"No User Information" on outbound mail

I just started sending mail out through our IronPort. The top user in the Top Users report is "No User Information". What might those be?

Also keep in mind that "No User Information" can refer to messages that have been relayed through the IronPort appliance without an Envelope-From address. For instance, a sender such as "<>".
These are typically bounce messages. This is not a defect or a critical issue. It is just the way the sending host is configured to send bounces.
The IronPort has no control over this setting. Generally, the sending host will add a "[email protected]" or "[email protected]" type address as the From message header for such bounce messages.

Similar Messages

User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address). This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

Validate "work e-mail" from user information list --give me wrong result

How can I validate the user "work email" from User Information List is working
properly?
I am following this >> http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e4d41f77-c7e4-40ef-b85f-de7f972f2a3f/allow-submitter-see-only-the-items-that-are-relevant-to-him-in-drop-down-list?forum=sharepointcustomizationprevious#4d63b721-7acb-463a-b578-87eb1d72b5f1
But instead to get the correct work email I am getting >>domain \usernamedomain
\username domain \username (example: americas\admin_andress_belloamericas\admin_andress_belloamericas\admin_andress_bello)
CRISTINA&amp MICROSOFT Forum

Hi,
How did you validate the work e-mail?
I recommend to set another text field to get the email of the user from User Information List and then use the text field for validation.
Could you please provide an example of your requirement for reproducing this issue?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Mail rejecting outbound mail, gives error message

Apple mail is all of a sudden rejecting outbound mail. It leaves this Error message:
"This message could not be delivered and will remain in your Outbox until it can be delivered."
"The sender address [email protected] was rejected by the server."
At noon it sent mail fine. A half hour later it won't send anything.
Mail host is not the problem as outbound mail goes fine through the host's web gateway.
I brought down and rebuilt all the account information once this morning, temporarily fixed it, now the problem is back.
Any ideas on what is going on and how to fix it?
Thanks.

Welcome to Apple Discussions!
Is your outbox stored locally on your computer?

User can't receive mail; sending ok

Hi, have read almost all mail topics, tried a lot of information, but nothing changed.
user has enabled mail in workgroup manager (both pop and imap) and in server admin(settings/access/services/mail) and server preferences/users/services
don't know what else to do.
some part of log in server admin
Feb 27 13:36:54 webbox pop3[3078]: login: webbox.local [fe80::20a:95ff:fea7:db06%en0] webadmin APOP User logged in
Feb 27 13:37:04 webbox lmtpunix[3757]: AOD: user opts: get attributes for user: [email protected] failed with error: -14479
Feb 27 13:37:04 webbox lmtpunix[3757]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Feb 27 13:37:08 webbox pop3[3078]: login: webbox.local [fe80::20a:95ff:fea7:db06%en0] webadmin APOP User logged in
The other user gets mail error after sending to [email protected]
The mail system
<[email protected]>: host mail.something.lv[/var/imap/socket/lmtp] said: 550-Mailbox
unknown. Either there is no mailbox associated with this 550-name or you
do not have authorization to see it. 550 5.1.1 User unknown (in reply to
RCPT TO command)
using mail.app, i can send mail from [email protected] to other people ([email protected] for example)

got it working by changing account name from webadmin to [email protected]
in server preferences/users
(virtual hosting form mail was already enabled all the time in server admin)

Unable to get User Information in infopath form hosted on sharepoint online(2013)

Im trying to retrieve user information (department, Manager, Work E- Mail, Etc..) into an infopath form hosted in sharepoint online using "/_vti_bin/UserProfileService.asmx"
web service. But it returns me an error when im opening the form as :
An error occurred while
trying to connect
to a
web service. Error ID 5566
Any idea about how to get those information into a form which hosted in Office365 environment?
Thanks.

I believe this is a known issue:http://support.microsoft.com/kb/2674193/en-us

Suddenly can't connect to gmail SMTP for outbound mail

I have both a MacBook Air and an IMac. Recently, I lost the ability on both machines to send outbound mail. With Apple Care help on my supported machine (the MacBook Air,) we rebuilt my gmail mail account on that machine and was able to reconnect and send outbound mail. (receiving mail was never a problem)
However, going through all of the same steps on the IMac, it keeps saying :"Gmail (offline) next to Outgoing Mail Server (SMTP) on the account information screen. When I run Connection Doctor, I have a red light next to Gmail SMTP with the message "Trying to log into this SMTP account failed. Verify that the username and password are correct."
Well, the username and password are correct. I just changed them, and can access Gmail from all of my other devices...MacBook Air, iPhone, IPad.
What is really odd it that is was working until about 3 weeks ago.
Any suggestions/ideas? I'm not particularly technical...just find this very frustrating and don't know where to turn.

Robert Wilkins2 wrote:
Thanks for your reply Csound. I know that it's not right to solve my own post, but after thinking the problem was solved, I clicked resolved. I wanted to share my "solution" with the community. Sorry about bad form.
No bad form to worry about, just the reduced attention to your problem that a solved designation causes.
If I remove my gmail account, I'll be able to get all the emails back when I create my new one - because it's imap?
Yes, but check 2 things,
1. That it is setup as Imap (POP is possible but is not the default) and 2 that you have not created any local folders that house mail from the Imap account, if you did then you must export them before removing the account.
What do you mean by verify both passwords? You mean imap and smtp?
I assume I should be using the application specific password in my mail settings?
Thanks,
Bob
Imap and SMTP should be the same, but check.

Work flow - user is not reciving mail,once CREDIT MEMO submits for approval

Hi All,
Please find the issue as below.
User created the credit memo and submitted for approval. user is expecting the mail in his mail-box, once he submitted the credit memo for approval and same way once approver approved the credit memo, user is expecting mail such that credit memo has been approved.
He informed that previously he is receiving the mails as expected.
Now all of sudden he is not receiving mails.
I have checked work flow mailer, mailer is up and running.
I have gone through the wf_notifications table, here i can see that MAIL_STATUS column having value of "MAIL".
even i have gone through WF_USERS table this particular user is existing and status is "ACTIVE".
But user is not yet received any mail.
Kindly some one help me to sort out this issue.
Thanks in Advance.
Edited by: user627525 on Jun 8, 2011 5:58 AM

Thanks RK for your quick reply.
I was gone through the details you have provided. every thing is fine as expected.
Later i have checked workflow mailer, it was down, due to that notifications are not reached to users/customers.once it is up and running mail notifications sent to respective users successfully.
Many Thanks.

Fonts set in outbound mail appear differently in recipient's mailbox

I run all of my Mac Mail v4.2 (1078) in Verdana 11pt. I have a variety of elaborate signatures, also set to Verdana 11pt. When I author outbound mail, in Verdana 11pt, attach one of many signatures, and then view those emails on receiving computers, some appear as authored, but most show up with the signature in Verdana 11pt, but the body in a generic serif font (perhaps Times or similar). I cannot figure out how to keep the entire email in Verdana 11pt, on all receiving computers. Happy to attach PDF for a visual, but not sure that's possible in Apple forums?
Many thanks.

Mail > Preferences does not have a setting that determines the font seen at the other end. You must set that individually for each outgoing in the New Message pane. Also you may need to set it to something else than what is set in Mail > Preferences.
Some users find this behavior too cumbersome and prefer to use another email client which does have this feature, such as Entourage or Thunderbird.
It has been discussed here often and at length, e.g.
http://discussions.apple.com/thread.jspa?messageID=11416664&#11416664

Once I purchase a new application from Apple store by using credit card, I used to get the billing information in my mail the next day. But now a days it is not happening why?

Once I purchase a new application from Apple store by using credit card, I used to get the billing information in my mail the next day. But now a days it is not happening why?

Probably volume of purchases on Apple Systems
by the way this is a user to user forum no-one from Apple here

My user information has been corrupted and I cannot open Microsoft Office

After the latest Office 2011 for Mac update, I have not been able to start Word, Excel, or Powerpoint. Outlook for some reason is ok. After going back and forth with Microsoft, I have discovered that I can open these programs if I have created a new user account on my mac. Is there away I can reset the pertinent user information in order to open these programs on my existing user account?
Thanks

Are you now seeing two versions of Mail in Applications?
Try moving the small 8.1MB Mail.app to the Trash. But don't empty it. Then download and install the Security Update again. http://support.apple.com/kb/DL1586
If that doesn't work, use File>Put Back for the one in the Trash and see this post and the two following it. If you get another small one as a result, you can keep working with that one for this workaround. You won't need the one from the Trash.
https://discussions.apple.com/message/19711910#19711910

Query on default outbound mail poliy

Hi,
Is it possible on Ironport to drop all the outgoing mails to other than local domain by default. After this we Can create new policies above the default policy with some users who are allow to send e-mails to a particular domain?
For e.g:- I have a set of users who can send emails only to gmail other than the local domains and another set to send only to rediff.
Any help is highly appresiable.
Is this going to work on Ironport?

Hi Tharun,
just curious, are you sure outbound messages to your own domain get routed through the IronPort appliance? I would assume your mailsever just moves those between it's mailboxes. Anyways, to answer your question, basically you create another outbound mail policy with your local domain as sender. Then create a filter that only has a drop() action, and activate it in your Default Outbound Mail Policy (and only there!). So this way outbound recipients to your domain will use the new created mail policy that bypasses the filter, while every other domain will use the default policy, where the message gets dropped.
Hope that helps,
Andreas

POP users cant see new mail on OSX 10.5 Server

Hi All,
I have just upgraded my 10.4 server to 10.5. I had to do a clean install due to some problems with the upgrade. My problem is, most of my POP3 users can not see any mail. The mail is being collected and can be accessed with the users login details via web mail. When the user login in using Outlook, it checks and finishes as if there is no new mail.
If the user reconfigures their mail client to IMAP is work just fine, but IMAP is not good for some of my users needs.
I found that there are no error messages at the user end, or on the server logs. Any help would be greatly appreciated.
Thanks for reading.

Hi Hamish,
I have exactly the same problem with some POP3 users that use as mail client Microsoft Outlook 2003 and 2007. Up to now I don't have problem with Apple and Linux clients. I found out that users in which the alias differ from the shortname in the Open Directory record (which is the first shortname and mailbox identity) can't see the incoming Mail. For example, if the first shortname is user0001 and the alias is tony, I set [email protected] as the email address and user0001 as the User Name in the login information of Microsoft Outlook Configuration.
Thank you,
Tony Mendoza-Rosa

Extending user information entries?

Hi there!
Is it possible to extend the user information (such as E-Mail address or Telephone) with "arbitrary" data (e.g. Age / Date of Birth)?
The entries "Position" and "Department" of "Additional Information" make it seem possible to me, I haven't found anything so far, though...
Thanks in advance!
Dennis

Hi Dennis,
yes it is.
http://help.sap.com/saphelp_nw04/helpdata/en/a3/d2ffd64602c149949ca3cf379dc295/content.htm
These additional attributes are stored in the database.
If you only want to display addtional iViews that are stored in your corporate ldap, the configuration would be different.
Regards, Karsten

My mail application was working fine, I shut down and when I restarted it is asking me to set it up again. I dont want to loose any information on my mail and I had a lot of accounts on it. . what can I do?

My mail application was working fine, I shut down and when I restarted it is asking me to set it up again. I dont want to loose any information on my mail and I had a lot of accounts on it. . what can I do?

I found all my files from my old account in the users folder but when I logged out there was no option to sign in on the old account, I'm guessing ill just have to start from scratch, which is fine as long as my old files aren't lost :) thanks for the help.
I'll explore more once I get my screen fixed and there might be a way to recover my old account :)

"No User Information" on outbound mail

Similar Messages

Maybe you are looking for