Planned order deletion in mass

Hi,
I want to delete all palnned orders in the plant.
Planned order can be deleted using MD16. In MD16, MRP controller is the mandatory field. We can't delete all the planned orders in one stretch in a plant. We can delete the planned orders in a plant MRP controller by MRP controller only. My requirement is without giving MRP controller, the system has to delete all the planned orders in the given plant.
Is there anyother way to delete all the planned orders in a plant.
Regards,
V. Suresh

Dear Suresh,
Check whether T code MDBA,can help you.
Also refer this thread.
Re: Collective deletion of Planned Orders
Regards
Mangalraj.S

Similar Messages

  • SNP planned order deleted in APO, but not in R/3.

    OK Guru's,
    We have a situation where during the weekend SNP planning runs, SNP Planned orders are deleted in APO, but the order is never deleted in R/3.  The change pointer is not in CPP and there are no failed queues.  Also, when you run CCR on planned orders, we will get an error on some orders saying "Not in APO" and the only option to reconcile that order is to "Send to APO".  The option that should exist is "delete in R/3" becuase the deletion never occured in R/3.
    If you send the order back to APO, the order will show in the "Production Confirmed" line of the Planning Book.  This is because APO is thinking that this order is an order that was created in R/3 when in fact is it really is a SNP planned order.
    Any clues to why this would happen?
    thanks,
    Brian

    How are you getting the SNP Planned Orders to R/3 in the first place.
    If you are transferring them using /SAPAPO/RRP7 then I guesss its a manual transfer and system does not consider SNP Planned Order deletion flag relevant for transfer to R/3.
    You will need to look into CIF enhancement to send the deletions to R/3.
    Normally SNP Planned Orders are not relevant for transfer to R/3 unless its replaced or converted to a PPDS planned order.
    Somnath

  • Planned Orders Deleted

    Hi Experts,
    How do you delete collective planned orders? I mean by simply indicating the plant or MRP controller. Is there a log or you trace for this? What transaction code is used for this?

    Hi,
    MD16 - Collective display planned orders
    Just highlight the planned orders which you want to delete the planned orders then press "delete" button
    once planned order deleted, can't trace the history, no log file
    Regards,
    Sankaran

  • Mass T-code Of Planned  Order Deletion

    Dear All
    Is there any mass T-code  For Deletion of bulk planned order. An PIR.
    Rgds
    Pankaj Agarwal

    Hi,
    You can use function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
    Features
    SAP supplies the function module MD_SET_ACTION_PLAF for action control.
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    <b>Delete planned order</b>
    Confirm planned order (in repetitive manufacturing)
    Firm planned order data
    Firm planned order components
    Print component overview
    This is in the foll link...
    http://help.sap.com/saphelp_470/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
    Use T.code md75 to delete PIR.
    Regards,
    Senthilkumar SD

  • Planned Order Delete

    Dear ,
    Can it be possible by single t-code i can delete all the planned order at plant level.

    Dear,
    You can delete a planned order by tcode MD12 / MD04 OR delete the requirement in MD62 after that run MRP (MD02) with planning mode-3 deleted and recreated. OR MD16 is the only option to delete all planned orders in mass.
    And check the result.
    Regards,
    R.Brahmankar

  • Planned Order deletion during MRP

    Hi all,
    We want to delete the planned orders during MRP, but before saving is done.
    So, we are trying to use the BAdI MD_PLDORD_CHANGE and method CHANGE_BEFORE_SAVE_MRP .
    After finding out the process order, we were trying to set the importing parameter IM_VSTAT to "L", which can be used to delete the planned order..
    But since it is an importing parameter, we cannot change the value of the parameter.
    Is there any alternate ways of deleting the orders before MRP is done ?
    Regards,
    SP.

    Not sure I understand the situation correctly...You want to delete the planned orders before MRP runs again. WHy do you want to do that ? Are these firmed Planned orders ?

  • Planned order scheduling mass update

    Hello all,
    Is there a way I can change the scheduling dates for the planned orders collectively. (not MD16) ?
    Thankyou

    Hi,
    check the following
    Mass Changes of Planned Orders (Action Control)
    Use
    You can use this function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
    Features
    SAP supplies the function module MD_SET_ACTION_PLAF for action control.
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Confirm planned order (in repetitive manufacturing)
    Firm planned order data
    Firm planned order components
    Print component overview
    In connection with an action, you can always change planned order data, for example; order quantity, dates or production version.
    The function module also enables you to program further customer-specific actions.
    You can execute the actions for several planned orders simultaneously.
    You can create action chains, that means, have the system execute several actions in a single operation.
    Activities
    Define your own actions and program a report that includes these actions. As an example of this, the transaction MDAC Execute action for planned order (MRP ® Planned order ® Execute action) is available.
    In this example action, you can use actions only for individual planned orders. Nor can you form action chains, only simple action transitions are possible.
    Determine an action key and action controls in Customizing for MRP in the IMG activities Define action key and Define action control. An action key describes the actions that can be executed for a planned order. Action controls determine which actions are allowed and in which sequence they are to be executed.
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Regards,
    nandha

  • User exit/ badi needed for planned order create/change,collective ATP check

    Dear All,
    I'm looking for a user exit/ badi which can be used for planned orders at the stage of
    mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
    I need after collective availability check to perform the following:
    1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
    then
    2) to start a scheduling.
    Very appreciate your help.
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
    Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

    Dear,
    Use the BAPI : BAPI_PLANNEDORDER_CHANGE
    Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
    and the transaction MDAC Execute action for planned order
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Please refer this thread,
    Re: MDVP for collective orders
    Regards,
    R.Brahmankar

  • Kanban:How to make MRP planned order non actionable?

    Scenario: In house Mfg with REM
    Process : Kanban (Classic)
    Example : Item "A" is in-house mfg subassembly.
    When Kanban is triggered, it generates planned order. Using REM, the mfg is done against the planned order and the Kanban cycle is closed.
    Meanwhile, the MRP generated planned orders are also actionable. These also can be used to mfg &  stock "A".
    Question :Can the MRP generated planned order be made non actionable?
    Thanks,
    Wish you all A very Happy, Joyous Diwali And Prosperous New Year!!
    Nitin

    Hi
       I beleive u have selected options of generating planned orders both by mrp and kanban(since same storage location is being planned both by MRP and Kanban). one option is when kanban generates planned orders, delete the planned ordes that are generated by mrp (eg if mrp already has created planned orders of say 400, kanban is triggered for a planned order of 100, based on settings we can immediatly decrease mrp order to 300 as the 100 is now covered by kanban(so total of 400 qty in plnd order at the end of the day)). pls let me know if this would solve ur problem.
    Sam

  • Convertion of planned order into Purchase Requisition

    Hi,
    I have a planned order with Qty 50 (I have checked in MD16 it says qty:50)
    Scenario 1:
    I converted it to Purchase Requisition with qty.40, with change in qty. 10 numbers. After converting with qty. difference, I checked it in MD16, it say the qty as 10.
    Scenario 2:
    I converted it to Purchase Requisition with qty.60, with change in qty. 10 numbers. After converting with qty. difference, I checked it in MD16, I never find that Planned order in the list.
    Now my questions are:
    1. In which table this difference will be stored?
    2. Or is there any t-code to see this Pl. order and PR qty. difference?
    3. with respect to the second scenario why the planned order is not listed if i put more qty. in Purchase requisition than in the planned order?
    4. Is there any setting to be done in IMG?
    Thanks in advance.
    Regards,
    Dhan
    9600934854
    Edited by: DHANAVEL SUNDARAM on Feb 23, 2011 5:20 PM

    Hi
    Planned order are just like PR assume that if you have PR of 100 Qty but still you can do PO more then of PR Qty.
    In the same way in case of planned order either you can convert it to PR or Production/process Order it behaves in the same manner.
    Planned order data will be stored in table PLAF but once planned order deleted or converted it will not be in any table
    You can fetch the deleted planned order data or converted planned order data.
    But still you can go to individual PR to see the reference of Planned order no there.

  • How to view the planned orders in mass and how to delete in mass

    Hi gurus,
    How to view the planned orders in mass and how to delete in mass.
    Regards
    R.Rajakarthik

    Hi,
    Use the collective display of planned orders, transaction code MD16.
    You can select the data by different options and choose which ones or all that you need to delete.
    Click the Delete button to trash them.
    This will delete planned orders without deleting the planned independent requirements and sales orders.
    Hope it helps

  • Delet plan order through mass processing (cohv)

    hello,
    PP experts i want the solution for deletion of plan orders in the transition cohv
    in the COHV transition  the mass processing selection do not have the function
    technically complete for plan orders.
    plase tell me how the function tech. complete can be created for the plan orders in the COHV.
    regards,
    mangesh

    Mangesh,
    As suggested by fellow forum members "MD16" is the only possible option in Standard SAP to delete planned orders in mass.
    If you need anything other than that you need to go for your own custom program to do the way you want.
    Please close the thread after rewarding points for answers which helped you.
    Regards,
    Prasobh

  • Deletion of firmed Planned orders

    Hi,
    I want to delete the firmed planned orders & Purchase Requisitions for Multiple plants,(Not using MRP Run) so can any one advise me if there is any SAP standard transaction or Program available.
    I have tried using MD19, but here we can pick firmed Planned orders only w.r.t Material or MRP contriller, we can not select Planned orders of whole plant (or) for Multiple plants.
    Please let me know if required any further information.
    regards,
    PR

    Hi,
    Not sure if CO41 can meet this need. If you select the lines & click on delete it is just removed from the list & not from the database. However if there is any new functionality added to CO41 for deletion would be glad to know.
    However for mass deletion of planned orders you can do this via a Z program using Bapi - BAPI_PLANNEDORDER_DELETE & for Purchase Requisitions use BAPI_REQUISITION_DELETE along with BAPI_TRANSACTION_COMMIT. Provide your specifications to your abaper & it should be possible.
    Regards,
    Vivek

  • Mass update for production and planned order MRP controller

    Hi Gurus,
    It's anyway possible to mass update MRP controller for Production orders and  Planned orders. If any please provide me step by step process.
    Thanks,
    B.Deethya.

    I feel You have changed the MRP controller in Material master and want to incorporate same in production order & plan order.
    For Planned order Run MRP with delete and recreate mode, system will create a new plan order with MRP controller in Material master
    For production order, Mass change is not possible, create a simple BDC or LSMW, And change the MRP controller

  • Deletion of Planned Orders

    Dear all,
    At the end of every week, we want to delete all the planned orders available in system.  I tried COHVPI, but there is only two mass processing functin available, Convert Planned Orders and Material Availabilty Check.
    So, can any one tell me which transaction code I can use?
    Thanks and regards,
    Devang

    Hi
    There is afunctionality called "Roll forward period"
    The function of this:
    To automatically update the master plan, you can set the system so that firmed planned orders that were scheduled before the roll forward period can be deleted during the planning run. With this function, all planned orders, for which there are no longer any requirements, are deleted.
    For this you have to have some config settinglike:
    In step "check MRP types", you can maintain the indicator "Delete out-of -date planned orders" which is used to set the system so that firmed order proposals, that lie beforethe roll forward period, are deleted in in the planning run. At the same time, new planned orders are created that are adjused to the current situation. (Or depending on the fixing type the old order proposals are displaced to the end of the planning time fence.)
    This is available in the IMG step:
    Production >MRP>planning>MRP calculation>Define planning timefence& roll forward period.
    Pl. try this & come back.
    Regards
    YMREDDY

Maybe you are looking for