Multiple Assets

My client wishes to create individual assets for al Material components, whose value is over $1000.  Settling to multiple assets will not work, because the Asset values should be exactly equal to the PO amount.  Creating WBS elements for each one of these materials is not feasible, since there are over 100K components.  My initial thought process was to create a new Acct  assignment category which will post to a an Asset account, and collect cost in a statistical internal order.  This means that I would have write some thing custom to get the total project cost.
I would appreciate if you can suggest a more elegant way of handling this requirement.

There was a simpler solution, which just didn't strike me.  I guess I can handle it by assigning the Asset costs to a Statistical WBS element inside the same project, which will help in commitments and budgeting too.  This saves me the need to create a custom report.

Similar Messages

  • Multiple asset numbers in Single PR/ PO line item

    Hello,
    If we enter multiple Asset Numbers in single PR/ PO line item then we get following error message while doing GR  -
    ' Entry 7100000256 00001  not in table XACCOUNTING (system error) '
    Message no. M7000
    For this PO, in account assignment we have selected 'Distribution' as 'Distribution on quantity basis' and 'Partial Inv' as 'Distribute to following row'
    In case of procurement of materials like chair, we are procuring few hundred materials and for each chair we are creating one asset number.
    Please help to resolve.
    Regards,
    Milind Dumbre
    Edited by: Milind Dumbre on Feb 2, 2011 3:24 PM

    Hello,
    Check these  SAP notes 1386249, 1550451 is relevant for you. These  notes are applicable for your system. these notes are non industry specific.
    You can try these note , i think your problem may get resolve.
    Regards
    Mahesh Naik

  • Multiple Assets in a Purchase Order

    Hi All
    If a line item has been created in a purchase order with a multiple asset number, when i want to goods receipt the same order how do i make sure that the system allow me to receipt the specific asset number.
    Regards

    Hi,
    System will not distrubute any qty or amount during GR as well as system will not generate any accounting document also after GR in the case of multiple account assignment.
    System will distrubute the quantity and value during IR based on the option you selected during the creation of PO. As well as system will generate accounting document during IR.
    Regards
    Karthick

  • ABUMN using multiple assets

    Hi experts,
    I am trying to process transaction ABUMN for about 100 assets.  When I click on the multiple assets button, only six lines appear.  The clipboard functionality does not appear to work.  The clipboard icon is greyed out.
    Does anyone know how to make the clipboard function work for this transaction so that I can cut and past all 100 assets in the transaction?  Or is there a better way to do this?
    Thanks.

    Hi Karen,
    I did the testing and what i understand that we need to paste 6 assets enter and scroll down paste another six assets and like that you need to post all assets.
    Then simulate it, you can see all asset values at a time.
    Still if you get any issues, pl let me know.
    Regards,
    Venkata Raju

  • ME2K - Multiple Asset selection

    Hi All,
    I need a report of Purchase order value (Total Value of P.O) based on Asset number.
    When I run ME2k I get a breakdown of line item values.
    But I need the total value of the P.O. currently system is displaying the net price of line item.  I know I can download to excel and manipulate the report to give me the total.
    I have 100 assets and each assets contains more than 200 line items. So it will be a time consuming process.
    But in ME2K initial screen, Multiple selection of Asset is not possible.
    I also tried with structures/tables to get report.But it went in vain.
    Is there any possibilites to get the purchase order values(total value) for multiple assets???
    Thanks in advance for your help.
    Regards
    Senthil Kumar

    Hi All,
    Thank you very much for prompt and quick reply.
    your reply is very userful for me.
    I still have problem in calculating the P.O total. If I have selected total and sub total value.
    but system is calculating only the net price. For ex. in a P.O there are 3 line items and net price for each line time is 100 and quantity in each line item is 3. Now the total value of the P.O is 3 ( quantity) X 3 ( line item) X 100 ( net price) = 900. But currently system is showing 300. Its not calculating as per the quantity of the P.O.
    Any other way is there?
    Regards
    Senthil

  • RE: Multiple asset posting with different dates

    Hello can we post and transfer multiple asset codes with different posting dates to different asset in one single transaction i have use ABUMN with multiple selection but it is not provide to use different posting date for different asset codes.
    Regards
    Abhisekh Mandal

    ABUMN is supporting multiple assets but not multiple dates.  Post twice with two different dates.
    Srinivas

  • Multiple Assets transfer in ABUMN

    Hi All,
    I need to transfer 1 asset to multiple assets (eg 20 assets equally) within same comapany code. I tried thru T code ABUMN by choosing option "multiple assets".
    There, under "From asset" i gave the same asset number 2 times, one below the other and in "To assets" I gave 2 different assets. When i hit enter, the second line item gets deleted, making 1 asset transfer to 1 asset.
    Could anyone let me know whether its possible to transfer 1 asset to multiple assets in ABUMN or any other way.
    Thanks,
    Ameet

    Hi,
    This can be done through ABUMN only, but not ata time. for example:
    You have to post 3 transactions individually to that old asset.
    For the first ABUMN transaction choode partial transfer and choose amount specification.
    For the second ABUMN transaction choode partial transfer and choose amount specification.
    For the last ABUMN transaction choose Complete retiremnet. (So the balancewill be transfered to the third new asset)
    Please check.
    JK

  • Transferring from one asset to multiple assets

    Dear SAPians
    How can we transfer from one asset to more than one assets. Can we do it thru ABUMN or there's any other way?
    Regards
    Zain

    Hi Dominic,
    Thanks for your reply.
    I have tried ABUMN. I am entering into the transaction ABUMN and specifiying transaction data (posting and asset value dates). Then I am pressing the "Multiple assets" button after which a List option is available.
    I am entering the amount or percentage in partial tranfer tab.
    Then I am entering asset numbers in 'from asset' and 'to asset' fields like:
    From asset 300000001 to 300000005
    From asset 300000001 to 300000007
    When I am pressing enter, it accepts only one entry from above specified list.
    That means it allows only one to one asset transfer not one to many. Is there any other setting or way to do asset tranfer from one asset to multiple assets?
    regards
    Zain

  • Multiple assets depreciation using T.Code ABAA

    Hi Gurus
    Using the T.code ABAA, we can depreciate one asset at a time. one of my user wants to depreciate multiple assets using this t.code to reduce the his process time. is it possible? if it is possible how we can do it.
    Please suggest

    Hi Behnhard
    thanks for the reply
    could u please explain the step by step process how to record using SHDB as it will help me to understand and explain to my user.
    < Don't use SMS Language. Read forum rules. Thread locked. >

  • Tranfser assets with transaction ABUMN to multiple assets

    Hello,
    When executing the transaction ABUMN to transfer assets within a company code, there is a button"multiple assets". In the normal functionality, when only transfering one asset, it is possible to create a new asset. Is it also possible to transfer multiple assets to multiple new assets?
    I hope this clearly describes the problem, if not, please ask.
    Thanks in advance.
    Hans

    Hi,
    In SAP one can transfer multiple assets to multiple Assets though while transferring multiple assets to multiple assets SAP does not provide the facility to create a new asset as one can do while transferring from one asset to another
    Thanks
    Ankur

  • Transfer 1 asset to multiple assets

    I'm looking for the functionality to transfer 1 asset to multiple assets in one in one transaction.  In transaction code ABUMN, there is a "multiple asset" functionality but it cannot be used to transfer 1 asset to multiple assets.  SAP will give an error message "You want to post a retirement to asset XXXXX. This is not possible, since a retirement was already posted to this asset in the current document."  Is there another transaction code to accomplish this or SAP don't provide this functionality?
    Thanks

    write your own program with bdc (shdb)
    basis could be a simple excel-worksheet like
    old_bukrs old_anln1 old_anln2 new_bukrs new_anln1 sub-asset  part
    1000        4711        0             1001         1000                          50 %
    1000        4711        0             1001         1000          X              25 %
    1000        4711        0             1001         1000          X              15 %  
    1000        4711        0             1001         1001                          10 %  
    1000        4712        0             1001         1002                          50 %  
    1000        4712        0             1002         1002                          50 %  
    load this from csv into internal table
    and loop this table to fill trx. abumn
    A.

  • How to enable MUltiple asset tab in T.code ABT1N

    Hi,
    We need to transfer assets from company 1 to company 2 and we are using the T.code ABT1n for this is intercompany transfer.
    1.I want to know how to enable the Multiple assets tab in T.code ABT1N
    2.Then when I transfer of 1 asset  with( NO REVENUE) I am receiving an error that DATA INCONSISTENCY: NO REVENUE ENTERED.
    3.Third point is when I Transfer of 1 asset (WITH REVENU) I get the following error like ACCOUNT CLEAR>REVENUE SALE TO AFFILIATED COMPANY COULD NOTBE FOUND>
    Can someone who is expert in this area can help me out.
    Thanks in advance

    I wonder as well if you found out an answer?
    Best regards, Johanna

  • Creation of Multiple assets

    Hello,
    I'm creating assets using BAPI BAPI_FIXEDASSET_CREATE1
    Even i have to create Multiple assets.
    could u please tel me which BAPI u used to create multiple assets.
    Thanks,
    Shabari Raut

    Hi
    I did not have such experience earlier but sure your workaround is perfect. Goahead.  Transaction code ABUMN is mainly for such transfers and/or asset class adjustments
    Cheers
    Srinivas

  • Scenario of multiple Asset from one AUC/WBS

    Hello,
    I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
    I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
    Is there any other way to handle this scenario?
    Thanks
    Sarang

    Hello Virendra,
    I am not using Investment Managemnt. What do you mean by IM profile?
    I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
    So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
    Thanks
    Sarang

  • Checkout Multiple Assets

    Does anyone know if it is possible to checkout multiple assets at once? The second I select more than one asset, the checkout button goes gray.
    Thanks.

    This is current limitation of FCSvr 1.1.1

Maybe you are looking for

  • Ipod not recognized by any MAC computer

    I have a 20gb IPOD 2nd generation which has worked fine until recent itunes and tiger software upgrade. Now Finder nor utilities (ipod updater) nor itunes will recognize the ipod when connected with firewire-- even in disc mode. Ipod is not recognize

  • Exporting events has left me distorted

    Hi can someone help me please, I had a new WDcloud which unfortunately due to network issues I can't back up over the ethernet, my problem is that I am manually exporting my iphoto events to the WDcloud which is great except the photos left in the ev

  • Sum in internal table issue

    Dear Experts, I have a Qty field which needs to be summed up when material no, po no and size are same in my internal table Eg: PO no     Mat no     Size      Qty       111          001          L          10       111          001          L        

  • How to set  an object in request scope in  a jsp uysing  jstl

    I usally use scriptlet in jsp to set an object in request is there a way to do this using jstl instead of this <%request.setAttribute("test",myObject);%> I want to use tag ?

  • Role Mapper and Authorizer

    At one point I posted a forum entry and posted a solution for my entry regarding keeping the app deployments around while recreating/overwriting the domain using WLST offline. Keep App Deployments while recreating the domain in WLST offline Things se