SAPScript output does not reflect changes

Hi All.
I am trying to make a minor standard attribute change to
a SAPScript layout set. I want to move the upper margin of one of the windows.
The problem is that it does not matter what I do, the change (any change, even font changes) does not display when I print it.
The Layout set is correctly linked in customizing and it is transported correctly to the relevant client.
Thank you in advance

Hi Ryno,
in order to move the upper margin of one of the windows
you have to go to pages, select the page in question and then click on "page windows button" and afterwards in "standard attributes" tab you would pass from:
Window        CMR-1          Description     Sender
Window type   VAR
Left Margin   1,30   CM      Window width    9,10   CM
Upper margin <b>2,20   CM     </b> Window height   2,00   CM
to:
Left Margin   1,30   CM      Window width    9,10   CM
Upper margin <b>1,20   CM     </b> Window height   2,00   CM
Best regards.

Similar Messages

Exporting video from Premiere 2 Encore... change video in Premiere... Encore does not reflect change

Hi everyone,
I have a good question, hopefully it's a Premiere question, but it's also an Encore question.
First off, I have my video project, simple segments of video, that I've added to my timeline, and I've added a simple
title to the whole thing ( entire length of videos )
So far so good.
So what I did was export the project to Encore, where it loaded fine, and in Encore I worked on making a simple DVD menu for the movie.
I did about 2 hours on the DVD menu, and then saved the Encore project.
.... then I realized that the video project in Premiere needed some tweeking, so I went back and did that. I saved the Premiere project
and now I'm stumped as what to do next.
After I saved the newly tweeked Premiere project, I exported it to Encore, and of course, as I knew it would happen, Encore opened up
a new project with none of my menu system I had made for the DVD. Argh, now I'm very disappointed..... HOW would I go about getting
the DVD menu to work with the newly tweeked Premiere project ?
I'm guessing I'm doing something wrong, and that there is indeed a way to fix this. I'm really really hoping so.
Thanks for any help you can offer.
Dave.

Hi Dave, To be honest Colin's way is the correct way to do it and it has worked so you should probably do it that way. I just like to
take the full control back so if I do make changes I like to give it another version number and then match that version number in my
new saved Encore project taken from the original. It is also the very last thing I do as well so I just find that workflow means I
control every asset and version but no doubt about it Colin's way is the correct method and the one that allows all
changes within Adobe to reflect through. Cheers, Steve.

Changed value for Dom0 but xl does not reflect changed value

Hi.
I have updated Dom0 default value to 4096M in /boot/grub/grub.conf. However it only display a value of 2994M when I do a xl list after rebooting the host.
I have installed OVMS 3.1.1 on a Dell M620.
Any help is welcome.
Thanks.

Same here. I've been intending to open an SR about it an never have. I don't know what difference it actually makes but the documentation does recommend you do it and it doesn't reflect that its been changed.

Financial Reporting in Workspace: POV preview does not reflect changes

Hi all
after changing a report with FRStudio (a dimension has been moved to the pov) and saving it back to the repository (with the same name) we have a problem with the POV. We only have workspace users without limitations on their POV; the log in and immediatly try to open the modified report. All of them see the POV Preview, but: some of them immediatly saw the new dimension in the pov preview (so 4 boxes in this case); some of them continued to see the previous ones (3 boxes); some just see a couple of dimensions either new or old...
the only workaround I found is to create a new database connection (from workspace) to the same Essbase application and change consequently the connection the report points to. but this is not a practice applicable in a production environment... do you have any suggestion?
thank you

Hi Ruth,
My advice is dont use the Designer. The CRM Designer isnt supported by SAPCRM 5.0. Try to do all the configuration in blueprint tables.
If you have changed the layout with Designer and after you do the refresh of your fieldgroup structure then you always the designer changes will be lossed.
Regards,
Manuel
PD: I hope you can understand me.

JSP output does not change on Weblogic 5.1 / Visual Age 3.5

I'm making developmen on Weblogic 5.1 and Visual Age 3.5.
          I change a JSP and when I reload it in my browser, I can see that the
          page is actually being recompiled, and if there are errors in the
          page, error messages are being displayed.
          However, if the page compiles without the error, it displays the
          output of the previous version of the page. No matter what I do, the
          page does not reflect the changes. The only solution is restarting
          the server.
          What might be the cause of this problem?
          Thanks,
          Sadik


I'm making developmen on Weblogic 5.1 and Visual Age 3.5.
          I change a JSP and when I reload it in my browser, I can see that the
          page is actually being recompiled, and if there are errors in the
          page, error messages are being displayed.
          However, if the page compiles without the error, it displays the
          output of the previous version of the page. No matter what I do, the
          page does not reflect the changes. The only solution is restarting
          the server.
          What might be the cause of this problem?
          Thanks,
          Sadik

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

PDF output does not refresh data in BI Publisher, XML and HTML do refresh

I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
Francisco

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

Compiled CHM File Does Not Reflect New Project Name

I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
As a result, the output Help that the user sees still has the old project name in the title bar.
All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME window?
3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.)
Will any of these actions correct the problem? I appreciate any help you can give.

Welcome to our community
Try File > Project Settings.
And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

AR Down Payment Invoice Does Not Reflect in BP Master Data...

We have placed a sales order for a BP.
We select payment means and accept the payment
In the background a AP Down Payment Invoice is created
When we view the BP master data - the account ballance window does NOT reflect this "down payment"
If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
The problem is that when the final invoice is created it is not obvious that a down payment has been received. Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
It simply does not alert the user that a payment had been received.
What are we doing wrong?????\
Thank you!
Edited by: Andrew Bleier on Feb 4, 2009 1:27 AM

Keith Taylor
You are right this feature is only available in Version 2007A. There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
Please let know.
Suda

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

802.1x accounting does not reflect correct port status

Hi,
I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
Facts:
1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
2. I am doing machine authentication along with domain authentication.
3. Windows XP SP2 is used with EAP registry hacks applied.
4. PEAP/MS-CHAPv2 method is used.
Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
- first Accounting Stop for 'host/machine' User-Name
- then strange Interim Accounting with most attributes empty or missing
256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
How to deal with this issue? Any ideas?
thanks,
robert

Does your radius proxy-table is populated wrong for EAP- SIM users ?

Business area does not reflecting in IT 0001

Dear Expert,
I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
system pick up the cost center but does not reflecting the business area in infotype 0001.
i checked with FI consultant, there is proper intergation between cost center and business area.
Please tell me, how to resolved this issue.
Many Many Thanks
Urvashi

Hi Urvashi,
You will get the Default values for Company code, Personal area, Personal Sub Area and Business Area because of Account assignment infotype - IT1008 - for your position or Org Unit
check from PO10 or PO13 and infotype 1008.
You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
You can change these values on respective screens. A warning will be issued but you can overwrite them.
Regards,
HARANATH

Why do the thumbnails not reflect changes I make to pages?

I am working on a pdf in Acrobat DC.
I am working on a page with all the layers hidden.
So the thumbnail is blank
When I show a layer it appears on the page.
The thumbnail however does not change.
Why do the thumbnails not reflect changes I make to pages?

Hi Jules,
The behavior is same in Acrobat 11 as well. The thumbnails do not get refreshed till you close the document and reopen.
Regards,
Rave

Why weblogic server does not activate changes after bounce?

Hi All,
We are working with weblogic server 10.
When ever changes are made in console, saved and activated , everthing seems fine.
Once the server is bounced , last change which was made before bounce does not reflect in the console. All the changes before the last change looks good. Can someone please guide me in this?

Your changes should be written into your domain's config directory tree ( config/jdbc would hold the various jdbc pool definitions ).
Does your host / OS have some sort of delayed disk write?
Also, when you activate your change in the console, you should be able to see the changes in the config directory's files on the admin server's host

SAPScript output does not reflect changes

Similar Messages

Maybe you are looking for