Service Contract (item category D)

Hello,
I created a contract for service for painting of the building. Used docuement type WK, item category D and account assigned cost centre.
I gave at the line item level (outline level) the description as painting of building and at service specification level as painting. I am not using service master.
Now when I create a PO referencing this contracts, the item level gets copied but the service specifications short text, qty, gross price donot get copied. what short text I gave at service specification level in contract doesnot get copied in po. Interestingly, the value at item level is also zero.
Then i created another scenario by creating the service master for painting and again created the contract using the service master. still the servie specification short text is not filled. In both cases the system behaviour is same- means no service short text, no qty, no gross price get copied in po made referencing the service contract.
Is this a standard behaviour in system or something is missed out.
Pl help, as I tried everything could not locate the problem
Thanks and regards

Dear Kavita,
Can u pl. help me out??
I m also facing the same problem.
Biswajit

Similar Messages

Service contract ITEM extractor

Hello,
I found the following extractors:
0CRM_SRV_CONTRACT_H: CRM Service - Contract Header Data
0CRM_SALES_CONTR_I: Sales Contract Item
The first one gives the SERVICE contract header data, whereas the second one gives the SALES contract item data.
Now, I'm a little bit confused: Should there not be a Service contract item data extractor and a Sales contract header extractor as well?
Are the service and sales contract in fact the same techincally?
Regards,
Rikard

HI Rikard,
the datasource 0CRM_SALES_CONTR_I also provices Service Contract items , you can check the standard DSO
0CRM_CNT1 - Service Contracts (Item Data) which gets data from 0CRM_SALES_CONTR_I ,
Note that 0CRM_CNT2 - Sales Contracts (Quantity and Value) also gets the data from the same datasource
You check the ABAP logic in the start rotuine for both DSO s to understand how the data is differentiated using the
Object type
But there is no seperate datasource for Sales Contract header
Regards,
Sathya

Contract, Item category W & 'goods-receipt-based invoice verification'

Hello gurus,
In a contract item with the item category 'Material group', the indicator 'goods-receipt-based invoice verification' (field EKPO-WEBRE) is set.
But, why this should be active?
I need to tell you to my client why SAP is working in this way with item categoy = W - Material group.
Do you know where I can find this information from SAP?
Thanks in advance.
Regards,
Sandra Palomo

Thanks or the answer, but, I saw before this customizing and it does not have nothing about GR-IV, only to Good Receipt and Invoice Receipt.
Do you know where I can find this?
Why is active this GR-IV indicator in the PO when the I have a Material Group Contract (item category W)?
Regards,
Sandra Palomo

Warranty as Service Contract Item.

Hi,
in help.sap.com I've read the following sentence related to "Service Contract Items":
"element of the service contract in which you define the services or products you are providing the customer with under the terms of the service contract. A service contract item can be any of the following:
    * Service (for example, a particular task)
    * Material (for example, a spare part)
    * Time (for example, an hourly rate for a technicianu2019s time on the job)
    * Response time (how soon you are obligated to respond to a problem call)
    * Warranty (the agreed duration and coverage)
So I would be interested in using Warranty as a service contract item, but i don't know how to proceed.
Thanks in advance,
Luis.

Does anybody know the answer or should I close this message?

Add the configuration data to service contract Item

Hi Experts,
I have to assign the configuration character stics to the service contract (va43)
if we click the service contract Item ->extras->Configuration
there I need to add the characterstics.
Could any one suggest me if any function module is available for that.
Thnx,
Jaya.

What config data do you need... u need to be more specific and explanatory.. to get an answer

Service order Item category on Contract determination

Hi
We have contract determination on CRM service orders and it is working as expected. Our Service contract makes the Service order free of charge but its still generates the debit memo in ECC system with zero value.
We don't want this to happen so a work around will to have the item categories different when the Service order has a contract. These item categories will not be configured for ECC billing integration in R/3 plug-in hence no debit memo will be generated.
My question to Service gurus is that is there another way of achieving this? if not is there a way to flip the item category after contract determination without putting in any code.
Thanks and Regards
Rupesh Patil

Rupesh,
I dont think we can flip item category without coding..!. but certainly possible with coding.
Regards, Sudeep..

Service PO-Item category D and A/c assignment category K

Hello all,
I am novice in service procurement. Kindly help me understand this scenario.
Client has created service PO with item category D and assignment category K.
There is no service based IV or GR based IV clicked. If i see , services tab , in item details, it is totally blank. and in PO history, i can see all IR-L documents with 940 EUR as total, while the PO is for 1000 EUR.
Limit shown in PO is 1000 EUR. Now if we go to MIRO screen, the system suggests remaining amount as 300 EUR instead of remaining 60 EUR.
Kindly let me know your feedback on this.

MIRO

CRM Service Ticket - Item Category error - IC Webclient

Hi
Once I confirm the customer account, I click on "Service Ticket".
I'm getting the following error "No Item Category could be created". I've taken a look at a few of the Item Category Groups & Usages and none of them appear to be exactly related to a Service Ticket. I believe this maybe the issue.
Would anyone have some guidance on this.
Points will be awarded for the right info.
Many Thanks
Arden

Thanks Johnny
Do you know if this resolves the issue with the creation of the Service Ticket or does it just make it easier to link the Header & Item Level attributes.
Points awarded
Regards
Arden

To update service contract Item data

Hi Experts,
I have to create the new Item number in the customer contract, for that I am using the FM 'BAPI_CUSTOMERCONTRACT_CHANGE'.
But this fm is not sutable for my requirment.
Except the above function module is there any available to update the service contract.
Could any one please suggest me.
Thnx,
Jay.

Hi Edit,
Thanks for the reply.
Yes, i wanted to do status update in bulk for service contracts in CRM system.
Guess there are no FM to update status of service contracts in bulk.
I used FM CRM_ORDER_CHANGE_STATUS in loop to update the status.
The performance is little bad. Let me know if there is an alternative.
Thanks in advance.
Regards
Shanthi

Sales contract item category configuration

Hi,
What is the standard item category available in SAP CRM for sales contract.
What is the significance of Transaction category in Item category. I have configured BUS2000135- CRM Quantity/Value contract item for a z item category. It doesn't allow to add a partner determination which is configured for BUS2000121 Sales contract.

Hi
I just checked an item category of type BUS2000135 and it contains a field for the partner procedure in the IMG. Can you double check it? If the you can't find the field please add a screen shot of the IMG to your answer.
Best regards - Christophe

How to change Service Contract item status to I1401(Terminateddue to Produc

Hi,
This is a ISU-CRM intergration scenerio. In certain case of contract renewal, I need to change status of existing item to I1401 (Terminated due to Product Change) and add new item with status I1400 (Started due to Product Change).
But when I try to change it using class:
call method cl_crm_isu_order_change=>set_single_status
exporting
        iv_guid        = l_new_itm_guid
        iv_status      = 'I1400'
receiving
        ev_success     = l_success
then, success flag is always false and no exception is raised. Please help what am I doing wrong?
Regards,
Daman

It worked after a commit.

Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Hello
We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same.
Regards
Ankit Arora

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

Unable to change item category in Create SA with ref to contract

We have a centralised subcontracting contract (item category "L") in place for a material. The requirement is to create a scheduling agreement with reference to this contract line item item category "Blank" (Standard).
But the item category field is greyed out (display only) when we try to create scheduling agreement with refernce to contract on the "Adopt + Details" screen. And we are not able to change the item category "L" to "Blank". Is there a way we can make this item category field editable on this screen before we hit "Adopt + Details".
I have tried most of the field selection configuration, but there is no specific field selection group for this screen.
Please note that the system allows you to change the item category when you create a PO with reference to this contract.

Thanks Manu for your suggestion!
But this is the process that we need to map. Request others to respond if they have comes across such a requirement and able to address it.
Again I want to make a note here that if it is possible on POs, there should be a way to make it work for SAs.

CRM 2007 Service Contract Determinatio and returns/complaints

Hi gurus,
I'm currently struggling to set up the contract determination for our CRM 2007 for complaints and returns. I have set the flag contract determination D or F (both did not work for my tests). as well in the transaction type customizing I have set und customizing header the determination to service contract.
According to SAP help the copy control needs to be set up as well? I did not quite understand yet why, but I maintained a copy control between my contract and my return. Any special settings needed between my source contract and target return?
last step should be the copy control for item categories? I maintained both:
- Define copy control for item categories
- Define item category determination when copying
From my contract item category to my return item category.
But still I don't have any contract determination in my return.
Any hints please?

Hi Pepe,
thanks for your answer (points rewared). I managed to get it running for complaints before you answered. Now struggling to get it for our returns running as well.
I have a question for the copy control: What exactly has to be set up there? I guess I did for our complaints more then needed.
1. Copy control from contract to complaint transaction type.
2. copy control from contract item category to complaint item category
3. Define item category while copying: done the same as in step 2.
any special settings to consider for step 2?
Torsten

Service contract in service order

Hi,
I have create a service contract in VA41 (type : WV).
But when i create the service order, the service contract is not determined. This message appear :
No cost management is provided for sales document item
You have tried to assign a sales document item to the service order for
which no item costing management is provided.
Such items can not be entered for service orders.
What's missing ?
What i have to do to determinat the service contract in notification or service order CS.
Thanks for your reply.

Hi,
When u create servcie order with service contract then the item from contract must be cost management.
reason is that u r performing services against that perticular service contract,
so when u settle service order by KO88, then cost from service order flows to service contract item (Contract item hold the cost)
Now after this U need to settle service contract by VA88, to flow cost in to COPA(Profitability analysis).
Assign account assignment category as "E" in requirement class,
Maintain settlement rule SDI for service order
Maintain sttlement rule PSG for service contract.
kapil

Service Contract (item category D)

Similar Messages

Maybe you are looking for