Multi-Monitor Workspaces

Should there be an improvement on how Flash handles multiple-monitor systems?
I mean i made my own workspace which stretches the flash window vertically over 2 screens, but when you leave computer, screen saver will break the workspace to one screen which needs manual stretching again since selecting the workspace I created doesn't even resize the Flash window.

netfun81 wrote:wow, nice wm. Install was a breeze, love having floating layout on one screen and tiling on another. In the past, for certain apps that wouldn't play well with a tiling wm, I would have to kill X, change my .xinitrc to start openbox and startx again. This seems like the perfect solution.
Thanks :-)
netfun81 wrote:Does "go get github.com/BurntSushi/wingo" always pull the latest from git? Can i just delete the wingo executable from go/bin and run command to upgrade to latest or do I need to delete config files each time to remain compatible?
Yes, `go get ...` always pulls from the latest git. I make sure that Wingo builds before pushing to `master`. I'll use a different branch for any longer term experiments.
You could use `wingo-git` in the AUR, but `go get` is just as good. (Indeed, the PKGBUILD uses `go get`!)
One note those, use this to update to instead:
go get -u github.com/BurntSushi/wingo
go get -u github.com/BurntSushi/wingo/wingo-cmd
You shouldn't have to delete any executables.
As far as configuration files go... I'm not sure. I haven't figured out how I'm going to handle them yet. I don't think any well-formed configuration file will break Wingo, but it's certainly possible that old configuration files will miss out on new features/options. (For example, I just added some new focus follows mouse options.) Wingo will always maintain an in-memory default configuration, so missing configuration options will also never break Wingo.
You can always check out the new configuration files by running `wingo --write-config`. You'll have to move `~/.config/wingo` to a temporary location first though.
If you're installing from the AUR, I'll try to add post installation messages for any big changes.
FYI, I should say that installation is so easy because of Go. :-) /plug
Last edited by BurntSushi (2012-10-26 21:07:44)

Similar Messages

Any 3rd party utilities that fix full screen mode for multi-monitor users?

I am a multi-monitor user. As multi-monitor users know, full screen mode is basically useless since if you try to go full screen on one monitor, it causes the other monitor to go blank and become unusable (at least with most programs). Are there any 3rd party utitilities or fixes for this?
Thanks

Spaces, which is what this functionality stems from, was limited in that it used your entire setup and switched all of the screens over; space to space. I never used spaces because I always had multiple monitors and I was always working with multiple apps simultaneously that I wanted to be able to reference while working on the others.
Now they call Spaces, "mission control" and changed the appearance of it, but the functionality remained the same, each workstation comprised all of your monitors, and would switch over all of them when switching to a new "Desktop".
Fullscreen apps wrongly assumes that it can take the functionality of the afformentioned MS/Spaces and use it for one app, negating the whole idea of why someone would have multiple screens (real estate to work with other applications).
If they stop considering multiple monitors as one Workspace, they can then make it so they are asynchronous "tablets" instead of one conjoined entity.
So, you say people have been asking about this for 2 years, I've been asking for this for 5!
The issue here is, the only answer is to not use it. Making Mission Control and Fullscreen apps completely ignored by people like us, where I could be using both functions to glide around my work station and three monitors, mixing and matching which apps I want to be viewed on each separate monitor, to perform one single task; together.
It would actually reward people who wanted to utilize Thunderbolt technology and have more then one monitor.
There is no telling why apple chose to push out something that would only support the casual user, with one display, but the only direct way to let apple know that we feel limited by the OS is to send feedback. Even though it seems that we are powerless in this situation, I hope that they do consider how to make this function better.
</rant>

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Can you WIRELESSLY connect a macbook pro to a monitor to have extra work space on a separate screen from your macbook? (not mirror, extra monitor/workspace)

Can you WIRELESSLY connect a macbook pro to a monitor to have extra work space on a separate screen from your macbook? (not mirror, extra monitor/workspace)
It needs to be wireless.
I am not asking about mirroring, but as a second screen.
Apple tv communties said the Apple tv cannot do this, but maybe another type device can?

My thunderbolt port stopped working on my late 2011 MacBook Pro rendering my external monitor useless--or so I thought.
Mac Genius suggested using the Apple TV via AirPlay Display as a $100 solution. Took me all of 6 minutes to figure this out as there are no directions in the Apple TV box supporting this. But, it does work and I am now back in business.
PS. Don't set up with bluetooth--seems logical but you want to use AirPlay Display under Settings > Displays.
Also, I originally thought my external monitor stopped working because I upgraded the OS. This time, it was definitely a hardware issue and not software. It also fixed a known sound issue my monitor had with Macs. First time in my 15 years I've ever had a ViewSonic have issues with an Apple product, too. Thanfully, it is now fixed.
Hope this helps.
Late 2011 MacBook Pro
Maverick
ViewSonic external monitor

Creating dual monitor workspace

I found one ancient message from September with absolutely no responses, so let's try again.....
Bridge CS4. Dual monitors. HOW do I create and SAVE a workspace that takes advantage of both monitors? I want to put previews and some palettes on one monitor, and the rest on the other. But, I don't seem to be able to save the whole thing so it's the default setup.
How do I do this?

I don't believe you can. I do think the save workspaces feature is that
smart or goes that far. At least when I have tried creating a dual monitor
workspace and save it, it never comes up like a created it. I think what the
problem is that when you create that secondary window for the other monitor
it isn't just a window created by the main application but a second light
copy of Bridge loaded in to memory so when you close bridge that is lost.
This has been an issue since they added workspace capabilities to Bridge.
It certainly would be nice if this worked however.
Robert

Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Multi monitor cursor swapping

I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty well. So do you guys know a corresponding software or script for mac or is it possible to run the win. app in OS X via 3rd party software?
/Erik

Is the question clear or should I rephrase it?
I need a keyommand to move the cursor from one screen to another.

Multi monitor on xp partition

I'm having a problem with setting multi-monitor for the xp side partition. I use xp most of the time and having problem with the multi screen.
please help
thanks guys

i got it working finally

Multi Monitor - different Screeen Saver for different monitor - Setting for notebook computers...

Hi,
I have a question about the multi monitor, screen saver setting for Windows 7. I'd like to know 2 questions.
1.) if I can set different screen saver settings on different monitors
2.) If I can do it, can I work on the external (or non-primay) monitor, when I have the primary monitor with "blank" screen saver?
Basically, I put my notebook computer at the docking station at work, and the docking station is connected to a 22" monitor, desktop keyboard and mouse. So, at work, the 22" monitor and K/B would be my primary use. However, I still "flip"
open the notebook monitor for dual monitor use.
I'd like to "save" the notebook monitor when I don't use it for 30 min. or so... I'd like to "power" it off or set it so that it would only turn on if I move my mouse to that screen.
Is there a way to do it?
Thanks

Hi
There isn't any way to do what you are describing.
The reason is that both monitors have the same source for the video. You can extend the video to the second monitor, but this just gives you more screen space.
The screen saver will only display on the monitor that is set as the default and when the screen saver starts, the other monitor will be blank.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

Multi-monitor SW is affecting VMware performance on Helix

I have discovered that running multi-monitor software like Matrix desktop management is affecting the VMware Workstation 10 guest performance so drastically that virtual machines become literally unusable. Similar experience is reported by other people using different multi-monitor software like DisplayFusion, see https://communities.vmware.com/message/2315099#2315099
ThinkPad W520, i7-2820 CPU, 32GB RAM, NVidia Quadro 2000M 2GB GPU , mSATA Samsung Evo 840 1TB + 2x Samsung SSD EVO 840 1TB & Lenovo Helix i7 8GB RAM & ThinkPad W540, i7-4800MQ, 32 GB RAM, NVidia Quadro K1100M, OS on M.2 2242 Transcend MTS400 256GB + 2x Samsung SSD EVO 840 1TB

Ray, it will do a lot more good if you file an official bug report at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Be sure to describe the configuration in extreme detail.
Peter

ATI card + OS driver + multi monitor

Hello everyone,
I'm stuck configuring the RadeonHD drivers for multi monitor setup. The system starts with both screens cloned; logging in is in clone mode too. After that the second display is being turned of (no signal). Using xrandr --auto will enable the second display to life and clones the sreen again. xrandr --output DVI-I_1/analog --left-of DVI-I_2/analog will create a big desktop only the second display can only be used for a half screen mouse will go further anything else will not.
I've started with a autogenerated, by xorg, xorg.conf file and tweaked to the one below
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
DisplaySize 1440 900
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
DisplaySize 1680 1050
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-I_1/analog" "AL1916W"
Option "monitor-DVI-I_2/analog" "AL2016W"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
# Monitor "AL1916W"
SubSection "Display"
Depth 24
# Virtual 3840 1920
EndSubSection
EndSection
My Xorg.0.log shows the line (WW) RADEONHD(0): Option "monitor-DVI_I_2/analog" is not used wich puzzles me!
Information:
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
xrandr program version 1.3.2
Server reports RandR version 1.3
xf86-video-radeonhd 1.3.0-1
If more information, from Xorg.0.log or anywhere else, is needed just ask....
Thanks in advance,
Arjan Gelderblom
Last edited by Bloged (2009-12-14 10:02:05)

Sorry for the delay, but I was away for the weekend!
Andrwe wrote:Please try setting the bigger one monitor right-of the small one.
xrandr --output DVI-I_2/analog --right-of DVI-I_1/analog
This doens't change much except that now the smaller monitor has the problems!
litemotiv wrote:try using xf86-video-ati instead of radeonhd. i tried to get xrandr working for over a week having exactly the same problem, ultimately switched drivers and had everything set up in ~10 minutes.
Changed to ati instead of the radeonhd drivers still gives the same error!
Eratosthenes wrote:
I think you need to set a valid virtual size in your xorg. I think the one you have commented out is too large.
Mine is:
Subsection "Display"
Virtual 3200 1200
EndSubsection
Changed see new xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-1" "AL1916W"
Option "monitor-DVI-0" "AL2016W"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "AL1916W"
SubSection "Display"
Depth 24
Virtual 3120 1050
EndSubSection
EndSection
Andrwe wrote:BTW could you please sent teh log, maybe there is something you may have missed.
Because of the switch to ati from radeon the log is different now... but here it is: http://pastebin.com/m77d0ea0b
This one at least shows that my seccond monitor is connected which failed in radeonhd!
Thanks for all the help,
Arjan Gelderblom
Edit: changed topic title to have it apply better to it's content
Last edited by Bloged (2009-12-14 10:02:47)

Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here. You can see the thread relating to this post here
http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
The problem: The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used. As in it reverts to the standard small white non-inverted, no trails,
no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem. Judging by my own and other peoples experience it seems to happen mainly with multi
monitor setups where different screen resolutions are used. The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%). <o:p></o:p>
If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional. Also bizarrely when the scaling is set to 100% if the screen is recorded
using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it. Here is a link to a video where I explain and show the problem
happening on my system. http://youtu.be/xs2cxoeaq-A<o:p></o:p>
I have every update installed without exception, latest drivers etc. I use a 55" 4k screen with 2x1080p monitors in portrait on either side. All are connected through 1 Nvidia
GTX 780 6GB graphics card<o:p></o:p>
Hope you can help us<o:p></o:p>
thanks<o:p></o:p>
Jon M<o:p></o:p>

Hi Jon,
I'm looking into this issue but it will take me some time to provide a reply.
In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
Also please try to change the screen resolution to a lower size and see if issue persists.
Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution.
If you have any feedback on our support, please send to [email protected]

Get the current active monitor handle in multi monitor environment

Hi,
I have a requirement to get the HMONITOR handle of the active monitor in multi monitor environment.
i.e; Get the HMONITOR of the currently selected monitor
Thanks in advance

Hi Chris Lewis,
Thanks for quick reply.
I'm referring to the monitor, where a window is invoked
I want to identify from which monitor, my window was invoked, so that I can create and show the window in that monitor.
I had already tried using MonitorFromWindow(). But it always give primary monitor handle.
My Code:
HMONITOR hMonitor = ::MonitorFromWindow(myMainFrame->GetSafeHwnd(), MONITOR_DEFAULTTONEAREST);
hMonitor always refers to Primary monitor, though window is invoked from Secondary monitor.
Thanks in advance

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

Multi-monitor application switching bug in Windows 8.1

In the latest 8.1 update, we got some better features here and there, but using metro apps seem to break multi-monitor setups.
In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
There's no one way to reproduce this bug, sometimes it happens and sometimes it doesn't, but it usually starts to happen when switching from a metro app to the desktop on the main display via the top-left hotcorner.
This may also happen in many other circumstances involving metro apps or the hotcorners or anything like that. I have not had a problem involving the start screen so far. Getting rid of it (temporarily) is just as finicky as reproducing the issue. I really
have no idea what makes it go away, but switching back and forth between apps using different methods (hotcorners, taskbar, metro minimize/close buttons) seems to get rid of it until you interact with apps again.
I have an AMD r9 280x and 2 1080p displays. I am not using eyefinity. I am running Win 8.1 Pro updated to the latest 8.1 update where there are metro apps on the taskbar.
Needless to say, this is very annoying. If I can't smoothly move my mouse cursor between screens, it really interferes with a dual/multi screen setup. With all the people with multiple screens, I'd expect more people to have run across this problem, so if
you need more information to identify whether this is a software/OS issue, let me know.

In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
That's not a bug. It's a feature. Unfortunately there is no GUI support for it. And evidently there needs to be a training dialog, in the same way that there is one for Flicks. Search for "Escape Velocity"...
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/issue-with-dual-monitors-after-windows-81-update/30431433-32a7-48e7-853e-f6f391f5fa3e?msgId=2139704d-c2d2-44e6-b466-452769e7fdbf
That's strange. They called it Escape speed? Implying direction doesn't matter? <eg>
Robert Aldwinckle

Multi-Monitor Workspaces

Similar Messages

Maybe you are looking for