Problem when Indicator for Alt. labelling for functional location activated

Dear Experts,
In our test system, i had activated alternative labelling for functional lcation for an interface with Locations in ISU.
After i activated it the entire labelling for functional locations got changed to some arbitrary sustem generated number. For a sample -?0100000000000000142. Is there a ways i can retrieve the original names back. We have reactivated it to inactive again.
Please help.
Thanks,
Boby Mathew

Hi,
Once alternative labelling is active, the previous functional location number (IFLOT-TPLNR) and OBJNR become a internal number. The visible location labels are stored in table IFLOS (Field STRNO).
How easy it is to revert to status 1-Inactive depends on the existance of IFLOS records. If there are no IFLOS records it should be possible to just deactivate via OIPU transaction - Uncheck the 'alt label active' flag - Save.
Where IFLOS records exist it means functional locations have already been created while the switch was active. These functional locations must be archived. See the full instructions for this process in note [359186|https://service.sap.com/sap/support/notes/359186]. It's a old note but is still valid for all current releases.
-Paul

Similar Messages

PM-Change label of functional location

Hi
Can we change label of functional location?
Rgds
Pooja

Hi,
check this link http://help.sap.com/saphelp_46c/helpdata/en/41/c11662ee8411d29a640000e8a529f3/content.htm

Problems when creating a transfer order for moving storage units

Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John Nijburg

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

Problem when Opening a file in the Function Moudle

Hi,
I was encountered a Problem , when i am opening a file from the function Module,
But when i tried the same code in the ABAP Editor it was working fine.
Is there any Difference from ABAP Editor & Function Module Editor
(ex : Un-Code Etc ) ...
Let me know if your have any conserns. Thanks In Advance.
Regards
Nag

Hi,
In the FM'S u might have declared the import,export,tables parameters.So u have to use these parameters in the source code editor of FM.If u don't use any of these parameters and try to use any other parameters which also not declared in the FM source code,then u will get the error.pz check the parameters u r using in the FM....
Regards,
Nagaraj

Change structure for list editing of functional location

What is the significance of change structure for list editing (t code il04) of functional location?

just enter the functional locations you need to create and descriptions and save

FM for changing address in functional location

Hi all
I wanted to change address in functional locations in my report, but I don't know any function modul for this. I've found BAPI_FUNCLOC_CHANGE, but it's not possible to change address data with it. Normaly it's done through IL02 transaction. I would be grateful for any help.
BR

Pete Atkin,
If you go to transaction IL02 and on tab Location you push pencil button, than on new window you can change some of address data but not all that are storred in ADRC table. For example you can change street name or city name, but there is no place that you could enter city code or street code. So if this is not possible to enter these values in this transaction it is not possible to run this transaction from report with BCD data so that street code and city code were changed in ADRC table.

Codedui - sendkeys for ALT does not function when replaying scripts in remote desktop

using remote desktop to access server that executes codedui. the script contains sendkeys steps. the first step is to click the ALT key. watching the replay, the alt key never gets 'sent/clicked'. script executes successfully if
executed directly on the server machine (not using remote desktop for replay). how to get sendkeys to execute replaying codedui on server accessed by remote desktop?

Hi cemav,
According to your description, it seems that the coded UI test script is created in VS IDE on the server machine.
Could you please tell me detail steps about how you use the remote desktop to access server that execute the coded UI test script?
Please share me the error log about executing the coded UI test script fail.
From this issue, I suggest you try to check if you can access the server machine successfully without executing the coded UI test script from the remote desktop?
In addition, I suggest you could use DrawHighlight Method /SetFocus()
to check if the correct control is found before you perform actions on the target control.
Or you can also refer the following blog to check your issue.
http://blogs.msdn.com/b/tapas_sahoos_blog/archive/2011/11/07/troubleshooting-record-and-playback-issues-in-coded-ui-test.aspx
If the above suggestion still could not help you, I suggest you can share me the latest message about your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problems when Booting my Mac/ Partitioning for Windows 7

Hello Community,
3 months ago, i bought a MacBook Pro mid 2012-model. I was very satisfied until a really big problem occured.
The first time I recognized a boot-problem was when I restarted my Mac, a screen with the "forbidden-symbol" came up, after the Apple Logo. So I read some articles on the web and tried to restore my mac. After some trys, this was successfull after about 5h (got slow internet connection). I could also start my mac successfully, and in the boot menu, when hitting alt on the keyboard, a normal Mac partition, and a recovery partition could be seen (Before it only a Mac partition was there, no Windows and no recovery). So I started OS X successfully and looked into hard drive diagnostics and let the computer check the Hard Drive. It said that it was successfully, but after booting the second time (after successfull restore), I had the same problem again (and there was only one partition showing in the boot menu).
Finally, after 4 days of problem-solving, I managed to install windows 7 on my mac, without installing mac. Now I want to make a Mac recovery disk on windows, and use it for restoring.
So my question is:
1. What is causing the boot-problem and how can I solve that? I am sooooo desperated and just want to go back to Windows computers .
2. If there is no chance I can repair my mac, how can I create a recovery diskon Windows? (This question is less important, but i'd be REALLY thankful for any hints)
Thank you in advance!
With best regards,
David Al

Got it. Thanks for the help. Isn't there any boot disk thing that I can just stick in there that will jerk the OS sideways and give me the Mac login screen, or did the Bootcamp/partition attack just wreck everything? I don't see why I have to do an entire scrape of my totally updated and formerly working OSX just to retry a routine Bootcamp partition, which the girl at the Mac Store in Seattle here assured me has worked for them all the time. It really is a crock. Maybe I shouldn't bother trying to put Windows 7 on there at all if all these latest versions are so flimsy. I wouldn't want to have to do it all again. But it looks like I'll have to at least once. And send Apple the bill for my wasted time. I ain't feelin' the glamour.

Problem when change bank clearing account for payment posting.

We recently changed the bank clearing account for payment posting (program PC00_M99_PPM). But I found out because the config can only be changed but not delimited on payroll side, the program errored out when it retro back for an employee to the old clearing account. So what am I supposed to do to fix this problem?
Have anyone ever handled this problem before and could please throw some light on it?
Thanks in advance.
Johnson

hi
check following
1. Check in OMWD, whether Valuation grouping code "0001" ia ssigned to Ur plant
2. OBYC - If you have assigned GR/IR Clearing A/c to WRX then check whether you have maintained it with combination of valuation class and GL A/c
If yes then maintain only GL A/c w/o valuation class OR maintain one entry with valuation class empty and GL A/c
check following
Error in service entry sheet
Re: Error in ML81N
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/grir-clearing-account-wrx-doesnt-recover-gl-account-2224137?cv=expanded
http://sap.ittoolbox.com/groups/technical-functional/sap-log-ps/problem-while-posting-service-entrysheet-in-ecc-60-version-1483547?cv=expanded#
regards
kunal

Problem when setting Reason of Rejection for a sales order using IDOC

Hi All,
I am working on a requirement where i need to put a reason for rejection as 'Item Cancelled' for a sales order via IDOC 'IDOC_INPUT_ORDCHG' in a third party scenerio where the PR is created automatically from the sales order . When the IDOC is run in the foreground I get the information message Subsequent function " 'Purchase requisition from sales document' not possible Item & was rejected "(Message V1579) and the IDOC results in a error when run in the background mode because of the same information message. The message should not appear when a sales order is being processed in the background but still the message is being displayed . Is there any way the message can be suppressed ? Thanks in Advance.
Regards,
Sowmya.

can you send the program how you create a so or po using IDOC, as i've a assignment creating PO using IDOC & then creating a sales order of the PO. and i dont know how to create a IDOC. SO IF you have sample program it would be help full
Thanxs

Problems when creating a new parameter for a parametric role

I'm trying to create a new parameter for a parametric role, but it seems that it is never updated, because the BPM engine does not return any error.
The scenario is: I have a process that has the role "Brands_Admin", the brands are populated by Web Service dynamically, then the parameters of the role would be those brands. In this case, if a new brand is registered (WS returns a new brand), I simply create a new parameter for the role through the "process administrator" of the BPM Enterprise.
I'm trying to create the new parameter as follows:
dirSession = DirectorySession.currentEngineSession;
dirOrganizationalRole = DirOrganizationalRole.fetch(session : dirSession, id : "Brands_Admin");
String[] parametricRoles = dirOrganizationalRole.parametricValues;
parametricRolesCount = parametricRoles.length();
parametricRoles[parametricRolesCount] = "NEW_BRAND";
dirOrganizationalRole.parametricValues = parametricRoles;
dirOrganizationalRole.update();
dirOrganizationalRole.refresh();
for (int i=0; i<dirOrganizationalRole.parametricValues.length(); i++) {
 logMessage(dirOrganizationalRole.parametricValues);
In the code above, the BPM Studio will print the new parameter correctly, but in next activity (like a Screenflow) when I try to get the parameters of that role again, there are only the parameters that were registered using the BPM Studio, the parameters that are created programmatically not appear.
Anyone know the reason?
An user with the same problem: http://forums.tangosol.com/forums/thread.jspa?threadID=839253&tstart=1

When a project that contains this logic to create a new parameter for a parametric role programmatically is deployed in BPM Enterprise, some strange behaviours occurs.
The first is that I cannot see through the process administrator the new parameter that was created for the parametric role.
The second is that if I create this new parameter through process administrator and associate an user to the role that contains the new parameter I cannot access the deployment process. In workspace (authenticated with user that is associated with the role that contains the new parameter) I cannot see anything about the process.

Character encoding problems when using javascript client-sdk for remoting

Hi,
I have recently downloaded LCDS to try. I was interested in using Javascript for remoting. I have a Java-based web application on the server side, and use HTML + Javascript (dataservices-client.js) to send/receive messages asynchronously in AMF format.
I can both send and receive data (not only simple types, but objects with several attributes), however when I receive data from the server side that contains special chars (e.g. á, ï), I get some gibberish in my javascript objects. This is not same when I send content to the server: All special characters are received (printed) correctly in Java (server side).
I inspired my coding with the simple example shown in https://blogs.adobe.com/LiveCycleHelp/2012/07/creating-web-applications-using-html5javascr ipt-remoting-client-sdk-with-livecycle-data-services.html
Is there any bug on the serialization?
My software version is Adobe LiveCycle es_data_services_JEE_4_7_all_win
Java container is WebLogic 11g.
Thanks
=======
Edited Apr 11 2014
In my attempts, I tried using AMFX serialization so that I could see the message in a more comprehensible format inside my browser (eg using firebug). After configuring an HTTP channel and destination in the server side, and adjusting accordingly in the client side code, the Javascript API still sends binary!
Sadly, I concluded that client-SDK isn't mature enough...
By the way, if you send an String like "&aacute" from the server, in the client you get "á"... instead of the raw "&aacute" ... they forgot escaping.

hey,
I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

Problems when trying to return information for External Content Types in Sharepoint 2013

This is my first post on the forum, until I tried on this problem but have not found anything.
When trying to return the information from the external content displays the following error:
Error retrieving data from mill. Administrators: query the server log for more information.
I do not know what else to do...

Hi,
According to your post, my understanding is that you got an error when tried to return the information from the external content.
Did the error occur when you created a new external content type or created a external list?
You can check the steps with the following articles about how to create a external content type.
http://lightningtools.com/bcs/creating-an-external-content-type-with-sharepoint-designer-2013/
http://wyldesharepoint.blogspot.in/2012/12/sharepoint-2013-setting-up-external.html
If the error occurred with the external list, you can check the steps with the following article.
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/01/08/how-to-create-external-data-column-in-sharepoint-2013.aspx
You can also check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Problem when Indicator for Alt. labelling for functional location activated

Similar Messages

Maybe you are looking for