Question about pitch correction

I have the same vocal sung twice on one stereo track. Cant change that. Well, I guess I can, Pan left and pan right and bounce. But I guess I'm looking for a short cut. The two vocals waver a little. The song is in the key of D. Any suggestions on pitch correction settings for this. Thanks Bill

You can make a duplicate track & copy the region to that track. Then, below the meter of each track you see that button that is two interlocking circles? Click-hold on that to bring up a menu, select left for one track and right for the other. Put the pitch corrector plug on each track for separate processing (or use Melodyne or Autotune if you have those).
You could also set the output of the track to a bus, make two aux's with that bus as the input, and do the same button under the meter on each of those.
You'll have to tweak the pitch corrector yourself because results will be highly dependent on the material.

Similar Messages

Some questions about the correct way to recharge the zen micro batt

Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
Ok...my question--
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
I know this is a long post but can someone tell me the correct way of charging?
Thanxs!

immunophilic wrote:
Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
This is from JazzMC's FAQ right? (I added a link to this a day or two ago from the main FAQ post) I hadn't spotted this before and I don't agree with most of this. The wear and tear is minimal, but it's more a case of practicality that removing the battery is a pain. Also priming is not really that important with Lithium Ion, and topping up won't make any difference to the battery drain.
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
Look in my Nomad Primer, which is essentially a distilled version of the information from BatteryUni'versity.com. Top-up charges prolong the life of a Lithium Ion battery. These are all reference in the FAQ.
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
Because of the Micro's design there will always be a difference in the amount of power it can pull via USB vs. the drain when copying files to it. USB is slower to charge than the mains adapter, but it should charge fully given time (which could be twice as much as using the mains adapter).
There is a known issue with the battery draining on the Micro, but you should know this having read JazzMC's page. This is the reason the battery is so low the next day.

Question about gamma correction

I recently ordered prints from iPhoto that came directly off my Canon EOS Rebel XT (at max quality). The resulting photos looked very much as if they were printed at PC gamma correction rather than at Mac gamma.
Is there something else I need to set in iPhoto to get the gamma I expect?

Catherine:
Welcome to the Apple Discussions. Do you have your monitor calibrated so the 2.2 gamma? I've done that and prints now look more like the monitor presentation. I've set the monitor to the sRGB profile with the 2.2 gamma.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Question about Colour correction

Hi there
Just a quick one really, I am starting now to correct colour on a HD footage 720p and have the following options for colour correction setups in front of me: (I know I should consider other setups but have to work with what I have)
- connect an external Analog 4:3 TV via Firewire of a DV camera
- connect my DVI output to a HD TV (via HDMI)
- work on my MBP monitor
Any advice? Any other config that comes to mind.
The final output is DVD.
Thanks in advance.
Hisham

Connect an external Analog 4:3 TV via Firewire of a DV camera
Won't work. That is an SD output option, and you are using HD. Different color space...plus you can't output 720p via firewire thru a DV deck. You can only output DV that way.
connect my DVI output to a HD TV (via HDMI)
That is taking a computer monitor output to a TV...that is NOT a broadcast quality image. But it is better than option 1.
work on my MBP monitor
Won't look at ALL like what you see on TV.
None of these is ideal. But if these are the ONLY choices I opt for Option 2, DVI to HDTV. It would get you the closest. BUT, it will still look different once you make the DVD. Best to get an HD output device that is designed for this. Matrox MXO2 Mini would be PERFECT. Balance your HDTV to bars via HDMI.
Shane

BDT - Question about the correct approach.

Hi,
We are already live with SAP CRM but there is a new requirement to add a new checkbox to the BP transaction to be held against each business partner.
This flag is to be used to flag a Sold-To Party as a certain type of customer.
If I extend BUT000 by creating a new field on an append structure is this risky as we are live with CRM.
Or is a better approach to create a new Z table e.g. BP Number and Flag as the fields and enhance the BP transaction this way?
Many Thanks
David

Hi David,
For your current requirement, it is better if you try adding new fields to Business Partner through Easy Enhancement Work bench, (transaction eewb ).
Using the Easy Enhancement Workbench (EEW) for business partner in SAP CRM you can easily extend the data model of business partner by new fields or tables and integrate them in the business processes.
For more information on the steps involved in adding a new field in Business Partner and other useful information, please go through the link provided below:
[http://help.sap.com/saphelp_crm50/helpdata/en/81/1d5303c023da438e792316c9d25a84/content.htm]
Wish this is useful to you
regards
Srikantan

Pitch Correction strange problem.

Hi, hope you can help me out with this. I use Pitch Correction (guess I´ll have to wait a couple of years before Antares releases universal....) and I only use it where I need it. I bypass it and turn it on with regular and simple automation. BUT! Some crackles does appear the seconds before the plug shall turn itself on, and also the second before it shall be bypassed. This is the only plug that does this and it is very frustrating! I run a Macbook Pro with 2 G RAM and I´ve tried to set down and up buffer sizes and rebooting, reset my FirePOD and turned plugindelay compensation on and off but nothing makes any difference. Any ideas to this? I run 10.4.7 and Logic 7.2.2. Thanks.
Macbook Pro 2.0 Mac OS X (10.4.7) 2 GB RAM, PreSonus FirePOD

Strangely, I dont 'have this problem, and I'm still running LP 7.1.1.
Your suggestion, Melissa, would have been my easy and first one as well. Since you posted now, as expected, because you talked about pitch correction more often here already, there is one big concern about the method of duplicating the channel strip settings only for the "pitch correction track":
How do you compensate for the loss of high frequencies when using "Pitch Correction"?
There is definitely a significant and audible alteration in the frequency range happening when using this (and most other) plug-ins. Therefore the results are not "seamless".
Not that I want to call myself a technical expert, but I've been doing pitch correction since the early '90s on a Synclavier, and today use Melodyne, and before that the Pitch Correction plug in within LP. However, on LP, I quickly switched to Pitch & Time, using my own ears again - and achieving far better results.
The answer (and I am asked to correct a lot of vocals) is never the same with different voices, even not with different keys and the same voice.
This entire subject might be worth another thread, so, by keeping it simple, in order to make this suggestion (duplicating the channel strip settings and copying the regions that need pitch correction) work, - and this is really ballpark only, just to get the original poster somewhere ahead - I found, that using a High Shelf Filter around 10kHz with a Gain of +3dB and a Q-Factor of 0.40, followed by a 12dB High Cut Slope around 18kHz with a Q-Factor of 0.60 works pretty nicely in compensating for the frequency loss occured when using the LP plug-in "Pitch Correction". Take it from there for your individual tunes, keys and singers.
New thread, anyone?
... and of course: don't forget to right great music (in tune or not, lol)

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Questions about 1003051 - TDMS 3.0 corrections - Composite SAP Note

Experts:
We, from a big SAP shop, want to set up TDMS for ERP, BI, HCM and CRM.
We have some questions about note 1003051:
1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
b) should we install TDMS before applying enhp OR the sequence does not matter?
Thanks for your help!

1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
>This is a composite note, and contains information about various other notes related to TDMS. Refer to each note mentioned in this note individually to assess the same.
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
>Depends from note to note, Each note contains the necessary information about the system it has to be installed on.
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
>TDMS in standard supports Basis 7.0 systems. However it generally works fine with 7.01 too.
b) should we install TDMS before applying enhp OR the sequence does not matter?
>As TDMS 3.0 is only available for systems with basis 4.6C to 7.0. So install TDMS first and then the EHP.
I hope these answers help.
Regards
Pankaj.

Pitch Correction Plugin Questions

How well does the Pitch Correction plugin that comes with LE8 work on transforming voices - primarily male to female? The GarageBand Vocal Transformer effect creates a great deal of warble - which makes if fairly unusable.
Also, how does the LE8 differ from the Logic Studio Pitch Shifter II and its Vocal Transformer tool?
I am developing an animated film, and would like to create the voices myself, if possible, using software enhancements. Also, if anyone knows of other software solutions for this technique, I would greatly appreciate the information.
Thanks in advance for posting your responses.

Nicholas,
Although I haven't really tried the Pitch Correction in LE8 yet, I don't think it's ideal for creating different voices. You'd be better off with [Melodyne|http://www.celemony.com/cms>. It is available in several versions and will allow you to not only change pitches but also formants, which will really help you change your voice to sound like different people or even a woman, child, or a chipmunk.
Download a free demo and give it a try.
Ron

Another question about the pitch slider problem

Hi everybody!
Anybody can answer me with the solution for my pitch slider? When i import a MP3 from itunes, press ctrl + alt + G and go to the track editor, check the 'follow tempo & pitch' and the pitch slider won't move.
I see answers to use the AUPitch Effect, but i think it's not 'sufficient' for me... if there's an functionality, I want to use, else it's a critical bug for me...
I'm a developer too and a bug without a solution is very very bad for the developer...
Searching in Google, apple support threads and nothing.... anybody else?
Best Regards!
Vinicius P. de Souza/Brazil
Please, sorry for my poor english!

I don't think Mr Jobs reads this forum.
What do you mean by "not sufficient"? The AUPitch plugin can be tuned a lot finer than the pitch slider - the only downsides I can see are (1) that it takes up one of the effects slots and (b) that two regions on the same track can't have different pitch corrections.

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Questions about using a PDF form online

I have a client who wants to create an online version of a PDF form that they are currently using. I am currently trying to explain to them that this would be best done as an HTML web form, but I may not win this argument. I have only used PDFs for printed forms (either hand-written or using form fields) so I am not familiar with any problems that converting the form for use online would entail.
When the 'Submit' button is pressed on the form, is there a way to redirect to another web page after the data is submitted? (i.e. does the PDF have access to it's outer 'environment'?)
Are there any security issues submitting data using the PDF form as opposed to using a standard web form? (There may be sensitive data being submitted)
I'm not sure how they plan to handle the data that is submitted, but there are several options in the submitForm parameters - I am assuming that using the HTML option would submit the data in the same format as a web form would. Am I correct here?
Can the PDF be prevented from being downloaded or printed? This form should only be used to submit data to their server, not as a printed form.
Are there any other 'gotchas' that I need to look out for? Does anyone have a recommendation for a site which contains any tutorials or guidelines for using PDF forms online?

Thanks for the information.
Yes, I agree that there is less reason for it to be a PDF form (Actually, no real reason other than the original form already exists in PDF), but I am unfortunately in the position that my input in this project is not necessarily being considered (my company is following direct -and inconsistent- directions from the client, and I have no contact with the client to ask questions about what their actual needs are). I have been told to give the client the 'Tomato' that they are asking for, even though they are describing an 'Apple'.
The reason this form is not meant to be printed is that we have replaced the 'Signature' fields from the original form with checkboxes that the user must check to confirm they have 'signed' the document. If they are to print/fax/whatever the document, they should use the original form, not this one. And I am still trying to explain to them that this would be better served with an HTML web form, but I fear I am losing that battle.
I have brought up the fact that it is not 100% guaranteed that Acrobat will be available in the browser, although I can only guess that it is less than likely that anyone will not have some sort of PDF viewer available to their browser.
I will also mention that issues may arise if the file is not submitted from within the browser.

Questions about mac mini iTunes server, streaming to macbook pro, ipads, etc.

I'm thinking about getting a mac mini to work with my NAS as a iTunes server. I have a bunch of questions about this. I will have two iPhones, a few iPads, and a laptop that will be accessing the files. I have iTunes match. This is basically to keep an always on computer for hosting the music/movies. My questions are as follows . . .
#1 Are there any good, comprehensive guides to show you how to do this?
#2 Can the movies be accessed when not at home on the shared network?
#3 Can the iPads or the macbook pro download the shared movies to be stored locally?
#4 Back to #3, how will it work on my macbook pro with listening to music (I have iTunes match)? Say i go to library and I break out my macbook pro and I don't have internet. What happens if I download music while at home onto my macbook pro to listen to it when I go to the library? Will i start a new library on my macbook pro? How will that mesh with the home server when I come back.
#5 Is there a way to mirror files or folders? So something that I have on my macbook pro will also mirror on the home server.
Thanks for your help on this. I'll post any follow up questions.

seanfenton wrote:
1. I want to replace the Optical drive with a 2TB SATA. can I use this 2.5 inch?
I do not know if it is the same model number, but this one will work in your MBP:
http://eshop.macsales.com/item/SEAGATE%20OWC/ST2000LM003M/
2. I want to replace the HD with a 128GB SSD 840. When I replace these drives, will my OS still be in tact? I have never done this job before.
No. You will have to format the drives in Disk Utility>Erase to Mac OS Extended (Journaled) and then install the OSX by using the original install disks.
3.) I want to replace the ram sticks to max capacity. This is 2 2GB sticks, Correct?
No. An early 17" 2008 MBP will accept 6GB RAM with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The best sources of Mac compatible RAM are OWC and Crucial.
4.) Most difficult...
I want to extend the monitor wirelessly to a projector. I thought about using Apple TV and Airplay. However, support for airplay is for MacBooks 2011 and newer. I thought of using a PS3 and the media server, but I think this brings on a format compatibility issue. (my library is so large I could not afford to convert all my movies to MP4.) So, how would you recommend I put my extended monitor with VLC player onto a projector?
Could I possibly connect the MBP to a Mac Mini as an extension? would this work natively? I would rather use a VGA cord than F with 3rd party app BS.
Cannot help you there.
5..) I want to Bypass iTunes this time around. I would prefer to use Finder and VLC to manage all of my music. I mostly play all my music on shuffle, so, could I create a playlist on VLC with all of my music and play it randomly? (im sure this is possible but i'd like to organize all my plans with confirmation.)
You are not obligated to use iTunes.
6.) Can i upgrade the keyboard to backlit? i've read that this is possible.
All MBPs have back lighted keyboards. Your either needs a NVRAM reset or a repair.
Ciao.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

Question about pitch correction

Similar Messages

Maybe you are looking for