LIMS data of inspection type 89 to be uploaded in SAP QM

How to upload the LIMS data into SAP. These data are for for different material. And each material have different batch. A lot of batch is their. Inspection type is 89. How to upload the data batch wise????

Check with your LIMS vendor. Must LIMS vendor provide the routines required to interface with SAP.
There is no straight forward answer to what you are asking. Interfacing a LIMS has a lot a of moving parts to it. It's best to work with your vendor.
FF

Similar Messages

Error in QM Data(Inspection types)

Hi
i want all inspection types for all materials...
n i want to display materials that are not having inspection types...
i WANT BELOW OUTPUT.
Eg: MATNR- WERKS- ART
      10002-1120- 01
                         02
                         03
      10003-1130
I have Written this below Query'
My Problem is im not getting all Inspection types for material it is displaying only one inspection type
Can anybody help me on this?
SELECT MATNR
         WERKS
    FROM MARC
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
    WHERE MATNR IN S_MATNR.
    IF IT_FINAL[] IS NOT INITIAL.
      SELECT ART
             MATNR
             WERKS
        FROM QMAT
        INTO CORRESPONDING FIELDS OF TABLE IT_QMAT
        FOR ALL ENTRIES IN IT_FINAL
        WHERE MATNR = IT_FINAL-MATNR
        AND WERKS = IT_FINAL-WERKS.
    ENDIF.

Hi,
Try like below code
Select * from <DB> into <ITAB> wherr <Inspection Type> EQ ' '.
Regards
Md.MahaboobKhan

Inspection type's maintained in the material master

Hello,
I want to know the transaction code using which I can check the inspection type's maintained in the material master.
I do not want to go per material put in mass. I know that I can pull the data from tables but i do not want that.
I want the standard SAP transaction code.
Regards,
Narendra Bora

Well, you could make the argument that using SQVI to create a query and making this report available to select users is not really development. It is a standard SAP transaction and users can be limited to only running certain queries. Groups of queries can be created and users assigned to groups. By adding variants that users can't modify and locking certain fields in the variant you can limit the queries to a maximum number of records. Usually the argument is that a user will create a massive query or set values that return too many values. Both of these concerns can be addressed.
I don't think a lot of people understand the full capabilities of SQVI. You don't have to give users unlimited access to the transaction!
If there was a "standard" report or transaction for what you want, I think between Sujit, and myself, we would be aware of it. It is a common requirement during go lives to have to review inspection type setups. I would hope by now we would have run across it.
FF

Inspection lot with inspection type 03 - Using Inspection plan

Dear friends,
I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
Is it possible?
Best Regards,
Avinash

Hi Swapnali,
Was expecting this re-question.
We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
But still system is picking the routing and not inspection plan. Is there a way out?
Regards,
Avinash

Problem in bdc for adding another inspection type in mm01

Hi,
i had made a code in which it will maintain the quality view and there it will going to insert twi insoection type ZSTAGE and 03 . Te problem is when it uploads the value of 1 inspection type it works fine but when it is going to insert another insoection type i.e. 03 it again picks up the zstage .
plzz provide me guidlines how to solve this problem that both of the inspection type should be inserted.
here's d link for the code:-
http://docs.google.com/Doc?id=dfxswwff_1p9zdnnf2
Edited by: ricx .s on Apr 20, 2009 8:48 AM

ur code looking ok..
just change it..
call function <b>'WS_UPLOAD'</b>--->to <b>gui_upload</b>
EXPORTING
FILENAME = p_fl_mct
FILETYPE = 'ASC'
TABLES
data_tab = Tmp_tab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
OTHERS = 10.
if sy-subrc <> 0.
message e398(00) with 'Unable to upload data'.
endif.

Inspection type 03 - PP/PI not creating auto inspection lot

Hello Experts,
I've read the Best Practices for PP and QM master data, as well as the BPs for Creating and Completing inspection lots.
I have 03 activated for my inspection type usage.
When the PO is released, I am not seeing an auto inspection lot.
Please suggest the troubleshooting steps to solve this issue. Some are auto creating and some are not, but my QM MData is correct for inspections...
Thanks
Verroz

Hi Craig,
I guess 'Insp. Char. required' in control key flagged or not, does not affect Inspection lot creation.
I just checked for existing 03 inspection lots and we do not have this field flagged.
My understanding is also based on F1 help which states
In the following situations, consistency check for the task list generates a warning message:
if you set the indicator in the control key but have not maintained
inspection characteristics for the operation or phase
if you have not set the indicator in the control key but have maintained
inspection characteristics for the operation or phase
Or have I missed something here?
Amol.

Temporary bypass of auto assignment of Inspection type

I have checked 'auto assignment' in QM master data view. My goods receipts are generating inspection lots with 01 inspection type. This is all good. Is it possible to trick the system not to assign the inspection type in certain cases even though 'auto assignment ' is setup ? If this is possible I would like to use this to model an ad-hoc first article inspection as required by my client.

Hello FF,
I tested your suggestion of creaing multiple plans and tricking system not to assign any inspection plan. It worked. I have multiple inspection plans for Prelim series( say 501 usage) and one '01' for normal incoming quality inspection. When a Vendor calls the buyer and cautions that next shipment has some process changes/tool changes/new raw material introdcued etc., some at Client site has to modify the QIR to put in Prelim status. At the time of GR, system gets confused on which 501 plan to assign and leaves the assignment open in the insp. lot. Then manually QI inspector has to assign the plan knowing the vendor's caution. Again, Gagesh question of how change being communicated is not anwered here. But I may propose an enhancement in the PO screen( a check box may be) that buyer puts in after receiving communication from Vendor. This flag may run a program to put the QIR status to Prelim status. Lets see how it goes. My question is answered. Thanks to you all for inciteful help. Points goes to FF for the 'Idea'.

Inspection type 0101 steps

HI QM Guru.
i m doing 0101 inspection type.i m doing this steps. first i maintained 0101 inspection type and controle key in material master.
then i maintain QI01
then created PO. after PO released i do QI07. but when i excute the qi07 does not excute..
show the massage
A source inspection for the selection criteria is not possible
Message no. QB150
Diagnosis
Incoming inspections are not possible due to the master data definition.In order to be able to perform incoming inspections, a Q info record must be present and an appropriate inspection type must be entered for the incoming inspection.
.kindly sugesst me what to do...
i m doing 1st time 0101 inspection type..kindly plz guide step by step for 0101
Regards
aqueel

Hi,
It's self evident from the message that, you have to maintain Quality Information Record.
Pl. refer the link below:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/3519d8448c11d189420000e829fbbd/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/350dff448c11d189420000e829fbbd/frameset.htm
http://www.sap-img.com/quality/how-to-do-source-inspection-in-qm.htm
Madhava
Edited by: Madhava K.N on Jan 29, 2010 11:53 AM

Inspection type 03 and QM order

Dear
1.I am not able to assign QM order QL01 by t code QK01 to my finished product to which in material master is activated for inspection type 03
in material master's inspection set up data QM order text box is missing
Pls help me to solve this issue
2.For a single material is it possible to assign different order type for example QL01 for Appraisal cost and QN01 for Non confirmation cost
Thnks in advance
Faisal

1.I am not able to assign QM order QL01 by t code QK01 to my finished product to which in material master is activated for inspection type 03
>In SAP standard the activities for the inspection type '03' are allocated into production order.
>Therefore you cannot assign any QM order to inspection type '03'.
2.For a single material is it possible to assign different order type for example QL01 for Appraisal cost and QN01 for Non confirmation cost
>You don't need to assign the order type 'QN01' into material master.
>The order 'QN01' is assigned to a quality notificaion manually or by configuration.
>QCC0 > Quality Notifications > Notification Processing > Define Costing Parameters > Account Assignment for QM Orders
>Also check SAP help portal.
>http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351c93448c11d189420000e829fbbd/content.htm
Regards
Luke

QM Inspection Type for SD Delivery in Returned Goods

hi experts,
Any ideas on how to do stock postings in Iinspection Lots that are automatically created upon return delivery
I want to post to inspection stock once the Delivery has been completed. The standard SAP automatic Inspection Lot that is created does not allow us to post to stock. pl. help
thanks in advance.
vinay

Hi Vinay,
Follow the below Customer Return procedure.
Case1.
The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspectoin type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
follow this path.
tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here.
I think in your case it will be 651.
change it to 655 and try now.
hope it will work.
revert further clarification
Regards,
S.Babusingh

QM Inspection type 03

Hi
Can any body please let me know how to make an insepction type 03 stock relevant ?
Regards
Sankar N

Hi Sankar,
Not possible dear. 03 is strictly Stock ir-relevant inspection type. The reason according to me is, it is in process inspection type for the material that is under process of mfg. so at this time you will not have the stock of your product/semi finish product physically as well. So there should not be an issue of stock, hence it is id not in existence.
But as soon as you confirms the final confirmation of the order, you will have the stock of the same, so here the functionality of 04 inspection type is available. That you can use very well.
Further in addition to my argument, you have the Operation confirmation functionality available with the 03 inspection lot operation confirmation, I am talking about the yield confirmation. And the quantity you confirm at here in QM, the PP guy will not able to confirm more than it.
That is possible with FS-SS relation ship between two phases the task list. Again I will say these are not standards but you can develop them using the user exists..
- CONFPI04 to carry out your own inspections (after carrying out SAP inspections)
You can use this customer enhancement to carry out checks on the
confirmation after the SAP checks have been carried out. The
confirmation can be changed depending on the user entries.
The following are copied to the interface: the operation in the order
(AFVGD), the complete order header (CAUFVD) and the confirmation
(AFRUD). The confirmation is copied from the customer enhancement to the
SAP standard program.
- CONFPI05 to update your own data after saving the confirmation
You can use this customer enhancement to update your own data after
saving the confirmation. The confirmation cannot be changed.
In this customer enhancement it is strictly forbidden to send error
messages or other messages because otherwise there is the danger that
data will be inconsistent. SAP cannot be held responsible for this!!
The following are copied to the interface: a table with all the
confirmations (AFRUD) created in this transaction and a table with the
corresponding order headers (CAUFVD).
Regards,
Shyamal
Edited by: Shyamal Joshi on Jul 29, 2008 10:44 AM

QM-inspection type

Dear all
i have assign 2 inspection types 05 and 08 for a raw material.now please guide me when lot 'll be triggered by 08 type and when with 05.
because i have a con fusion that when we make stock transfer by a movement type then inspection lot 'll be created with 05 as it is for other goods movement so please explain the difference in b/w these two types.

>
Kundan Kumar wrote:
> Hi,
>
> Inspection Type 05: Inspection for other goods receipt.
> Inspection Type 08:Stock transfer inspection.
>
> 08: Whenever stock transfer takes place between two
> plant or two storage location. System will generate a inspection. lot for this.
>
> 05. Whenever we make good receipt for a material (Which is not against PO, Scheduling agreement, All kind of PO ).In that case also system generates a inspection lot
>
> Consider goods receipt for a cost center...is a type of others receipt.
>
> Thanks & Regards
> Kundan Kumar
I think this explanation is quit fare to understand.
Inspection type 08 you can use for the stock transfer good movement ony, it can be inter plant,material,
While activate QM for inspection type 05 & activate QM for some other movement type, that are not part of Purchase Order,Stock transfer etc i.e. miscellaneous GR.
Else the best way is prepare test data and check yourself.
Regards,
Shyamal

Inspection type for customer return of returnable package material

Hi Guys,
I send the returnable package to the customer , while reciving that material to my stock (when the customer return to me ) i want to create outbound delivery with out order refference .
I want system to create inspection lot after doing PGR of the outbound delivery .
The inspection lot sould have the option of result recording and stock posting when i do usage decission
This requirement not met by inspection type 06 , i want to create new inspection type to met above mentioned all requirement .
please provide the steps to be performed to met the same.
Thanks and regards
Thamizhchelvan G

Hi,
The 06 - Inspection type is not stock relevant and also it is not possible to change because it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Movement type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with movement type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspection type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
Follow this path.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data, check which movement type is assigned here.
I think in your case it will be 651.
Change it to 655 and try now.
hope it will work.
Thanks
Vinay

Multiple notification against single inspection lot (03 inspection type)

Dear friends
While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification. if any body knows please tell me.
Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
not working (i think it will work only serial number,equipment and functional location get changed)
Please do the needful
Regards

Hi Karthikeyan
As you mentioned it is not possible to create notification other than based on the object types.
A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
Defect can be recorded in the item level by the user.
Sounds difficult but certainly possible
Regards
gajesh

Inspection Lot for inspection type 09_ Vendor field is blank

Hi,
Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
I need this field updated. Please guide me what to do for this.
Thnaks & Regards
Kundan kumar

HI Ashok,
I checked in material batch data( msc3n) vendor details is there.
Please update me more in this regard
Thanks & Regards
Kundan kumar

LIMS data of inspection type 89 to be uploaded in SAP QM

Similar Messages

Maybe you are looking for