Post to inspection stock in inspection lot origin 12

hello,
any body please help me. when i am using inspection type 12(delivery general). in that i am not getting post to inspection stock field. how i get that. because my senario is when i am doing delivery stock should go quality and then only deliverd. because products are batch sensitive product. but when i am using that inspection type inspection lot is creating but stock is not posting to quality. how can i overcome this issue.
thanks and regards
bhakta

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Similar Messages

MBBE-"Quality. inspection" stock shows Inspection lot as "Unrestricted"

Dear All,
In MMBE, a material is available in "Quality Inspection" stock.
We checked in "QA32". There we can see, it is in "Unrestricted use".
How to move the stock from "Quality Inspection" to "Unrestricted use".
Any suggestions.
Regards,
Mullairaja

create a inspection lot manually for the qunatitiy that is still in Q-status and do a usage decision

Post to inspection stock indicator not selected

Hi
We have a material with LEER material type (i.e. empties) with serial numbers. We don't want it to post in inspection stock when GR is performed. I have deselected indicator "Post to inspection stock" in inspection type setup in material master. User performs 103 Mov Type in MIGO screen and an inspection lot is created. We enter results using serial numbers and make UD successfully.
MM user performs Release GR block stock and stock is moved into un-restricted using Mov Type 105 irrespective of inspection lot status (coz Inspection Lot was not stock relevant)
The only problem is that UD is done successfully despite inspection lot stock tab which shows quantities to be posted and lots are shown in QVM2 - Inspection Lots with Stock.
We want that when post to inspection lot stock indicator is deselected for the material, its inspection lot quantities posting status should be closed at UD and should never be appeared on QVM2.

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Cannot create copy of Std inspection type 08 (Stock transfer inspection)

Dear All:
I have created a copy of std inspection type 08 as Z08CP. I have made all the relevant assigments in IMG such as Maintain Inspection Lot Origins and Assign Inspection Types, Default values, etc.
During my unit testing I did use the newly created Z08CP but I have noticed I keep getting the error message " Change the inspection stock of material XXXXX in QM only" BUT THE MOMENT I SWITCHED THE MATERIALS MASTER BACK TO inspection type 08 the problem is gone. Only when I have the std inspection type in the material master I am allow it to post a MB1b (322) and created the inpscetion lot in the background
Weird !!
Any ideas.
Regards,
Mauricio

Let me see if i understand exactly what you guys are saying.
Following entries have been made in IMG
1. Plant dependent QM settings. Inspection Type for Available Stock in Quality Inspection field is empty
2. Maintain Inspection types: Created Z08CP as copy of 08
3. Maintain Inspection Lot Origins and Assign Inspection Types. For lot origin 08. created the following relationship
Lot Origin 08
01 08 Stock transfer inspection
02 Z08CP Prod Defect: Stock transfer inspection
4. Default values for inspection type. Copied default values from 08 to Z08CP
Note i did not make any changes to IMG section "Inspection for Goods Movements"
I tried again and same error was displayed. what is that I am missing here?
Regards,

Inspection stock tab in UD

Hi Experts,
There is no tab of inspection stock in UD screen.
I am trying to post stock from quality to unrest. from UD screen for lot origin 10.
Please help.

hi,
There are basically two types of inspection Stock relevant inspection and Non stock relevant inspection.
1.Stock relevant inspection : ex. inspection type 01,04,08,where after the UD you are going to post the stock from one location to another say from quality to unres,or blocked etc.Here you will see the stock posting tab in the UD screen.
2. Non stock relevant inspection: ex. 10,03 where stock remains in the same location and you are doing the inspection there itself sa in 03-in process inspection the inspection is carried out on shop floor and even if the UD is OK the stock remains on shop floor itself so there is no need of Stock tab and hence these inspection types do not require stock tab in UD.
Hence you cannot see the stock posting tab in 10 inspection type .
Thanks
Manisha

How to differentiate the insp lots with same lot origin

Hi,
My client is
1. Procuring a Finished good directly ( same way as Raw material is being procured ) & then sale it.
2. In another scinarion the same material may be produced at Vendor's end ( Sub contracting )
3. In another scinario this is in house produced material.
Now the requirement is seperate tracking / list for each case.
Inspection type 04 can be activated to address the 3'rd case.
But how to segregate 1'st & 2'nd case from each other ???
I have created one new inspection type Z01 for lot origin 01. Similarly insp type 01 is also activated.
If Z01 insp type is marked as preferred insp type, then system always consider this insp type.
How to differentiate inspection type Z01 & 01 at incoming inspection stage ????
regards,

Dear Gajesh / Roderick
Thanks for reply & Sorry for the delayed reply from my side.
Gajesh as per your suggestion i used the break point in user exit QAAT0001 & after that i have executed PO & MIGO transaction, But after executiing it did not stop at a particular break point.
AM i doing some thing wrong???? or any alternate solution is there??
Roderick, i have explored the status profile but found to be use fulll for changing stage one time only. i.e. between 0101 to 01. But here i want to choose the inspection type base on PO type.
Kindly suggest further action.
Once abain thanks.
regards,
Singh
Edited by: Singh15667 on Jul 24, 2009 10:54 AM

Displaying inspection lot (not posted in inspection stock) as mrp element

Hi guys,
we are implementing SAP QM. Our problem is that we are not using the inspection stock because we are also implementing a non-sap warehouse system. So we are not posting our goods receipt which have to be inspected in inspection stock but the inspection lot for the material is generated. Now we want to display this inspection lot in the transaction MD04. We suspect that we have to injoin in coding which we want to avoid. Has anybody of you experience or information with this issue? If yes I would appreciate your help a lot.
Thanks for your help and answers in forward. Of course I reward all answers with points.
BR,
Bernd
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder

Hi Ymreddy,
thanks a lot for your answer. Unfortunately the situation is as i had explained. We are implementing SAP QM and we also have to link a external warehouse-management-system with our SAP-system-landscape. So if we want to post the goods receipt, which has to be inspected by quality department, in our warehouse manangement system, we cant post anything if the goods are on inspection stock. Goods in inspection stock can only be posted out with usage of the UD (usage decision). But the goods receipt place in reality is too small for waiting of this decision from quaility and so the goods have to be posted in the warehouse. Because of this situation we can not use the inspection stock. If we would use SAP WM we would not have this problem. We handle this problem in using restricted batches for the goods receipts. So we can post the GRs in the warehouse system but you can not use it if the usage decision is not made. I hope i have made the situation a bit clearer to you now.
My problem now is, that the material requirements planning team wants to see in MD04 the goods which are in a inspection lot as you can see it in standard if you use inspection stock for these goods. But if the goods are not posted in inspection stock with the inspection lot you can not see it in MD04, unfortunately. My question is, are there any user exits, customizing settings or any experiences/ideas of you to handle this problem?
I appreciate your help a lot. So thanks for your help in forward.
BR,
Bernd

Return posting to quality inspection stock

Hi QM Gurus!
How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
I would appreciate if anyone could help me.
Regards,
Heinrick Palad

hi heinrick
you can reverse the stock positing providing following prerequisite have been meet,
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
regards
thyagarajan

Manual Inspection Lot for Inspection Lot Origin '04'

Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material for the Specified Origin. I feel that there is some customizing issue. Please suggest.
Thanks

Yes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal

Assigning inspection lot origin to new movement type

Dear Gurus,
I have created a new movement type. How do i assign inspection lot origin to this new movement type?
Regards,
Abhishek

Dear Sujit,
We are using inspection lot origin 06 for customer returns. However 06 doesn't allow you to post stock. The quality team wants to post the stock to unrestricted or scrap or blocked as per the inspection result. If we use inspection lot origin 05 then we are able to post stock for the inspection lot generated while transferring the stock form returns to quality. Now the problem is for prodn GR that is for FG we r using 05 for the same material. So there is a clash as inspection characteristics for FG and customer return is different but usage is becoming same-5. That's we are trying to create a new movement type 957 by copying 457 but we are unable to create and assign inspection lot origin to it.
Regards,
Abhishek

What is difference between inspection lot origin 05 and 06.

Hi,
What is difference between inspection lot origin 05 and 06.Please give me suitable business example.

What is difference between inspection lot origin 05 and 06.
Dear Both are used for sales return delivey inspection purpose.
05 is stock relevant and 06 is non stock relevant in 06 inspection type you won't get any stock posting screen.
For example and more useful info.check this thread:
Re: QM Sales Return Process
Cheers
KK

Actual lot Qty and inspection stock

Hi,
We are using early inspection for 04 inspection lot. When I release my process order the inspection lot is created. As usual, the first inspection doesn't have Actual lot qty and Insp. stock is checked. Now, when I create new inspection lot for same process order, the inspection lot has Actual lot qty and Insp. stock is unchecked.
In material master Post to insp. stock is checked.
Thanks for your help in advance.
Bhavesh Patel

Dear
U need to go for Order Change Management For doing This As u said ur Changing the Qty and it should reflect in the inspection lot
Please Follow this Link :
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?QuickLink=index&overridelayout=true]
With Regards
Pushpalas

Inspected stock posting to multiple storage location without batch

Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KS

The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig

Stock posting in block stock after grn for source inspection

Hi All,
I have following scenario
I am doing source inspection at vendor site i have maintained control key 0005 in material master & necessary certificate with certificate check required at GRN & UD stage
i am creating a source inspection lot for a release po through t.code qi07 & then processing that lot before GRN
Now when i am doing GRN for same PO it is giving me the following message stage
<b>A category ZC01(user sp. category) inspected certificate is required</b>
Message no. QA312
Diagnosis
An inspected certificate must exist at the first goods receipt for a purchase order item.
Procedure
Check whether a suitable certificate exists for the purchase order and delivery, and create a certificate record with the status "Certificate checked and stored".
If there is no certificate or no suitable certificate, this does not comply with the requirements in the material master record. If there is no inspection lot for this goods movement, the system posts the quantity to blocked stock or does not post the goods receipt.
If you have created an inspection lot, the system marks the certificate check with the status "In lot". You must confirm the availability of an inspected certificate by the time you make the usage decision.
after doing the GRN stock is being posted to block stock
if i do not process the source inspection lot then the stock is posted to quality stock but this does fulfill the requirement of source inspection
plz suggest soultion
It's urgent
Regards
Ashutosh Shende
9860681314

Hello Ashutosh,
In the material master you have defined certificate type with the customizing setting indicator for 'Enhanced Certificate Processing' active.
If you set this indicator, extended certificate processing is active for
this certificate type. You can then manage the inbox for quality
certificates independent of the goods receipt.
The electronic inbox of certificates for the purchase order is only
possible if this indicator is set.
This means you have to create a certificate in QM (Transaction QC51),
before you can update your PO with cert. enclosed.
If you do not want the enhanced certificate processing you have change
the indicator into inactive.
Another problem known here is if you have activated the 05 Inspection type in the material master, that it is not activated in all plants relevant although QM in Procurement is set in all plants.
I hope that this resolves the described issue.
Regards,
Isabelle

Post to Inspection Stock Problem

Dear Gurus,
What is the other ways for a material to be able to be posted in "QI stocks aside from MM02? I am referring to a production order when GR should be in QI stocks. I am using CO11N for production order GR not MIGO. Is there a setting in CO02 where I can set-up inorder for the stocks to be posted in "QI"?
Please advise.
Thanks and regards.
Ching

Ching
First of all , will you please tell us why you are looking for another option than MM02 for stock posting to QI.
The QM logic is as follows....
1 - We set the inspection set up in Material Master with inspection type 04, to create inspection lot upon release/confirmation of production order.
2 - We then process the inspection lot after carrying out the inspection to move the stock from quality to unrestricted.
If you do the settings in CO02, as suggested by others, you may not have the inspection lot created to process though the stock will be posted to inspection.
Can you be clear, on your requirement in detail
Regards
Mahesh

Post to inspection stock in inspection lot origin 12

Similar Messages

Maybe you are looking for