time Off is granted.
2. In the second year of employment an employee will receive 5.58 hours of PTO per pay period.
3. The accrual rate increases with continued years of service. After 5 years of employment the accrual rate is 7.11 hours per pay period. See the chart below:
Years     PTO Hours
1                  20 Hours
2 - 4            145 Hours       (5.58 hours per pay period)
5+               185 Hours       (7.11 hours per pay period)
A maximum of 240 PTO hours (6 weeks) may be accumulated.
Can you please advise if it's possible to automatically (using Time Evaluation) generate 20 hours of quota in one go after 6 months, and then after 1 year is completed, the quota accrual starts happening every pay period. If it's possible, then please advise me how can this be achieved.
Any kind of help is really appreciated.
Thanks in Advance,
Ashish Maini

Hi,
In table V_T559L you can set up to do the accrual based on a time type and using a rule, you can check based on infotype 41 when to generated it.
Regards
Frederick

Absence Quota Generation begining of Calendar Year

Hello Experts,
Although the said requirment has been already posted in SDN, could not see any solution for this from the threads.
I have a requirment to Generate Absence Quota i.e Annual Leave at the begining of the year, precisely when i run Time Evaluation on 01.01.2011 system should generate the Quota in advance for the Calenday year.
I could generate via Report RPTQTA00 but the same is not happening in TE, even i tried with all Accrual options like Calendar Year, Monthly, Payroll Period, Base Period etc but system picking only the last day of the month or year.
I am wondering if some potential solution would have released from SAP during EHP 4 and 5
Kindly help me with your expertise
thanks
Gita

Hi Vivek,
i am facing the following senio can you please provide and document with pcr. I dint find the solution in SCN so please provide solution ASAP...
I have one senario in TIme management ....
Employee have 1year probation period ,but he is entiteled for taking leave after 1 year . that to leave should be accured for calender years after probation period. & henceforth it should accur per calender year.
For Example: Employee have joined on April 2011 ,Then his leave should be accured after April2012 upto Dec 2012 & then for next year 2013 leave should accure from Jan 2013 to Dec 2013.
Please help me to map the senario with detailed configuration steps
Pls help me out here the requirement is immediate.

Error in Absences Quota Generation

Dear All,
I have generated absences quota for all the employees. But its generating and showing the same kind of absences in terms of no of days for newly joined employees also. For example if an employee joined on nov for him also Earned leave is generating for the full quota but he is not eligible for the full year of E.L.
How to reslove this.
Thanks and Regards
Suresh.V

Hello Suresh
use the tab allocation of quota based on pro-rata basis - and in quota type selection rule - use "decrese the quota based on inactive days"
and for earned leave - use different quota type selection rule - and use accrual period - for that you have to allocate the qouta on monthly basis (ie based on there presence they will get the leave quota).
Thanks and Regards
Jaydeep Jadhav

Use of Time Evaluation to generate Absence Quota

Hi,
We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
Any comments/suggestion/advise will be very helpful to us.
Thanks.
Sujit

We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
Thank you so much for the response.

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Not able to generate the absence quota WITHOUT Time Evaluation

Hi ALL,
When i try to generate the absences quota for employees without time evaluation using program RPTQTA00, I am not able to generate it.
And i am getting "E You have not selected any generation rules".
Kindly if any one come across this issue please throw some light and do a favour.
thanks all

Hi,
Pls check the follwing tables if u have made correct assignments
v_t559l
v_554s
v_556c
Check Quoma Feature
Check what status u selected in IT7
Check if ur using correct Schema
If ur Using RPTQTA00 then use No Generation,and if ur using PT60/RPTIME00 change it to Increase.
Check if u have maintained correct quota groupings.
Revert back if its not solved
Regards

Error msg in create absence quota during hiring.

Hi guys,
when i hire a new employee the create absence quota displays the following error.
"No validity interval for key 2 32 17"
i know that i need to add the new entry in the view Base Entitlement for Absence Quota Generation
(V_T559E)
my problem is that i dont know exactly what the key means
i think that is
2 is for Employee Subgroup Grouping for Time Quota Types
32 i dont have idea
17 the rule for QUOMO
any ideas?

Hi Javier,
Please check tabel V_T559D. Looks like this error was caused by no validity period setting.
2 is for employee subgroup (check table V_503_E)
32 is for personnel subareas (check table V_001P_I)
17 is for vacation quota type
Regards,
Jim

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issue while creating Absence Quota for one employee

Hi Friends,
Our customer has a weird issue. When time evaluation is run, One Absence Quota type (Leave in Bank) is not getting generated for Only One Employee.
This leave type has been updated with quota in IT 2006 after running PT60 for all other employees in the PA. The issue is only with one employee.
This absence quota is assigned "Increase" in table V_556A_B (Permit Generation of Quotas in Time Evaluation)
Can any one please suggest how to generate the missing quota for this employee. Thank you !!

Hi
Thanks for your replies !!
Please find the screenshots attached.
Leave in Bank Absence type which is valid for 2014 is missing in IT 2006 instead This absence quota valid upto 31.12.9999 is present.
Current requirement is to remove the quota which is valid upto 31.12.9999 and replace the quota which is valid upto 31.12.2014.
I have checked for some PERNRs with same EG/ESG/PA/PSA combination. They have the absence quota valid upto 31.12.2014 Only.

Time Management - Work Schedule /Absence Quota / Part-time quota generation

Hi Experts,
Need your help!
We have a requirement where we need to create distinct work schedules for each irregular / part-time work pattern and the number of work patterns we have identified is more than 1000. We are using report RPTQTA00 to generate quota. We have used work contract, employee sub-group & employee payscale group in the QUOMO feature to get the base entitlement picked up. We have defined base entitlement for the full time workschedules with 37.0 / 38.5 hours and there is a reduction rule which reduce the absence entitlement for part time employees as per the employement percentage in IT0007. Now we have a scenario where we have created a work schedule with different no of hours for each day of week (M-4, T-6, W-4, TH-6, F-4, S-OFF, SU - OFF); this work schedule is treated as full time work pattern by the system and quota is generated as full time work schedule refering to the QUOMO settings, but as per my client employees with this work schedule have reduced hours of working hours (24 hours, not 37.0 or 38.5 hours)and hence it should be treated as part-time employees, and the quota generated should be proportionately reduced. I have very limited scope to create any ESG or PSG as we do not have any distinct emplyee sub-groups maintained for full-time and part-time employees and the project has already gone-live with payroll/time. It is worth mentioning over here that we are recording absence through ESS and it takes into account the daily planned working time maintained in IT0007, so we are very particular to keep it as accurate as possible.
I would really appreciate if somebody can please suggest any possible solution for the above issue, or guide me on what would be the best way to tackle it. I can give more details in case anybody need to have a better understanding of the issue to suggest a solution.
Thanks in advance
Sujit

Hi Kathy,
Yes, i have found the solution to it. I do not know whether it will fit into your situation or not, but i got two solutions for my issue mentioned above, please check it may help:
1) To use capacity utilization field in IT0008 to get the FTE hours and defining the reduction rule of absence quota based on the capacity utilazation percentage.
2) There are three user exits available in the standard report RPTQTA00, i have used one of them to write my own rules for the calculations (deduction rule)
Do let me know if i can help you in any respect. Thanks.
Regards,
Sujit

How to change generation date of absence quota with Time Evaluation methos

Hi all,
IS there any way to change generation date when TIme Evulation generate absence quota?
Currently system will use last day of month as generation date, Validity and Duduction period set correctly.
Base entitlement relate with Monthly,
Accrual period setting in selection rule is Month
Example: system generation absence quota in PT60 with 1 day Normal Leave Entry date 31.06.2011
Valid from 01.06.2011 to 31.12.2012 ; Deduction from 01.06.2011 to 29.02.2012 (extras 2 month)
Can we change ENtry date to 28.06.2011 , because in the last day of month they did not yet have quota but they need it for advance (approver from his/her Manager) ...
Thanks,
R1V

Hi,
The best way i think is to have negative deductions for the quota.
This time as it is on 28 you want to push it to 2 days earlier and later if there is another person with a day as 25, you need to again change the generation date isnt it.
Instead, if you have the negative deductions, you need not worry about the generation date.
Hope this helps.
Cheers,
LG

Issue with PCR to restrict absence quota

Hi Experts.
i have a requirement where the absence quota should never be over 24 at any particular time.
for this absence 24 leaves per annum with 2 leaves accumulate monthly.
we are using -ve time mgt and written a PCR to restrict absence to 24 by using Time type
VARSTLDYPP
N
Y
HRS=FR55C
HRS?24
<
HRS-24
HRS*-1
HRS?2
HRS=2
ADDDBXXXX
<
ADDDBXXXX
now the issue is when i run the simulation of time evaluation it is generating 2 leaves per year instead of
2 per month. can anybody help me solve the issue
Thanks & Regards
ramayya

I need a PCR for the below scenario. I created two types to store day balance and max entitlement to 25 days.   We are not processing payroll from SAP.   Any help writing PCR with details would be appreciated.
Schema we are copying TM04
Time types - storing daily balance one for below 60 days & one for after 60 days planned working time.
Vacation per calendar year 25 days not based on seniority.
Scenario:
2.       Prorated entitlement for employees who will work fewer than 60 work days for company in a given year are calculated as follows:
a.     1/12 of annual vacation for every 21 days s/he performs work
b.    For these purposes (60 days worked rule) the following is also considered as work performance: Planned working time from IT0007 and public holidays.
c.     e.g. if hired on Nov 11, 2011, there < 60 wd remaining. They get 1/12 (25/12 = 2.1d) for every 21 work days remaining - in this case 2 periods of 21 wd, since RIM days and holidays are included as work days, for a total of 4.5 days (round up to half-day).
3.       Prorated entitlement for employees who will work 60 or more work days for RIM in a given year are calculated as follows:
a.     1/12th of annual entitlement for every calendar month of completed work
b.    E.g. If George is hired on July 15 2011, he gets 10.5 days of vacation entitlement.
c.     The number of full months George will have worked by the end of the calendar year is five u2013 Aug to Dec incl. George gets no entitlement from the 16 days from July 15 to July 31st.
5 / 12 * 25 days = 10.4 days, rounded up to 10.5 days.
Thanks,
Mani.
Edited by: saphrtime on Apr 21, 2011 5:19 PM
Edited by: saphrtime on Apr 21, 2011 5:21 PM

Absence quota prorate by monthly basis

Hi Experts,
I have an issue regarding the absence quota for the new joiner or leaver. My client wants the leave earned to be given upon completion of the month. My current configuration is base on calendar days.
For example, when a new joiner join the company at 2nd or mid of the month then the leave entitlement will be given for the following month. That mean when an employee join at 3rd or any other days in January 2010, the leave will be prorated starting from February. This same to the leaver, if the employee is leaving the company at 3rd or any other days in April, then the leave will be prorate till March. The entire April will not be take into account.
My question is how can I configure this scenario?
Appreciate the input.
Thanks

Hi,
If you are not using TE then you will can always write an ABAP program which will run and load data on the first of every month.
For Hire:
The program can check the hire date from IT 0041. If the hire date is less than the first of previous month then you can add the monthly entitlement to the absense quote in IT 2006. If it is in the middle of the previous month then you can prorate according to the formula and then add to the monthly entitlement to the absense quota in IT 2006.
For Termination:
You can base the above logic with the termination date in the IT 0041
If you maintain IT 0041 well and good or else you will have to base it on IT 0000 Actions infotype.
Hope this helps.
Ajay

Issue in Absence Quota generation wrt to actions (IT0000);using schema TQTA

Similar Messages

Maybe you are looking for