SLED master data problem

Hello,
I'm using SLED and its working fine. But for one material when i carry out batch determination, batches are not selected. When i check the log the error is Batch 7865 does not correspond to selection criteria. This is the case for all batches. I checked in MSC2N and shelf life is in December2008 but still its not selecting batches. When i carryout batch determination without class, batches are displayed. What could be wrong in master data or other than that ?
Regards

Dear,
Please check the batch search procedure in MBC1 with search strategy as ME01 for your plant material and movement type then inside you need to maintain the selection criteria (Press F7) and sort rule (Cu70) for your class and main characteristics (LOBM_VFDAT) as a selection criteria for batch search. Then save the condition type and check.
Regards,
R.Brahmankar

Similar Messages

Vendor Master data problem?? urgent please

hi,
i am trying to populate the vendor master data(name) into the cube. but the data is not there in /BI0/TVENDOR table. what could be the problem? what should i do to populate the NAME in to the cube. i have done transformations in update rules with 0VENDOR.
regards

HI Venu,
If u want to use that characteristic in the cube and if u want to load the data to that characteristic then make that characteristic as a exclusive attibute and use that characteristic in the cube and in transformation give the mapping with read master data.. remember this will give u the fact but not the present truth.....
If u just want to display that vendor name as characteristic and which u dont want to depend on the main master data object then make that object as a navigation attibute....
Khaja

Master data problem

Hi BW Experts,
       We have a Sales Organization Infoobject. It contains 16 records in Source system(R/3). And when i extracted the data from Source System to BW, in PSA iam getting the same records as well as in data target (Infoobject) it shows 16 records.
        But the problem is one extra Sales Organization has come into picture which is not there in R/3. Only that Sales Organization number is coming. It does not have any attributes.
Please see the structure
R/3 DATA
Sale Comp CustInterC Cou FY Curre Curre
0001 0001            DE K4 EUR   EUR
1001 1000            IN V3 INR   INR
1000 1000            IN V3 INR   INR
1101 1100            IN V3 INR   INR
1100 1100            IN V3 INR   INR
1200 1200            IN V3 INR   INR
1300 1300            IN V3 INR   INR
1400 1400            IN V3 INR   INR
1500 1500            IN V3 INR   INR
1600 1600            IN V3 INR   INR
1700 1700            IN V3 INR   INR
2100 2100            IN V3 INR   INR
2200 2200            IN V3 INR   INR
2300 2300            IN V3 INR   INR
2400 2400            IN V3 INR   INR
5100 5100            US V3 USD   INR
PSA DATA
Data Rec.     Sales Orga     Statist. c     Company co     CustNrInte     Country     Currency     Fiscal Yea
1     1     EUR     1          DE     EUR     K4
3     1000     INR     1000          IN     INR     V3
2     1001     INR     1000          IN     INR     V3
5     1100     INR     1100          IN     INR     V3
4     1101     INR     1100          IN     INR     V3
6     1200     INR     1200          IN     INR     V3
7     1300     INR     1300          IN     INR     V3
8     1400     INR     1400          IN     INR     V3
9     1500     INR     1500          IN     INR     V3
10     1600     INR     1600          IN     INR     V3
11     1700     INR     1700          IN     INR     V3
12     2100     INR     2100          IN     INR     V3
13     2200     INR     2200          IN     INR     V3
14     2300     INR     2300          IN     INR     V3
15     2400     INR     2400          IN     INR     V3
16     5100     INR     5100          US     USD     V3
DATA TARGET (0SALESORG_ATTR)
Sales Orga     L     Company co     Country     Currency     Fiscal Yea     CustNrInte     Statist. c
1     EN     1     DE     EUR     K4          EUR
1000     EN     1000     IN     INR     V3          INR
1001     EN     1000     IN     INR     V3          INR
1100     EN     1100     IN     INR     V3          INR
1101     EN     1100     IN     INR     V3          INR
1200     EN     1200     IN     INR     V3          INR
1300     EN     1300     IN     INR     V3          INR
1301
1400     EN     1400     IN     INR     V3          INR
1500     EN     1500     IN     INR     V3          INR
1600     EN     1600     IN     INR     V3          INR
1700     EN     1700     IN     INR     V3          INR
2100     EN     2100     IN     INR     V3          INR
2200     EN     2200     IN     INR     V3          INR
2300     EN     2300     IN     INR     V3          INR
2400     EN     2400     IN     INR     V3          INR
5100     EN     5100     US     USD     V3          INR
This is the data.
Please give me the reply.
Thanks in advance.
Regards,
Anjali

Hi,
most likely the ID 1301 has been created automatically by the system (or maually by a user); meaning another IObj may have 0SALESORG as Attr with value 1301 and/or an InfoProvider (cube/ODS) may have data posted with 0SALESORG = 1301.
I suggest to perform a master data deletion with program RSDMD_DEL_BACKGROUND (SE38) or directly by right_clicking the IObj 0SALESORG.
The system will then try to delete all Master Data ID (MDIDs): those which aren't used will be deleted and those which are used won't and will be reported in the deletion protocol.
You will then have to see the protocol in SLG1:
Object          RSDMD
Subobject       MD_DEL
and see in which object your MDID 1301 is used; You'll have to check then how it has been posted there.
If you want to delete it from 0SALESORG you'll have first to delete it from the object where it is used.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Lease Out master data problem (FOV3)

Dear SAP Gurus,
I am having a problem when maintaining master data in Txn FOV3. When i put "sales grading" in Lease Out: sales based rent popup box, system doesn't cater the percentage rate. For example (these are what i entered in the master data):
Sales From       Sales Upto                     % rate
0.00         150,000.00      0.00
150,000.00         300,000.00      8.00
300,000.00         400,000.00      12.00
400,000.00         500,000.00      15.00
500,000.00         9,000,000.00      19.00
So, if the sales i maintained in txn FOU2NS is 402,890.12 the system will only take 15% instead of calculate line by line percentage rate as below:
0     to     150,000.00     -     0%     =      0
150,000.00     to     300,000.00     -     8%     =     12,000
300,000.00     to     400,000.00     -     12%     =     12,000
400,000.00     to     500,000.00     -     15%     =                    433.52
500,000.00   to                 9,000,000.00      -     19%
Total                         =     24,433.52
Is there any setting in configuration so that the system will cater or calculate as per stated above (line by line percentage rate)?
Thanking you in advance.
Regards,
Nazrul
Edited by: Nazrul_Azman - on Feb 22, 2010 9:30 AM

Hi Nazrul,
please refer to the SAP Online documentation at help.sap.com.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/fb/13592b457311d189440000e829fbbd/frameset.htm]
Regards, Franz

NewBe Query Master Data Problem

Hi Forum,
I am facing a BI newbe problem with some queries.
I defined a Characteristic InfoObject (ZSID) with two attributes (ZHOST, ZDB). From a master data table I imported some data into this InfoObject. Now when defining a query in the Query Designer, where ZSID is a Row and the two attributes are Columns, I see in the result just the ZSID objects, for the two attributes a # gets displayed.
For all InfoObjects I enabled the with masterdata checkbox
Any ideas what to change???

Hi Chris,
Check your Info object data in Maintain master data.
'display attribute' can be displayed in query,
after drag the parent characteristic into 'row' area (or 'free characteristic'), right click the characteristic and you will see 'attributes', cursor position on it and all the attributes will be shown, choose the attribute(s) to be included in query.
hope this helps.
cheers
Sunil

Generic Extraction ( Master Data ) problem

Hi Freinds,
i have created 2 views
1)ZVENDOR_ATTR ( some fields from Table LFM1 )
2)ZVENDOR_TEXT ( some fields from Tbale LFM1 & LFA1 )
Based on the above views, created data source and replicated to BI.
when i try to upload data to master data ( ZVENDOR) , i am getting the following error messages
a)Data records for package 1 selected in PSA - 302 error(s)
b)Error 4 in the update
can anyone help me, how to solve this problem ?
Points for sure
Thanks and Regards
Vijaya

Hi,
Error 4 is majorly due to converision exits mismatch.
When you created the Transfer rule there will be a box to check the conversion exits. Have you checked that and also in the Infopackage there will be a box to check conversion exits. Please check the same and try loading.
Regards
Pramod
Edited by: Pramod Manjunath on Dec 21, 2007 4:48 PM

LSMW Upload vendor master data problem

Hello,
I have to upload vendor master data with LSMW.
I'm using a batch input with the program RFBIKR00.
In the step "Create batch input session", I get the following error:
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name VENDOR was opened
FB112 Trans. 1 : No transaction code was transferred
FB016 ... Last header record ...
FB014 ... BLF00-STYPE 1
FB014 ... BLF00-TCODE /
FB014 ... BLF00-LIFNR DETES998
FB014 ... BLF00-BUKRS /
FB014 ... BLF00-EKORG /
FB014 ... BLF00-KTOKK 0001
FB013 ....Editing was terminated
Does anyone know how to solve this error?
Kind regards,
Frank

Hi ,
first up all u r not mentioning the tcode and other mandatory field values...just in the field mapping and conversion step...
click -->Extras -->Layout and select all fields
and give default values to field TCODE,and other fields also and also check whether mapping conversion with regard to source is correct or not...
If still any doubts i can clarify
Regards,
Sridhar Reddy
Message was edited by: sridhar reddy kondam
Message was edited by: sridhar reddy kondam

Item Master Data Problem

hello all,
i have an item master data record. it was created as an Purchase item checked. other tick box are unchecked during the creation of the item. now a transaction on this item has been made. PO -->> GRPO, now the time we want to withdraw the item from the Warehouse as an Inventory Item, we found out that this item master data is not an Inventory Item. its inventory count is zero. GRPO does not affect the stock in WH.
Please tell me how will i solve this one.
Thanks & best Regards.
Fidel

hello Gordon and Laurence,
Thanks a lot for the quick response.
im a quiet confuse why should i need to lock the item, what i did, i just check the inventory item check box and the system allow it. im thinking if ill just make an goods receipt to put the count in the inventory since the transaction of this item is just yet once. is this just ok? also i want to ask, since the item now is updated and inventory item already if a new transaction will occur, will this item master data behave as a normal Inventory Item like others?
please advice.
many thanks
Fidel

Material Master data problem

Hello,
In our scenario, there are 2 plants in one company code. We created a material in one plant and then extend the same in another plant also. Now if I am changing the material for one plant than this material is getting changed in other plant also and vice-versa. Even the fields which are plant dependent are also getting changed.
Please suggest the reason.
Puneet

if it really happens, then it might have its origin in using exits, BAPIs etc.
IT is certainly not standard.
But you did not tell the field for that this is happening. there are many fields at "plant-specific" views like Purchasing or storage location view which are NOT plant specific,. so when you change such field then it looks like it changes as well for the other plant.
it is possible to access the purchasing data view without entering a plant number, then you will only get the "global" fields.
try it.

Master data access problem

Hi All
I have a master data object ..it is a z object where it has customer as the key and the attributes are salesoffice, sales dist and sales group.
I am using this master data object in one of my req where in the transaction data i get only the customer and from there i am pulling the sales office,sales dist and sales group from this master data object using the option READ MASTER DATA at the transformation level in the Rule details.
The problem is that i am able to get the data for all the customer's except 5 customers but when i get in to the master data and check the sales off, sales dist and region is maintained there, but still it is not picking only for those 5 customers and for rest of the customers it is working fine..
so i thought i should be some master data problem and i deleted that master data using delete master data option with out sid's and reloaded it again and after that i reloaded the transaction data back..but still it is having the same problem but at the object level the data is there...
Can any one suggest me as to wat would the problem can be?
Please i appreciate your quick repaonses.
Regards
Shilpa

Hi Shilpa
May i suggest an alternate solution?
Instead of reading values into your infoprovider using Read master data, you can enable the attributes as navigational attributes and include them in your infoprovider. You will be able to see them in reporting and also use filters or variables on the attributes too.
You can also check if the attribute change run for the loaded master data is done before trying to run the report.
I hope this helps.
Thanks.

Master Data Delta Load failing

Hello,
We have a master data process chain that does a delta load of 0MATERIAL_ATTR, OMATERIAL_TEXT etc....
On 3/26/06 at 8:15 pm was the last time this process chain ran successfully.
On 3/27/06 at 8:15 pm the process chain failed on the first step: 0MATERIAL_ATTR (Delta Update) and thus did not process furthur.
The reason the chain failed was because the message server was down, so no BW requests were successful. i have all my other data loads running correctly now. So this Master Data problem is the last mystery I need to figure out.
When I look at the monitor for the failed 0MATERIAL_ATTR (Delta) I see a message that says "Non-updated Idocs found in Source System"
When I click 'Process manually' in the monitor. it says 'incorrect data packets are now updated again'
The chain was attempted to be ran on 3/28/06 at 2:25 pm and it failed again at the same step. The message in monitor this time was 'Sending packages from OLTP to BW lead to errors'
The chain was again attempted to be run on 3/28/06 at 5:06 pm. Again it failed at the same step. the message this time was 'Update mode R is not supported by the extraction API'.
I tried to manually run the infopackage outside of the chain and I got this message when I clicked 'Start'. "the last delta update was incorrect" Therefore, no new delta update is possible. You can cancel the request or: Attempt to load the data of the last delta update again." I click 'Request again' and I get the message: 'Update mode R is not supported by the extraction API'.
All of these loads transferred 0 records and failed.
Any advice on how I can get my master data on track again?
Thanks,
Nick

Hi Nick,
I would suggest that you do a full load to get all the data and then ReInit the process. Since it is master data, the full load and ReInit is possible with no major issues.
Re: Update mode R is not supported by the extraction API
Hope this helps...

Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

Hi all,
Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
After creating an Integration model and while activating the same am getting the following error,
" System: SCMCLNT800 User: SMART03 06/17/2006 13:32:14
Function: /SAPAPO/CIF_LOC_INBOUND
Text:Error in address data for location DC2000/ECC800 "
Could anyone provide me how to fix this?.
Regards
Bharanidharan

Hi Veera,
Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
Regards
Bharanidharan

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Problem with master data lookup in transformations

Hi,
We're experiencing a strange problem in the transformations for an Error Reporting scenario.
We've the SAP standard customer (0CUSTOMER) in DSO 2 which derives it's value from the navigational attribute of YCUSTNR (0CUSTOMER is the navigational attribute of YCUSTNR) in DSO1. But the problem here is that even when there is no entry for YCUSTNR, the 0CUSTOMER in DSO 2 returns a value.
Referential Integrity check is not employed for this scenario. Is it because of this reason that lack of master data is returning some value held in memory. I'm not sure whether it's an issue with the cache. Is there any work around for solving this problem other than the standard master data look up?
Any help in this issue would be appreciated and rewarded.
Thanks & Regards
Hari

Note 1031553 - Reading master data returns value that does not exist
will solve this problem.
Regards,
József.

Vendor Master Data LSMW problem

Hi,
I have vendor master data in XLS file. Created project in LSMW with standard batch input object 004 (Vendor Master Data), Method (0001 standard) and Program name RFBIKR00.
Other constant data:
BLF00-TCODE = 'XK01'
BLF00-LIFNR = 'FOX1220' ... 'FOX1221' etc
BLF00-BUKRS = '3800'
BLF00-EKORG = '2000'
BLF00-KTOKK = "LIEF'
other all data like (Bank detail, purchasing data, accounting data, dunning data) are coming from that single XLS file.
Problem while creating Batch Input Session: <b>"Vendor FOX1221: data retention at plant level not allowed"</b>
Why??? Reading and converting data is fine.. but still problem terminates the BDC.
Please help me out
Thanks,
Chetan Shah

Hey it is solved, just making WERKR (Data retaintion at Plant Level) = 'X'
Thanks,
Chetan Shah

SLED master data problem

Similar Messages

Maybe you are looking for