Production quantity versus corresponding planned order

Hi Gurus,
Is there any standard report in SAP where I can check the production quantity against a given planned order?
WR,
Sreekant

Hi Srikant,
can you please elaborate on qtour requirement?
what you mean by production qty? IS it production order qty...?
Remember once planned order is converted to production order ,Plan order is deleted from system and only refernce if available in production order tables.
What is your production type.. Discerate / Rem?
Please describe your requirements in detail..

Similar Messages

  • GR quantity for the planned order(MD13)??

    Hi All,
             I have a list of planned orders(MD13) with planned quantities(PLAF table).
    Now I need a Goods receipt quantity for these planned orders, because I need to show
    the comparison between planned quantity and goods receipt quantity in the for the last month.
    I can get material documents by passing material,plant,movement type and date range to MSEG,there I can find the GR quantity. But how can I know that this GR quantity is for that particular planned order ??
    Say for example, I have planned 100units for the material m1 for the month of july.
    But actual GR quantity for this material is only 80units. 100-80 = 20 units is my comparison..
    From where can I get this 80units, hope u understand my question.
    Anyone please help me.
    Helpful answers will be rewarded
    Thanks & Regards,
    V.Raghavendra.

    Hello Raghavendra,
    there are no goods receipts for planned orders. These are converted either into production orders or purchase requisitions and then purchase orders. For production and purchase orders there are goods receipts.
    For production orders you should find the link in MSEG-AUFNR (if you really do have any scenario with GR for planned orders, this should be the same field).
    Easier, if production orders are applicable, should be to look in AFPO-WEMNG (Quantity of goods received for the order item) and compare it to AFPO-PSMNG or AFPO-PGMNG.
    You can also check in AFPO-PLNUM whether this production order is linked to your planned order.
    Regards,
    Kay

  • Characteric change in SO and corresponding planned order in APO

    Hello Experts,
    In a CDP enviornment i have a scenario where a characteristic value is changed in SO. The new values is visble in APO SO and the corresponding Planned order characteristic value is also changed with regenerative plan.
    Is there way where any change in SO characteristics would reflect in Firmed Planned Order(F) also which already exists against the SO in APO
    Regards
    Alin

    To have a UK app store account you need a bank card from a UK bank with a verifiable UK billing address
    What the heck is this for a weird rule ?????
    Since 2 weeks I have an iMac 27" i5. Some days ago I tried to download Sketchbook Express. But it seems that if you download for the first time something you have to give your billing address and creditcard data.
    Since more than a year I live in Romania, but my home country is Holland. There I have my bank account, because my pension is paid there and from there is my creditcard. But it is controllable a valid card.
    To buy my iMac with this card in Romania was no problem !! But to download F R E E software is not possible with this card.
    Another annoying point: As soon as you as you fill in your billing address, they change the language in the language of your billing address. I think it would be more polite if they asked you if you want to change the language.

  • Production Quantity  should trigger Maintenance Order -reg

    Hi,
    As of now we are using maintenance scheduling for PM work orders for the maintenance of equippments . We create maintenance plans and schedule them  and a sof now as per the schedule every 4 months once we are getting PM workorder and through that we are doing the maintenance of the equippment .
    I undertsand that there is a way to get the schedule orders as per the actual quantity produced  ,by assigning the equippment to the operation in routing of the assembly part number .And  the production quantity reaches certain value a maintenance order should be triggered, for addressing thsi what and all steps we have to execute ?
    our main issue is we are working on REM and we dont confirm any operations ? then how can the maintenance order triggering can be linked to actual production ?
    in discrete also when the order is confirmed at header level , how this is maintained
    is it not possible in case of REM to get maintenance order  when the production reaches certain set value ?
    please help
    regards,
    Madhu Kiran.

    Dear Madhu,
    Please refer the followings for your questions & answers.
    Q1. Will the system continues giving order after each 100 tonnes readings?
    Ans: Yes it will continue generating PM Order till you enter reading & reset the counter after overflow.
    Q2. If i continue recording the counter readings after 1 st maintenance , will it give once reading goes beyond 200, 2 nd maintenance order, 300 , 3 rd maintenance order like that ?
    Ans: Yes exactly the same way.
    Q3. I need to know further what settinsg are required to link all these?
    Ans: 1) Just create the performance based maintenance plan.
    2) Create equipment with measuring point. Mark it as counter. Enter the annual performance reading & overflow reading. You can create measuring point through eqipment or directly by using IK01.
    3) Schedule maintenance plan. Start the maintenance plan with last reading when the maintenance was carried out or else no maint. carried out enter reading as zero.
    4) Executr maintenance & PM Order.
    Q4. We have equipments, we can create characteristics ,link to equippment through class or create measuring point and assign to equippment which is correct ?
    Ans: Create measuring point for equipment (wherein characters are created) either through equipment or by using IK01.
    Regards.
    Sundar
    Edited by: Sundar Desai on Jan 27, 2009 9:05 AM

  • Srap quantity should reduce planned order quantity

    Hi Gurus,
    I have a scenario here and i wanted to know if this can be technically achieved .
    1.We have IDOC flowing from legacy system and it consists of both good quantities produced and scrap quantities produced .
    2.Good quantity produced must be reported as a reporting point confirmation. Scrap quantity produced must be reported as reporting point scrap.  Scrap quantity produced must also reduce the planned order planned order quantity.
    3.Function module currently calls BAPI 'BAPI_REPMANCONF1_CREATE_MTS’ to post good Pieces Produced, can the same BAPI be used to call the scrap quantity and reduce the planned order ?
    I have tried 'BAPI_PLANNEDORDER_CHANGE’ to achieve this scenario but still the planned order quantity is not getting reduced.
    I want to know the feasibility to achieve this in technical or functional side .
    Kindly help me to solve this problem , rewards would be generous enough for people who solve my problem.
    Regards,
    PKP

    Hi Santosh,
    Yes, it's true, it would simplify a lot. Unfortunately it can't be done.
    These are high-end, high value and small life-cycle components and some packaging materials. Packaging materials are relatively easy to stock for one week or more but the other components should only be stocked to a minimum level.
    Moreover, suppliers of high-end components do not feel the need to respect scheduled delivery dates because they "own" the market, so we can't be sure when stock will be available. The high demand for this components also adds more uncertainty because there might be only (unplanned) partial deliveries during the week as of production is available and distributed for us and other supplier's vendors.
    Oh, and a production lot can really be of as low as 40 units in some cases.
    Well anyway, I've tried the ATP approach but immediately run into a problem. In the morning I might be assembling a component (A) for the afternoon and I have a delivery scheduled for the morning of another component (B). I can't plan the afternoon production of a product with both components. Even being 2-3 days, in some very frequent cases we should immediately start production as soon as components arrive.
    So ATP isn't very adequate even in the shortest time-frame to plan production in this scenario.
    Thanks a lot for your input Santosh, it was worth a shot. Right now I can't see an option other than copy SAP_PP_009 to a new heuristic that reduces planned orders to component availability or to use a very small maximum lot size for these short production runs.
    Regards,
    Edgar

  • Wrong production version picked for planned order in ecc after CIF

    Dear experts,
    I am new to apo and was working on Cif of transactional data to ecc after planning run in Apo.
    we have active integration model and all the master data cifed in apo.
    we are cifing ppds ppm which is converted into snp ppm.
    The scenario is:
    We have a product FG100 at Loc1. For this product we have five alternate PPM's in APO.
    When we do SNP planning run, for some planned order it picked alternate 4 or 5 as source of supply. Which is alright.
    The problem is when we see the same planned order in ECC it shows source of supply as alternate 1. i.e. planned order in apo with alternate 4 and planned order in ecc with alternate 1.
    Is this the expected behaviour, or there is some configuration setting for this. We want that it shows the same source of supply in ecc as in SNP planned order.
    Best regards,
    AKS

    Hi Vikas/Nandkumar,
    thanks for the response, in my case the issue is that I have got two production versions in ECC. One production version is used for planning in CTM while the other version should not be considered in APO CTM for planning.
    The productionj version which I am not using for planning, I can manually attach the version in ECC to the planned order and the planned order should get CIFed to APO with the source of supply and resource details.
    Vikas after executing the report also the source of supply is not getting displayed in the planned order.
    Is their a solution by which i can achieve the above results.
    Thanks,
    Sanjog

  • Open Planned Order Quantity

    Hi Experts,
    for a particluar material I need the Open quantity of Planned orders for displaying in a custom report.
    Please suggest from which table or by logic can i fetch this quantity .
    Note: Not from any std report - i need table lable detail

    Hi
    Will this give the Open quantity of the Planned Order ( not converted ) ???
    in PLAF table only existing plan orders info will be there
    no productions orders
    Regards
    kumar

  • Planned Order for a Product not being shown

    Hi Experts!!
    I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
    Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
    I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
    Please help me out. Your help is highly appreciated. Thanks a lot!!

    Hi Srinivas,
    With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
    I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
    As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
    and COMMIT_CONTROL(should be 'E').
    Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
    Thanks,
    Santosh KB.

  • Planned order Vs Actual Production report

    Hi Experts
    We are running MRP make to stock means we maintain PIR(MD61) in system. On the basis of PIR system create planned order and we declare production against these planned orders. I need a report which show the detail of planned order and actual production declare against that planned order. Please guide.
    Regards
    Parkash Chand

    Dear Parkash,
    second possible soluction could be create a custom report using this standard Bapi BAPI_MATERIAL_STOCK_REQ_LIST in order to read MRP element and to summarize the elements desired   (DELKZ field):
    MRP Ele Ind   Object
    PP     Planned independent requirement
    FE     Production order
    Pa     Planned order
    Third possible soluction setting in customizing the writing of the MRP table MDKP for header data and MDTB for item data and create a Query on these mrp table.
    Let me know if i've been useful for you.
    Daniele

  • Original Planned order quantity

    Hi,
    I want to capture the planned order quantity. Since planned order quantity is dynamic, I cant able to capture the original planned order quantity.
    Eg: After running MRP, system gives a planned order 001 = 10,000 pcs.
    When I convert this planned order in to partial order. Partial order quantity = 1000
    Now system shows remaining planned order is 9000 pcs.
    In which table system will store the original planned order quantity of 10,000 pcs. I tried in planned order table PLAF. The field total planned order quantity (GSMNG) is dynamic. It shows the current planned order quantity only.
    Question:
    1. Is it possible to find original planned order quantity?
    2. If yes, then from which table we can see that.
    Regards / US

    MD05 info cannot be directly read from a table in a meaningful manner unless you have setup the same to be a transparent table. So to read the info you will have to use - BAPI_MATERIAL_MRP_LIST
    But I believe a better approach for your need would be to read the planned order & planned qty. from AFPO, add this to the value which you see in PLAF. This would give you the correct picture in your report, as MRP list keeps changing & you will not be able to have a reliable report if its based on MD05 data.
    Provide the above spec's to your developer & the report should be easily built.

  • How to select another BOM in Planned Order Based Production Order

    Dear PP GURUS / EXPERTS,
    I am using following Scenario: I have alternate BOM for FG and Maintaining Finished Material with Production Version in MRP4.
    Now, When I run the Forecast based Planning (MP30) and go for Single Item  Multi-Level MRP Run  (MD02 & MD04)  it takes 1st Alternate BOM.
    Now, I create the Planned Order Based Production Order (CO40), but due to some reason - WE WANT TO CHANGE THE BOM. instead of 1st BOM We want to use another BOM For Production.
    How can we achieve this.
    Please Help. THANKS IN ADVANCE.
    DSC

    WE WANT TO CHANGE THE BOM. instead of 1st BOM We want to use another BOM For Production
    create  two production version ( PV)and assign the 1PV 1st  BOm and 2 PV 2nd BOM
    System will create a Plan order for PV 1
    IF you want you can change the Production version 1 to Production version 2  in Planned order itself ( in MD11)
    Or reread the master data for production order by selecting PV 2

  • Production version of planned order

    When the planned orders are generated in PP/DS, I want to change the production version of certain planned orders. However I cannot find out where I can implement the enhancement. Anyone can help me? Thank you very much.

    Hi Rui.
    During order creation, you can use either
    BAdI /SAPAPO/PWB_SOS, Method PWB_USEX_SOS (internal table CT_SOURCES_EXTEND)
    or
    BAdI /SAPAPO/RRP_SRC_EXIT, Method RRP_USEX_SOURCE_FILTER (internal table CT_SOURCES)
    to sort the available sources of supply or to filter those that are unwanted.
    Regards,
    Tiago

  • After firming planned order, new planned order is generating in MRP run

    Hi Experts,
    I am using SAP AFS. Planning strategy is 21- MTO with Project settlement. MRP type is PD. Lte size is EX. Procurement type is X.
    We are using the production versions. Individual / collective reqmts is 1. Planning time fence is not maintained.
    In sap AFS T.Code for MRP run is /n/afs/md02. After receiving the Sales order, MD04 screen gets updated accordingly and I am running the MRP.Planned orders are generated accordingly. I am firming the planned order manually through MD04. The satr mark is also appearing.
    My problem starts now. If I am running  the MRP again for the same requirements another planned order of the same qty. is getting generated. That means after the second MRP run, I am having two planned orders (one firmed plnd order) and second is the new planned order. My requirement is that MRP should not generate any new Plnd. order / PR's if there is no new Sales order.
    The parameters for MRP run are "1" for "Create PR's", '1" for "Plng Mode" and '"1" for "scheduling ".
    I have tried in all the possible ways, but of no use. Still new plnd order is generated after firming the 1st plnd. order in MRP run.

    Thanks all for your feedback..
    @ Vishal
    1. Yes, Both Old firmed planned order and newly generated planned order have the same grid value
    2. For both the planned orders :
    Special Stock is E u2013 Orders on hand,
    Consumption is V,
    Sales order is the same (As we are using MTO , Strategy 21) and same WBS element.
    3. First planned order is not in the assigned tab of MD04. This means that has been allocated to some object. u2013 I didu2019nt got this point. Can u please elaborate?
    @ Nikhil
    1. Quantity of sales order is not reducing after firming the sales order
    2. Account assignment category for both the planned orders is u201CZu201D - Indiv.cust./project
    I have made some more observations and found the following differences between the two planned orders
    From  MD04 , keep the cursor on corresponding planned order
    & click on upward arrow ( available on bottom side of the report).
    It will show what will be the originating requirements i e. for which requirements this planned order generated.
    For Firmed planned order it is taking me to screen u201CPegged Requirements
    u201D*And the following data is present:
    Planned dates: 04.07.2010
    MRP element No. 3100001185 (Sales Order No.)
    MRP element item 100
    Scheduling No. is 1
    MRP element indicator - VC u2013 Order
    MRP element data- 3100001185/000100/0001
    Plng segment u2013 3100001185000100000
    P.O / Order Type u2013 ZX
    Rec/reqd Quantity 10
    MRP element u2013 Order
    For new planned order generated, I am going to Screen *u201CProcurement without Requirementsu201D
    *The following data is present
    Planned date 03.07.2010
    MRP element No. 0000123522 (Planned order No. of the newly generated after MRP Run)
    MRP element Ind. u2013 PA
    MRP element data 0000123522/SO
    MRP element item 1
    Scheduling No. 1
    MRP segment 20
    Plng segment u2013 3100001185000100000
    Rec/reqd Quantity 10
    P.O/Order type- KD
    MRP element u2013 Plnd Order

  • Planned Order confirmation or cost collector setting?

    Hello,
    we have implemented the planned order backflushing on the corresponding reporting steps.
    But on the ERP side its only sending material to the cost collector and not directly backflushing it againt the planned order.
    On the SAP ME help page I saw this statement:
    http://help.sap.com/saphelp_me52/helpdata/EN/4a/3ff0bf8e37420a9a96588eeb803de7/content.htm
    Depending on the settings in SAPMEINT, the corresponding planned order is confirmed in SAP ERP or the cost collector is updated. Then the standard functions for confirmation are carried out in SAP ERP.
    Where is this setting?
    Regards,
    Kai

    Hi Santhosh,
    Production Order planned costs are nothing but the order quantity will be calculated. But the product cost collector means the quantitative structure of the product means it will consider the all the components costs in the BOM contains and calculate the cost of the product OK.
    I hope it helps you OK. Any queries ping me again OK.
    Regards,
    Madhu.G

  • To build query related to SNP: Planned Order

    Hi,
    System: SCM 5.0
    Scenario: SO received at plant and planning creates PR against SO at plant and accordingly SNP:Planned Order at Vendor location. If SO is cancelled/deleted (manually), sometime only the PR gets cancelled/deleted (automatically during planning run) but corresponding SNP:Planned Orders still remains at vendor location and so the dependent requirements. PR and Planned Orders are pegged to SO so one-to-one relation is maintained.
    I could not find any reason why system is not deleting Planned Order at vendor location despite SO and PR is deleted at plant location. So I am planning to build query where SNP:Planned Orders are not pegged to any PR or SO.
    Can anyone help with list of SNP:Planned Order tables so that I can build query around it to identify ghost Planned Orders.
    Hope I was clear with my query but let me know if any further information is require.
    Thanks and regards,
    Devang

    HI Marius,
    Sorry for delay reply.
    I was working on on some other more critical issues to business.
    Finally we decided to built report to identify obsolete Planned Orders for which PR is not available in ordering plant. I have listed below logic for that report:
    Get Location ID from table /SAPAPO/LOC based on Location entered in selection screen
    Get PEGIDs from FM /SAPAPO/DM_MATLOC_GET_PEGIDS based on IV_SIMID as 000 and location id from step 1
    In FM /SAPAPO/OM_PEG_CAT_GET_ORDERS, use SIMVERSION as 000 and in Import Para IS_GEN_PARAMS insert all PEGIDs from step 2.
    From Export Para ET_PEG_INPNODE take From_OrderID and store in internal table.
    Execute T.Code /SAPAPO/RRP4 with following selection (Use Selection Variant: OBSOLETE PR and add Location as entered in Selection Screen)
    Planning Version: 000
    From: Current date – 60 days
    To: Current date +180 days
    Location: 0000201328
    Product: *
    Order Type: 1F
        6. Compare output of step 4 and step 5 and display result.
    From FM /SAPAPO/DM_MATLOC_GET_PEGIDS the output (step 4) will be Order ID (22 characters) while step 5 (T.Code /SAPAPO/RRP4) will give Planned Order number (8 character). I am not sure how to compare Internal Order ID (22 characters) for corresponding Planned Order Nos. (8 characters).
    I have not marked your post as correct answer as still need to find answer of above query.
    Thank you in advance for your guidance.
    Regards,
    Devang Shah

Maybe you are looking for