Navigation Profiles

I created a new navigation profile for MD04 for purchasing in the Develpoment client. I want to move it to QA and PRD but the normal transport method is not working. Can anyone give me step-by-step instructions on how to create the transport for this Profile. I have read some documentation in the SAP Library but I don't think it is referring to this type of navigation profile. Any assistance is appreciated.
Thank you.

Hi,
Thanks, but note 1341099 is in no way connected to the question.
Hi Vivek,
Yes I could only manage the transaction call. No specific reason as such, other than it is what users have got use to in the previous version. You know what happens when something changes!.
Anyway, thanks for the advice.

Similar Messages

Navigation Profile in Purchasing Reports / MM

Dear Experts ,
Pls tell me if there is navigation profile in MM reports . I have seen the same in PP reports but couldnt find the same functionality in MM .
Rgds

Hi
Navigation path or profile ?
Path : Sap menu- Logistics- Material management- Purchsaing- Purchase order-Reporting
Pls check
Regards,
raman

Stock overview using navigation profile in MD04

Hi,
after excuting MD04 when i using the navigation profile for the first time to view the the stock , its show all the stock batches. In between when i view the any one of the batch in MSC3n and while again excuting the MD04 and viewing stock views in navigation profile, its show the last viewed batch stock only.

thanks for your input.
i checked the same it copy the last batch on the MMBE. If there is any option to remove the last batch entry in mmbe.
regards,
Ramanathan
Edited by: Ramanathan.KS on Feb 10, 2012 12:20 PM

Assigning Navigation Profile to all users

Hello,
We have changed the transations in the Navigation Profile SAPPPMRP00 and we are trying to figure out a way to assign that Navigation Profile to all users so that they don't have to assign the navigation profile individually.
Is there a parameter ID that we can assign to all users that would assign them this Navigation Profile? Is there some other user attribute that we can assign to give them this Navigation Profile?
Thanks for any help,
Dale Dingmann

Hi,
According to my knowledge there is parameter ID to fulfill your requirement. You can create a new parameter ID. Please follow below link.For better clarity you please post the thread in SAP-SECURITY forum. I hope this will help you.
http://www.wcupa.edu/_INFORMATION/AFA/SAP/Reqs_ParameterID.pdf

Import of Navigation Profile of COOIS

Hello Masters,
I have created Navigation Profile under COOIS in client where order data is available as explained under example heading at "http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/c04942da51690de10000000a155106/frameset.htm".
As mentioned in above link, I tried import option in customising client via the transaction "NAVP_MANAGE" as well as through COOIS. In transaction "NAVP_MANAGE", I didn't get any value for import and in COOIS there was no list generation as there was no data in system.
So, the problem is as I was unable to import Navigation Profile into customising client from client with appication data (both clients are in same system), I can't move forward to include this into transport request.
Any input on import or transportation of Navigation Profile will be be helpful.
Thank you in anticipation.
Best regards,
Devang

You might be using the program name as PPIO_ENTRY but SAP doesn't store navigation profile for that program because it has different type of navigation profiles for different type of report executions like Order Header, Component list, Item list, Operation list.
The Navigation profiles are stored in table NAVP_PROFILE use SE16N to look up it's entries, there you can see all the navigation profiles (for all the programs, both user specific and global). User specific profiles have username in username field.
For example if you have created navi profile for COHV/COOIS Order headers then the program name would be PPIOH000; Order components would be PPIOM000 etc...
Use them program names in TCode: NAVP_MANAGE

MD04 Navigation profile

I have created a navigation profile but when i jump from MD04 to this new screen i am getting an error message "specify atleast one restricted parameter" and it jumps back to MD04 right away. Then i selected the check box "With initial screen" under general transaction calls in config so now i can jump from MD04 to this new screen but just on the initial selection screen, I am trying to jump to the result screen and not on the selection screen . Any help be great!

Hi
you define navigation profiles for the MRP list and the stock/requirements list. Navigation profiles enable you to navigate faster and more flexibly between transactions. For each profile, you define:
a record of generall transaction calls
a record of specific transaction calls for each MRP element required
Each user can assign a navigation profile in the respective list, under the menu path Environment --> Navigation profile --> Assign or under Settings. The system then offers transactions suitable for the users work, without the user having to define the jumps.
After saving, the general transaction calls appear under the menu path Environment --> Navigation profile, and in the application toolbar. The transaction calls per MRP element appear in the application toolbar for the detail dialog box.
In detail, you define:
the number of the transaction call
if applicable, the indicator for the MRP element (only for transaction calls per MRP element)
the transaction code
if applicable, the icons
the icon text, menu text, information text
the parameters, which enable you to skip the initial screen of the transaction
the conditions, which must be given, for the transaction call to be offered (only for general transaction calls)
the application component: operational and/or long-term planning
The number of transaction calls possible is not limited. However, in the MRP list and the stock/requirements list, only the following are displayed:
the first five general transaction calls that are valid in the given context,
the first two transaction calls per MRP element that are valid in the given context.
The determining factors for the selection are the conditions entered, the application component, and the respective navigation number.
hope it will clear to you
Regards
Anupam Sharma

Navigation Profile for COOIS

Can someone tell me how we can create a Navigation profile for COOIS report?

Hi Sneha,
Go to the T. code COOIS enter the initial selection parameter then you will get the details of production order header screen in this detail screen you check the arrow type icon, this icon is form Nevegation profile select the change profile. Then select the row application tool bar. Here you will get the '+' sign like icon select the CALL TRANSACTION.
I think this will help you.
With Best Regads

Navigation Profile

Dear Experts ,
We are in a process of upgradation from ECC 5.0 to ECC 6.0 .May i get some details of the steps .And may i know in detail about the navigation profile used in Tcode COOIS.
Regards
W>A

Hi Waseem
Check this link may be useful
https://www.sdn.sap.com/irj/scn/forums
Best Regards,
Syf

Regarding navigation profile

what is differnce between logical links ,work centre links,direct links group, work center link group???which is used when???

Keep this in mind as you're learning the system. The Navigation Bar configuration can be daunting at first.
For me, I first came to realize that all links on the Navigation Bar are logical links. A logical link is required to access anything from the Navigation bar, whether it is a standard component, transaction launcher, etc.
Then, Direct link groups and Work Center link groups are nothing more than ways to "group" logical links and then assign them to the navigation bar so they can be accessed.
For example, In your navigation bar, you must assign Work Centers so you can see first level navigation menu items.
A work center can have a logical link itself, and does not require a work center link group (there is no second level menu items). However, if you want second level navigation, you need to assign a work center link group to the work center.
The work center link group is a "grouping" of related logical links (can have one or more).
So in essense, all you really have are logical links. Direct link groups and work center link groups are the method used to group and assign logical links to the navigation bar.
Hope that helps.

ECC6.0 t-code COOIS - how to get the "Profile" select-option list

Hi PP Gurus
We are implementing ECC6.0
We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
My question is regarding standard transaction COOIS.
I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
There are only the following items (select-option screen of COOIS in ECC6.0):
-LIST
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
-LIST
-PROFILE
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
Questions:
1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
What I have already explored:
u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
THANK YOU.

Hi,
The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
The navigation profile is adjacent to the icon called Environment (its a drop down list).
Revert if you face any issues.
Regards,
Vivek

CRM 5.0 - IC - Navigation Bar

Hi Gurus
I've added Shortcut Keys to my Navigation Bar Profile ID's but they're not displaying at all. This should be any easy one but cannot resolve.
Many Thanks in advance.
Panduranga

Hi Pandu,
If my understanding is correct, u can resolve it by doing as follows
1) Check correct navigation profile is assigned to your web IC profile
2) Lauch Web IC, Click on index.and check whether the short cuts u have defined in your navigation profile for your functions appears, Iif so , pl. check whether show keyboard navaigation short cuts in preferences is activated. Pl. activate it if it is not done already.
Hope this helps.
Best wishes
Arun

Multiple Views from "Identify Account" Navigation Bar

I have created a navigation profile called "Identify Account" and is linked to my Weblcient Profile. However, for ease of use, I would like to have to Views (V1-Individuals and V2 - Organizations) sothat the user can have the option to search for Individuals(Citizens/Non Citizens) OR Organzinations. Basically this would behave like a drop down list of views from the navigation profile. Do I use dynamic functionality or static?

Chris, old buddy, old pal, you have posted this question in two places.
Go immediately to the Spry Forum and read my answer there.
I realize you were hedging your bets on which venue was better for your question, but many of us troll both forums, and in this case, Spry is the more appropriate one for your question.
Beth

Navigation from interaction history to UIU lead screen

Hello,
I can't navigate from interaction history to UIU lead transaction screen.
I changed a navigation profile's Generic OP mapping from IC_LEAD to TBT108M_OV.
After that, when I select a lead transaction from lists,
the screen is navigated to component "BT108H_LEA"
with an error message "Component BUS2000108 called with wrong object".
Though the screen is successfully navigated, lead cannot be shown in the screen.
Does anybody know how to change navigation of Interaction history?
Does anybody try to use badi CRM_IC_NAVI_BADI?
I haven't try to use the badi yet, because firstly I'd like to try it without development.
Regards,
Fukuhara Yohei

I've got solved the issue!
I redefined code in method "OP_DEFAULT" of class "CL_ICCMP_BT_INRHISTRESULT".
There is a coding for opportunity in the method.
I added lead to transaction category judgment as follows.
old code *****
IF lv_object_type_s = 'BUS2000111'.
old code *****
new code *****
IF lv_object_type_s = 'BUS2000111' or 'BUS2000108'.
new code *****

CRM 5.0 Navigation bar entry that navigates to a custom BSP

Hello all,
I'm currently trying to add an entry in the navigation bar that redirects the webclient to a custom BSP.
I changed the navigation profile and added an entry that should point to a 'Navigational Link' ('Type of navigation'). When I use the input help it asks me a profile (IC profile, not navbar profile) so I select my Z profile, in the next screen an input help with all possible navigational links are shown but my navigational link is not showing...
What I've done so far:
   - I created a viewset containing one view, added the viewset definition to CRM_IC_ALL_Viewsets.xml which is in my Z_CRM_IC_DT_REP bsp application. Below you can find the file:
<ViewSet id="CONTACT/CustomFactSheet">
     <ViewArea id="main" views="CONTACT/myFactSheet"/>
</ViewSet>
   - I created the navigational links, it could be I made a mistake here, here is the file :
<NavigationalLink name="showFactSheet">
<Source viewRef="VehIDetail" outboundPlugRef="default"/>
<Targets>
<Target viewRef="CONTACT/myFactSheet" inboundPlugRef="inboundPlug"/>
</Targets>
</NavigationalLink>
- In my /CONTACT/CRM_IC bsp application I have two controllers:
   myFactSheet: controller for the view myFactSheet
   CustomFactSheet: controller for the viewset CustomFactSheet
I'm developing in a customer namespace /CONTACT/, not in the default Z namespace.
I created both the viewset and the view through the IC workbench wizards.
I cannot add this navigational link to my navigation bar profile. When I type the navigational link 'showFactSheet' in the navigation bar profile item (without using F4) and I launch the interaction center, click on the newly added link, nothing happens... (No error messages or dumps however) Everything else works, I have tons of other navigational links that work fine so it's really the definition of this particular item, all the rest of the configuration is done and is working.
Anyone an idea??
Thanks in advance!
Kind regards,
Joost

Look at this thread to get more inforamtion on creating Controller Class in Customer namespace..
IC Webclient - New context node in customer namespace
Thanks,
Thirumala.

APXSUIMP module: Supplier Open Interface Import ERROR

Hi All,
I am loading our historical data po_vendors from old EBS 11.0.3 to the new EBS 11i.
I inserted the data first in AP_SUPPLIERS_INT table.
Then I run the program APXSUIMP.
But I got the ff. error
>
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXSUIMP module: Supplier Open Interface Import
Current system time is 17-DEC-2008 15:55:17
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Spawned Process 2113682
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 6.0.8.25.0 - Production on Wed Dec 17 15:55:18 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 285681.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 17-DEC-2008 15:55:18
>
Can you help please....Thanks

Hi,
This is just a one-table test run only for ap_supplier_int > vo_vendors
By the way the set-up is non multi-org, does if affect the error?
Searched WebIV with "APXSUIMP REP-1419 beforereport" and found: .
Note.313569.1 Ext/Mod APXSUIMP Supplier Open Interface Receives the Following Error REP-1419 .
Symptoms
The APXSUIMP module: Supplier Open Interface Import is erroring with the following error: .
MSG-00003:
After Get_NLS_Strings REP-1419: 'beforereport': PL/SQL program aborted. .
Patch#4172504 - has been applied,
however, the process still errors. .
Cause
As this was a new test instance, the user had not set the
MO:Operating Unit profile option in the System Administrator responsibility,
nor run the Execute Convert to Multi-org utility from adadmin. .
The system was not setup properly. .
Solution
#1 - Apply patch#4172504 ->->-> this CT is already above this code
#2 - Responsibility:
System Administrator Navigation:
Profile-System Ensure a value has been set for profile MO:Operating Unit.
#3 - Execute Convert to Multi-org from adadmin. . .
WORKAROUNDS: ------------ Patch 5167581 was applied and did not resolve the issue .
Set for profile MO:Operating Unit. Responsibility: System Administrator
Navigation: Profile-System . No change, error still exists We also don not have value for MO: Operating Unit > What value should I put on this field?
Thanks a lot

Navigation Profiles

Similar Messages

Maybe you are looking for