Project system related PP issue

Hi dudes,
here i have a requirement that if i assign a material to a project which is having a production BOM, i have to enter the BOM data in the project master data manually. Is there any way to get BOM data automatically picked to project master data.
thanks in advance
Robert

Hi,
Refer below thread..
/thread/917234 [original link is broken]
may be useful..
Regards,
Siva

Similar Messages

  • Version 999 Project System Plan Data Issue

    I am using transaction CJ9B to copy the Project System related plan data i.e. plan data at the WBS element level from Version 10F, period 1 to 12  in year 2010 to version 999, period 1 to 12 in year 2010. The transaction CJ9B runs successfully in the update mode. But when report CJI4 is executed for version 999, period 1 to 12 in year 2010 then we do not find plan data in sync with version 10F.
    I analysed this issue, had a meeting with end user and blanked out target version 999 using source version 9ZR for the year 2010. Then I again copied version 999 from version 10F. Still plan data in version 999 do not exist as they are in version 10F. I have checked the version 999 master data in transaction OKEV. Integrated Planning for SPL, COPA, cost center accounting and business process is active. COPY Allowed is also enabled. Version 999 is unlocked as well.
    Hence I am not sure why the copy functionality is not working fine for version 999, period 1 to 12 in year 2010.
    Can you please take a look and revert with your opinion so that this issue can be fixed ?
    Thanks,
    Umesh

    Hi,
    If you want to copy all the plan date from 10F to 999, then in Txn CJ9B
    select the indicator reset and overwrite in target version and execute in test mode.
    Regards,

  • Project system: Budget exceeded issue.

    Dear Sir or Madam,
    This issue is related to project system.  We have overall budget and annual budget.  If annual budget in a year is exhausted is it possible to make the system look at overall budget since there are sufficient funds in overall budget. 
    Thanks
    Joseph

    Hello Joseph,
    Unfortunately not. You may however change the assigned budget profile so that the overall budget is
    checked (transaction OPS9->tab "Availability Control->flag the field "overall") and rebuild availability control of the project in transaction CJBN afterwards.
    But there is definitely no "combination" of both possible.
    Greetings
    Florian

  • Project System related

    Hi,
    I have requirement is it possible or not  plz. give me replay imm. anyone.
    In Project System,    after creating the Projectdefinition can we create directly a Milestone to that Project definiton without creating WBS Element,  Network header and Network Activity.  Is it possible or not.
    if it is possible how.  is there any standard BAPIs or RFCs
    plz. anyone help me imm.  it is very urgent.
    Thanks and Regards
    T. Ganesh

    Hi,
    PS datasources are not much different than any other application. Some of the datasources are delta enabled and some are full.
    For the deltas check using RSA3 if you are able to get any data for the deltas. Also check the PS tables on the R3 side to make sure that there is delta data in them.
    Check in RSA7 to see what data is there. Check your infopackage to see if there are any selection criteria there.
    If you did an init with data transfer and the delta immediately after that then chances are that you won't get back any records. If that is the case, suggest you wait for some postings and transactions to happen and then try the delta again.
    Cheers,
    Kedar

  • IDOCs in Project System

    Hi Experts,
    Could you please advise if there are any standard IDOCs for processing project system related information? We'd like to create and update project definition and WBS elements.
    Thank you in advance,
    Aleksandra

    Hallo,
    Mainly, you create Distribution Model to distribute Master Data e.g. Material, Customers, Vendors, Accounts etc. There you can set up some filters etc.
    /Jakub
    Check this link: [Master Data Distribution|http://help.sap.com/saphelp_nw04/helpdata/en/78/2178da51ce11d189570000e829fbbd/frameset.htm]

  • Project system data source settings

    Hi All,
    I loaded all the data relating to Project Systems. The problem is any reports that are running on dates cube (0PS_C02) not returning any values.
    When i checked the SBIW (IMG on R/3) side, there are some application specific settings related to dates, duration....
    Do i need to maintain these?
    If so do i need to maintain for each value type? and load the data again?
    Cheers,
    Suresh.

    Hi Diego,
    Thanks for the reply, Yes, I looked in the Listcube transaction, I can see the cube records in the cube contents.
    But i am not report against them. Where as with other project system related cubes i was able to run the reports.
    Any help greatly appreciated.
    Regards,
    Suresh.

  • Project System - Master datasource

    Hi BW Experts,
        I am little confused about WBS Element (PSPNR and POSID). For Project System related reports, the most of the time common field is used as PSPNR. I have checked in all the datasources and it is not found.
       Can you briefly explain what is the difference between PSPNR and POSID. And how to use PSPNR in BW..
    Please suggest me..
    Thanks in advance.
    Thanks,
    Jelina.

    Please check table PSPR in ECC. There you will find the values. PSPNR is WBS Element Number whereas POSID is WBS Element Name. You will find some clue there.
    -- Sameer

  • Project System - Report Painter - Cost roll up issue

    Hi,
    We have an issue with the roll up of the costs in Report Painter report in Project Systems. The problem occurs only with those costs which have been settled to an internal order from a WBS element.
    We are using the same cost elements to settle to the Cost Center and Internal order and roll up of the costs work fine for those settled to cost center. But the roll up does not happen for the costs settled to an internal order. Would appreciate if someone can guide on how to fix this issue.
    Raj.

    Here are the values:
    Period/year     000.1900     Remainder 1900     PERIO     Period/year
    Value Type     4     Actual                                                 
    Value Type     10     Statistical Plan                                                 
    Object ind.     P     Project item                                                 
    Object ind.     1     Order plan values: appended, apportioned     9     Order values: not appended, deleted
    Debit type     1     Costs and credit-side payments                                                       
    Thanks for your help.
    Raj/

  • Asset settlement issue from Project System

    Hello everyone,
    In SAP, we have tied Project System and Fixed Asset in the sense that for each network/activity in PS we create and link an asset in Asset Accounting. In the Purchase Order, the network/activity number is assigned and all the transactions that occur through this PO (including down payment, its clearing, GR/IR)  are then settled on the specified asset when we execute settlement run at month end through CJ88.
    However, we have encountered scenarios where an asset was not timely allocated to the network/activity but the transactions were carried out through the PO. When the settlement run was executed, its impact was not visible in Asset Accounting. Later, it was realized and the asset was created and assigned. Once the asset was assigned, all the subsequent transactions through the PO were then being settled successfully. But the problem is with those transactions for which the asset number was initially not assigned.
    Is there any program that can be executed to include the impact of the previous transactions. Otherwise, suggest alternatives.
    Thanks

    Hi Thanks for your reply, But that is not relevent to this issue.
    The issue here is -
    First 2 documents has value date of 4th period and the amount is 8800
    Next document has value date of 5th period and the amount is 1200
    Now i am trying to settle 10000(8800+1200) with 5th period date. Its givign an error Settlement amount is greater than Available amount
    Will it solve if i settle 4th period with 8800 first and then 1200 with 5t period? or any other process?
    Thanks
    Yadayya

  • System relate issue

    Hi friends,
    im in guess of where to post system related issue, since this is my problem
    run --> drivers --> host file,
    i couldnt able to edit & save host file.
    Tried below steps:
    1. host --> properties --> Security --> add --> everyone --> given full control also.
    2. Not able to do that in administrator account alsoWhich is the right place to post this question.
    Regards,
    Saro
    Edited by: Saro on May 17, 2011 12:48 PM

    Hi,
    Probably in your OS provider support forum?
    Regards,
    Jari

  • What is project systems are related to fico

    hi sap gurus anybody clesrly tell me about  project systems are related to fico   ,  and what are the relations to these sap fico and ps?
    regards
    venkatareddy

    The Project System guarantees close and constant monitoring of all aspects of your project.Projects are generally part of the internal processes of a company.
    There is no orgnization structure of project system like in FI ( Company code), CO ( Controlling Area), Funds management ( FM area).  but it depends upon other.
    Therefore, The high degree of integration between the Project System (PS) and other SAP  application components means that you can plan, execute, and account for projects as part of your normal commercial procedures. This means the Project System has constant access to data in all the departments involved in the project.
    Further, in project system mostly controlling & ligistical is more important.
    Plz assign point as way of thanks

  • BI Content related to PS(Project Systems)

    Hi All,
    I want information regarding BI Content related to PS(Project Systems). Can anybody send links or documents regarding the same.
    Thanks,
    Gaurav
    Edited by: Gaurav Kanungo on Jan 8, 2008 7:47 AM

    http://help.sap.com/saphelp_nw70/helpdata/en/b4/60073c0057f057e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/1f/13fb383a094d63e10000000a11402f/content.htm

  • Project System Issues

    Dear PS Masters,
    1.Can any one tell me the scenerio of Simulation.
    Basic configuration.
    2.Can we delete whole cost plan at single shot (element wise).
    3.Is there any standard report to see the values of Costplan(cj40)..Budget(cj30)
    Reagards&Thanks
    Chandra

    Hello Chandrasai,
    For Query - 1: Follow the following steps:
    (1) Goto T.code SPRO --> IMG Menu --> Project System --> Simulation --> Stipulate Version Keys for Simulation (T.code OPUS). Over here create version keys as per your requirement.  Do not Flag for inactive input template.
    (If you tick the input mask to inactive, then no version numbers can be created in this number range.) You can cancel this indicator.
    (2) Goto T.code SPRO --> IMG Menu --> Project System --> Simulation --> Stipulate Simulation Version.
    (3) Project Version are called Screen Shots of Operative Projects and not simulation version.  Simulation version are usually used for having different Planned version of one project before the execution starts.
    (4) Now Goto T.code CJV1. Enter Simulation version key, Project Definition, Project Profile.
    (5) Choose continue.  You would see project planning board enter/edit the data and save the simulation version.
    For Query - 2: Follow the following steps:
    You need to manually clear the plan cost defined in CJ40.  There is no option to delete the plan cost at one go.
    For Query - 3: Follow the following steps:
    (1) Goto T.code CNS41. Enter the Project Definition and Execute or F8
    (2)Choose Fields or F5 and select "Project Cost Schedule" and "Budget" or any required fields.
    Please let me know if you need more clarifications.
    Thanks & Regards,
    Anish Walinjkar

  • WBS Elements not getting created in ECC Project System from CRM 7.0

    Dear all,
    We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
    1.       Set up the RFC connections between the two systems
    2.       Selected the connection type as Middleware in CRM system.
    3.       Installed the cProject Add on in CRM box.
    4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
    5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
    6.       Created and released the campaign ids being created in the CRM system.
    As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
    Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
    Thanks and Kind Regards,
    Aditya Shrivastava

    Hello Aditya,
    We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
    Some inputs related to our system,
    We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
    Your help is highly appreciated.
    Thanks & Regards,
    Sumukh Kapoor.

  • Customer Downpayment Update in Project Systems

    Hi,
    I am facing problems w.r.t. update of customer down payment update in project systems. As per standard SAP, after doing customer down payments, this will get updated in project info systems (CN41/CN41N).
    Please suggest me to fix the issue.
    Best Regards,
    Ranjan

    hi,
    Downpayment request is used to create a billing request through
    the t code DP 90.This DR can further be used to create a billing document
    say invoice.
    Actually you will be using these fundas in Resource Related Billing because that is
    where the integration between PS and SD module take place with the help of
    DR against actual resource utilized in the project.
    I hope this clarifies your question and award points if it is so.
    Do not hesitate to ask me if you have any further questions in this.
    Thanking you,
    Best Regards,
    R.Srinivasan

Maybe you are looking for