MBAM 2.5 Reports

Hi,
I recently deployed MBAM 2.5 on Friday and it's all working fine. Tried to check the compliance reports today on Tuesday (Enough time for it to technically update) and they are empty saying no data is available. I had a look around and previous versions
of MBAM created a SQL server job called "UpdateCache" but that job doesn't exist and neither does the stored procedure that that job referenced in previous versions.
I'm guessing chances are the name or stored procedure has changed but I can't see anything in relation to the stored procedures relating to the MBAM compliance database actually relate to updating of the reports.
Any ideas?
Thanks
Anthony

that job is not there is MBAM 2.5 so its fine. If you don't see any errors on client side, can you check if deploymenttime key is present. more info here: http://blogs.technet.com/b/deploymentguys/archive/2012/02/20/using-mbam-to-start-bitlocker-encryption-in-a-task-sequence.aspx
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

Similar Messages

MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCL

You may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet

MBAM clients not report device users

Hi all,
I have installed MBAM 2.5 infrastructure with some mbam clients on laptops.
My problem is that mbam clients (ver. 2.5.0244.0) don’t report the information about device users to MBAM Recovery and Hardware DB, but one client (ver. 2.1.0117.0) does it.
Any ideas on how to fix?
Regards,
Alex

can you confirm if the group policies are flowing down to the affected machines? (regedit
HKLM\SOFTWARE\Policies\Microsoft\FVE )
older version of MBAM clients will report to the newer version of the MBAM IIS server.
Also see if URLs when posted on IE does asks for a prompt.
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

MBAM Enterprise Compliance Report not updating

I've had MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the
Enterprise Compliance Report. Is there a refresh cycle for this report and a way to get it to go quicker? I am not seeing any computers yet and figured i should see them by now and am not sure where to look for issues for this part only.
Thank you for any help

I had to uninstall and reinstall MBAM and now everything works except the enterprise compliance report and when I try to run the
clearcache job in SQL I get an error . There are no steps defined in the clearcache job , its just empty
How can I fix this clearcache job?
thx
I have the same problem. Could anyone show us the steps so we can recreate it?
Update on the problem,
I found another forum post about the same problem and how to recreate it, But I couldnt get it to work. Please try it and see if it works for you.
http://social.technet.microsoft.com/Forums/da-DK/w7itprosecurity/thread/d481451c-1acd-4722-a53b-6b5632975a87
"run selection in the reportingdb.sql"

Certain MBAM agents not reporting compliance status

I have MBAM setup in a two computer configuration topology both servers running Windows Server 2008 R2.
The problem I have is that certain clients are not reporting back their compliance status to the MBAM servers and when I check the log files for these clients the MBAM Operational logs shows "The MBAM
policies were applied successfully." This event appears regularly within the 90min windows as expected which is fine.
When I check the MBAM Admin log files had absolutely no new entries since January this year so something is definitely not right. On working clients both the Admin and Operational logs should be updated at least once every 90min that's how it was configured
in GPO.
All clients are running version 1.0.2 of the MBAM agent on Windows 7 Enterprise SP1. The problem has to be client side because there are machines reporting back regularly with no problem on the same network.

Hi,
Please take a check to see if the following KB could help here:
MBAM Enterprise Reporting Not Getting Updated
Besides, questions related MBAM, please consider ask in the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=mdopmbam
Experts there might share some insights for the issue here.
Best regards
Michael Shao
TechNet Community Support

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

MBAM 2.5 Reports Fail with "Invalid object name 'v_GS_MBAM_POLICY'."

Utilizing the SSRS Reports for MBAM 2.5 Integrated into Configuration Manager 2012 R2 Cu3, when I run the reports it states that the view
'v_GS_MBAM_POLICY' does not exist.
The complexing thing though is that there are computers that are reporting the HINV Class called 'Win32Reg_MBAMPolicy' So I would think this view would have been created.
Does anyone know the process by which the view gets generated since my HINV is reporting back the information, yet the view has not been created in the DB yet... It makes no sense.
The error is:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'ComplianceDetails'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Invalid object name 'v_GS_MBAM_POLICY'.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
David Baur

We ran into this error as well. Turns out that MBAM-provided reports to SCCM 2012 fail with an error unless the Win32Reg_MBAMPolicy class is added to SCCM, which also updates the SCCM SQL with required Views, including "v_GS_MBAM_POLICY".
The solution that we finally came up with was to import an updated MOF file to include the BitLocker Policy (Win32Reg_MBAMPolicy) class into the "Hardware Inventory" section of the Default Client Policy. Once the import is complete SQL also gets
the appropriate view created.
The instructions on how to create and import the MOF file can be found in the link below.
http://technet.microsoft.com/en-US/library/dn237295.aspx
Chris Keene
Product Specialist at Wave.

MBAM with SCCM Reporting Question

My company has SCCM 2012 R2 deployed with a CAS and 5 primary sites. If we install MBAM with SCCM integration on all the primary site servers, will the MBAM reports be limited to the primary site, or will there be reports at the CAS level that cover
all of our primary sites?

Ken,
In the 'About MBAM 2.0 SP1' article, in the 'What's new in MBAM 2.0 SP1' section under the heading 'Ability to install MBAM on a primary site server when you install MBAM with Configuration
Manager' it talks about the previous requirement to install MBAM on a central site server. Additionally, under the sub-heading 'System Center 2012 Configuration Manager', it states that you can install MBAM on a primary site server or on a central administration
server...
Hope this helps,
David
MDOP on the Springboard Series on TechNet

Prompted for credentials when running the Recovery Audit Report on MBAM Help Desk web portal

I am prompted for my credentials when I try to run the Recovery Audit Report on MBAM Help Desk web portal. I am a member of the MBAM Read Only Reports group which I specified during the web portal configuration wizard. I would like to suppress
the prompt for credentials.

Add the URL to the Local Intranet sites did not work. The Help desk web portal is on port 8088 and it does not allow you to specify the port when you add the URL to the Local Intranet sites. I am able to access the Reports page from the
Help Desk web portal when I open a browser on the IIS server, but the Reports page does not open without a prompt when I open a browser on a client. Strange.

Unable to install MBAM 2.5 with SCCM integration on named SQL instance

Hi,
in production i am installing MBAM 2.5 with SCCM integration but during the installation it asks for the SCCM reporting services point and which it is unable to recognize.
whereas in my lab environment i have default SQL instance which has reporting installed, in that case it works fine.
can someone let me know why the issue is coming?
in the event log the issue is : Description = "user domain\username is not able to get the lock at this time.Error:0x40480732"

For the integration part, You need to install the MBAM SCCM Integration feature on SCCM server. For compliance reporting in integration, MBAM uses the Reporting service point for SCCM.
When installing the SCCM integration feature, you need to provide the name of the reporting Server where Reporting Service point role is installed for SCCM. But it does not provides any option for the instance but for the Server only. We have two instances
for SQL. One for CAS and other for Primary site. We need to run the installer on CAS and hence need to connect to the SQL instance for CAS.
We have also tried with the powershell commands but it is not working either.
Is there any way to install MBAM integration feature on a SQL instance. As far as I know, it automatically picks the instance but not happening for me.
Gaurav Ranjan

Error: the 'MBAM Policy' view does not exist.

MBAM 2.0 SP1 with SCCM 2012 integration:
I am receiving this error when the reports are run from the reporting services point and from inside of the SCCM console. The view that the reports are testing for does exist in the SCCM database. I do not understand why the reports are giving this error.
Each of these MBAM reports have a test for the view V_GS_MABM_POLICY :
    DECLARE @query nvarchar(70)
          SET @query = N'SELECT COUNT(EncodedComputerName0) AS Status FROM V_GS_MBAM_POLICY'
    BEGIN TRY
      EXEC(@query)
    END TRY
    BEGIN CATCH
      SELECT 0 AS Status
    END CATCH
If the Try fails then you receive the above error message in Red Font.
This view - V_GS_MBAM_POLICY does exist so I am not sure why this is occurring. I have completely redone the MBAM setup on the SCCM 2012 server after removing all the MBAM collection and reports, etc. following the instructions from this article -
http://support.microsoft.com/kb/2831166 I also removed the classes. I ran the setup again - just the SCCM integration feature and it gives me the same results. Some have suggested that the inventory has
to be collected by the clients first before these reports work and that doesn't appear to be the case. This red font error message is only shown if the view is not reachable. Anyone have any ideas?

I was mistaken, the view is queried for a count and if 0, it displays that error message. So it may be correct that this is normal until the first clients return data that populates the MBAM/Bitlocker tables.

Missing Machines within MBAM Console

Our MBAM Console Enterprise Report is not showing all of the machines that we know to have the MBAM client installed on (about 1000 short). I have reviewed the SQL Jobs on the MBAM server and the job histories show success. How does a machine show up it
the console? I'm trying to figure out what else I can troubleshoot before I open a case with Microsoft.
Thanks!

Asset inventory can show all machines (including non-tpm machines).
As Lance suggested, check one machine which is not in the list and check the report.
If it is not listed, that means mbam client cannot talk to mbam server.
There might be some issues only in reporting component.
Reduce the statusreporting frequency from GPO to 90 mins and see if the number increases in Enterprise Compliance reports.
Also check this:
2620269 MBAM Enterprise Reporting Not Getting Updated
http://support.microsoft.com/kb/2620269
Manoj Sehgal

MBAM 2.5 SSRS SSL Error

Greetings,
I am in the process of building MBAM 2.5 and have encountered a critical stopping point when setting up the Reports feature for SSRS. The following specifics relate to my infrastructure:
- MBAM 2.5 Standalone on Windows 2012 R2 Standard
- SQL 2012 SP1 Enterprise (default instance) on a 2 node cluster using Windows 2012 R2 Standard
- Third party wildcard SSL server certificate installed on both Windows servers
- SSRS is installed in native mode using the default instance
- SSRS web service URL is bound to the certificate on port 443 and port 80 is disabled
The issue appears during the installation of the MBAM Reports feature. I receive confirmation that all prerequisites have been met but after inputting the configuration information on the next screen, the following error appears:
"Unable to connect to the Reporting Services web service. Error message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
The event viewer logs 2 event ID 800 errors:
Log Name: Microsoft-Windows-MBAM-Server/Admin
Source: Microsoft-Windows-MBAM-Setup
Date: 5/15/2014 1:40:47 PM
Event ID: 800
Task Category: Server Setup Library
Level: Error
Keywords: MBAM Configurator,MBAM Powershell Cmdlets,MBAM Report Setup
User: [xxx]
Computer: [xxx]
Description:
Report provider unexpected error.
Description:
A web error occurred while checking the SSRS URL.
Exception:
System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices.ReportService2005.ReportingService2005.GetPermissions(String Item)
at Microsoft.Mbam.Setup.Common.Reports.ReportsPrerequisitesManager.GetWebServiceUrlForInstance(String instanceName)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-MBAM-Setup" Guid="[...]" />
<EventID>800</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000092</Keywords>
<TimeCreated SystemTime="2014-05-15T17:40:47.756875200Z" />
<EventRecordID>19</EventRecordID>
<Correlation />
<Execution ProcessID="3040" ThreadID="2564" />
<Channel>Microsoft-Windows-MBAM-Server/Admin</Channel>
<Computer>[xxx]</Computer>
<Security UserID="[xxx]" />
</System>
<EventData>
<Data Name="Message">A web error occurred while checking the SSRS URL.</Data>
<Data Name="StackTrace">System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices.ReportService2005.ReportingService2005.GetPermissions(String Item)
at Microsoft.Mbam.Setup.Common.Reports.ReportsPrerequisitesManager.GetWebServiceUrlForInstance(String instanceName)</Data>
</EventData>
</Event>
I have verified the certificate using Internet Explorer and visiting the SSRS URI. Each certificate in the chain comes back as OK so I'm unsure why the error reports "the remote certificate is invalid according to the validation procedure".
Any guidance on resolving this error would be greatly appreciated so that I can proceed with this project. Thanks,
Som

Hi Mark,
I ended up finding an answer (and should have posted it here). The steps on
this page were what got the problem resolved. I'm fuzzy on why the "strong wildcard" (+) character worked with some resources and not others, but changing the ssl binding to the actual fqdn helped for me.
Pay special attention to michael12345's response at the bottom of the page. Once I did the following
2. Delete the reservations with:
netsh http delete urlacl url=https://+:443/ReportServer/
netsh http delete urlacl url=https://+:443/Reports/
3. Create new ones with:
netsh http add urlacl url=https://mydomain.com:443/ReportServer user=MYSERVER\MyAccout
netsh http add urlacl url=https://mydomain.com:443/Reports user=MYSERVER\MyAccout
Here is an additional resource regarding the strong wildcard character.
Good luck!

MBAM 2.5 Web Applications installation - "Web service application pool account is not valid"

Hi,
I've created a Server 2012R2 installation to install MBAM 2.5. When installing the Web Applications I keep getting "The web service application pool account is not valid".
The account I am using is a standard domain account with admin rights on the Server and I've also set the SPN (both netbios and FQDN) and Delegation.
This account is also a member of the group that is defined as RW of the SQL databases (which were setup without any problem and are on a separate Server 2008R2, SQL 2008R2 installation.
I am also getting an error with the SSRS URL , stating "SQL Server Reporting Services URL that points to the MBAM reports is not valid", despite being able to browse to the http://[FQDN]/ReportServer_MBAM location.
Thanks.

I got this kind of error when I revert back my virtual machine a lot to my previous checkpoints. I hope this can't be an issue for you.
Make sure the application pool account must have the following login roles on the SQL server and have following rights on the reporting instance:-
Required SQL Server permissions
The user responsible for installing MBAM database and reporting feature must have the local administrator privileges and the following log in permission:-
SQL Server instance login server roles:
dbcreator
processadmin
SQL Server Reporting Services instance rights:
Create Folder
Publish Reports
SQL Server Database Engine Services: SQL Server Database Engine Services must be installed and running during MBAM Server installation.
SQL Server Reporting Services (SSRS): SSRS must be installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in "SharePoint" mode.
Gaurav Ranjan

MBAM 2.5 - Remote SSRS instance

Trying to install the MBAM Databases and Reports feature on the same SQL instance. The SQL box has other production database instances and I'm not able to install the MBAM bits on the server.
I installed the MBAM bits on the server that will be hosting the administration console and was able to install the databases on the remote production SQL box. However I'm not able to install the Reports feature remotely as the pre-req checker is looking
for the SSRS instance locally. I tried using the Enable-MBAMReports cmdlet, but keeps failing that it's missing the pre-req.
Is there any other way to install the Reports feature remotely without installing the MBAM bits on the SQL server?

Not sure if this is possible as the MBAM Setup only copies the bits to the Server and from there you start the Feature Setup. I think you have to install the bits on the Server you want to install the required features.
/Oliver

MBAM 2.5 Reports

Similar Messages

Maybe you are looking for