Licences and SUS

SAP Gurus,
We are already running SAP SRM 550 at SP13 with an ERP backend and a PI server.
We are considering enabling the SUS component of SRM with a view to enabling our smaller suppliers for purchase order collaboration, including e-invoicing.
In a document I have read somewhere that the optimal logon method for suppliers using SUS is to use the portal, and that the portal can be used to provide suppliers with access to BI reports for example delivery performance evaluation.
With this in mind does have any information on what the SAP licensing requirements are for suppliers using the SRM SUS application?
Thanks in advance
Allen Brooks
SRM BPO
Sunderland City Council

Hi allen
Please contact him for SUS supports /Queries as mentioned in the SAP Note 700350
Dr. Dirk Schirrmeister
SAP Consulting Deutschland
PU Purchasing Solutions/ SRM
SAP Deutschland AG & Co. KG
Hasso-Plattner-Ring 7
69190 Walldorf
E-mail: dirk.schirrmeister at sap.com
SAP Note 700350 - Supplier Enablement: Deployment
Scenarios integrating SUS
https://service.sap.com/~sapidb/012003146900000197132008E/ECS_SUS_Consulting_Solution.zip
br
muthu

Similar Messages

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi,
first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them - the links I would use: http://helpx.adobe.com/support.html and http://helpx.adobe.com/contact.html.
Hans-Günter

Adobe AIR on RedHat and SUSE Linux

Hi,
I am trying to install AIR 2.5 runtime on RedHat Linux and SUSE Linux . When I try to do it on RedHat, I get the following error:
error while loading shared libraries: libpangocairo-1.0.so.0: cannot open shared object file: No such file or directory
Can anyone help me fix it. I assume I will get something on the same lines on SUSE as well? Also, has anyone successfully done what I am trying to do? I can see that Adobe AIR page doesn't mention RHEL and SUSE (but openSUSE) supported, but still.
Thank you!
-Amit

The only version that works on RHEL 5 is 2.0.4. Check this thread for more details:
http://www.cherpec.com/2010/12/adobe-air-2-5-1-glibc_2-7-error/
It works as I tested on RHEL 5. But to ship AIR heelp to customers, this is for sure not a solution.

Business Scenario on EBP,ROS and SUS

Hi friends
can any one send me a business scenario document so that EBP, ROS and SUS exist
Please mail to vinaykrishna007 at gmail
Regards
Krishna

Hi Krishna,
I have mailed you a document on Supplier Registration scenario. This will give you a faire idea on the business process.
Regards,
Prashant
Pls reward points if you find this info useful.

Can I buy a Lightroom upgrade (from LR3) with a perpetual licence and a student discount? If so, which page do I need? Thanks.

I am trying to buy a Lightroom upgrade (from LR3) with a perpetual licence and with a student discount.
If I go the student discount route on the web U get taken to the 'cloud' options which I don't want.
Any help would be appreciated.
Thanks.
PS Is the upgrade worth it in any case??

I believe there are NO upgrades for Student and Teacher editions but you can see here: Products
If the price is the same as an ordinary upgrade you are probably better off buying that because it can be upgraded in the future.

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

SRM, ROS and SUS scenario question

Hello Experts,
We are in the process of implementing MDM, ROS, EBP and SUS scenario in our present project. I went through the documentation. I have couple of questions.
1. Do we need to have seperate clients for ROS and SUS. What is the best practise.
2. Since we have SUS, once I transfer BP from ROS to EBP, check the portal vendor box, I would like to know how the registration code will be sent to supplier. Do we need to create the userid in EBP or with the receipt of registration code supplier will be able to create his first initial userid? Also how we can implement this with CUA and EP as part of landscape?
3. Also since we have MDM, how the new BP information can be migrated or mapped in MDM and how new BP can be sent to backend system? I understand there is BP monitor to check and approve the changes, but how the new BP will be transferred? Do we need to develop new XI message for this? if Yes, from where that can be managed? from EBP or MDM?.
I searched through help.sap.com for any documentation but no success.
Thanks in advance
Vijay.

Hi,
1.Refer the foll thread:
Re: Supplier Registration without SUS or XI?
2.For supplier registration,SUS is not mandatory.You need to configure ROS for this scenario.The extrenal vendors will register in ROS and then be replicated to R/3.
You can use EBP only for Supplier registration.
SUS,ROS and Bidding engine make up the SRM server 5.5/EBP component of SRM 5.0.
Pls refer the foll link for the complete process:
http://www50.sap.com/businessmaps/8F152C1AE8F1426FA3B442F905815F54.htm
For detailed settings/config of supplier registration,refer the foll threads:
Re: Not able to transfer suppliers from ROS to EBP
problems with ROS_PRESCREEN application for screen suppliers and manage bp
Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
Supplier Directory
Re: Supplier Self registration
Re: SRM Supplier registration config
Re: External Web Service setting for Supplier Registration ROS to EBP
Re: Problems when transferring supplier from ROS to EBP...
3.Not worked on MDM so cant help you on this.
BR,
Disha.
Do reward points for useful answer

Archiving SRM EBP and SUS Data at End of Contract Period

Hi Team,
We are implementation SRM EBP and SUS solution to one of our Customer.
Below is our Landscape Details
SRM 7.01 SP09
Portal 7.3
SP08
MDM 7.1 SP07
We have deployed all the application in our Data Center and customer have signed a 5 contract to use the solution. At the end
of the 5 years, if the customer wants to move to other solution, they the want the master and all SRM related datas to be archived and copied in
a media, where they can retain for 7 years.
Please confirm how this can be achived the SRM solution
Regards
Ponnusamy

Hi Experts,
Can you please help.
At the end of contract, period, if customer wants to migrate data from SAP SRM to some other SRM system, how it can be achieved.
Regards
Ponnusamy

EBP and SUS in same client

Hi,
If we habve EBP and SUS in same client do we need XI for connecting the two systems.
Thanks,
Manu

sap OPTIONS TO OUR CUSTOMERS
1. EBP and SUS on the same server but different clients
2.EBP and SUS on different server
3 EBP and SUS in one client: not recommended, only for test systems
THANKS
MUTHU

XI onfiguration in EBP and SUS systems

Hi!
I am configuring XI in EBP and SUS systems to be able to send POs from EBP to SUS and to get PO responses from SUS to EBP. Also we would like to have ASN creation in SUS funtionality to create inbound deliveries in ERP system, because we are running ECS.
I have created HTTP (type H) RFC to XI system (XI_INTEGRATIONSERVER) and also configure integration engine via transaction sxmb_adm. But when I try to test RFC connection to XI system I always get the following error message:
ICM_HTTP_CONNECTION_FAILED
Could you please help me to fix this issue?
Thanks and Regards,
Siarhei

do you also see any other message along with this?
like HTTP 401? or something like that?
and also make sure that the user --> you sepcify on the logon&security tab is correct.
and this user should be available on the XI system -->and should have role ---> SAP_XI_APPL_SERV_USER
Edited by: khan voyalpad usman on Apr 9, 2008 9:59 PM

Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof

I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivas

was trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas

Connection problem in Linux systems: redhat and suse

I install Sun Java System Application Server Platform Edition 9.0 in RedHat and SuSE linux in my intranet with wondows XP.
The servers run correctly in both RedHat and SuSE systems. That means in each system, I can use: http://localhost:8080 or their ip address to access the servers, for example, http://192.168.0.5:8080.
However, in the windowsXP computers, I cannot access the servers running in both Linux systems by using their ip address (for example, http://192.168.0.5:8080). In addition, in RedHat, I cannot access the application server running in SuSE and vice versa.
The network works correctly as I can use SSH to log in both RedHat and SuSE linux by using their ip address.
And in both RedHat and SuSE, I can access the application server running in windows XP computer.
I thought the problem came from the configuration of the linux. But I donot how to solve it.
Could anyone give me some suggestions?
Thanks a lot.
Kevin

iliasver wrote:
Hello. I have huge problem with my blackberry z10 device. I bought my device six months ago from Greece which mostly I live there and they told me that this device is unlocked. I used my device with most of all three mobile networks in Greece and it works just perfect. Now that I am in Canada fro work and I must stay a lot, my device does not work on any mobile network of Canada. Specifically I'm at manitoba province and I have not find yet some a one to help me about my problems. Every mobile network I test does not work properly. From the most of them they tell me that my device does not use the frequency band that use north American, and some of them tells me that my device is not fully unlocked. Is that possible? My device have fully unlocked, medium unlocked and fully locked systems? Does anybody knows what to do to fix it? And how you figure this out that my device is locked or unlocked, cause every single video I saw it seems to me that my device is unlocked. Thanks and hope someone to give an answer to my problem.
Can't be used, wrong frequency. Canada, North America and half of South America use GSM 850 / 1900 MHz.
Rest of the world use GSM 900 / 1800 MHz.

Can any one tell me the exact procedure of how to update XPERIA NEO V to ICS using both PC companion and SUS.

Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.

SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update

WGM and SUS issues/questions

Hi all
I have set up a server that is currently running DNS, OD, AFP and SUS. I have a bunch of users set up in WGM but only one (the testing one) bound.
Firstly my bound account "STEVE" has - A user account in WGM which is also in a Group account in WGM. I assume as the computer has been bound (or binded!) to the OD this is why the computer has an Hardware UUID account in WGM this also resides in a computer group called All Computers.
Now Preferences in WGM only works if edited in the computer panel of WGM (with the UUID in) I can for example move my dock. How ever if I have no preferences (WGM) set of the computer and try to move the dock under Computer Groups (WGM) of which the computer is a member, then the dock don't move. It also won't move if I set (WGM) Prefs in users or user groups only.
This not a major issue as we only have 15 clients but setting pref for User groups or Computer groups would be better.
The main issue is SUS the SUS server is running on the server and has downloaded loads of updates. I can set the update server for the client (again only in computers in WGM) with the following server to use:
http://server.mydomain.com:8088/index-leopard-snowleopard.merged-1.suscatalog
Again setting in Computer groups would be better. However when I run software update on the client I get the following:
The Software Update Server (server.mydomain.com) is not responding.
Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.
It gives you the option to run network diagnostics which say everything is fine.
Any ideas
SUS is one of the things I'd really love to get going as our internet connection is quite slow.
Cheers
Steve

Hi all
I have set up a server that is currently running DNS, OD, AFP and SUS. I have a bunch of users set up in WGM but only one (the testing one) bound.
Firstly my bound account "STEVE" has - A user account in WGM which is also in a Group account in WGM. I assume as the computer has been bound (or binded!) to the OD this is why the computer has an Hardware UUID account in WGM this also resides in a computer group called All Computers.
Now Preferences in WGM only works if edited in the computer panel of WGM (with the UUID in) I can for example move my dock. How ever if I have no preferences (WGM) set of the computer and try to move the dock under Computer Groups (WGM) of which the computer is a member, then the dock don't move. It also won't move if I set (WGM) Prefs in users or user groups only.
This not a major issue as we only have 15 clients but setting pref for User groups or Computer groups would be better.
The main issue is SUS the SUS server is running on the server and has downloaded loads of updates. I can set the update server for the client (again only in computers in WGM) with the following server to use:
http://server.mydomain.com:8088/index-leopard-snowleopard.merged-1.suscatalog
Again setting in Computer groups would be better. However when I run software update on the client I get the following:
The Software Update Server (server.mydomain.com) is not responding.
Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.
It gives you the option to run network diagnostics which say everything is fine.
Any ideas
SUS is one of the things I'd really love to get going as our internet connection is quite slow.
Cheers
Steve

Licences and SUS

Similar Messages

Maybe you are looking for