Remote Play Connection Issues - WiFi / Bluetooth Conflict / Interference?

I have been looking forward to this feature on my Z3c and it was finally released yesterday. Connecting to my PS4 and using the touch screen controls works flawlessly. However, as soon as I connect my DualShock 4 via Bluetooth, lag and connection issues occur. Turn off Bluetooth, and everything is fine again.
I experienced a simular issue with a Moga Bluetooth controller a few weeks ago - after it was paired with my device, my Wifi connections became intermittant and unstable, even when the device was disconnected. Eventually fixed the issue by deleting the controller pairing from the Bluetooth settings.
My point is, is there an issue with Bluetooth and Wifi conflicting with each other? I have tried changing settings on the router but I am convinced the issue is on my phone. Bluetooth works fine, Wifi is fine, but both together I believe there is an issue.
Does anyone else experience the same problem, or have a fix? I was looking forward to Remote Play with a DS4 but at the moment it is unplayable.

@pit77
I recommend that you first try it with your existing access point/router. Remote Play also works over 2.4GHz but WiFi performande depends on many factors like the access point, reception, channel width, other networks and devices that transmits on the same band (for example bluetooth devices, baby monitors, micro waves, wireless keyboards). With a 5GHz access point it's less likely to have performance issues as this band usually less crowded.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Having a connectivity issue with bluetooth in car only when using siri

Does anyone know of a fix for connectivity issues when using siri to dial a number when using bluetooth in a car? If the number is inputted manually then the call goes through. When asking siri to make the call, it starts to go through but then quickly disconnects. I noticed the problem soon after downloading IOS 8.

Apple has no fix for this. I have been in contact with Apple customer service, engineering, etc. for over 2 months now. Very disappointing, as it worked fine prior to iOS 8.0.

Another Windows 8.1 Remote Desktop Connection Issue

I want to connect to my PC running Windows 8.1 from my tablet running 8.1. I have allowed RDC in the windows firewall. I open RDC on my tablet and enter my PC computer name, KENSPC, into the Computer field and get "Remote Desktop can't connect to the
remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network.
I get the same message when I use the IP address for the PC.
My PC is wired to my router and my tablet is wireless and both use my Microsoft account for credentials. I can ping the PC from the tablet, so I know the tablet can see the PC and I can open files on the PC from the tablet. I have "Allow
Remote Assistance connections to this computer" turned on. And I have, in fact, had HP help via remote assistance. But nothing I do seems to work. The steps as specified in the Helps do not work. Any help would be appreciated.
kenfrantz at outlook dot com

Hi,
According to your description,we need to know the detail edition of your remote PC.
You can use a PC running any edition of Windows XP, Windows Vista, and Windows 7, or a PC running Windows 8, Windows RT, Windows 8.1, or Windows RT 8.1 to initiate a connection.
But the remote PC must be running one of these Windows operating systems:
Windows 8.1 Pro ,Windows 8.1 Enterprise ,Windows 8 Enterprise ,Windows 8 Pro ,Windows 7 Professional ,Windows 7 Enterprise ,Windows 7 Ultimate ,Windows Vista Business ,Windows Vista Ultimate ,Windows Vista Enterprise ,Windows XP Professional.
Also, I would like to share the following article with you:
http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-8
http://www.microsoft.com/en-us/windows/enterprise/products-and-technologies/windows-8-1/compare/default.aspx
Hope this helps.
Regards,
Kelvin Xu
TechNet Community Support

10.10.2 wifi bluetooth conflict

Hello
My MBPR 2014 mid 13" updated 10.10.2, but my wifi problem as before.
Each time when turn on Bluetooth, wifi speed become very slow. then if i turn off bluetooth, the wifi speed back to normal. how can fix it ???
Thanks !!!

So far, so good. I went from to 10.10.2 and it worked well for a while. Then my ISP provider began having connectivity problems and many errors. This seemed to trigger bad behavior in my Apple networks. Soon my network was back to a crawl.
One symptom I haven't seen reported is that once in a while when I woke my Macbook Air from sleep characters were coming from somewhere that kept filling up my password entry. I had to turn my keyboard off and go through Bluetooth discovery in order to get that to stop so that I could log in. A conflict between WiFi and Bluetooth could explain it.
In any case my network came to a crawl this evening again. I turned off my Bluetooth devices so that I could use my network. Found this post, chased the link, and it seems to have resolved my problem.

Wifi-Bluetooth conflict on Droid Razr Maxx HD?

I just noticed that there is a problem between my wifi access and and bluetooth connectivity on my Droid Raxr Maxx HD. Even when both features are set to "ON", only one of them is working. I actually need to turn bluetooth "off" and reboot in order to reactivate wifi, or turn bluetooth "on" and reboot to activate bluetooth (which then kicks me off my wifi connection). Is this a common problem?
I use a wifi hotspot for my laptop so I have a low-end data plan for my phone (the phone is linked to the hotspot for most of my high-volume data transfers). When I synch my phone to my Blueant car device, bluetooth headphones, or a bluetooth speaker, my wifi link to the hotspot disengages.

I've just spent 1.5 hrs with VZW tech support and 2 hrs with Motorola Level 2. Device is less than 24 hrs old. WiFi does not operate properly with Jelly Bean 4.1.1 // All was well with ICS 4.0.4 out of the box, then JB got pushed to me. Also have another Maxx HD user in household with 6 weeks on the device at ICS 4.0.4. No WiFi, BT issues at all. JB pushed to that device as well and is now in this same sorry state. I am pending an open case at Motorola Level 2 and JB development on their side. I believe the issue is Jelly Bean 4.1.1 as there appeared to be no significant issues at ICS 4.0.4.

Remote desktop connection issue with an RDP client while connecting to some of windows 2008 and 2003 operating system flavors and not receiving SDin value choice 26 from DomainMCSPDU

Hi Team
We have our RDP client and i came across with one issue "Expected data got 3" with this client.
This issue is getting while connecting some of below operating system flavors.
Microsoft Windows 2008 Enterprise edition
Microsoft Windows 2008 Standard edition
Microsoft Windows 2003 servers
When we are trying to get RDP to those servers with our client, getting "Expected data got 3" error. One more main thing here is the specified error is not getting for all the servers of same operating system in above list.
Able to get the RDP console for those servers using mstsc client.
When i read the [MS-RDPBCGR] specification, i found the below points
mcsSDin (variable): Variable-length PER-encoded MCS Domain PDU (DomainMCSPDU) which encapsulates an MCS Send Data Indication structure (SDin, choice 26 from DomainMCSPDU), as specified in [T125] section 11.33 (the ASN.1 structure definitions
are given in [T125] section 7, parts 7 and 10). The userData field of the MCS Send Data Indication contains a Security Header and a Valid Client License Data (section 2.2.1.12.1) structure.
In my code i am not getting SDin value as 26. Is it the problem with Remote desktop Licensing in RDP servers as specified in the specification like "The userData field of the MCS Send Data Indication contains a Security Header and a Valid
Client License Data (section 2.2.1.12.1) structure."
Could you please explain me is this issue is happening due to Licence configuration in RDP server and please provide support with server side configuration if any because our code works for other servers ?
Thanks & Regards,
Pavan G.

Hello Pavan -
Thanks for contacting Microsoft Support. I'm researching this for you and request you to please send me mail at dochelp @ Microsoft dot com so that I can share tools and techniques to collect some traces and analyze.
Thanks.
Tarun Chopra | Escalation Engineer | Open Specifications Support Team

Remote Desktop Connection Issue

Hello,
We have an issue where our reception computer has 4 RDP connections set up to access 4 other desktops in the office. The connections seem to lose some sort of connection settings periodically as when we try to launch the connections they fail. They
come up with the error of the three reasons you may not be able to connect. We have gone in and tried to connect by ip but that did not work either. We have been able to get it back and working if we rebind the computers to the domain but it seems to only
work for a short time before we have to do this again. Now another interesting thing is that we can go to one of the other desktops and connect from it to the reception computer but it for some reason will not work the other way around. We have tried configuring
the windows firewall as well as the eset firewall that is used for out Anti Virus software but nothing there seems to work. The rebinding is a temp fix but would like to try and find a permanent fix. We can remote in to some other desktops on the same network
as well from the reception computer but for some reason it has issues with these 4 computers. We also have set up all the permissions to allow access . We do not want to use a third party remote software to do this we would like to use the software that has
been provided through the operating system.
Thanks,
Zach Hartman

Hello,
We started by computer name and then tried IP address. The computers in the office have all been assigned Static IPs and it still happens. This issue does not happen at a specific time or interval and just happens when
it feels like it. It could work for a day and then stop or it could work for a month and stop. We have found that rebinding to the domain somehow temporarily resolves the issue. I looked into any group policies that could be causing an issue but we have not
of the group policies that affect RDP configured so that can pretty much be ruled out. The error We receive is as followed: "Remote
desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network,
and that remote access is enabled."
Like I said rebinding to the domain temporarily resolves it but would be nice to find a permanent solution.
Thanks in Advanced for any help
Zach

HT204291 Apple TV (3rd) to iPad 4 Air Play Connection issues

When I come home and want to connect my iPad to my Apple TV via Air Play I have to turn the iPad COMPLETELY OFF and then back on again, is there an easier way to have them recognize each other? They are on the same network. they both get internet just fine (netflix runs) they just won't talk to each other.

Sounds like an issue with the local network. Make sure router is up to date. I assume iPad and ATV are on latest firmware. Placement of router in relation to ATV can also be factor.
Other tips
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

EA6900 Remote desktop connect issues

I just did a computer upgrade now running window 7 and just connected the EA6900 wireless router for the shop. I am now having problems connecting from the home computer. A novice at this but I do try and do my own research. I have been unable to find anything that address my issue. And now not even sure it may be the router that is the issue. I did have the remote desktop hooked up before all the new equipment.
Any guidance would be appreciated.

As long as their not the home additions then that should fine (pro or better).
It's best to go into DHCP settings and reserve an ip address for the host system. Then you can connect with remote desktop using the ip address to remove any chance of DNS or computer name issues.
Remember to Restart the computer you reserved an address for so it gets the address you
Specified.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Time Capsule WDS Remote Internet Connection Issue

Hello All,
I am trying to add my new Time Capsule as a WDS remote base station on my network to add a wired connection in my basement. I already have a domed Airport Extreme as my WDS main base station and an Airport Express as my current remote base station. I turned the Express into a relay station and added the Time Capsule as my remote station but it gives me an "internet connection" error saying that the time capsule doesn't have a valid IP address. I currently have the express and time capsule in "bridge" mode. I didn't have this problem when I initially added the express as a remote station.
I am pretty much a novice at networking and was wondering if anyone could point me in the right direction on how to get this to work

Bought the time capsule in Oct 2013. I have a Sagemcom 2864 modem from Bell but used through Teksavvy. The 5 ghz has been flaky until I upgraded to Yosemite 10.10.1 I think. I had a closer look at it and it appears that the wifi is ok. I was thrown off by the wifi symbol being all animated in the menu bar. I was able to ping the time capsule via wifi. All the status lights on the modem looked ok. Next time it happens, I'll see if I can get some more details. Do you know if there's anyway to get some logs from the airport utility?

Remote desktop connection issue with an RDP client while connecting some 2008 servers and getting "unimplemented type in main loop"

Hi
For the working RDP server console we are getting the below PDU types only.
// PDU Types
RDP_PDU_DEMAND_ACTIVE = 1
RDP_PDU_CONFIRM_ACTIVE = 3
RDP_PDU_DEACTIVATE = 6
RDP_PDU_DATA = 7
Null PDU type = 0
Where as for some windows 2003 servers getting "unimplemented type in main loop 13" instead of above mentioned PDU types.
Could you please provide when we get this other PDU types ?
Thanks & Regards,
Pavan G

Hello Pavan -
I'll help you with this inquiry. By setting minencryptionlevel = 0 on server, are you able to get server->client unencrypted PDUs in network trace ? If yes, please send me the same by dropping a mail to dochelp @ Microsoft dot com.
Thanks.
Tarun Chopra | Escalation Engineer | Open Specifications Support Team

PSP, router, and modem issues with Remote Play

Background:
Verizon DSL
Westell 6100 modem
WRK54G router
PS3
PSP
I haven't seen a post on this topic yet, so I'll explain the issue. The Playstation 3 is networkable either through a wired ethernet or wireless connection. The Playstation Portable is also networkable over wifi. The PSP has always worked at hot spots for web surfing and gaming. With the release of the PS3, there was a new feature called Remote Play, which let you connect your PSP to your PS3 and stream the PS3 interface. You can manipulate the options, watch videos and listen to music, just like you are at the controls of the PS3. The PS3 has to be put in "remote play" mode for this to work.
Last week, Sony released an update that made this functionality work over the internet. For most people this worked just fine. Others had to open ports here or there, but there is a group of users that cannot connect from a hot spot, but can connect over the internet at home. The original remote play connection (before the update) was a direct connection between the PS3 and PSP. Now you can connect through your router at home (scan for your router and connect that way). This connection works since the PS3 and PSP are both connected to the same router in your home. When you go to a hotspot, you can get all the way up to the point that the PS3 streamed screen should start, but it times out.
This is taken directly from the PS3 owner's manual:
"If the PS3 system is connected to the Internet via two or more routers, communication may not work correctly."
It seems like internet connection from a hot spot doesn't work because the request for the PS3 gets lost between two routers when it gets to my home network.
Finally to my question. It seems like my Westell 6100 is functioning as a router, as is my WRK54G. When i look at my modem's settings, it is set up as a bridge protocol in routed bridge mode. Everything else I try makes me lose my internet connection.
Anybody know what I'm talking about or have any suggestions?
Thanks

A lot of PS3/PSP owners are having this issue with Remote Play. I have a WRT350N and have been through Sony forum as well as this one to know about all setups from port forwarding to giving your PS3 a static IP and placing in DMZ. I can say I had success connected via or public wi-fi but I also noticed how unstable Remote Play is. There will be times you can connect to it but if you turn your PS3 completely off (not standby) and back on you will pretty much need to setup your PSP again with the PS3 for Remote Play. The problem itself lies more with Sony and not our modem and routers except that fact that you do have to make some minor changes like disable UPnP, forward ports and etc. I own the Sony LocationFree Player which uses a similiar function like Remote Play but instead gives you control over your cable tv remotely anywhere on laptop or psp. LocationFree never failed me since day one because Sony created a DDNS for it which worked for me no matter who my carrier was or what router I have used over the years. Remote Play was introduced later for PS3 which pretty much like LocationFree but Sony doesn't provide a DDNS for it, instead we have to go through all the crazy configurations which is never stable. However you can register for a DDNS at DynDNS.org and configure your router with it which I have done before and found it to be very stable. No matter what Sony still needs to address the issue with the PS3 communication for Remote Play. You can find a lot of info here for setting up DDNS and as for Remote Play your better off going to the Playstation Forums. Good Luck!

Anyone else still having iOS 8.1 Bluetooth Connection issues.

Hi there just wanted to see if anyone is still having the Vehicle "Hands Free" Connection issues via Bluetooth on the iPhone 6? I drive a 2009 Acura TL and I am still having the connection issue. Oddly enough before the 8.1 update I was running 8.0.2 and it worked fine. Now when I get in my car and the phone connects it cripples the entire system. It won't allow me to change to the USB mode for my connected iPod and when I try to place a call via the "Hands Free" system it beeps as if it is activating and then does nothing.
I have tried everything that I can think of with no results. I was hoping there was someone out there with the same car or similar having the same problem that might have found a fix. Chime in and let me know.

I am having similar problems with Bluetooth connectivity but not with a car. I use a Planatronics Legend. Everytime that a call comes in, my Legend announces the call then immediately disconnects from my iPhone. All of this started after upgrading to ios 8.1.
Apple should not advertise fixes to problems without truly confirming the repairs.

No Tables in DW CS3 Remote MySQL Connection

Hello All,
I was hoping forum members would be able to troubleshoot a
Dreamweaver CS3/remote MySQL Connection issue I'm having.
I am successful in connecting to the database but the table
data I created in phpMyAdmin 2.6.3 does not appear in the
Application/Databases menu in DW. Instead of the name of the table,
I get "none".
Since I am new to databases, any help is greatly appreciated.
I did view older posts before submitting this one but the advice
recommended (re-installing the entire MySQL application from
scratch) is not an option. Server is SunOS running PHP 4.4.7 and
MySQL 2.0.20. I'm on Windows XP. Thanks once again.

Was this issue resolved?
I have the same problem now. DW was working fine the one day and the next when I started it it had this connection problem.
I am testing on my local PC. My sites is at http://localhost/
All my connection are working because if I go to http://localhost/index.php I can see my site and if I go to http://localhost/register.php I can even register a new user. It will include the new user details in the data base and everything is working fine. So there is nothing wrong with the connection.
In DW I do have http://localhost/ on the Local Info screen. As I said, all was working fine on the current setup the one day and the next day it did not want to work.
Seems like a very common problem.
I want to buy CS4 and surely hope that the problem has been fixed by now.

Tethering Question (Wifi, Bluetooth, and USB)

I have an iPhone 5 and am able to tether my LTE/3G connection to other devices. When I enable tethering, devices can get connected via Wifi, Bluetooth, or USB. Let's say I use my MacBook Pro to connect to all of those at once (so now the MacBook Pro is connected to the internet via Wifi, Bluetooth, AND USB). Does it use one of them over the others or does it use all of them at once to provide the fastest speeds?

Does it use one of them over the others or does it use all of them at once to provide the fastest speeds?
As has been pointed out above the Internet connection is provided by the phone through the carrier so even if the Mac did connect using all three connections, USB, WiFi and Bluetooth they would all be combined into one connection once in the phone and out to the net so there would be no speed advantage, the phine and internet connection would be the bottleneck.
In fact it is possible the speed would be lower as the phone would have to contend with the 3 connections into it.

Remote Play Connection Issues - WiFi / Bluetooth Conflict / Interference?

Similar Messages

Maybe you are looking for