NetQtime vs Delaytime (IPCC 7.0)

Hi All,
After i have researched both fields in ipcc report database( using document Schemadoc_722), i've found the following defintions:
DelayTime: The time in seconds that the call is active on the switch but not queued to a skill group or trunk resource.
NetQTime: the time in seconds the call spends in the router queue. Or in other terms it measures the time the call spends queued in the network VRU.
i can deduce from the above definitions that the delay time and netqtime overlap, however when calculating the call duration in Table TCD, both values are added
can someone please explain the confusion?
Thanks,

Hi there Fabien,
I've spent many hour trying to figure out some of the metrics like this as well. What I found to be a good resource besides the Schema Doc is the Schema Help in "ICM Admin WorkStation" Program group on the AW.
Here is the definition it gives about Delay time.
The time in seconds that the call is active on the switch but not queued to a skill group or trunk resource. For example, if a call arrives at an ACD and an announcement is played before the call is queued, from the time the call arrives at the ACD to the time the call gets queued is the DelayTime. DelayTime includes all time the call spent on announcements. For ACDs that can de-queue calls, a call can go back into the delay state and DelayTime can begin accumulating again.
DelayTime is used to calculate Duration in the Termination_Call_Detail record. It is also used to calculate the following fields in the Service and Route half-hour tables:
- DelayQAbandTimeToHalf
- LongestCallAbandTimeToHalf
- AnswerWaitTimeToHalf
The definition for NetQTime is a little more vague
Represents the time the call spent on Network Queue in the CallRouter. The LocalQTime field is used for local ACD queuing.
I've tried testing calls to try and get a call to receive a delay, but I haven't been successful. I know when we had issues with high CPU utilization on our CRS calls would take a few seconds to be answered by our IVR, which would create a small delay time.
Unfortunately I don't have a definite answer for you but hopefully the information I found and my experience will help you out a bit

Similar Messages

Issue in IPCC DB (db_cra)

I have an issue in IPCC DB (db_cra). In db_cra a table RTCSQSSummary is not updating its records.. I have configured Real Time Snapshot configurations. Table is working properly before but now records are not updatingf in it..
can anyone help me in this regard?

Hi Kyler,
You would be better served if you post over in this section of the forums
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/contact-center
Cheers!
Rob

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

CTIOS Login - IPCC Error [10156]

Hi,
Customer recently upgraded to ICM/CTIOS 7.5.9. Since then some agents are intermittently seeing the following error message when logging on.
" IPCC Error [10156]Login denied because agent exceeded unsuccessful login attempts. "
I haven't seen this before, and this error isn't listed in the IPCC error codes document http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_tech_note09186a00800e1524.shtml
Anyone have any ideas what could be causing this? Is there a new limit on unsuccessful login attempts in icm 7.5 ... if so, can we change the number of attempts allowed?
Thanks,
Brian

Brian,
Here is some additional information on these keys:
AccountLockoutDuration - Determines the number of minutes an agent account remains locked out before automatically becoming unlocked. Default is 15.
AccountLockoutResetCountDuration - The number of minutes that must elapse after a failed logon attempt before the failed logon attempt counter is reset to 0 bad logon attempts. The default settings is 15.
AccountLockoutThreshold - The number of failed logon attempts that causes an agent account to be locked out. A locked out account cannot be used until the AccountLockoutDuration has expired. The default settings is 3. Setting the value of this key to 0 disables the entire feature.
It is descibed in the scurity and best practices guide:
http://www9.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_5/reference/guide/icm7xsecurty.pdf
Page 139.
Hope this helps,
D

CISCO IPCC integration with TTY

Hi every one,
How can we integrate TTY devices to IPCC environment.
what are all the supported devices and softwares required
Thaks in advance
yugi.

if your TTY attaches to one of the IP phones currently
on the Cisco SW \ HW Compatibility Guide matrix, the IP phone and the
TTY should function fine. If it is utilizing a device that is not on
the Compatibility guide, then it is not supported. Here is the URL link to the Cisco SW \ HW Compatibility Guide, which
lists all the supported HW and SW. Just navigate to your current CRS
version for info.
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_s
upport_tables_list.html
Thanks,
Karthik

IPCC Express - CRS 5.0.2 - IVR is not working

Dear All ,
we have IPCC Express 5.0.3 integrated with CUCM 5.1.3 , IVR was working fine and suddenly stopped .
when i am dialing Piolet Number it ringing but not hitting to the IVR.
can any one advice please .

Hi Behrang,
Go to your Safari menu bar click Safari / Preferences then select the Security tab. Click: Show Cookies
Delete all Google / Gmail related cookies.
Quit Safari.
Open a Finder window. Select your Home folder in the Sidebar on the left. It has a small house icon. Now on the right open the Library folder, then the Caches folder, then com.apple.Safari folder.
Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari and see if that makes a difference.
If not, from your Safari menu bar click Safari / Reset Safari. Select the top 5 buttons. Click Reset. Relaunch Safari and try Gmail again.
Carolyn

In IPCC express,last 4 month report i;m not getting in historical report. in report it shows blank.

Hi all,
we are using IPCC express 5.0 with high availability and call manager 6.0.
Now i;m facing an issue in historical reports.i'm not getting last 4 month reportin the historical report and the report is blank.
when i troubleshooted, i checked for filter in scheduler file, logs and i couldn;t find any issues in that.
i observed in datastore control center, agent, historical, repository status is stopped in publisher and replication status also stopped. i tried to start it but it stopped again.
as per customer information, also agent phones are communicating with standby server not with publisher for last 4 months.
so i'suspect it is database replication problem for long time that is why i;m getting the report also for these 4 months.
please find the attachment for your reference..
please anybody can help me in this..
thanks in advance..

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

IPCC extension option not found under End user on CUCM

Hi
I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
Thanks

Hi
+5 for MR/Chris
1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
admin:run sql select paramname,paramvalue from processconfig
where paramname like '%nstalled%'
Thanks
Please rate all useful information

IPCCE Agent Whisper

Hi,
Can we achieved whisper to the agent ( Like this is Sales Call or Maintenance call ) prior to call delivery and answer by IPCCE with IPVIR.
Does anyone have a workaround or ideas on this? Is it possible with any IPCCE with IVR solution. I know it is possible with IPCCE with CVP 8.5.
Please help..
Regards,
DJ

Just as I post that I found an old email of mi
ne:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:Calibri;
mso-fareast-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
http://www.cisco.com/en/US/partner/prod/collateral/voicesw/custcosw/ps5693/ps427/prod_white_paper0900aecd8066a098_ps1846_Products_White_Paper.html
It’s under UCCX but applies for Enterprise as well as it is really a CAD workflow thing. Ideally for environments with IP Communicator as it uses a little VBScript application to invoke the Microsoft TTS to playback enterprise data via the PC but as it mentions you can use a Plantronix MX10 amp to bridge PC audio and a physical hardphone through to a single headset. Neat little way to do whispers as it doesn’t use IVR ports like if you use the method where you use the IVR to place a call to the agent and play an announcement first before routing the call through.

IPCC Outbound in "Not Ready"

Could someone tell me if IPCC Express agents can make outbound callbacks while in "Not Ready" state, and if so, which agent state the time would accumulate in.
Thanks,
Jon

No, agents should be in Ready state. Outbound is attached to queue.
All information you can find in Admin Guide (chapter 14) http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_5_0/maintenance/admin/crs501ag.pdf
regards,
PK

Problem in IPCC Enterprise 7.2.6 HDS data are deleted autometicaly.

Hi,
I m facing problem in IPCC HDS data related. In agent logout table has only one day data. This type of incident is occuring for many others table. Even dialer detail table has only one day data. So please guide me how can i overcome this problem. Coz my customer is generating many report by using this data. I m realy worried abt it.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi,
I suspect that the normal purging process on the hds is deleting the data in the agent logout table on the hds. This is how it works :
1. every day, it will purge the oldest data in every table based on what you configured. You can for each table say how long you want the data to be available (for example 100 days). It will purge every day the data older then the configured value. This can be different for every table.
2. There is an additional process that will check the size of the complete database. If it's full for 80% or more, it will starts deleting data as follows :
. go to the first table and delete X amount of data from the table . if size of the db is still more then 80% full, go to next table and do the same again as in previous step
This process stops when the db is less then 80% full. If at a later stage it hits the 80% again, the process will start all over. It will start again with the first table etc. So, if this happens a couple of times, a lot of data from the first tables in the database will be deleted and nothing from the last tables (alphabetical).
Now, how can you prevent this? There are of course 2 ways to do this :
. make sure your hds database is big enough to keep all data you want.
. make sure that the database is never over 80% full. You can make sure this is the case by purging enough data from all tables every day. So, you need to configure point 1 above so that for every table only X amount of days is kept. I see that you want to keep the agent logout data for 3 years. I don't know how you configured the other tables but if you want to keep all of them for 3 years you need a pretty big database. To confirm the number of days configured in system, pls check below keys in Registry of Logger and HDS.
From the logger :
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco
Systems,Inc.\ICM\Customer_Instance\LoggerX\Recovery\CurrentVersion\Purge\Retain\Agent\Logout
From the HDS :
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco
Systems,Inc.\ICM\Customer_Instanc\Distributor\RealTimeDistributor\CurrentVersion\Recovery\CurrentVersion\Purge\Retain\Agent\Logout You can find more info about how this works and how to configure this on this link :
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a008014f8b9.shtml
There is a tool which you can use to estimate how big your database should be if you want to keep X amount of days of data in table Y. You find this in icmdba tool (start > run > icmdba). Right click on your database and choose 'estimate'.
If needed, you can increase the size of your database. Please follow the procedures on this link to do so :
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a0080094927.shtml
Regards,
Soman Nair.
( Pls rate post if found to be helpful.)

Connecting to IPCC DB (db_cra) using Business Objects

Hi,
I've been tasked with creating a Business Objects universe against a CISCO IPCC SQL Server database (db_cra), and I have no knowledge of the database and how the system works. I also don't have access to the database outside of Crystal Reports. I can connect through CR with the instructions provided by CISCO and using an OLE DB (ADO) connection, and there's also a launchHRC executable that was added to the crw32.exe shortcut. The OLE DB (ADO) connection has Integrated Security checked, so I have no idea how I'm able to connect to the database and tables without being added to database security.
Business Objects does not have an option for creating an OLE DB (ADO) connection. I have no idea if it's even possible to connect to the database. Normally we have a default reporting user that's used to set up OLE DB and ODBC universe connections using SQL authentication.
And from what my colleague in Japan told me, it's not possible to add users to the db_cra database security.
If there's any information that you could provide it would be greatly appreciated I'm really lost with this one so any help or advice would be great.
Thank you!!
Kevin V.

Hi
It's best to specify product (UCCE, UCCX) and version when posting.
If you are UCCX v7.0 or lower, then see this : https://supportforums.cisco.com/thread/272601
The trick is to set up the account on the server with rights to the DB, and use the windows pass through auth method to access the DB using integrated security (as SQL auth is disabled by default).
If on 8.0 or higher it's different as you're in informix land, and need to set up and use the uccxhruser account.
Regards
Aaron

IPCC 8.0: Using Unity Text to Speech functionality

I wonder if you can use the Text to Speech functionality native to Unity to read a txt file containing string from a script IPCC.
The IPCC native TTS only read certain variables but can not read variables String.
Thanks
Leer fonéticamente
Diccionario - Ver diccionario detallado

I'm not going to say it's not possible, I'm sure with lots of time, resources, and duct tape you could come up with something. However, Unity is not really a peripheral (IVR, PBX, etc) so you're not going to be able to easily utilize it's funcationality within UCCE.
david

Errors in webview report, ccm 4.1(2) ipcce 6.0

Hi all
sometimes report shows
abandoned calls
with the same duration 5 min 14 sec
the caller hears prompt
then a single beep
and then silence
then the caller rings again
and after prompt the agent answers the call normally
ccm 4.1(2) ipcce 6.0
see enclosed file
when I monitor each step in script
I do not see this call in queue, and
looks like an agent answered

Thanx for reply
i got some R&D in some one of my colleagues with same application war, it was there then working.
at that end also Tomcat & Jdk were same.
at the last i found that some time before, there was a Tomcat 5 window installed server at my machine.
I had removed that properly and checked the CLASSPATH & PATH before facing my myFaces 1.2 problem.
next with some guesses i installed again Tomcat 6 window installer, and now myfaces 1.2 listener problem resolved.
i guess earlier it was taking some association with past Tomcat 5.
now can you advices me some tips to overcome this kind of tomcat environment related problems in future,
also i want to run same with Tomcat 6 Bin installed server also.

IPCC Database Insert

Hello everyone,
I have an environment of two servers: CCM 4.X and IPCC 4.0.5
I wish to insert a few records into its SQL DB (in the cdr_records table), these records represents a period where the IPCC server was down.
Although I can insert these records into the DB with no problems.
I want to understand how the IPCC inserts into its DB. I think it would one of either way:
A- It simply looks for the index of last record in the table (i.e. N) then increments and adds to the table at row (N+1)
B- It has its internal index and simply increments on that.
If it's case B, I'm afraid that it would overwrite other data of other periods.
Really appreciate the response.
Thanks,
Ahmed

What I've done before which seems to have worked ok is just used a negative value for sessionid (since the generated sessionid's are always positive and the column datatype accepts negatives this seems to work ok without having values get overwritten).
Cheers,
Nathan

NetQtime vs Delaytime (IPCC 7.0)

Similar Messages

Maybe you are looking for