Set PO to HOLD status

Hi Guys,
I am using SRM 4.0.
I have added a custom field in Shopping Cart & based on this field value I need to set the PO Status to "HOLD", while the PO is being created from shopping cart.
first of all can we do that ??
if yes how??
Thanks in advance.

Hi,
for sure you can create a PO with hold status.
You're using the classic or extended scenario?
Regards,
Cristiano Soares

Similar Messages

How do I post an Invoice with 'on hold' status using this BAPI?

Hey everyone,
Okay, I'm working on an interface that will take Incoming Invoice information we receive from vendors and post it into the SAP system. I'm still relatively new to ABAP, so it's a little slow-going for me...
The BAPI is IncomingInvoice. What we want to do is try to post the Incoming Invoice using the CreateFromData method. That part, I'm clear on. However, if there are any problems, the client wants us to post it with a status of 'on hold.'
I'm been doing a lot of searching and a lot of BAPI documentation reading, but I'm not finding the answer. I thought at first I could use the Change method, but it looks like I have to have an Invoice already out there in a particular status. So if the CreateFromData somehow fails and doesn't really post an Invoice, then I think using the Change method is pointless.
I thought the answer was to use the PreliminaryPostSingle method, as the documentation states that "enables you to post provisional invoice documents. Provisional invoice documents have the status 'on hold', 'on hold (from parking)', 'parked', 'parked as complete' or 'parked and released'." But here's the kicker -- it expects IMPORT parameters of the INVOICEDOCNUMBER and FISCALYEAR. But I don't have those yet, right? Why does the method tell me it can post documents with this kind of status, but it expects me to provide key fields to an Invoice that doesn't yet exist, doesn't have a field that lets me set the status, and only returns the standard "return" table?
I'm pulling my hair out on this one, guys. I'm really hoping someone out there can help out. As always, helpful posts will be duly rewarded with points. Thanks everyone!

Vyerah, sorry for the delay in the reply, but we only recently decided how to approach this. Due to further discussions about the criteria, it was decided that we wouldn't worry about the "on hold" -- if we try to post an Incoming Invoice and it fails, then it'll be reported as such in an output file.
Certainly made my life easier, as I thought I was going to have to clone the BAPI and try to get it so that it posted with an "on hold" status. I'm very, very surprised to see that, apparently, SAP doesn't provide a function or BAPI to allow you to post an Invoice as "on hold." Oh well.
Anyway, I wanted to give you the update. Thanks again!

Can I create material reservations on setting of particular user status?

I know that Reservation creation can be kept on hold by choosing Never/Create on release etc at operation level. My requirement is , At release of work order - reservation should not be created and on setting of certain user status reservation should be created!

I think, its not possible in Standard.
You can try with some development.
You can create 2 user statuses i.e., one is for normal & another one is for reservation creation. Give the authorization to change from 1st status to 2nd status only to some authorized people through Authorization group concept.
Keep "Never" as default option in PR / Reservation creation for your desired plant & order type combination.
Once you change the user status, while saving the order, check the current user status & change it to "From Release" at order level for all operations & materials.

PO Output message triggering even when it is on HOLD status

Heelo SAP Gurus,
I have come across a issue where the PO output message is triggering even when the user puts the PO on HOLD status.
It is happening randomly i.e,not for all POs.
Plesae guide me on this
Santosh

hi
check your customizaton setting for the output type triggering event also settings

Monitoring EOIO Messages stuck in AE with HOLD status?

Hi Gurus,
Scenario: IDOC -- > XI (Message split) - - > (HTTP/File)
Some times messages to File adapter are stuck in Adapter Engine with status "HOLD". Found the root cause and un-checked "Maintain order at runtime" in interface determination.
How to get alert if the EOIO messages are stuck in AE with status "HOLD"?
Please help.

Hi,
HOLD status
This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
Regards,
Sreenivas

How to STOP messages going into HOLD status very frequently

I'm facing a problem in our Testing Environment where many messages are going to HOLD Status and also there are no messages in the System Error state.
We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
But this is a very very time consuming process.
So can you please let me know if there is any solution to fix this prolem.
Thanks,
Pruthvi

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
Go the the above
Sign in. Go to the left side where it says phone numbers. Delete your number. Then save.
Your iPhone friends will now get the red exclamation point that the message didn't deliver instead of it sending. Then your iPhone friend will force the message to go through as a text by long pressing the message and choosing send as text. Once tthey do that once you're set and all other messages will automatically send as texts for them to you. You just have to hope your iPhone friends realize to force the messages through as texts the first time around but even if they don't at least they know they aren't reaching you and you aren't ignoring them.
Does that help?

Account Holder Status.

Over a period of weeks I have been trying to have my BT profile granted Account Holder status. To do so requires a 4-digit PIN. For security reasons these are sent out by snail mail, taking up to a week for each PIN. I have had seven PINs over a period of 5+ weeks, none of which has worked. Last week I received three PIN letters in two days. BT staff do not seem to know what they are doing and I was told by one supervisor that the PIN system is a shambles, which I can certainly confirm. I need to achieve account holder status in order to get access to My Extras, including BT Wi-Fi and BT Mail. I am surprised to find no reference to this problem in the forum. Are there any more fellow-sufferers out there?
My Extras shows the following error message:
"We can’t retrieve your Extras, either because you have a calling plan or a broadband service in this account or because you are not the account holder. Please let us know if you do have a calling plan or broadband service in this account and you are th..., so we can amend your profile."
Selecting the link takes you to a form relating to faulty hardware and has nothing to do with account holder status or PINs.

I tried to edit my last message, but ran out of time. It is no longer relevant in the light of what I have been trying tonight.
My problem is becoming more clearly defined and it would appear that the reason I have no access to BT Wi-Fi and BT Mail is because I do not have a BT ID based on a BT Mail address.
After writing the last message I remembered that I had not installed the BT Wi-Fi app on my new Samsung Galaxy Tab 3 so I have just done so and the app will not accept my current BT ID (which is my Mail.com email address) and password. The error message says I must be a BT Broadband customer. Reading the BT requirements again it would appear that I cannot have BT Wi-Fi unless I have as an ID a BT Mail or BT Yahoo! Mail address. The latter was deactivated by BT at my request. The fact that BT Wi-Fi is still running on my Galaxy S2 smartphone must be a hangover from my original ID based on my deactivated (or in the queue for deactivation) "*@btinternet" address.
For the record the BT ID based on my Mail.com address was set up by a BT staff member during a telephone conversation and she also suggested the password, which I am still using. Is that not a clue to the resolution of this problem? Let me have a new BT Mail address which I can use as my ID and everything will drop into place. Ha!
As an aside, I installed the BT Cloud Extra on my desktop PC and Galaxy Tab tonight. I used my Mail.com address, and it was accepted no bother at all.

Can't claim account holder status!

I have exactly the same problem that others have previously listed here, of not being able to claim account holder status on my account. I spoke to BT about multiple accounts that I had attached to my customer number and requested that all would be removed except one under my current email address. BT deleted the primary account and left me with a guest account which does not have the account holder status....cheers for that!! Now I've been waiting three weeks, on and off chat, on and off the phone, multiple emails sent and absolutely no satisfactory conclusion to the issue. Without account holder status I cannot use BTsport online or use BTcloud, thus I cannot access important backed up documents etc. How on earth can I get someone to resolve this issue if I keep getting hung up on, or re-queued in chat? This is appauling customer service for something that should be relatively easy to rectify!! Please can anyone help?

I tried to edit my last message, but ran out of time. It is no longer relevant in the light of what I have been trying tonight.
My problem is becoming more clearly defined and it would appear that the reason I have no access to BT Wi-Fi and BT Mail is because I do not have a BT ID based on a BT Mail address.
After writing the last message I remembered that I had not installed the BT Wi-Fi app on my new Samsung Galaxy Tab 3 so I have just done so and the app will not accept my current BT ID (which is my Mail.com email address) and password. The error message says I must be a BT Broadband customer. Reading the BT requirements again it would appear that I cannot have BT Wi-Fi unless I have as an ID a BT Mail or BT Yahoo! Mail address. The latter was deactivated by BT at my request. The fact that BT Wi-Fi is still running on my Galaxy S2 smartphone must be a hangover from my original ID based on my deactivated (or in the queue for deactivation) "*@btinternet" address.
For the record the BT ID based on my Mail.com address was set up by a BT staff member during a telephone conversation and she also suggested the password, which I am still using. Is that not a clue to the resolution of this problem? Let me have a new BT Mail address which I can use as my ID and everything will drop into place. Ha!
As an aside, I installed the BT Cloud Extra on my desktop PC and Galaxy Tab tonight. I used my Mail.com address, and it was accepted no bother at all.

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

Messages stuck in Holding status in Runtimeworkbench

Hi,
Some Messages are stuck in Runtime workbench of PI in Holding status,When I resend the messages they return to same status again.
The messages are sent on 15-5-2014.I could not find those messages either in SXMB_MONI or SMQ2.
Now how to resend the messages successfully.Appreciate your help in this.

Hi Gurudatta,
If it is EOIO then you can go the Messaging System and there you can find the message which is blocking the other queues. Check the first message and delete it
And go to runtime work bech ---Message Monitoring --Adapter Engine and filter Holding message and Resend/cancel the first holding message
If it is not successfull stop and start the recevier communication channel. This will work
Regards,
SK

Messages in HOLDing status

Hi Gurus,
I have a problem with messages in XI. Some of them are in a HOLD status, some work fine. There is no reason why they should be in a HOLD status. I've checked SMQ1, SMQ2 - all clear.
Is there I can do
a, process these messages (they are now in AE waiting to be written in target file)
b, to avoid this HOLD status in future
Thank you,
Olian

Hi,
In RWB -
> Message Monitoring.
Check the interface here and see what is the cause of HOLD.
if you are using FCC in you CC then may be one/more fields having problem due to incorrect data.
Also chekc RWB -
> Component Monitoring (look at receiving CC)
Regards,
Sarvesh

ON HOLD STATUS

Does anyone know what the "on hold" status means when i check the status of my repair.

Hi brockelliott80,
I am happy to help you with this. There are several possibilities, but to know the exact reason that applies to you, please contact phone support and they can pull up the status of your repair.
You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions
click here
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How to set my own gui status when i use selection-screen

how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are created

Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev

PO Hold Status

Dear All,
we have requirement like,
If i created Purchase order with reference to UN-released Purchase requisition the PO has been saved on HOLD.
I want to make validation, If my Purchase Requisition has been not released than User can not save PO on HOLD status by standard configuration.
also i don't want to remove HOLD button from PO.
Thanks & Regards,
Dishant Mistry

System will always use the hold option when you have an error message in PO or you can also use the hold function if you don't want to use the purchase order for further process.
If you don't want to remove the Hold button, then you can enhance a explicit enhancement for you PO screen.
Check the document for more details Explicit Enhancement for "Personal Settings" for an User.

..Primavera\Project Management\PM.ini cannot be set to read-write status

I have installed Primavera P6.1 in a laptop under Administrator Login.
After that, when I log in to the laptop with my user Id, primavera fails to start and gives the following message:
C:\Program Files\Primavera\Project Management\PM.ini cannot be set to read-write status.
Kindly let me know how to fix this problem.
Regards

Please tell your IT Admin to fix as following:
The following is a summary of the minimum system requirements Primavera 6.2.X requires for users to be able to access and run components of the
software :
Window Folders:
 C:\Windows\System32\
dbexpsda30.dll
dbexpint.dll
dbexpoda30.dll
DbExpPrC.dll
dbexpsda.dll
Read&Execute/Read permission for Borland DBExpress drivers
 C:\Program Files\Common Files\Borland Shared\DBExpress\DBXConnections.ini
C:\Program Files\Common Files\Borland Shared\DBExpress\DBXDrivers.ini
Read&Execute/Read/Write permissions to create and modify database alias connections
 C:\Program Files\Primavera
Read&Execute\Read permission to access files needed to run applications
 C:\Program Files\Primavera\Project Management\pm.ini
C:\Program Files\Primavera\Methodology Management\mm.ini
Read&Execute/Read/Write permission to access the ini file - required to log into the applications
 C:\Program Files\Common Files\Primavera Common
Read&Execute/Read permission to access files needed to run applications
 C:\Program Files\Common Files\Primavera Common\Java\BREBootstrap.xml
Read&Execute/Read/Write permission to change connection parameters for Claim Digger or API
(If user does not have WRITE access the Database Configuration Setup utility (C:\Program Files\Common Files\Primavera
Common\Java\dbconfig.cmd) for claim digger / API DOES connect to the database and read the configurations and will create a new configuration if
entered, but displays error "error writing to bootstrap file" and BREBootstrap.xml file will not be updated with the proper database connection information.
 Output directory for File > Export , Job Services output files and Log output files
Read&Execute/Read/Write to create and write output files
Registry Keys:
 HKEY_LOCAL_MACHINE\Software\Borland
READ
 HKEY_LOCAL_MACHINE\Software\Primavera
READ
Note: For the functions Claimdigger, Update Baselines, and Schedule Comparisons the key is opened in Read/Write/Delete mode.
 HKEY_LOCAL_MACHINE\Software\Primavera\Databases\[MM/PM]\Aliases
NOTE: By default, users have FULL CONTROL to their HKEY_CURRENT_USER\SOFTWARE registry keys
If a user does not have FULL CONTROL permission to these keys, when they create a new alias it will be stored under
HKEY_CURRENT_USER\Software\Primavera\Databases\[MM/PM]\Aliases and will be displayed and available to ONLY the user account on the
workstation that created the alias.
If user does have FULL CONTROL permission to to these keys, when they create a new alias it will be stored
under HKEY_LOCAL_MACHINE\Software\Primavera\Databases\[MM/PM]\Aliases and will be displayed and available to ALL user accounts on the
workstation.
Jawad
Novo Rail, Sydney
P6 Project Controls Co-ordinator and Administrator

Set PO to HOLD status

Similar Messages

Maybe you are looking for